Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Save a740122/e780997aa256538b1d17 to your computer and use it in GitHub Desktop.
Save a740122/e780997aa256538b1d17 to your computer and use it in GitHub Desktop.

OpenWrt BarrierBreaker 14.07-rc3 手记

1 外置存储 - ExtRoot

1.1 USB HDD 分区

安装依赖和工具包:
opkg install kmod-usb-storage kmod-fs-ext4 libext2fs block-mount fdisk e2fsprogs

reboot
挂载 USB HDD ,使用 fdisk /dev/sda 分成两个数据区:
  1. 分区 /dev/sda1 大小 1G ,用于保存系统数据;
  2. 分区 /dev/sda2 为剩余大小,用于保存用户数据。
使用 ext4 文件系统格式化两个分区:

(USB HDD 大小超过 21G 时,对 dev/sda2 格式化操作才需要添加 -m 1 操作。)

mkfs.ext4 -L overlay /dev/sda1
mkfs.ext4 -b 4096 -L data -m 1 /dev/sda2

重置路由至初始(出厂)状态。

1.2 挂载 USB HDD

安装依赖包并启动 fstab :
opkg install kmod-usb-storage kmod-fs-ext4 libext2fs block-mount

/etc/init.d/fstab enable

检查分区 /dev/sda1 是否存在,若不存在,reboot 一次。

挂载系统分区 /dev/sda1 :
uci add fstab mount
uci set fstab.@mount[-1].enabled=1
uci set fstab.@mount[-1].target=/overlay
uci set fstab.@mount[-1].device=/dev/sda1
uci set fstab.@mount[-1].fstype=ext4
uci commit

mount -t ext4 /dev/sda1 /mnt
cp -ar /overlay/* /mnt/

reboot 之后,df -h 检查是否挂载成功。成功时命令输出结果应包含下行内容(忽略容量和使用占比):

/dev/sda1               975.9M    140.6M    768.1M  15% /overlay
挂载 swap 虚拟内存:

(一般为内存大小两倍。)

dd if=/dev/zero of=/swap bs=1M count=128
mkswap /swap

uci add fstab swap
uci set fstab.@swap[-1].enabled=1
uci set fstab.@swap[-1].device=/swap
uci commit
挂载数据分区 /dev/sda2 :
mkdir /home

uci add fstab mount
uci set fstab.@mount[-1].enabled=1
uci set fstab.@mount[-1].target=/home
uci set fstab.@mount[-1].device=/dev/sda2
uci set fstab.@mount[-1].fstype=ext4
uci commit
确认挂载成功:

reboot 之后,free 检查 swap 是否挂载成功。成功时命令输出结果应包含下行内容(忽略使用大小):

Swap:       131068            0       131068

df -h 检查数据分区是否挂载成功。成功时命令输出结果应包含下行内容(忽略容量和使用占比):

/dev/sda2               824.7G     72.1M    816.3G   0% /home
迁移 root 家目录:
cd /
chmod 0700 root
mv root home/
ln -s home/root

2 局域网优化 - DMZ + UPnP

2.1 LAN

调整 MTU :
uci set network.lan.mtu=1492
uci commit
调整网段(略)

2.2 WAN

调整为静态地址(192.168.1.234):
uci set network.wan.proto=static
uci set network.wan.ipaddr=192.168.1.234
uci set network.wan.netmask=255.255.255.0
uci set network.wan.gateway=192.168.1.1
uci set network.wan.dns=114.114.115.115
uci commit
调整 MTU :
uci set network.wan.mtu=1492
uci commit
生效:
/etc/init.d/network restart

2.3 配置 DMZ (需光猫高级管理员权限):

在光猫中配置 DMZ 主机至 192.168.1.234 。

2.4 配置 UPnP :

opkg install luci-app-upnp

/etc/init.d/miniupnpd enable
/etc/init.d/miniupnpd start

3 科学上网 - dnsmasq + ipset + shadowsocks

3.1 配置 shadowsocks-libev

想办法从 shadowsocks 官网 下载对应芯片的 OpenWRT 包。

安装:
opkg install shadowsocks-libev-polarssl_1.4.6_ar71xx.ipk
rm -f shadowsocks-libev-polarssl_1.4.6_ar71xx.ipk

sed -e 's/ss-local/ss-redir/' /etc/init.d/shadowsocks > shadowsocks
mv -f shadowsocks /etc/init.d/shadowsocks

/etc/init.d/shadowsocks enable
vi /etc/shadowsocks.json 配置后启动(本地端口 1080):
/etc/init.d/shadowsocks start

3.2 配置 dnsmasq-full

安装:
opkg install dnsmasq-full

mkdir /etc/dnsmasq.d
echo conf-dir=/etc/dnsmasq.d > /etc/dnsmasq.conf

cat > /etc/dnsmasq.d/ipset.shadowsocks.org <<END
server=/.shadowsocks.org/208.67.220.220#443
ipset=/.shadowsocks.org/shadow
END

3.3 配置 ipset

安装(其中 1080 为 shadowsocks 本地端口):
opkg install iptables-mod-nat-extra ipset

cat > /etc/rc.local <<END
/usr/sbin/ipset -N shadow iphash

exit 0
END
cat > /etc/firewall.user <<END
/usr/sbin/iptables -t nat -A prerouting_rule -p tcp -m set --match-set shadow dst -j REDIRECT --to-port 1080
END

sh /etc/rc.local
sh /etc/firewall.user

3.4 google.com (示例)

配置:
cat > /etc/dnsmasq.d/ipset.google.com <<END
server=/.google.com/208.67.220.220#443
server=/.google.com.hk/208.67.220.220#443
server=/.google.co.jp/208.67.220.220#443
server=/.gstatic.com/208.67.220.220#443
server=/.ggpht.com/208.67.220.220#443
server=/.googleusercontent.com/208.67.220.220#443
server=/.googlecode.com/208.67.220.220#443
server=/.googleapis.com/208.67.220.220#443
server=/.gmail.com/208.67.220.220#443
server=/.google-analytics.com/208.67.220.220#443
server=/.googlevideo.com/208.67.220.220#443

ipset=/.google.com/shadow
ipset=/.google.com.hk/shadow
ipset=/.google.co.jp/shadow
ipset=/.gstatic.com/shadow
ipset=/.ggpht.com/shadow
ipset=/.googleusercontent.com/shadow
ipset=/.googlecode.com/shadow
ipset=/.googleapis.com/shadow
ipset=/.gmail.com/shadow
ipset=/.google-analytics.com/shadow
ipset=/.googlevideo.com/shadow

server=/.youtube.com/208.67.220.220#443
server=/.youtube-nocookie.com/208.67.220.220#443
server=/.ytimg.com/208.67.220.220#443

ipset=/.youtube.com/shadow
ipset=/.youtube-nocookie.com/shadow
ipset=/.ytimg.com/shadow

server=/.appspot.com/208.67.220.220#443
server=/.blogspot.com/208.67.220.220#443
server=/.blogger.com/208.67.220.220#443

ipset=/.appspot.com/shadow
ipset=/.blogspot.com/shadow
ipset=/.blogger.com/shadow
END
生效:
/etc/init.d/dnsmasq restart

4 网络存储 - lighttpd (WebDAV 暂无法实现)

4.1 替代 uhttpd

/etc/init.d/uhttpd disable
/etc/init.d/uhttpd stop

opkg install lighttpd-mod-cgi

mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.opkg
cat > /etc/lighttpd/lighttpd.conf <<END
index-file.names = ( "index.html" )
mimetype.assign = (
  ".html"  => "text/html",
  ".htm"   => "text/html",
  ".css"   => "text/css",
  ".js"    => "text/javascript",
  ".json"  => "application/json",
  ".xml"   => "text/xml",
  ".dtd"   => "text/xml",
  ".txt"   => "text/plain",
  ".bmp"   => "image/x-ms-bmp",
  ".gif"   => "image/gif",
  ".ico"   => "image/x-icon",
  ".jpeg"  => "image/jpeg",
  ".jpg"   => "image/jpeg",
  ".png"   => "image/png",
  ".svg"   => "image/svg+xml",
  ".svgz"  => "image/svg+xml",
  ".tif"   => "image/tiff",
  ".tiff"  => "image/tiff",
  ".3gp"   => "video/3gpp",
  ".3gpp"  => "video/3gpp",
  ".asf"   => "video/x-ms-asf",
  ".asx"   => "video/x-ms-asf",
  ".avi"   => "video/x-msvideo",
  ".flv"   => "video/x-flv",
  ".m4v"   => "video/mp4",
  ".mng"   => "video/x-mng",
  ".mkv"   => "video/x-matroska",
  ".mov"   => "video/quicktime",
  ".mp4"   => "video/mp4",
  ".mpe"   => "video/mpeg",
  ".mpeg"  => "video/mpeg",
  ".mpg"   => "video/mpeg",
  ".ogv"   => "video/ogg",
  ".webm"  => "video/webm",
  ".wmv"   => "video/x-ms-wmv",
  ".kar"   => "audio/midi",
  ".mid"   => "audio/midi",
  ".midi"  => "audio/midi",
  ".m4a"   => "audio/mpeg",
  ".mp2"   => "audio/mpeg",
  ".mp3"   => "audio/mpeg",
  ".mpga"  => "audio/mpeg",
  ".mpega" => "audio/mpeg",
  ".oga"   => "audio/ogg",
  ".ogg"   => "audio/ogg",
  ".ra"    => "audio/x-realaudio",
  ".spx"   => "audio/ogg",
  ".wav"   => "audio/x-wav",
  ".weba"  => "audio/webm",
  ".ai"    => "application/postscript",
  ".doc"   => "application/msword",
  ".docx"  => "application/vnd.openxmlformats-officedocument.wordprocessingml.document",
  ".eps"   => "application/postscript",
  ".ogx"   => "application/ogg",
  ".pac"   => "application/x-ns-proxy-autoconfig",
  ".pdf"   => "application/pdf",
  ".ppt"   => "application/vnd.ms-powerpoint",
  ".pptx"  => "application/vnd.openxmlformats-officedocument.presentationml.presentation",
  ".ps"    => "application/postscript",
  ".psd"   => "application/photoshop",
  ".swf"   => "application/x-shockwave-flash",
  ".xls"   => "application/vnd.ms-excel",
  ".xlsx"  => "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet",
  ".7z"    => "application/x-7z-compressed",
  ".bz2"   => "application/bzip2",
  ".dmg"   => "application/x-apple-diskimage",
  ".gz"    => "application/gzip",
  ".tar"   => "application/tar",
  ".xz"    => "application/x-xz",
  ".zip"   => "application/zip",
  ""       => "application/octet-stream"
)
server.document-root = "/www"
server.errorlog-use-syslog = "enable"
server.max-connections = 16
server.modules = ()
server.network-backend = "write"
server.pid-file = "/var/run/lighttpd.pid"
server.upload-dirs = ( "/tmp" )
static-file.exclude-extensions = ()
cgi.execute-x-only = "enable"
cgi.assign = ()
include "luci.conf"
END
cat > /etc/lighttpd/luci.conf <<END
server.modules += ( "mod_cgi" )

\$HTTP["url"] =~ "^/cgi-bin/luci($|/)" {
  cgi.assign += (
    "cgi-bin/luci" => ""
  )
}
END

/etc/init.d/lighttpd enable
/etc/init.d/lighttpd start

4.2 支持 WebDAV

(Lighttpd 对 WebDAV 最新规范地实现度也不足 100% ,以后再找找有没有更好的办法…)

5 家庭多媒体共享 - minidlna + pure-ftpd

5.1 安装 minidlna

opkg install minidlna

mkdir -p /home/dlna/data
mkdir /home/dlna/db

uci set minidlna.config.db_dir=/home/dlna/db
uci set minidlna.config.log_dir=/home/dlna
uci delete minidlna.config.media_dir
uci add_list minidlna.config.media_dir=/home/dlna/data
uci commit

/etc/init.d/minidlna enable
/etc/init.d/minidlna start

5.2 安装 pure-ftpd

opkg install pure-ftpd

uci set pure-ftpd.@pure-ftpd[-1].chrooteveryone=0
uci set pure-ftpd.@pure-ftpd[-1].enabled=1
uci commit

/etc/init.d/pure-ftpd enable
/etc/init.d/pure-ftpd start

6 脱机下载 - aria2

6.1 安装 aria2

官方源中的版本阉割掉了 BitTorrent 下载功能 :-( 所以得从 南浦月 的帖子 《luci-app-aria2、yaaw、aria2-1.18.3下载》 下载相应芯片的包。

(BT 下载速度非常差,原因有待深入研究…)

opkg install aria2_1.18.3-1_ar71xx.ipk

mkdir -p /home/aria/data
touch /home/aria/session
touch /home/aria/dht

cat > /etc/aria2.conf <<END
log=/home/aria/info.log
dir=/home/aria/data
file-allocation=trunc
continue=true
input-file=/home/aria/session
deferred-input=true
max-concurrent-downloads=10
quiet=false
log-level=error
remote-time=true
enable-rpc=true
rpc-listen-all=true
rpc-allow-origin-all=true
rpc-save-upload-metadata=true
disable-ipv6=true
save-session=/home/aria/session
max-connection-per-server=5
min-split-size=5M
max-download-result=100
retry-wait=15
disk-cache=64M
save-session-interval=60
user-agent=uTorrent/341(109279400)(30888)
max-overall-upload-limit=16K
listen-port=6801-6899
follow-torrent=true
seed-time=1440
seed-ratio=0
peer-id-prefix=-UT341-
enable-peer-exchange=true
enable-dht=true
dht-listen-port=6801-6899
bt-seed-unverified=true
bt-max-peers=96
bt-save-metadata=true
bt-enable-lpd=true
END
cat > bt-tracker <<END
bt-tracker=
http://anisaishuu.de:2710/announce,
http://bigfoot1942.sektori.org:6969/announce,
http://bt.careland.com.cn:6969/announce,
http://exodus.desync.com/announce,
http://exodus.desync.com:6969/announce,
http://hdreactor.org:2710/announce,
http://i.bandito.org/announce,
http://shadowshq.yi.org:6969/announce.php,
http://tracker.ex.ua/announce,
http://tracker.nwps.ws:6969/announce,
http://tracker.trackerfix.com:80/announce,
http://tracker2.torrentino.com/announce,
http://tracker3.torrentino.com/announce
END
awk 'BEGIN{ORS=""}1;END{print"\n"}' bt-tracker >> /etc/aria2.conf
rm -f bt-tracker
cat > /etc/init.d/aria2 <<END
#!/bin/sh /etc/rc.common

START=95

SERVICE_USE_PID=1
SERVICE_WRITE_PID=1
SERVICE_DAEMONIZE=1

start() {
    service_start /usr/bin/aria2c --conf-path=/etc/aria2.conf
}

stop() {
    service_stop /usr/bin/aria2c
}
END

/etc/init.d/aria2 enable
/etc/init.d/aria2 start

uci add firewall rule
uci set firewall.@rule[-1].name=Allow-Aria2-RPC
uci set firewall.@rule[-1].src=wan
uci set firewall.@rule[-1].proto=tcp
uci set firewall.@rule[-1].dest_port=6800
uci set firewall.@rule[-1].target=ACCEPT
uci add firewall rule
uci set firewall.@rule[-1].name=Allow-Aria2-BT
uci set firewall.@rule[-1].src=wan
uci set firewall.@rule[-1].proto="tcp udp"
uci set firewall.@rule[-1].dest_port=6801-6899
uci set firewall.@rule[-1].target=ACCEPT
uci commit

/etc/init.d/firewall restart

6.2 安装 WebUI

yaaw 项目官网 下载 zip 包并上传至路由器。

opkg install unzip

cd /home/aria
mv /root/yaaw-master.zip .
unzip yaaw-master.zip
rm -f yaaw-master.zip
mv yaaw-master webui
cd /www
ln -s /home/aria/webui aria

9 远程控制 - DDNS

9.1 3322

配置计划任务(USER、PASSWORD、DOMAIN 自填):
echo "* * * * * /usr/bin/wget -qO - 'http://<USER>:<PASSWORD>@members.3322.net/dyndns/update?hostname=<DOMAIN>' > /dev/null 2>&1" > /etc/crontabs/root

9.2 外部 SSH 访问

uci add firewall rule
uci set firewall.@rule[-1].name=Allow-SSH
uci set firewall.@rule[-1].proto=tcp
uci set firewall.@rule[-1].src=wan
uci set firewall.@rule[-1].dest_port=22
uci set firewall.@rule[-1].target=ACCEPT
uci commit

9.3 外部 HTTP 访问

(光猫会占很不智能地占用 80 端口…所以采用 86 端口。)

echo '/usr/sbin/iptables -t nat -A prerouting_rule -p tcp -d 192.168.1.234 --dport 86 -j REDIRECT --to-port 80' >> /etc/firewall.user

uci add firewall rule
uci set firewall.@rule[-1].name=Allow-HTTP
uci set firewall.@rule[-1].src=wan
uci set firewall.@rule[-1].proto=tcp
uci set firewall.@rule[-1].dest_port=86
uci set firewall.@rule[-1].target=ACCEPT
uci commit

/etc/init.d/firewall restart
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment