Created
August 2, 2012 21:07
-
-
Save aaronky/3240665 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
sd 11:0:0:0: [sdc] Unhandled error code | |
sd 11:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK | |
sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 d6 6f 27 20 00 00 10 00 | |
end_request: I/O error, dev sdc, sector 3597608736 | |
sd 11:0:0:0: [sdc] Unhandled error code | |
sd 11:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK | |
sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 d6 6f 27 30 00 00 f0 00 | |
end_request: I/O error, dev sdc, sector 3597608752 | |
sd 11:0:0:0: [sdc] Unhandled error code | |
sd 11:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK | |
sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 d6 6f 28 20 00 00 10 00 | |
end_request: I/O error, dev sdc, sector 3597608992 | |
sd 11:0:0:0: [sdc] Unhandled error code | |
sd 11:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK | |
sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 d6 6f 27 20 00 00 08 00 | |
end_request: I/O error, dev sdc, sector 3597608736 | |
sd 11:0:0:0: [sdc] Unhandled error code | |
sd 11:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK | |
sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 d6 6f 27 20 00 00 08 00 | |
end_request: I/O error, dev sdc, sector 3597608736 | |
sd 11:0:0:0: [sdc] Unhandled error code | |
sd 11:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK | |
sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 d6 6f 28 30 00 00 10 00 | |
end_request: I/O error, dev sdc, sector 3597609008 | |
sd 11:0:0:0: [sdc] Unhandled error code | |
sd 11:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK | |
sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 d6 6f 27 30 00 00 08 00 | |
end_request: I/O error, dev sdc, sector 3597608752 | |
usb 2-1: new high speed USB device using ehci_hcd and address 7 | |
scsi12 : usb-storage 2-1:1.0 | |
scsi 12:0:0:0: Direct-Access WD My Book 111A 2019 PQ: 0 ANSI: 4 | |
sd 12:0:0:0: Attached scsi generic sg2 type 0 | |
sd 12:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). | |
sd 12:0:0:0: [sdd] 5860466688 512-byte logical blocks: (3.00 TB/2.72 TiB) | |
sd 12:0:0:0: [sdd] 4096-byte physical blocks | |
sd 12:0:0:0: [sdd] Write Protect is off | |
sd 12:0:0:0: [sdd] Mode Sense: 2b 00 10 08 | |
sd 12:0:0:0: [sdd] Assuming drive cache: write through | |
sd 12:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). | |
sd 12:0:0:0: [sdd] Assuming drive cache: write through | |
sdd: sdd2 | |
sd 12:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). | |
sd 12:0:0:0: [sdd] Assuming drive cache: write through | |
sd 12:0:0:0: [sdd] Attached SCSI disk | |
EXT2-fs (sdc2): previous I/O error to superblock detected | |
EXT2-fs (sdc2): error: ext2_get_inode: unable to read inode block - inode=109764609, block=439058434 | |
EXT2-fs (sdc2): previous I/O error to superblock detected | |
EXT2-fs (sdc2): error: ext2_get_inode: unable to read inode block - inode=109764609, block=439058434 | |
EXT2-fs (sdc2): previous I/O error to superblock detected | |
EXT2-fs (sdc2): error: ext2_get_inode: unable to read inode block - inode=109764609, block=439058434 | |
EXT2-fs (sdc2): previous I/O error to superblock detected | |
EXT2-fs (sdc2): error: ext2_get_inode: unable to read inode block - inode=109764609, block=439058434 | |
EXT2-fs (sdc2): previous I/O error to superblock detected | |
EXT2-fs (sdc2): error: ext2_get_inode: unable to read inode block - inode=109764609, block=439058434 | |
EXT2-fs (sdc2): previous I/O error to superblock detected | |
EXT2-fs (sdc2): error: ext2_get_inode: unable to read inode block - inode=109764609, block=439058434 | |
EXT2-fs (sdc2): previous I/O error to superblock detected | |
EXT2-fs (sdc2): error: ext2_get_inode: unable to read inode block - inode=109764609, block=439058434 | |
EXT2-fs (sdc2): previous I/O error to superblock detected | |
EXT2-fs (sdc2): error: ext2_readdir: bad page in #109756417 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment