Skip to content

Instantly share code, notes, and snippets.

@aarongough
Last active January 18, 2022 16:02
Show Gist options
  • Save aarongough/f95acf06f7964c34750c4dba054b1855 to your computer and use it in GitHub Desktop.
Save aarongough/f95acf06f7964c34750c4dba054b1855 to your computer and use it in GitHub Desktop.

HAAS Acceleration Calculations

VF3

  • Y AXIS: Mits 900W Servo, 1500 Rated RPM, 3000 Max RPM, 5.39NM
  • Ballscrew: 40MM DIA 8MM Pitch
  • Max load: 3500 lb (1588 kg)
  • Max thrust: 2550 lbf (11343 N)
  • Advertised max feedrate: 1000 ipm
  • Calculated max feedrate (max rpm * pitch): 944 ipm
  • Max cceleration with rated load (+ 800lb saddle/table): 11343 / (1588 + 362) = 5.81 m/s2 (0.59 G)
  • Acceleration with VF3SS max load (+ 800lb saddle/table): 11343 / (794 + 362) = 9.81 m/s2 (1.00G)
  • Acceleation with 500lb (227kg) load (+ 800lb saddle/table): 11343 / (227 + 362) = 19.25 m/s2 (1.96G)

VF3SS

  • Y AXIS: Mits 1.3KW Servo, 1500 Rated RPM, 3000 Max RPM, 8.34NM
  • Ballscrew: 40MM DIA 12MM Pitch
  • Max load: 1750 lb (794 kg)
  • Max thrust: 3085 lbf (13723 N)
  • Advertised max feedrate: 1400 ipm
  • Calculated max feedrate (max rpm * pitch): 1417 ipm
  • Acceleration with max load (+ 800lb saddle/table): 13723 / (794 + 362) = 11.87 m/s2 (1.21G)
  • Acceleation with 500lb (227kg) load (+ 800lb saddle/table): 13723 / (227 + 362) = 23.29 m/s2 (2.37G)

VM3

  • Y AXIS: Yaskawa 1.3KW Servo, 1500 Rated RPM, 3000 Max RPM, 8.34NM
  • Ballscrew: 40MM DIA 6MM Pitch
  • Max load: 4000 lb (1814 kg)
  • Max thrust: 4100 lbf (18238 N)
  • Advertised max feedrate: 710 ipm
  • Calculated max feedrate (max rpm * pitch): 708 ipm
  • Acceleration with max load (+ 800lb saddle/table): 18238 / (1814 + 362) = 8.38 m/s2 (0.84G)
  • Acceleration with VF3SS max load (+ 800lb saddle/table): 18238 / (794 + 362) = 15.78 m/s2 (1.60G)
  • Acceleation with 500lb (227kg) load (+ 800lb saddle/table): 18238 / (227 + 362) = 30.96 m/s2 (3.16G)

References:

@friesendrywall
Copy link

Are these next gen? If not, could you post the accel params used to arrive at these figures?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment