htp

curl --include \
     --no-buffer \
     --header "Connection: Upgrade" \
     --header "Upgrade: websocket" \
     --header "Host: example.com:80" \
     --header "Origin: http://example.com:80" \
     --header "Sec-WebSocket-Key: SGVsbG8sIHdvcmxkIQ==" \
     --header "Sec-WebSocket-Version: 13" \
     http://example.com:80/

gbaman

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

christianbundy

Chromium OS ft. Docker

Chromium OS is cool. Chromium OS with crouton is cooler. Chromium OS with Docker is even cooler. This is specifically a guide for the Chromebook Pixel 2 (2015), but I can't think of any reason it wouldn't work with other devices.

1. Create a build environment
2. Customize the kernel
3. Build Chromium OS
4. Flash Chromium OS to USB
5. Install Chromium OS

shreyaskarnik

• With Docker 1.8.0 shipped new log-driver for GELF via UDP, this means that the logs from Docker Container(s) can be shipped directly to the ELK stack for further analysis.
• This tutorial will illustrate how to use the GELF log-driver with Docker engine.
• Step 1: Setup ELK Stack:
  • docker run -d --name es elasticsearch
  • docker run -d --name logstash --link es:elasticsearch logstash -v /tmp/logstash.conf:/config-dir/logstash.conf logstash logstash -f /config-dir/logstash.conf
  • Note the config for Logstash can be found at this link
  • docker run --link es:elasticsearch -d kibana
• Once the ELK stack is up now let's fire up our nginx container which ships its logs to ELK stack.

• LOGSTASH_ADDRESS=$(docker inspect --format '{{ .NetworkSettings.IPAddress }}' logstash)
• `docker run -d --net=host --log-driver=gelf --log-opt gelf-address=u

udacityandroid

package com.example.android.cookies;

import android.os.Bundle;
import android.support.v7.app.AppCompatActivity;
import android.view.View;


public class MainActivity extends AppCompatActivity {

    @Override

udacityandroid

int numberOfSmoothiesTillPrize = 10;
if (numberOfSmoothiesTillPrize > 9) {
    Log.v("SmoothieActivity", "Congratulations, you get a free smoothie!");
    numberOfSmoothiesTillPrize = numberOfSmoothiesTillPrize - 10;
} else {
    Log.v("SmoothieActivity", "No free smoothie this time.");
}
Log.v("SmoothieActivity", "You currently have " + numberOfSmoothiesTillPrize + " out of 10 smoothies needed for your next free smoothie.");

udacityandroid

int numberOfEmailsInInbox = 0;
int numberOfDraftEmails = 2;
String emailMessage = "You have " + numberOfEmailsInInbox + " emails. ";
String draftMessage = "You have " + numberOfDraftEmails + " email drafts.";
if (numberOfEmailsInInbox == 0) {
    emailMessage = "You have no new messages. ";
}

if (numberOfDraftEmails == 0) {
    draftMessage = "You have no new drafts.";

udacityandroid

boolean isRaining = false;
Log.v("WeatherActivity", "Thank you for using the WhetherWeather App.");
if (isRaining) {
    Log.v("WeatherActivity", "It's raining, better bring an umbrella.");
} else {
    Log.v("WeatherActivity", "It's unlikely to rain.");
}

udacityandroid

boolean isRaining = true;
if (isRaining) {
     Log.v("WeatherActivity", "It's raining, better bring an umbrella.");
} else {
     Log.v("WeatherActivity", "It's unlikely to rain.");
}
Log.v("WeatherActivity", "Thank you for using the WhetherWeather App.");