BBB dmesg

gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13-bone28 (root@imx6q-wandboard-2gb-0) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Thu Sep 12 23:22:35 UTC 2013
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c09d2540, node_mem_map c0a4d000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 129792 pages, LIFO batch:31
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 9 pages/cpu @c0e5d000 s14080 r8192 d14592 u36864
[    0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
[    0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc ip=
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 1048576 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 511MB = 511MB total
[    0.000000] Memory: 504532k/504532k available, 19756k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0907ad0   (9215 kB)
[    0.000000]       .init : 0xc0908000 - 0xc0951700   ( 294 kB)
[    0.000000]       .data : 0xc0952000 - 0xc09d5500   ( 526 kB)
[    0.000000]        .bss : 0xc09d5500 - 0xc0a4c900   ( 477 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000378] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
[    0.017386] pid_max: default: 32768 minimum: 301
[    0.017631] Security Framework initialized
[    0.017732] Mount-cache hash table entries: 512
[    0.027822] Initializing cgroup subsys cpuacct
[    0.027863] Initializing cgroup subsys memory
[    0.027933] Initializing cgroup subsys blkio
[    0.028082] CPU: Testing write buffer coherency: ok
[    0.028675] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.028754] Setting up static identity map for 0x80634640 - 0x80634698
[    0.030429] Brought up 1 CPUs
[    0.030456] SMP: Total of 1 processors activated (363.67 BogoMIPS).
[    0.031825] devtmpfs: initialized
[    0.096183] pinctrl core: initialized pinctrl subsystem
[    0.096420] rstctl core: initialized rstctl subsystem
[    0.096919] regulator-dummy: no parameters
[    0.097554] NET: Registered protocol family 16
[    0.098452] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.108607] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.109449] platform 49000000.edma: alias fck already exists
[    0.109480] platform 49000000.edma: alias fck already exists
[    0.109504] platform 49000000.edma: alias fck already exists
[    0.110657] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.110831] OMAP GPIO hardware version 0.1
[    0.112347] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.113690] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.115068] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.115708] of_get_named_gpio_flags exited with status 52
[    0.115741] gpio-rctrl rstctl.4: loaded OK
[    0.121109] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.123259] cpsw.0: No hwaddr in dt. Using 90:59:af:57:fb:89 from efuse
[    0.123292] cpsw.1: No hwaddr in dt. Using 90:59:af:57:fb:8b from efuse
[    0.137382] bio: create slab <bio-0> at 0
[    0.149006] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149251] of_get_named_gpio_flags: can't parse gpios property
[    0.149477] vmmcsd_fixed: 3300 mV 
[    0.152347] SCSI subsystem initialized
[    0.152759] usbcore: registered new interface driver usbfs
[    0.152869] usbcore: registered new interface driver hub
[    0.153208] usbcore: registered new device driver usb
[    0.155358] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    0.156997] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0
[    1.156077] omap_i2c 44e0b000.i2c: controller timed out
[    1.156132] tps65217 0-0024: Failed to read INT reg
[    1.156150] tps65217 0-0024: Failed to probe pwr_but
[    2.156068] omap_i2c 44e0b000.i2c: controller timed out
[    3.159971] omap_i2c 44e0b000.i2c: controller timed out
[    3.164414] tps65217: probe of 0-0024 failed with error -110
[    3.165140] omap_i2c 44e0b000.i2c: unable to select pin group
[    3.165985] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[    3.168515] omap_i2c 4819c000.i2c: unable to select pin group
[    3.168748] media: Linux media interface: v0.10
[    3.168849] Linux video capture interface: v2.00
[    3.168971] pps_core: LinuxPPS API ver. 1 registered
[    3.168987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.169901] Advanced Linux Sound Architecture Driver Initialized.
[    3.170876] NetLabel: Initializing
[    3.170895] NetLabel:  domain hash size = 128
[    3.170907] NetLabel:  protocols = UNLABELED CIPSOv4
[    3.171029] NetLabel:  unlabeled traffic allowed by default
[    3.171376] Switching to clocksource gp_timer
[    3.227202] NET: Registered protocol family 2
[    3.228401] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    3.228544] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[    3.228691] TCP: Hash tables configured (established 4096 bind 4096)
[    3.228791] TCP: reno registered
[    3.228816] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    3.228859] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    3.229281] NET: Registered protocol family 1
[    3.229904] RPC: Registered named UNIX socket transport module.
[    3.229926] RPC: Registered udp transport module.
[    3.229939] RPC: Registered tcp transport module.
[    3.229952] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.230436] Trying to unpack rootfs image as initramfs...
[    3.540026] Freeing initrd memory: 2520K
[    3.540570] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    3.541075] CPU PMU: attempt to register multiple PMU devices!
[    3.541119] arm-pmu: probe of arm-pmu failed with error -28
[    3.541611] omap2_mbox_probe: platform not supported
[    3.808036] VFS: Disk quotas dquot_6.5.2
[    3.808417] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.809684] NFS: Registering the id_resolver key type
[    3.809796] Key type id_resolver registered
[    3.809814] Key type id_legacy registered
[    3.809885] fuse init (API version 7.20)
[    3.810906] Btrfs loaded
[    3.811108] msgmni has been set to 990
[    3.814195] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    3.814223] io scheduler noop registered
[    3.814237] io scheduler deadline registered
[    3.814290] io scheduler cfq registered (default)
[    3.817096] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.819659] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    3.820155] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    4.552036] console [ttyO0] enabled
[    4.557031] [drm] Initialized drm 1.1.0 20060810
[    4.575433] brd: module loaded
[    4.585731] loop: module loaded
[    4.589179] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    4.596471] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    4.603751] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    4.611023] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    4.618298] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    5.624964] omap_i2c 44e0b000.i2c: controller timed out
[    6.634421] omap_i2c 44e0b000.i2c: controller timed out
[    6.646111] bone-capemgr bone_capemgr.9: bone: scan failed (1 time)
[    8.154145] omap_i2c 44e0b000.i2c: controller timed out
[    9.165647] omap_i2c 44e0b000.i2c: controller timed out
[    9.177358] bone-capemgr bone_capemgr.9: bone: scan failed (2 time)
[   10.685368] omap_i2c 44e0b000.i2c: controller timed out
[   11.696942] omap_i2c 44e0b000.i2c: controller timed out
[   11.708607] bone-capemgr bone_capemgr.9: bone: scan failed (3 time)
[   13.216621] omap_i2c 44e0b000.i2c: controller timed out
[   14.228145] omap_i2c 44e0b000.i2c: controller timed out
[   14.239857] bone-capemgr bone_capemgr.9: bone: scan failed (4 time)
[   15.747810] omap_i2c 44e0b000.i2c: controller timed out
[   16.759446] omap_i2c 44e0b000.i2c: controller timed out
[   16.771109] bone-capemgr bone_capemgr.9: bone: scan failed (5 time)
[   18.279022] omap_i2c 44e0b000.i2c: controller timed out
[   19.290663] omap_i2c 44e0b000.i2c: controller timed out
[   19.302356] bone-capemgr bone_capemgr.9: bone: scan failed (6 time)
[   20.810192] omap_i2c 44e0b000.i2c: controller timed out
[   21.822012] omap_i2c 44e0b000.i2c: controller timed out
[   21.833607] bone-capemgr bone_capemgr.9: bone: scan failed (7 time)
[   23.341448] omap_i2c 44e0b000.i2c: controller timed out
[   24.349333] omap_i2c 44e0b000.i2c: controller timed out
[   24.360952] bone-capemgr bone_capemgr.9: bone: scan failed (8 time)
[   25.868789] omap_i2c 44e0b000.i2c: controller timed out
[   26.880531] omap_i2c 44e0b000.i2c: controller timed out
[   26.892201] bone-capemgr bone_capemgr.9: bone: scan failed (9 time)
[   28.400049] omap_i2c 44e0b000.i2c: controller timed out
[   29.411757] omap_i2c 44e0b000.i2c: controller timed out
[   29.423450] bone-capemgr bone_capemgr.9: bone: scan failed (10 time)
[   29.931273] bone-capemgr bone_capemgr.9: Failed to scan baseboard eeprom
[   29.938347] bone-capemgr: probe of bone_capemgr.9 failed with error -110
[   29.947481] OneNAND driver initializing
[   29.953059] usbcore: registered new interface driver cdc_ether
[   29.959301] usbcore: registered new interface driver rndis_host
[   29.965692] usbcore: registered new interface driver cdc_ncm
[   29.972502] usbcore: registered new interface driver cdc_acm
[   29.978468] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   29.986863] Initializing USB Mass Storage driver...
[   29.992098] usbcore: registered new interface driver usb-storage
[   29.998410] USB Mass Storage support registered.
[   30.003444] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[   30.010451] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[   30.015727] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[   30.024513] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[   30.024532] musb-hdrc: MHDRC RTL version 2.0 
[   30.024545] musb-hdrc: setup fifo_mode 4
[   30.024572] musb-hdrc: 28/31 max ep, 16384/16384 memory
[   30.024721] musb-hdrc musb-hdrc.0.auto: *** mode=3
[   30.029777] musb-hdrc musb-hdrc.0.auto: *** power=250
[   30.035800] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[   30.041065] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[   30.049848] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[   30.049867] musb-hdrc: MHDRC RTL version 2.0 
[   30.049880] musb-hdrc: setup fifo_mode 4
[   30.049900] musb-hdrc: 28/31 max ep, 16384/16384 memory
[   30.050042] musb-hdrc musb-hdrc.1.auto: *** mode=1
[   30.055098] musb-hdrc musb-hdrc.1.auto: *** power=250
[   30.060415] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[   30.066823] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[   30.075082] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[   30.075205] usb usb1: default language 0x0409
[   30.075263] usb usb1: udev 1, busnum 1, minor = 0
[   30.075286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   30.082433] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   30.090017] usb usb1: Product: MUSB HDRC host driver
[   30.095239] usb usb1: Manufacturer: Linux 3.8.13-bone28 musb-hcd
[   30.101549] usb usb1: SerialNumber: musb-hdrc.1.auto
[   30.107605] usb usb1: usb_probe_device
[   30.107633] usb usb1: configuration #1 chosen from 1 choice
[   30.107704] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[   30.107904] hub 1-0:1.0: usb_probe_interface
[   30.107925] hub 1-0:1.0: usb_probe_interface - got id
[   30.107955] hub 1-0:1.0: USB hub found
[   30.112007] hub 1-0:1.0: 1 port detected
[   30.116157] hub 1-0:1.0: standalone hub
[   30.116176] hub 1-0:1.0: individual port power switching
[   30.116192] hub 1-0:1.0: no over-current protection
[   30.116208] hub 1-0:1.0: Single TT
[   30.116228] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[   30.116246] hub 1-0:1.0: power on to power good time: 10ms
[   30.116291] hub 1-0:1.0: local power source is good
[   30.116402] hub 1-0:1.0: enabling power on all ports
[   30.117626] mousedev: PS/2 mouse device common for all mice
[   30.125815] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[   30.133352] 44e3e000.rtc: already running
[   30.137847] i2c /dev entries driver
[   30.143282] pps_ldisc: PPS line discipline registered
[   30.148771] Driver for 1-wire Dallas network protocol.
[   30.156115] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[   30.164095] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[   30.173080] cpuidle: using governor ladder
[   30.177444] cpuidle: using governor menu
[   30.182032] of_get_named_gpio_flags exited with status 6
[   30.182053] of_get_named_gpio_flags: can't parse gpios property
[   30.182067] of_get_named_gpio_flags: can't parse gpios property
[   30.182103] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed
[   30.189351] omap_hsmmc mmc.5: Failed to get rstctl; not using any
[   30.196205] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[   30.203436] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[   30.210805] mmc.5 supply vmmc_aux not found, using dummy regulator
[   30.217482] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[   30.217563] hub 1-0:1.0: hub_suspend
[   30.217608] usb usb1: bus auto-suspend, wakeup 1
[   30.218223] omap_hsmmc mmc.5: pins are not configured from the driver
[   30.252208] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[   30.263963] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[   30.271278] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[   30.280281] leds-gpio gpio-leds.8: pins are not configured from the driver
[   30.287540] of_get_named_gpio_flags exited with status 53
[   30.287563] of_get_named_gpio_flags exited with status 54
[   30.287583] of_get_named_gpio_flags exited with status 55
[   30.287602] of_get_named_gpio_flags exited with status 56
[   30.287625] of_get_named_gpio_flags exited with status 53
[   30.287918] of_get_named_gpio_flags exited with status 54
[   30.288137] of_get_named_gpio_flags exited with status 55
[   30.288310] of_get_named_gpio_flags exited with status 56
[   30.288913] ledtrig-cpu: registered to indicate activity on CPUs
[   30.295735] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[   30.302986] usb usb1: usb wakeup-resume
[   30.303038] usb usb1: usb auto-resume
[   30.303065] hub 1-0:1.0: hub_resume
[   30.303121] hub 1-0:1.0: port 1: status 0101 change 0001
[   30.303471] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[   30.312282] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[   30.318612] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[   30.325904] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[   30.334209] usbcore: registered new interface driver usbhid
[   30.340138] usbhid: USB HID core driver
[   30.345619] ashmem: initialized
[   30.349572] logger: created 256K log 'log_main'
[   30.354810] logger: created 256K log 'log_events'
[   30.360123] logger: created 256K log 'log_radio'
[   30.365307] logger: created 256K log 'log_system'
[   30.374033] TCP: cubic registered
[   30.377816] NET: Registered protocol family 10
[   30.383961] NET: Registered protocol family 17
[   30.388764] mmc0: host does not support reading read-only switch. assuming write-enable.
[   30.397644] Key type dns_resolver registered
[   30.402473] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[   30.410721] ThumbEE CPU extension supported.
[   30.415338] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[   30.415519] mmc0: new high speed SDHC card at address 0001
[   30.421321] Registering SWP/SWPB emulation handler
[   30.426568] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[   30.427584] mmcblk0: mmc0:0001 00000 14.6 GiB 
[   30.433327] registered taskstats version 1
[   30.439380]  mmcblk0: p1 p2
[   30.493792] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[   30.500225] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[   30.518020] libphy: 4a101000.mdio: probed
[   30.522349] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[   30.532098] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[   30.539348] Detected MACID = 90:59:af:57:fb:89
[   30.544214] cpsw 4a100000.ethernet: NAPI disabled
[   30.551477] omap_rtc 44e3e000.rtc: setting system clock to 2014-12-02 15:36:14 UTC (1417534574)
[   30.560712] cpu0 supply cpu0 not found, using dummy regulator
[   30.567212] cpufreq_cpu0: failed to scale voltage up: -22
[   30.572996] cpufreq_cpu0: failed to scale voltage up: -22
[   30.585866] ALSA device list:
[   30.589081]   No soundcards found.
[   30.594043] Freeing init memory: 292K
[   30.664730] usb 1-1: default language 0x0409
[   30.665385] usb 1-1: udev 2, busnum 1, minor = 1
[   30.665413] usb 1-1: New USB device found, idVendor=7392, idProduct=7811
[   30.672599] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   30.680185] usb 1-1: Product: 802.11n WLAN Adapter
[   30.685288] usb 1-1: Manufacturer: Realtek
[   30.689656] usb 1-1: SerialNumber: 00e04c000001
[   30.701574] usb 1-1: usb_probe_device
[   30.701615] usb 1-1: configuration #1 chosen from 1 choice
[   30.704820] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[   30.705998] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[   30.706069] hub 1-0:1.0: port 1 enable change, status 00000503
[   30.753646] udevd[91]: starting version 175
[   32.656918] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   34.335455] udevd[316]: starting version 175
[   35.918834] rtl8192cu driver version=v4.0.2_9000.20130911
[   35.924680] build time: Nov 16 2013 12:47:03
[   35.999862] rtl8192cu 1-1:1.0: usb_probe_interface
[   35.999903] rtl8192cu 1-1:1.0: usb_probe_interface - got id
[   35.999944] 
[   35.999944] usb_endpoint_descriptor(0):
[   36.005689] bLength=7
[   36.008134] bDescriptorType=5
[   36.011309] bEndpointAddress=81
[   36.014658] wMaxPacketSize=200
[   36.017912] bInterval=0
[   36.020525] RT_usb_endpoint_is_bulk_in = 1
[   36.024883] 
[   36.024883] usb_endpoint_descriptor(1):
[   36.030528] bLength=7
[   36.032988] bDescriptorType=5
[   36.036152] bEndpointAddress=2
[   36.039406] wMaxPacketSize=200
[   36.042662] bInterval=0
[   36.045276] RT_usb_endpoint_is_bulk_out = 2
[   36.049724] 
[   36.049724] usb_endpoint_descriptor(2):
[   36.055374] bLength=7
[   36.057803] bDescriptorType=5
[   36.060963] bEndpointAddress=3
[   36.064219] wMaxPacketSize=200
[   36.067475] bInterval=0
[   36.070084] RT_usb_endpoint_is_bulk_out = 3
[   36.074535] 
[   36.074535] usb_endpoint_descriptor(3):
[   36.080180] bLength=7
[   36.082609] bDescriptorType=5
[   36.085771] bEndpointAddress=84
[   36.089118] wMaxPacketSize=40
[   36.092281] bInterval=1
[   36.094893] RT_usb_endpoint_is_int_in = 4, Interval = 1
[   36.100442] nr_endpoint=4, in_num=2, out_num=2
[   36.100442] 
[   36.106731] USB_SPEED_HIGH
[   36.155361] CHIP TYPE: RTL8188C_8192C
[   36.177559] register rtw_netdev_ops to netdev_ops
[   36.210867] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
[   36.216812] RF_Type is 3!!
[   36.251673] EEPROM type is E-FUSE
[   36.255274] ====> ReadAdapterInfo8192C
[   36.281131] Boot from EFUSE, Autoload OK !
[   37.088486] EEPROMVID = 0x7392
[   37.091793] EEPROMPID = 0x7811
[   37.095056] EEPROMCustomerID : 0x00
[   37.098780] EEPROMSubCustomerID: 0x00
[   37.102680] RT_CustomerID: 0x00
[   37.106040] _ReadMACAddress MAC Address from EFUSE = 80:1f:02:c4:59:cb
[   37.112977] EEPROMRegulatory = 0x0
[   37.116604] _ReadBoardType(0)
[   37.119775] BT Coexistance = disable
[   37.123582] mlmepriv.ChannelPlan = 0x02
[   37.127675] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
[   37.136262] ### PS params=>  power_mgnt(1),usbss_enable(0) ###
[   37.142461] ### AntDivCfg(0)
[   37.145534] readAdapterInfo_8192CU(): REPLACEMENT = 1
[   37.150909] <==== ReadAdapterInfo8192C in 896 ms
[   37.157121] rtw_macaddr_cfg MAC Address  = 80:1f:02:c4:59:cb
[   37.163185] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[   37.174554] _rtw_drv_register_netdev, MAC Address (if1) = 80:1f:02:c4:59:cb
[   37.184060] usbcore: registered new interface driver rtl8192cu
[   38.525185] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   38.817023] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[   46.469203] net eth0: initializing cpsw version 1.12 (0)
[   46.477411] net eth0: phy found : id is : 0x7c0f1
[   46.482452] libphy: PHY 4a101000.mdio:01 not found
[   46.487561] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   46.500822] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  108.115687] +871x_drv - drv_open, bup=0
[  108.123017]  ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
[  108.129702] FirmwareDownload92C accquire FW from embedded image
[  108.136001] fw_ver=v88, fw_subver=2, sig=0x88c0
[  108.161945] fw download ok!
[  108.164945] Set RF Chip ID to RF_6052 and RF type to 1T1R.
[  108.460789] IQK:Start!!!
[  108.470325] Path A Rx IQK fail!!
[  108.476272] Path A IQK Success!!
[  108.485085] Path A IQK Success!!
[  108.491166] IQK: final_candidate is 0
[  108.495092] IQK: RegE94=105 RegE9C=d RegEA4=fe RegEAC=3fe RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
[  108.495092]  Path A IQ Calibration Success !
[  108.614777] pdmpriv->TxPowerTrackControl = 1
[  108.621469] rtl8192cu_hal_init in 501ms
[  108.631377] MAC Address = 80:1f:02:c4:59:cb
[  108.636542] -871x_drv - drv_open, bup=1
[  108.640816] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  108.647229] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[  108.652033] set_mode = IW_MODE_INFRA
[  108.656342] hw_var_set_opmode()-4234 mode = 2
[  108.663357] =>rtw_wx_set_essid
[  108.667233] ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9a, len=32
[  108.674595] Set SSID under fw_state=0x00000008
[  108.680045] <=rtw_wx_set_essid, ret 0
[  108.716824] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[  110.016688] survey done event(9) band:0 for wlan0
[  110.021766] rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
[  110.029899] try_to_join, but select scanning queue fail, to_roaming:0
[  110.046249] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
[  110.058474] set_mode = IW_MODE_INFRA
[  110.066747] hw_var_set_opmode()-4234 mode = 2
[  110.071528] 
[  110.071528]  wpa_ie(length:22):
[  110.076486] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04 
[  110.081780] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00 
[  110.087069] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00 
[  110.115155] SetHwReg8192CU, 5130, RCR= 700060ca 
[  110.124384] =>rtw_wx_set_essid
[  110.127764] ssid=achingNet 2.4GHz, len=16
[  110.136484] Set SSID under fw_state=0x00000008
[  110.141276] [by_bssid:0][assoc_ssid:achingNet 2.4GHz][to_roaming:0] new candidate: achingNet 2.4GHz(c8:bc:c8:fd:90:b1, ch1) rssi:-66
[  110.153904] rtw_select_and_join_from_scanned_queue: candidate: achingNet 2.4GHz(c8:bc:c8:fd:90:b1, ch:1)
[  110.163991] link to new AP
[  110.166975] <=rtw_wx_set_essid, ret 0
[  110.171274] Set BSSID under fw_state=0x00000088
[  110.210746] start_join_set_ch_bw: ch=1, bwmode=0, ch_offset=0
[  110.264251] link to new AP
[  110.271097] OnAuthClient
[  110.273806] network.SupportedRates[0]=82
[  110.277957] network.SupportedRates[1]=84
[  110.282106] network.SupportedRates[2]=8B
[  110.286253] network.SupportedRates[3]=96
[  110.290398] network.SupportedRates[4]=0C
[  110.294543] network.SupportedRates[5]=12
[  110.298728] network.SupportedRates[6]=18
[  110.302902] network.SupportedRates[7]=24
[  110.307071] network.SupportedRates[8]=30
[  110.311248] network.SupportedRates[9]=48
[  110.315420] network.SupportedRates[10]=60
[  110.319682] network.SupportedRates[11]=6C
[  110.323943] bssrate_len = 12
[  110.342018] OnAssocRsp
[  110.344613] report_join_res(1)
[  110.347852] rtw_joinbss_update_network
[  110.351844] rtw_joinbss_update_stainfo
[  110.356073] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
[  110.361208] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  110.369407] WMM(0): 0, a42b
[  110.378749] WMM(1): 0, a44f
[  110.382020] WMM(2): 0, 5e4322
[  110.386260] 
[  110.386260]  ~~~~stastakey:unicastkey
[  110.391931] WMM(3): 0, 2f3222
[  110.395133] HTOnAssocRsp
[  110.398116]  ~~~~set sta key:groupkey
[  110.402421] ==> rtw_set_key algorithm(4),keyid(2),key_mask(0)
[  110.410730] update raid entry, mask=0x40000fff, arg=0x80
[  110.418222] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
[  110.424343] SetFwRsvdPagePkt
[  110.427511] Set RSVD page location to Fw.
[  110.432469] =>mlmeext_joinbss_event_callback
[  110.439123] SetHwReg8192CU, 5126, RCR= 700060ce 
[  110.645530] rtl8192c_dm_RF_Saving(): RF_Save
[  114.658240] rtw_set_ps_mode(): Enter 802.11 power save mode...
[  114.665165] rtl8192c_dm_RF_Saving(): RF_Normal
[  114.670029] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[  117.861282] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[  117.870285] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[  118.678220] rtl8192c_dm_RF_Saving(): RF_Save
[  122.810274] omap_i2c 44e0b000.i2c: controller timed out
[  123.822037] omap_i2c 44e0b000.i2c: controller timed out
[  124.849353] omap_i2c 44e0b000.i2c: controller timed out
[  125.866891] omap_i2c 44e0b000.i2c: controller timed out
[  126.925543] omap_i2c 44e0b000.i2c: controller timed out
[  127.945132] omap_i2c 44e0b000.i2c: controller timed out
[  128.966588] omap_i2c 44e0b000.i2c: controller timed out
[  129.984151] omap_i2c 44e0b000.i2c: controller timed out
[  131.042703] omap_i2c 44e0b000.i2c: controller timed out
[  132.052968] omap_i2c 44e0b000.i2c: controller timed out
[  132.729439] rtw_set_ps_mode(): Enter 802.11 power save mode...
[  132.741923] rtl8192c_dm_RF_Saving(): RF_Normal
[  132.746723] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[  133.063217] omap_i2c 44e0b000.i2c: controller timed out
[  134.073549] omap_i2c 44e0b000.i2c: controller timed out
[  134.249209]  gadget: using random self ethernet address
[  134.269849] usb0: MAC ea:d8:32:05:6a:81
[  134.274044] usb0: HOST MAC 90:59:af:57:fb:8b
[  134.286585]  gadget: Mass Storage Function, version: 2009/09/11
[  134.292977]  gadget: Number of LUNs=1
[  134.308944]  lun0: LUN: removable file: /dev/mmcblk0p1
[  134.330674]  gadget: Multifunction Composite Gadget
[  134.349913]  gadget: g_multi ready
[  134.364855] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[  134.391441] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
[  134.424589] musb-hdrc musb-hdrc.0.auto: supports USB remote wakeup
[  134.424727] usb usb2: default language 0x0409
[  134.424786] usb usb2: udev 1, busnum 2, minor = 128
[  134.424809] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[  134.432380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  134.440086] usb usb2: Product: MUSB HDRC host driver
[  134.445375] usb usb2: Manufacturer: Linux 3.8.13-bone28 musb-hcd
[  134.451761] usb usb2: SerialNumber: musb-hdrc.0.auto
[  134.480621] usb usb2: usb_probe_device
[  134.480659] usb usb2: configuration #1 chosen from 1 choice
[  134.480757] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[  134.480998] hub 2-0:1.0: usb_probe_interface
[  134.481021] hub 2-0:1.0: usb_probe_interface - got id
[  134.481056] hub 2-0:1.0: USB hub found
[  134.496812] hub 2-0:1.0: 1 port detected
[  134.512018] hub 2-0:1.0: standalone hub
[  134.512047] hub 2-0:1.0: individual port power switching
[  134.512065] hub 2-0:1.0: no over-current protection
[  134.512082] hub 2-0:1.0: Single TT
[  134.512103] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
[  134.512121] hub 2-0:1.0: power on to power good time: 10ms
[  134.512191] hub 2-0:1.0: local power source is good
[  134.512345] hub 2-0:1.0: enabling power on all ports
[  134.613084] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[  134.613184] hub 2-0:1.0: hub_suspend
[  134.613230] usb usb2: bus auto-suspend, wakeup 1
[  136.747245] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[  136.765654] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[  136.791313] rtl8192c_dm_RF_Saving(): RF_Save
[  136.838243] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[  148.799994] rtw_set_ps_mode(): Enter 802.11 power save mode...
[  148.813796] rtl8192c_dm_RF_Saving(): RF_Normal
[  148.818613] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[  152.308288] cpufreq_cpu0: failed to scale voltage up: -22
[  152.608274] cpufreq_cpu0: failed to scale voltage up: -22
[  152.817739] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[  152.831146] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[  152.851169] rtl8192c_dm_RF_Saving(): RF_Save
[  152.915050] cpufreq_cpu0: failed to scale voltage up: -22
[  153.078534] cpufreq_cpu0: failed to scale voltage up: -22
[  153.085403] cpufreq_cpu0: failed to scale voltage up: -22