Skip to content

Instantly share code, notes, and snippets.

@abbbi
Last active March 8, 2022 15:34
Show Gist options
  • Save abbbi/237127ff8333978722dd4a75fe3f728c to your computer and use it in GitHub Desktop.
Save abbbi/237127ff8333978722dd4a75fe3f728c to your computer and use it in GitHub Desktop.
Mr. Mackey booting linux 2.0 in latest southpark episode,
It seems they used the output of the example kernel
messages as provided here:
https://docstore.mik.ua/orelly/linux/run/ch05_03.htm
--
Console: 16 point font, 480 scans
Console: colour VGA+ 80x30, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fb1d0
pcibios_init : BIOS32 Service Directory entry at 0xfb5a0
pcibios_init : PCI BIOS revision 2.00 entry at 0xfb5d0
Probing PCI hardware.
Calibrating delay loop.. ok - 36.04 BogoMIPS
Memory: 14984k/16384k available (552k kernel code, 384k reserved,\
464k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error\
reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ... ... done
Linux version 2.0.35 (root@rabbit) (gcc version egcs-2.90.29\
980515 (egcs-1.0.3 release)) #3 Fri Nov 13 15:07:45 CET 1998
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
APM BIOS not found.
Real Time Clock Driver v1.09
Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 11, DMA priority 5
scsi0 : Adaptec 1542
scsi : 1 host.
Vendor: IBM Model: DORS-32160 Rev: WA0A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SANYO Model: CRD-254S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4226725 [2063 MB]\
[2.1 GB]
Partition check:
sda: sda1 sda2 sda3
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
lp1 at 0x0378, (polling)
3c59x.c:v0.99E 5/12/98 Donald Becker http://cesdis.gsfc.nasa.gov/\
linux/drivers/vortex.html
eth0: 3Com 3c905B Cyclone 100baseTx at 0x6000, 00:10:4b:45:1d:53,\
IRQ 12
8K byte-wide RAM 5:3 Rx:Tx split, 10baseT interface.
Enabling bus-master transmits and whole-frame receives.
ISDN subsystem Rev: 1.44/1.41/1.47/1.28/none loaded
HiSax: Driver for Siemens chip set ISDN cards
HiSax: Version 2.1
HiSax: Revisions 1.15/1.10/1.10/1.30/1.8
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=teles (0)
HiSax: Teles IO driver Rev. 1.11
HiSax: Teles 16.3 config irq:5 isac:980 cfg:d80
HiSax: hscx A:180 hscx B:580
Teles3: HSCX version A: V2.1 B: V2.1
Teles3: ISAC 2086/2186 V1.1
HiSax: DSS1 Rev. 1.16
HiSax: 2 channels added
HiSax: module installed
inserting floppy driver for 2.0.35
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
--
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment