Skip to content

Instantly share code, notes, and snippets.

@abraithwaite

abraithwaite/dmesg.txt

Created March 22, 2015 03:40
Show Gist options
  • Save abraithwaite/d0da51e7ff7a1d83b741 to your computer and use it in GitHub Desktop.
Save abraithwaite/d0da51e7ff7a1d83b741 to your computer and use it in GitHub Desktop.
Download ZIP
novena dmesg
Raw
dmesg.txt
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.0-rc5-00238-gfb115dd (xobs@xobs-novena-laptop) (gcc version 4.9.1 (Debian 4.9.1-19) ) #350 SMP PREEMPT Fri Dec 12 18:08:43 SGT 2014
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Kosagi Novena Dual/Quad
[ 0.000000] Ignoring memory range 0xffffffff - 0x100000000
[ 0.000000] cma: Reserved 256 MiB at 2f800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 983039
[ 0.000000] free_area_init_node: node 0, pgdat c0ad8d00, node_mem_map dd978000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 6160 pages used for memmap
[ 0.000000] HighMem zone: 788479 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 9 pages/cpu @dd926000 s12736 r8192 d15936 u36864
[ 0.000000] pcpu-alloc: s12736 r8192 d15936 u36864 alloc=9*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 981519
[ 0.000000] Kernel command line: console=ttymxc1,115200 init=/lib/systemd/systemd rootwait rw root=PARTUUID=4e6f764d-03 console=tty0
[ 0.000000] log_buf_len individual max cpu contribution: 65536 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 196608 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 524288 bytes
[ 0.000000] early log buf free: 129264(98%)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 7864312 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 3617932K/3932156K available (7928K kernel code, 365K rwdata, 2300K rodata, 524K init, 338K bss, 314224K reserved, 3153916K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0a05394 (10229 kB)
.init : 0xc0a06000 - 0xc0a891c0 ( 525 kB)
.data : 0xc0a8a000 - 0xc0ae54ec ( 366 kB)
.bss : 0xc0ae54ec - 0xc0b39e64 ( 339 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001
[ 0.000000] Switching to timer-based delay loop, resolution 15ns
[ 0.000008] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 65075262448ns
[ 0.001490] Console: colour dummy device 80x30
[ 0.002638] console [tty0] enabled
[ 0.002672] Calibrating delay loop (skipped), value calculated using timer frequency.. 132.00 BogoMIPS (lpj=660000)
[ 0.002728] pid_max: default: 32768 minimum: 301
[ 0.002882] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002920] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003628] Initializing cgroup subsys memory
[ 0.003677] Initializing cgroup subsys devices
[ 0.003711] Initializing cgroup subsys freezer
[ 0.003743] Initializing cgroup subsys blkio
[ 0.003773] Initializing cgroup subsys perf_event
[ 0.003841] CPU: Testing write buffer coherency: ok
[ 0.003892] ftrace: allocating 25965 entries in 77 pages
[ 0.048106] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.048247] Setting up static identity map for 0x1072d958 - 0x1072d9b0
[ 0.120483] CPU1: Booted secondary processor
[ 0.120517] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.140476] CPU2: Booted secondary processor
[ 0.140502] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.160493] CPU3: Booted secondary processor
[ 0.160518] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.160606] Brought up 4 CPUs
[ 0.160708] SMP: Total of 4 processors activated.
[ 0.160727] CPU: All CPU(s) started in SVC mode.
[ 0.161458] devtmpfs: initialized
[ 0.165132] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.179207] pinctrl core: initialized pinctrl subsystem
[ 0.179634] regulator-dummy: no parameters
[ 0.189436] NET: Registered protocol family 16
[ 0.191927] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.193018] cpuidle: using governor ladder
[ 0.193051] cpuidle: using governor menu
[ 0.193198] CPU identified as i.MX6Q, silicon rev 1.2
[ 0.201361] vdd1p1: 800 <--> 1375 mV at 1100 mV
[ 0.201805] vdd3p0: 2800 <--> 3150 mV at 3000 mV
[ 0.202248] vdd2p5: 2000 <--> 2750 mV at 2400 mV
[ 0.202686] vddarm: 725 <--> 1450 mV at 1150 mV
[ 0.203134] vddpu: 725 <--> 1450 mV at 1150 mV
[ 0.203577] vddsoc: 725 <--> 1450 mV at 1175 mV
[ 0.213222] No ATAGs?
[ 0.213272] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.213306] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.213897] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.251726] 2P5V: 2500 mV
[ 0.251818] reg-fixed-voltage regulators:2p5v: 2P5V supplying 2500000uV
[ 0.252010] 3P3V: 3300 mV
[ 0.252084] reg-fixed-voltage regulators:3p3v: 3P3V supplying 3300000uV
[ 0.252275] usb_otg_vbus: 5000 mV
[ 0.252349] reg-fixed-voltage regulators:usb_otg_vbus: usb_otg_vbus supplying 5000000uV
[ 0.660521] es8328-power: 5000 mV
[ 0.660618] reg-fixed-voltage regulators:es8328-regulator: es8328-power supplying 5000000uV
[ 0.660820] lcd-lvds-power: 3300 mV
[ 0.660898] reg-fixed-voltage regulators:lcd-regulator: lcd-lvds-power supplying 3300000uV
[ 0.661104] lcd-display-power: 3300 mV
[ 0.661203] reg-fixed-voltage regulators:display-regulator: lcd-display-power supplying 3300000uV
[ 0.680519] sata-power: 3300 mV
[ 0.680601] reg-fixed-voltage regulators:sata-regulator: sata-power supplying 3300000uV
[ 0.681085] vgaarb: loaded
[ 0.681462] SCSI subsystem initialized
[ 0.681547] libata version 3.00 loaded.
[ 0.681848] usbcore: registered new interface driver usbfs
[ 0.681943] usbcore: registered new interface driver hub
[ 0.682094] usbcore: registered new device driver usb
[ 0.683955] stmpe-i2c 0-0044: Looking up vcc-supply from device tree
[ 0.684047] stmpe-i2c 0-0044: Looking up vio-supply from device tree
[ 0.684945] stmpe-i2c 0-0044: stmpe811 detected, chip id: 0x811
[ 0.687717] i2c i2c-0: IMX I2C adapter registered
[ 0.688396] i2c i2c-1: IMX I2C adapter registered
[ 0.689695] i2c i2c-2: IMX I2C adapter registered
[ 0.689879] pps_core: LinuxPPS API ver. 1 registered
[ 0.689901] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.689955] PTP clock support registered
[ 0.690369] Advanced Linux Sound Architecture Driver Initialized.
[ 0.691511] Bluetooth: Core ver 2.19
[ 0.691572] NET: Registered protocol family 31
[ 0.691591] Bluetooth: HCI device and connection manager initialized
[ 0.691626] Bluetooth: HCI socket layer initialized
[ 0.691652] Bluetooth: L2CAP socket layer initialized
[ 0.691699] Bluetooth: SCO socket layer initialized
[ 0.692267] cfg80211: Calling CRDA to update world regulatory domain
[ 0.692617] Switched to clocksource mxc_timer1
[ 0.724489] FS-Cache: Loaded
[ 0.724909] imx6q-pcie 1ffc000.pcie: missing *config* reg space
[ 0.846229] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
[ 0.846266] pci_bus 0000:00: root bus resource [io 0x1000-0x10000]
[ 0.846292] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
[ 0.846320] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.846381] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
[ 0.846415] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 0.846437] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 0.846501] pci 0000:00:00.0: supports D1
[ 0.846513] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.846822] PCI: bus0: Fast back to back transfers disabled
[ 0.847087] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
[ 0.847201] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff 64bit]
[ 0.847377] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.847614] pci 0000:01:00.0: supports D1
[ 0.847627] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.862725] PCI: bus1: Fast back to back transfers disabled
[ 0.862760] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.862779] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.862900] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
[ 0.862937] pci 0000:00:00.0: BAR 14: assigned [mem 0x01100000-0x011fffff]
[ 0.862966] pci 0000:00:00.0: BAR 15: assigned [mem 0x01200000-0x012fffff pref]
[ 0.862997] pci 0000:00:00.0: BAR 6: assigned [mem 0x01300000-0x0130ffff pref]
[ 0.863031] pci 0000:01:00.0: BAR 0: assigned [mem 0x01100000-0x0117ffff 64bit]
[ 0.863111] pci 0000:01:00.0: BAR 6: assigned [mem 0x01200000-0x0120ffff pref]
[ 0.863142] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.863169] pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff]
[ 0.863196] pci 0000:00:00.0: bridge window [mem 0x01200000-0x012fffff pref]
[ 0.863247] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.863274] pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff]
[ 0.863300] pci 0000:00:00.0: bridge window [mem 0x01200000-0x012fffff pref]
[ 0.863333] pci_bus 0000:00: resource 4 [io 0x1000-0x10000]
[ 0.863344] pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff]
[ 0.863356] pci_bus 0000:01: resource 1 [mem 0x01100000-0x011fffff]
[ 0.863367] pci_bus 0000:01: resource 2 [mem 0x01200000-0x012fffff pref]
[ 0.876512] NET: Registered protocol family 2
[ 0.877266] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.877370] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.877513] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.877603] TCP: reno registered
[ 0.877631] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.877700] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.877961] NET: Registered protocol family 1
[ 0.878056] PCI: CLS 64 bytes, default 64
[ 0.878639] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.881905] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.882122] audit: initializing netlink subsys (disabled)
[ 0.882187] audit: type=2000 audit(0.859:1): initialized
[ 0.891302] zpool: loaded
[ 0.891339] zbud: loaded
[ 0.893460] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.894910] fuse init (API version 7.23)
[ 0.896478] pstore: Registered eepromoops as persistent store backend
[ 0.896576] msgmni has been set to 1418
[ 0.898344] NET: Registered protocol family 38
[ 0.898476] bounce: pool size: 64 pages
[ 0.898718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.898763] io scheduler noop registered (default)
[ 0.898794] io scheduler deadline registered
[ 0.899016] io scheduler cfq registered
[ 0.901088] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 0.901124] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.901155] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
[ 0.901605] pwm-backlight backlight: Looking up power-supply from device tree
[ 0.902963] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[ 0.903008] imx-sdma 20ec000.sdma: firmware not found
[ 0.906209] imx-sdma 20ec000.sdma: initialized
[ 0.908051] pfuze100-regulator 1-0008: Full layer: 2, Metal layer: 1
[ 0.908672] pfuze100-regulator 1-0008: FAB: 0, FIN: 0
[ 0.908697] pfuze100-regulator 1-0008: identify took 1 tries
[ 0.908720] pfuze100-regulator 1-0008: pfuze100 found.
[ 0.910262] SW1AB: 300 <--> 1875 mV at 1375 mV
[ 0.911085] SW1C: 300 <--> 1875 mV at 1375 mV
[ 0.911928] SW2: 800 <--> 3300 mV at 3000 mV
[ 0.912792] SW3A: 400 <--> 1975 mV at 1500 mV
[ 0.913619] SW3B: 400 <--> 1975 mV at 1500 mV
[ 0.914429] SW4: override max_uV, 3300000 -> 1975000
[ 0.914445] SW4: 800 <--> 1975 mV at 1800 mV
[ 0.915686] SWBST: 5000 <--> 5150 mV at 5000 mV
[ 0.916927] VSNVS: 1000 <--> 3000 mV at 3000 mV
[ 0.917163] VREFDDR: override min_uV, 1 -> 750000
[ 0.917176] VREFDDR: override max_uV, 2147483647 -> 750000
[ 0.917781] VREFDDR: 750 mV
[ 0.918571] VGEN1: 800 <--> 1550 mV at 800 mV
[ 0.919377] VGEN2: 800 <--> 1550 mV at 1500 mV
[ 0.920175] VGEN3: 1800 <--> 3300 mV at 1800 mV
[ 0.920976] VGEN4: 1800 <--> 3300 mV at 1800 mV
[ 0.921815] VGEN5: 1800 <--> 3300 mV at 2500 mV
[ 0.922646] VGEN6: 1800 <--> 3300 mV at 2800 mV
[ 0.999142] Serial: IMX driver
[ 0.999734] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX
[ 2.025661] console [ttymxc1] enabled
[ 2.029878] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX
[ 2.039110] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61, base_baud = 5000000) is a IMX
[ 2.048255] [drm] Initialized drm 1.1.0 20060810
[ 2.053073] it6251 2-005c: Looking up power-supply from device tree
[ 2.315564] dummy 2-005e: error -5 writing to lvds addr 0x5
[ 2.565043] Galcore version 4.6.9.9754
[ 2.568833] galcore 130000.gpu: Looking up pu-supply from device tree
[ 2.595825] ipu_smfc_init: ioremap 0x02650000 -> f00ce000
[ 2.596375] imx-ipuv3 2400000.ipu: IPUv3H probed
[ 2.601345] ipu_smfc_init: ioremap 0x02a50000 -> f011e000
[ 2.601854] imx-ipuv3 2800000.ipu: IPUv3H probed
[ 2.614307] brd: module loaded
[ 2.621350] loop: module loaded
[ 2.627536] senoko 0-0020: Senoko 'S' version 2.0 (features: 0x02)
[ 2.633781] senoko 0-0020: GPIO IRQ: 20
[ 2.637641] senoko 0-0020: GPIO IRQ trigger: 0
[ 2.643311] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1025, using 00000024
[ 2.651008] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000
[ 2.658545] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 8, using 00002800
[ 2.666249] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
[ 2.673968] ahci-imx 2200000.sata: Looking up target-supply from device tree
[ 2.676867] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 2.681550] it6251 2-005c: RPCLKCnt: 1025
[ 2.682257] it6251 2-005c: System status: 0x3a
[ 2.683685] it6251 2-005c: Clock: 0x193
[ 2.684395] it6251 2-005c: Ref Link State: 0x00
[ 2.684403] it6251 2-005c: Display didn't stabilize. This may be because the LVDS port is still in powersave mode.
[ 2.684410] it6251 2-005c: Will try again in 100 msecs
[ 2.716428] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.725267] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[ 2.735869] scsi host0: ahci_platform
[ 2.739949] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
[ 2.749745] spi_imx 2010000.ecspi: probed
[ 2.755195] libphy: Fixed MDIO Bus: probed
[ 2.760528] fec 2188000.ethernet: Looking up phy-supply from device tree
[ 2.760547] fec 2188000.ethernet: Looking up phy-supply property in node /soc/aips-bus@02100000/ethernet@02188000 failed
[ 2.760570] 2188000.ethernet supply phy not found, using dummy regulator
[ 2.785613] dummy 2-005e: error -5 writing to lvds addr 0x5
[ 2.793657] libphy: fec_enet_mii_bus: probed
[ 2.798544] fec 2188000.ethernet eth0: registered PHC device 0
[ 2.804733] ath9k 0000:01:00.0: enabling device (0140 -> 0142)
[ 2.820531] ath: EEPROM regdomain: 0x60
[ 2.820541] ath: EEPROM indicates we should expect a direct regpair map
[ 2.820556] ath: Country alpha2 being used: 00
[ 2.820562] ath: Regpair used: 0x60
[ 2.832071] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.833622] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xf0300000, irq=155
[ 2.840477] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 2.847990] usbcore: registered new interface driver pegasus
[ 2.853801] usbcore: registered new interface driver asix
[ 2.859284] usbcore: registered new interface driver ax88179_178a
[ 2.865480] usbcore: registered new interface driver cdc_ether
[ 2.871391] usbcore: registered new interface driver cdc_eem
[ 2.877179] usbcore: registered new interface driver smsc75xx
[ 2.883045] usbcore: registered new interface driver smsc95xx
[ 2.888870] usbcore: registered new interface driver net1080
[ 2.894627] usbcore: registered new interface driver cdc_subset
[ 2.900677] usbcore: registered new interface driver cdc_ncm
[ 2.906434] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.913014] ehci-pci: EHCI PCI platform driver
[ 2.917548] ehci-platform: EHCI generic platform driver
[ 2.923219] usbcore: registered new interface driver usb-storage
[ 2.929404] usbcore: registered new interface driver usbserial
[ 2.935329] usbcore: registered new interface driver usbserial_generic
[ 2.941925] usbserial: USB Serial support registered for generic
[ 2.948033] usbcore: registered new interface driver usb_serial_simple
[ 2.954644] usbserial: USB Serial support registered for zio
[ 2.960364] usbserial: USB Serial support registered for funsoft
[ 2.966447] usbserial: USB Serial support registered for flashloader
[ 2.972882] usbserial: USB Serial support registered for vivopay
[ 2.978951] usbserial: USB Serial support registered for moto_modem
[ 2.985297] usbserial: USB Serial support registered for hp4x
[ 2.991104] usbserial: USB Serial support registered for suunto
[ 2.997102] usbserial: USB Serial support registered for siemens_mpi
[ 3.004886] imx_usb 2184000.usb: Looking up vbus-supply from device tree
[ 3.005188] ci_hdrc ci_hdrc.0: ChipIdea HDRC found, lpm: 0; cap: f012e100 op: f012e140
[ 3.008172] ci_hdrc ci_hdrc.0: It is OTG capable controller
[ 3.009117] imx_usb 2184200.usb: Looking up vbus-supply from device tree
[ 3.009397] ci_hdrc ci_hdrc.1: ChipIdea HDRC found, lpm: 0; cap: f0136300 op: f0136340
[ 3.012911] ci_hdrc ci_hdrc.1: doesn't support gadget
[ 3.018003] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 3.022951] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[ 3.042657] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 3.048291] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.055135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.062388] usb usb1: Product: EHCI Host Controller
[ 3.067302] usb usb1: Manufacturer: Linux 3.17.0-rc5-00238-gfb115dd ehci_hcd
[ 3.074389] usb usb1: SerialNumber: ci_hdrc.1
[ 3.079553] hub 1-0:1.0: USB hub found
[ 3.083389] hub 1-0:1.0: 1 port detected
[ 3.088269] mousedev: PS/2 mouse device common for all mice
[ 3.094461] input: 20b8000.kpp as /devices/soc0/soc/2000000.aips-bus/20b8000.kpp/input/input0
[ 3.102657] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.102704] ahci-imx 2200000.sata: no device found, disabling link.
[ 3.102710] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
[ 3.123357] input: Senoko keypad as /devices/soc0/soc/2100000.aips-bus/21a0000.i2c/i2c-0/0-0020/senoko-keypad.1/input/input1
[ 3.135047] usbcore: registered new interface driver appletouch
[ 3.141094] usbcore: registered new interface driver bcm5974
[ 3.150236] it6251 2-005c: RPCLKCnt: 1025
[ 3.155039] it6251 2-005c: System status: 0x3a
[ 3.155141] rtc-pcf8523 0-0068: rtc core: registered rtc-pcf8523 as rtc0
[ 3.155735] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc1
[ 3.155868] i2c /dev entries driver
[ 3.179580] it6251 2-005c: Clock: 0x193
[ 3.184187] it6251 2-005c: Ref Link State: 0x00
[ 3.188758] it6251 2-005c: Display didn't stabilize. This may be because the LVDS port is still in powersave mode.
[ 3.199260] it6251 2-005c: Will try again in 150 msecs
[ 3.212434] sbs-battery 0-000b: sbs_probe: Failed to get device status
[ 3.219027] sbs-battery: probe of 0-000b failed with error -5
[ 3.226982] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[ 3.233105] usbcore: registered new interface driver bcm203x
[ 3.238868] usbcore: registered new interface driver btusb
[ 3.244496] usbcore: registered new interface driver ath3k
[ 3.250190] sdhci: Secure Digital Host Controller Interface driver
[ 3.256416] sdhci: Copyright(c) Pierre Ossman
[ 3.260801] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.267305] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode
[ 3.277754] sdhci-esdhc-imx 2194000.usdhc: Looking up vmmc-supply from device tree
[ 3.277774] sdhci-esdhc-imx 2194000.usdhc: Looking up vmmc-supply property in node /soc/aips-bus@02100000/usdhc@02194000 failed
[ 3.277803] sdhci-esdhc-imx 2194000.usdhc: Looking up vqmmc-supply from device tree
[ 3.277818] sdhci-esdhc-imx 2194000.usdhc: Looking up vqmmc-supply property in node /soc/aips-bus@02100000/usdhc@02194000 failed
[ 3.277832] sdhci-esdhc-imx 2194000.usdhc: No vmmc regulator found
[ 3.284080] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
[ 3.291640] sdhci-esdhc-imx 2194000.usdhc: Looking up card-external-vcc-supply from device tree
[ 3.291659] sdhci-esdhc-imx 2194000.usdhc: Looking up card-external-vcc-supply property in node /soc/aips-bus@02100000/usdhc@02194000 failed
[ 3.291674] 2194000.usdhc supply card-external-vcc not found, using dummy regulator
[ 3.355603] dummy 2-005e: error -5 writing to lvds addr 0x5
[ 3.392657] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[ 3.400301] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
[ 3.402712] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 3.416133] sdhci-esdhc-imx 2198000.usdhc: Looking up vmmc-supply from device tree
[ 3.416153] sdhci-esdhc-imx 2198000.usdhc: Looking up vmmc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 failed
[ 3.416176] sdhci-esdhc-imx 2198000.usdhc: Looking up vqmmc-supply from device tree
[ 3.416190] sdhci-esdhc-imx 2198000.usdhc: Looking up vqmmc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 failed
[ 3.416204] sdhci-esdhc-imx 2198000.usdhc: No vmmc regulator found
[ 3.422411] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
[ 3.429002] sdhci-esdhc-imx 2198000.usdhc: Looking up card-external-vcc-supply from device tree
[ 3.429025] sdhci-esdhc-imx 2198000.usdhc: Looking up card-external-vcc-supply property in node /soc/aips-bus@02100000/usdhc@02198000 failed
[ 3.429040] 2198000.usdhc supply card-external-vcc not found, using dummy regulator
[ 3.532660] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
[ 3.540651] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.546840] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.552538] usbcore: registered new interface driver usbhid
[ 3.558156] usbhid: USB HID core driver
[ 3.558751] usb 1-1: New USB device found, idVendor=05e3, idProduct=0614
[ 3.558761] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.558768] usb 1-1: Product: USB2.0 Hub Charger
[ 3.561365] hub 1-1:1.0: USB hub found
[ 3.561788] hub 1-1:1.0: 4 ports detected
[ 3.590222] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.591687] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 3.599333] mmc1: new high speed SDHC card at address e624
[ 3.599757] mmcblk0: mmc1:e624 SS16G 14.8 GiB
[ 3.601177] mmcblk0: p1 p2 p3
[ 3.618070] [drm] No driver support for vblank timestamp query.
[ 3.624145] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops)
[ 3.631657] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops)
[ 3.639194] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops)
[ 3.646732] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops)
[ 3.654421] imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[ 3.662053] imx-drm display-subsystem: bound 120000.hdmi (ops hdmi_ops)
[ 3.668946] imx-ldb 2000000.aips-bus:ldb@020e0008: dual-channel mode, ignoring second output
[ 3.677459] imx-drm display-subsystem: bound 2000000.aips-bus:ldb@020e0008 (ops imx_ldb_ops)
[ 3.723459] Console: switching to colour frame buffer device 240x67
[ 3.729024] it6251 2-005c: RPCLKCnt: 1025
[ 3.729732] it6251 2-005c: System status: 0x3a
[ 3.731135] it6251 2-005c: Clock: 0x193
[ 3.731844] it6251 2-005c: Ref Link State: 0x00
[ 3.731851] it6251 2-005c: Display didn't stabilize. This may be because the LVDS port is still in powersave mode.
[ 3.731857] it6251 2-005c: Will try again in 200 msecs
[ 3.776073] imx-drm display-subsystem: fb0: frame buffer device
[ 3.782174] imx-drm display-subsystem: registered panic notifier
[ 3.812655] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0
[ 3.821595] es8328 2-0011: Looking up DVDD-supply from device tree
[ 3.821686] es8328 2-0011: Looking up AVDD-supply from device tree
[ 3.821749] es8328 2-0011: Looking up PVDD-supply from device tree
[ 3.821824] es8328 2-0011: Looking up HPVDD-supply from device tree
[ 3.823212] imx-es8328 sound: Looking up audio-amp-supply from device tree
[ 3.830764] imx-es8328 sound: es8328-hifi-analog <-> 2028000.ssi mapping ok
[ 3.843043] usb 1-1.1: new full-speed USB device number 3 using ci_hdrc
[ 3.925571] dummy 2-005e: error -5 writing to lvds addr 0x5
[ 3.955794] usb 1-1.1: New USB device found, idVendor=04fe, idProduct=0008
[ 3.956227] input: imx-audio-es8328 Headphone Jack as /devices/soc0/sound/sound/card1/input2
[ 3.956817] TCP: cubic registered
[ 3.956849] NET: Registered protocol family 17
[ 3.957027] Bluetooth: RFCOMM socket layer initialized
[ 3.957045] Bluetooth: RFCOMM ver 1.11
[ 3.957067] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.957078] Bluetooth: BNEP socket layer initialized
[ 3.957089] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.957098] Bluetooth: HIDP socket layer initialized
[ 3.963640] cpu cpu0: Looking up arm-supply from device tree
[ 3.963706] cpu cpu0: Looking up pu-supply from device tree
[ 3.963756] cpu cpu0: Looking up soc-supply from device tree
[ 3.974818] ThumbEE CPU extension supported.
[ 3.974838] Registering SWP/SWPB emulation handler
[ 3.975282] registered taskstats version 1
[ 3.976252] input: gpio-keys as /devices/soc0/gpio-keys/input/input3
[ 3.979286] rtc-pcf8523 0-0068: setting system clock to 2015-03-21 22:30:01 UTC (1426977001)
[ 3.985546] PM: Checking hibernation image partition /dev/sda2
[ 3.985612] PM: Hibernation image not present or could not be loaded.
[ 3.985634] VGEN2: disabling
[ 3.986103] SW4: disabling
[ 3.986112] sata-power: disabling
[ 3.986120] usb_otg_vbus: disabling
[ 3.986287] ALSA device list:
[ 3.986292] #0: DW-HDMI rev 0x0a, irq 147
[ 3.986294] #1: imx-audio-es8328
[ 4.018624] it6251 2-005c: RPCLKCnt: 1025
[ 4.019297] it6251 2-005c: System status: 0x3e
[ 4.020631] it6251 2-005c: Clock: 0x193
[ 4.021300] it6251 2-005c: Ref Link State: 0x00
[ 4.095226] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.095233] usb 1-1.1: Product: Generic USB Hub
[ 4.095237] usb 1-1.1: Manufacturer: Chicony
[ 4.105449] hub 1-1.1:1.0: USB hub found
[ 4.112388] hub 1-1.1:1.0: 3 ports detected
[ 4.144785] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[ 4.155998] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
[ 4.181874] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.193840] VFS: Mounted root (ext4 filesystem) on device 179:3.
[ 4.204267] devtmpfs: mounted
[ 4.211338] Freeing unused kernel memory: 524K (c0a06000 - c0a89000)
[ 4.213064] usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
[ 4.324547] usb 1-1.2: New USB device found, idVendor=0b95, idProduct=772b
[ 4.335418] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.346763] usb 1-1.2: Product: AX88772B
[ 4.354185] usb 1-1.2: Manufacturer: ASIX Elec. Corp.
[ 4.363002] usb 1-1.2: SerialNumber: 000001
[ 4.515768] random: systemd urandom read with 84 bits of entropy available
[ 4.528872] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 4.546300] systemd[1]: Detected architecture 'arm'.
[ 4.670453] NET: Registered protocol family 10
[ 4.679937] systemd[1]: Inserted module 'ipv6'
[ 4.697407] systemd[1]: Set hostname to <novena-salsa-vision>.
[ 4.709091] asix 1-1.2:1.0 eth1: register 'asix' at usb-ci_hdrc.1-1.2, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:87:72:01
[ 4.803107] usb 1-1.3: new full-speed USB device number 5 using ci_hdrc
[ 4.925163] usb 1-1.3: string descriptor 0 read error: -22
[ 4.934594] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3393
[ 4.945432] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.958869] usb 1-1.3: Direct firmware load for ar3k/AthrBT_0x11020000.dfu failed with error -2
[ 4.971950] Bluetooth: Patch file not found ar3k/AthrBT_0x11020000.dfu
[ 4.982486] Bluetooth: Loading patch file failed
[ 4.991186] ath3k: probe of 1-1.3:1.0 failed with error -2
[ 5.083045] usb 1-1.4: new high-speed USB device number 6 using ci_hdrc
[ 5.204733] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0614
[ 5.218999] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.233524] usb 1-1.4: Product: USB2.0 Hub Charger
[ 5.247365] hub 1-1.4:1.0: USB hub found
[ 5.258553] hub 1-1.4:1.0: 4 ports detected
[ 5.342927] usb 1-1.1.1: new full-speed USB device number 7 using ci_hdrc
[ 5.433732] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.445453] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.456877] systemd[1]: Expecting device dev-ttymxc1.device...
[ 5.466680] usb 1-1.1.1: New USB device found, idVendor=04fe, idProduct=0006
[ 5.466689] usb 1-1.1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 5.466695] usb 1-1.1.1: Product: PFU-65 USB Keyboard
[ 5.466701] usb 1-1.1.1: Manufacturer: Chicony
[ 5.493760] input: Chicony PFU-65 USB Keyboard as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:04FE:0006.0001/input/input4
[ 5.494191] hid-generic 0003:04FE:0006.0001: input,hidraw0: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-ci_hdrc.1-1.1.1/input0
[ 5.543584] systemd[1]: Starting Remote File Systems (Pre).
[ 5.555983] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.565444] systemd[1]: Starting Encrypted Volumes.
[ 5.573040] usb 1-1.4.1: new low-speed USB device number 8 using ci_hdrc
[ 5.587273] systemd[1]: Reached target Encrypted Volumes.
[ 5.596101] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.612494] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.630404] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.641625] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.652468] systemd[1]: Starting Paths.
[ 5.662530] systemd[1]: Reached target Paths.
[ 5.669829] systemd[1]: Expecting device dev-disk-by\x2dpath-platform\x2d2198000.usdhc\x2dpart2.device...
[ 5.685822] systemd[1]: Expecting device dev-disk-by\x2dpath-platform\x2d2198000.usdhc\x2dpart1.device...
[ 5.701949] systemd[1]: Starting Root Slice.
[ 5.706531] usb 1-1.4.1: New USB device found, idVendor=0461, idProduct=4d22
[ 5.706537] usb 1-1.4.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.706541] usb 1-1.4.1: Product: USB Optical Mouse
[ 5.709903] input: USB Optical Mouse as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/0003:0461:4D22.0002/input/input5
[ 5.710338] hid-generic 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-ci_hdrc.1-1.4.1/input0
[ 5.804185] systemd[1]: Created slice Root Slice.
[ 5.812100] systemd[1]: Starting User and Session Slice.
[ 5.825134] systemd[1]: Created slice User and Session Slice.
[ 5.834012] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.847428] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.857585] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.869821] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.878729] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.891028] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.900107] systemd[1]: Starting Syslog Socket.
[ 5.911294] systemd[1]: Listening on Syslog Socket.
[ 5.919280] systemd[1]: Starting udev Control Socket.
[ 5.930971] systemd[1]: Listening on udev Control Socket.
[ 5.939453] systemd[1]: Starting udev Kernel Socket.
[ 5.950995] systemd[1]: Listening on udev Kernel Socket.
[ 5.959425] systemd[1]: Starting Journal Socket.
[ 5.970618] systemd[1]: Listening on Journal Socket.
[ 5.978739] systemd[1]: Starting System Slice.
[ 5.990166] systemd[1]: Created slice System Slice.
[ 5.998140] systemd[1]: Started File System Check on Root Device.
[ 6.007261] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 6.020045] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.029365] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 6.042174] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 6.051370] systemd[1]: Starting system-getty.slice.
[ 6.062951] systemd[1]: Created slice system-getty.slice.
[ 6.071197] systemd[1]: Starting Nameserver information manager...
[ 6.098358] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.135602] systemd[1]: Starting Load Kernel Modules...
[ 6.149593] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.168381] systemd[1]: Mounting Debug File System...
[ 6.182777] systemd[1]: Mounted Huge Pages File System.
[ 6.191698] systemd[1]: Starting udev Coldplug all Devices...
[ 6.206370] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.217140] systemd[1]: Starting LSB: Set keymap...
[ 6.231822] systemd[1]: Starting Journal Service...
[ 6.253382] systemd[1]: Started Journal Service.
[ 6.269504] random: nonblocking pool is initialized
[ 6.538362] systemd-udevd[174]: starting version 215
[ 6.997200] EXT4-fs (mmcblk0p3): re-mounted. Opts: barrier=1,errors=remount-ro
[ 7.368336] Adding 32764k swap on /dev/mmcblk0p2. Priority:-1 extents:1 across:32764k SSFS
[ 7.974582] systemd-journald[144]: Received request to flush runtime journal from PID 1
[ 13.413119] vgaarb: this pci device is not a vga device
[ 13.523499] vgaarb: this pci device is not a vga device
[ 13.923219] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet:07, irq=-1)
[ 13.936001] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.007551] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.106672] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 16.307764] cfg80211: Calling CRDA to update world regulatory domain
[ 16.446817] cfg80211: World regulatory domain updated:
[ 16.451993] cfg80211: DFS Master region: unset
[ 16.456490] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.466360] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.474532] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.482731] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.490800] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 16.500445] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 16.510099] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 16.518318] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.526449] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 18.971419] wlan0: authenticate with c4:6e:1f:4f:ca:64
[ 18.988881] wlan0: direct probe to c4:6e:1f:4f:ca:64 (try 1/3)
[ 19.202116] wlan0: send auth to c4:6e:1f:4f:ca:64 (try 2/3)
[ 19.209230] wlan0: authenticated
[ 19.222126] wlan0: associate with c4:6e:1f:4f:ca:64 (try 1/3)
[ 19.229534] wlan0: RX AssocResp from c4:6e:1f:4f:ca:64 (capab=0x11 status=0 aid=4)
[ 19.237386] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 19.243820] wlan0: associated
[ 297.489311] vgaarb: this pci device is not a vga device
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment