Created
March 10, 2024 16:17
-
-
Save acmeplus/24290b784c727c015c5b44bc094baf0d to your computer and use it in GitHub Desktop.
RG35XX Plus Boot via sunxi-fel
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ sunxi-fel -v -p spl spl/sunxi-spl.bin write 0x4a000000 u-boot.bin exec 0x4a000000 | |
| found DT name in SPL header: sun50i-h700-anbernic-rg35xxplus | |
| Stack pointers: sp_irq=0x00021400, sp=0x00053FD4 | |
| MMU is not enabled by BROM | |
| => Executing the SPL... done. | |
| 100% [================================================] 606 kB, 282.0 kB/s | |
| --- UART output: | |
| U-Boot SPL 2024.04-rc2-ga3dc27634a-dirty (Mar 10 2024 - 05:07:27 +0000) | |
| DRAM: 1024 MiB | |
| Trying to boot from FEL | |
| U-Boot 2024.04-rc2-ga3dc27634a-dirty (Mar 10 2024 - 05:07:27 +0000) Allwinner Technology | |
| CPU: Allwinner H616 (SUN50I) | |
| Model: Anbernic RG35XX Plus | |
| DRAM: 1 GiB | |
| Core: 55 devices, 17 uclasses, devicetree: separate | |
| WDT: Not starting watchdog@30090a0 | |
| MMC: mmc@4020000: 0, mmc@4021000: 1, mmc@4022000: 2 | |
| Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... | |
| In: serial@5000000 | |
| Out: serial@5000000 | |
| Err: serial@5000000 | |
| Net: No ethernet found. | |
| Hit any key to stop autoboot: 0 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| 1: batocera.linux | |
| Retrieving file: /boot/linux | |
| Retrieving file: /boot/initrd.lz4 | |
| append: initrd=/boot/initrd.lz4 label=BATOCERA loglevel=8 console=ttyS0,115200 console=tty0 earlycon | |
| Retrieving file: /boot/sun50i-h616-orangepi-zero2.dtb | |
| Moving Image from 0x40080000 to 0x40200000, end=41810000 | |
| ## Flattened Device Tree blob at 4fa00000 | |
| Booting using the fdt blob at 0x4fa00000 | |
| Working FDT set to 4fa00000 | |
| Loading Ramdisk to 49f27000, end 49fffa6b ... OK | |
| Loading Device Tree to 0000000049f1f000, end 0000000049f26380 ... OK | |
| Working FDT set to 49f1f000 | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 6.0.0-rc5+ (acmeplus@endymion) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GN4 | |
| [ 0.000000] Machine model: Anbernic RG35XX Plus | |
| [ 0.000000] earlycon: uart0 at MMIO32 0x0000000005000000 (options '115200n8') | |
| [ 0.000000] printk: bootconsole [uart0] enabled | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0x7fde1040-0x7fde2fff] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004003ffff] | |
| [ 0.000000] node 0: [mem 0x0000000040040000-0x000000007fffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] | |
| [ 0.000000] cma: Reserved 128 MiB at 0x0000000076c00000 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] ------------[ cut here ]------------ | |
| [ 0.000000] kernel BUG at arch/arm64/kernel/traps.c:497! | |
| [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP | |
| [ 0.000000] Modules linked in: | |
| [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc5+ #1 | |
| [ 0.000000] Hardware name: Anbernic RG35XX Plus (DT) | |
| [ 0.000000] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
| [ 0.000000] pc : do_undefinstr+0x29c/0x2f0 | |
| [ 0.000000] lr : do_undefinstr+0xcc/0x2f0 | |
| [ 0.000000] sp : ffff800009423ac0 | |
| [ 0.000000] x29: ffff800009423ac0 x28: ffff800009431740 x27: 0000000081000200 | |
| [ 0.000000] x26: ffff800008fdb998 x25: ffff80000900a818 x24: ffff8000094bbb08 | |
| [ 0.000000] x23: 00000000600000c5 x22: ffff800008026704 x21: ffff800009423c90 | |
| [ 0.000000] x20: 00000000d4000003 x19: ffff800009423b40 x18: ffffffffffffffff | |
| [ 0.000000] x17: 000000000021c9e8 x16: 000000007fde3618 x15: ffff8000894239c7 | |
| [ 0.000000] x14: ffffffffffffffff x13: 0000000000000018 x12: 0101010101010101 | |
| [ 0.000000] x11: 7f7f7f7f7f7f7f7f x10: 00007bfff4cea2d0 x9 : 0000000000000018 | |
| [ 0.000000] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 | |
| [ 0.000000] x5 : ffff800009423b40 x4 : ffff800009433488 x3 : 0000000000000000 | |
| [ 0.000000] x2 : 0000000000000001 x1 : ffff80000958d0f0 x0 : 00000000600000c5 | |
| [ 0.000000] Call trace: | |
| [ 0.000000] do_undefinstr+0x29c/0x2f0 | |
| [ 0.000000] el1_undef+0x2c/0x4c | |
| [ 0.000000] el1h_64_sync_handler+0x84/0xd0 | |
| [ 0.000000] el1h_64_sync+0x64/0x68 | |
| [ 0.000000] __arm_smccc_smc+0x10/0x40 | |
| [ 0.000000] __invoke_psci_fn_smc+0x38/0x70 | |
| [ 0.000000] psci_0_2_get_version+0x28/0x34 | |
| [ 0.000000] psci_0_2_init+0x30/0x280 | |
| [ 0.000000] psci_dt_init+0x60/0x9c | |
| [ 0.000000] setup_arch+0x3c0/0x5c8 | |
| [ 0.000000] start_kernel+0x84/0x6d0 | |
| [ 0.000000] __primary_switched+0xbc/0xc4 | |
| [ 0.000000] Code: 33103e80 2a0003f4 17ffff8d a9025bf5 (d4210000) | |
| [ 0.000000] ---[ end trace 0000000000000000 ]--- | |
| [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! | |
| [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- |
Batocera rootfs boot - linux 6.8.0 with apritzel patches
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.8.0-rc7-g2d190068f346 (acmeplus@endymion) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.4
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Anbernic RG35XX Plus
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x0000000040000000..0x000000004003ffff (256 KiB) nomap non-reusable secmon@40000000
[ 0.000000] earlycon: uart0 at MMIO32 0x0000000005000000 (options '115200n8')
[ 0.000000] printk: legacy bootconsole [uart0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7fdde9c0-0x7fde0fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000004003ffff]
[ 0.000000] node 0: [mem 0x0000000040040000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 22 pages/cpu s51368 r8192 d30552 u90112
[ 0.000000] pcpu-alloc: s51368 r8192 d30552 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: initrd=/boot/initrd.lz4 label=BATOCERA loglevel=8 console=ttyS0,115200 console=ttyS0 earlycon k
[ 0.000000] Unknown kernel command line parameters "earlyprintk label=BATOCERA", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB)
[ 0.000000] Memory: 949912K/1048576K available (16768K kernel code, 4678K rwdata, 11184K rodata, 9856K init, 608K bss, 65896K r)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.009802] Console: colour dummy device 80x25
[ 0.014766] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.026043] pid_max: default: 32768 minimum: 301
[ 0.031188] LSM: initializing lsm=capability,integrity
[ 0.036452] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.044580] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.053505] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.060995] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.068144] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.076694] rcu: Hierarchical SRCU implementation.
[ 0.081958] rcu: Max phase no-delay instances is 1000.
[ 0.089337] EFI services will not be available.
[ 0.094545] smp: Bringing up secondary CPUs ...
[ 0.100027] Detected VIPT I-cache on CPU1
[ 0.100109] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.100656] Detected VIPT I-cache on CPU2
[ 0.100702] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.101197] Detected VIPT I-cache on CPU3
[ 0.101242] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.101319] smp: Brought up 1 node, 4 CPUs
[ 0.139300] SMP: Total of 4 processors activated.
[ 0.144404] CPU: All CPU(s) started at EL2
[ 0.148556] CPU features: detected: 32-bit EL0 Support
[ 0.153904] CPU features: detected: 32-bit EL1 Support
[ 0.159557] CPU features: detected: CRC32 instructions
[ 0.165183] alternatives: applying system-wide alternatives
[ 0.172970] devtmpfs: initialized
[ 0.181523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.192185] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.200968] pinctrl core: initialized pinctrl subsystem
[ 0.208256] DMI not present or invalid.
[ 0.213429] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.221007] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.228532] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.236806] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.245501] audit: initializing netlink subsys (disabled)
[ 0.251537] audit: type=2000 audit(0.152:1): state=initialized audit_enabled=0 res=1
[ 0.252717] thermal_sys: Registered thermal governor 'step_wise'
[ 0.259978] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.266231] cpuidle: using governor menu
[ 0.277924] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.285334] ASID allocator initialised with 65536 entries
[ 0.293583] Serial: AMBA PL011 UART driver
[ 0.301398] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000
[ 0.314991] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000
[ 0.323401] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@3001000
[ 0.331662] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000
[ 0.340322] platform 7000000.rtc: Fixed dependency cycle(s) with /soc/clock@7010000
[ 0.348735] platform 7010000.clock: Fixed dependency cycle(s) with /soc/clock@3001000
[ 0.357021] platform 7010000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000
[ 0.368174] Modules: 21952 pages in range for non-PLT usage
[ 0.368180] Modules: 513472 pages in range for PLT usage
[ 0.374593] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.387779] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.394607] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.402004] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.408875] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.415882] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.422440] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.429802] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.437683] ACPI: Interpreter disabled.
[ 0.444308] iommu: Default domain type: Translated
[ 0.449498] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.456694] SCSI subsystem initialized
[ 0.460925] libata version 3.00 loaded.
[ 0.465035] usbcore: registered new interface driver usbfs
[ 0.471037] usbcore: registered new interface driver hub
[ 0.476807] usbcore: registered new device driver usb
[ 0.482646] pps_core: LinuxPPS API ver. 1 registered
[ 0.488097] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.497744] PTP clock support registered
[ 0.502101] EDAC MC: Ver: 3.0.0
[ 0.505926] scmi_core: SCMI protocol bus registered
[ 0.511768] FPGA manager framework
[ 0.515597] Advanced Linux Sound Architecture Driver Initialized.
[ 0.523273] vgaarb: loaded
[ 0.526605] clocksource: Switched to clocksource arch_sys_counter
[ 0.533229] VFS: Disk quotas dquot_6.6.0
[ 0.537197] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.544930] pnp: PnP ACPI: disabled
[ 0.556120] NET: Registered PF_INET protocol family
[ 0.561624] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.570811] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.580037] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.588552] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.597121] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.604676] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.611751] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.619050] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.626903] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.633466] RPC: Registered named UNIX socket transport module.
[ 0.639972] RPC: Registered udp transport module.
[ 0.645136] RPC: Registered tcp transport module.
[ 0.650304] RPC: Registered tcp-with-tls transport module.
[ 0.656326] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.663404] PCI: CLS 0 bytes, default 64
[ 0.668020] Unpacking initramfs...
[ 0.671922] kvm [1]: IPA Size Limit: 40 bits
[ 0.679309] kvm [1]: vgic interrupt IRQ9
[ 0.683535] kvm [1]: Hyp mode initialized successfully
[ 0.684999] Freeing initrd memory: 864K
[ 0.690680] Initialise system trusted keyrings
[ 0.698092] workingset: timestamp_bits=42 max_order=18 bucket_order=0
[ 0.705504] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.712151] NFS: Registering the id_resolver key type
[ 0.717723] Key type id_resolver registered
[ 0.722319] Key type id_legacy registered
[ 0.726740] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.733458] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.740985] 9p: Installing v9fs 9p2000 file system support
[ 0.810231] Key type asymmetric registered
[ 0.814723] Asymmetric key parser 'x509' registered
[ 0.820123] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.828246] io scheduler mq-deadline registered
[ 0.833212] io scheduler kyber registered
[ 0.837276] io scheduler bfq registered
[ 0.852408] EINJ: ACPI disabled.
[ 0.883578] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.894103] msm_serial: driver initialized
[ 0.898556] SuperH (H)SCI(F) driver initialized
[ 0.903679] STM32 USART driver initialized
[ 0.916079] loop: module loaded
[ 0.920587] megasas: 07.727.03.00-rc1
[ 0.931466] tun: Universal TUN/TAP device driver, 1.6
[ 0.937886] thunder_xcv, ver 1.0
[ 0.941229] thunder_bgx, ver 1.0
[ 0.944666] nicpf, ver 1.0
[ 0.948576] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.956507] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.962380] hclge is initializing
[ 0.965760] e1000: Intel(R) PRO/1000 Network Driver
[ 0.971115] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.977099] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.982547] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.989072] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.994963] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.001103] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.007852] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.014303] sky2: driver version 1.30
[ 1.019616] VFIO - User Level meta-driver version: 0.3
[ 1.027658] usbcore: registered new interface driver usb-storage
[ 1.037678] sun6i-rtc 7000000.rtc: registered as rtc0
[ 1.043307] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-02T00:00:09 UTC (86409)
[ 1.052166] i2c_dev: i2c /dev entries driver
[ 1.064081] sdhci: Secure Digital Host Controller Interface driver
[ 1.070282] sdhci: Copyright(c) Pierre Ossman
[ 1.075763] Synopsys Designware Multimedia Card Interface Driver
[ 1.083348] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.091507] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.099432] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000002
[ 1.107555] usbcore: registered new interface driver usbhid
[ 1.113676] usbhid: USB HID core driver
[ 1.121297] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.135326] NET: Registered PF_PACKET protocol family
[ 1.140975] 9pnet: Installing 9P2000 support
[ 1.145741] Key type dns_resolver registered
[ 1.161487] registered taskstats version 1
[ 1.166121] Loading compiled-in X.509 certificates
[ 1.192950] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 1.211207] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
[ 1.219965] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 1.229314] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
[ 1.238795] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
[ 1.249024] printk: legacy console [ttyS0] disabled
[ 1.275026] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 283, base_baud = 1500000) is a 16550A
[ 1.284399] printk: legacy console [ttyS0] enabled
[ 1.284399] printk: legacy console [ttyS0] enabled
[ 1.294454] printk: legacy bootconsole [uart0] disabled
[ 1.294454] printk: legacy bootconsole [uart0] disabled
[ 1.308735] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pg not found, using dummy regulator
[ 1.342895] 5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 284, base_baud = 1500000) is a 16550A
[ 1.351874] serial serial0: tty port ttyS1 registered
[ 1.362795] ehci-platform 5101000.usb: EHCI Host Controller
[ 1.365433] ohci-platform 5101400.usb: Generic Platform OHCI controller
[ 1.365521] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests
[ 1.366288] musb-hdrc musb-hdrc.2.auto: MUSB HDRC host driver
[ 1.366315] musb-hdrc musb-hdrc.2.auto: new USB bus registered, assigned bus number 1
[ 1.367097] hub 1-0:1.0: USB hub found
[ 1.367125] hub 1-0:1.0: 1 port detected
[ 1.368401] musb_handle_intr_disconnect 979: unhandled DISCONNECT transition (a_idle)
[ 1.368410] musb-hdrc musb-hdrc.2.auto: Babble
[ 1.375037] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2
[ 1.384319] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3
[ 1.390162] ohci-platform 5101400.usb: irq 286, io mem 0x05101400
[ 1.392525] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[ 1.396531] sun50i-h616-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
[ 1.396989] sunxi-rsb 7083000.rsb: RSB running at 3000000 Hz
[ 1.397944] ehci-platform 5101000.usb: irq 285, io mem 0x05101000
[ 1.398020] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP717 found
[ 1.398420] sunxi-mmc 4020000.mmc: Got CD GPIO
[ 1.399028] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ 1.406137] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pa not found, using dummy regulator
[ 1.407791] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator
[ 1.416147] debugfs: Directory 'vcc-1v8' with parent 'regulator' already present!
[ 1.418239] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pe not found, using dummy regulator
[ 1.423386] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator
[ 1.426184] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 1.430651] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
[ 1.433848] hub 3-0:1.0: USB hub found
[ 1.434315] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
[ 1.434714] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.435309] clk: Disabling unused clocks
[ 1.435446] ALSA device list:
[ 1.435452] No soundcards found.
[ 1.450626] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
[ 1.457232] hub 3-0:1.0: 1 port detected
[ 1.482351] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 1.485818] hub 2-0:1.0: USB hub found
[ 1.500666] sunxi-mmc 4021000.mmc: card claims to support voltages below defined range
[ 1.502366] hub 2-0:1.0: 1 port detected
[ 1.520179] mmc1: new high speed SDIO card at address 0001
[ 1.581029] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.621733] mmc0: new high speed SDXC card at address 5048
[ 1.623608] Freeing unused kernel memory: 9856K
[ 1.628039] mmcblk0: mmc0:5048 SD64G 58.0 GiB
[ 1.631891] Run /init as init process
[ 1.638817] mmcblk0: p1 p2
[ 1.639790] with arguments:
[ 1.645537] /init
[ 1.647814] earlyprintk
[ 1.650611] with environment:
[ 1.653747] HOME=/
[ 1.656109] TERM=linux
[ 1.658818] label=BATOCERA
[ 1.892160] loop0: detected capacity change from 0 to 2947952
mount: mounting [ 1.968839] loop1: detected capacity change from 0 to 2947952
overlay on /new_root failed: No such device
INIT: version booting
INIT: No inittab.d directory found
Tue Jan 1 01:00:00 CET 1980
Starting system message bus: [ 4.830622] random: crng init done
Could not create /var/lib/dbus/machine-id.vkYbrNej: No such file or directory
done
Starting syslog-ng: OK
Running sysctl: OK
Starting seatd: OK
Populating /dev using udev: [ 5.840951] udevd[207]: starting version 3.2.11
[ 5.900200] udevd[209]: starting eudev-3.2.11
done
Starting pipewire: Connection failure: Connection refused
pa_context_connect() failed: Connection refused
Failed to load cookie file from cookie: No such file or directory
OK
modprobe: FATAL: Module snd_seq not found in directory /lib/modules/6.8.0-rc7-g2d190068f346
modprobe: FATAL: Module sprdbt_tty not found in directory /lib/modules/6.8.0-rc7-g2d190068f346
modprobe: FATAL: Module sprdwl_ng not found in directory /lib/modules/6.8.0-rc7-g2d190068f346
Starting network: OK
Starting connman: done.
Starting share: [ 9.370567] EXT4-fs (mmcblk0p2): recovery complete
[ 9.377095] EXT4-fs (mmcblk0p2): mounted filesystem a8b20ac2-3a02-49b6-8430-0053d8d7ca84 r/w with ordered data mode. Quota mode.
done.
ln: failed to create symbolic link '/etc/machine-id': Read-only file system
Starting irqbalance: OK
Starting lirc: OK
Starting system: dos2unix: converting file /userdata/system/batocera.conf to Unix format...
done.
/etc/init.d/S26system: 30: cannot create /etc/hosts: Read-only file system
/etc/init.d/S26system: 31: cannot create /etc/hosts: Read-only file system
/usr/share/batocera/sysconfigs/batocera.conf: No such file or directory
/usr/share/batocera/sysconfigs/batocera.conf: No such file or directory
/usr/share/batocera/sysconfigs/batocera.conf: No such file or directory
Failed to load cookie file from cookie: No such file or directory
Failed to load cookie file from cookie: No such file or directory
Failed to load cookie file from cookie: No such file or directory
Failed to load cookie file from cookie: No such file or directory
Failed to load cookie file from cookie: No such file or directory
Failed to load cookie file from cookie: No such file or directory
Failed to load cookie file from cookie: No such file or directory
OK
syncthing service: disabled
Starting splash-mpv: Video: /usr/share/batocera/splash/splash.mp4: /usr/share/batocera/sysconfigs/batocera.conf: No such file or dy
/usr/share/batocera/sysconfigs/batocera.conf: No such file or directory
/usr/share/batocera/sysconfigs/batocera.conf: No such file or directory
OK
Starting rpcbind: OK
start-stop-daemon: warning: failed to kill 867: No such process
rfkill: cannot open /dev/rfkill: No such file or directory
/etc/init.d/S32bluetooth: 23: cannot create /sys/class/rfkill/rfkill0/state: Directory nonexistent
/etc/init.d/S32bluetooth: 25: cannot create /sys/class/rfkill/rfkill0/state: Directory nonexistent
Can't open serial port: No such file or directory
Can't initialize device: No such file or directory
No default controller available
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/dbus/bus.py", line 177, in activate_name_owner
return self.get_name_owner(bus_name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/dbus/bus.py", line 361, in get_name_owner
return self.call_blocking(BUS_DAEMON_NAME, BUS_DAEMON_PATH,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/dbus/connection.py", line 652, in call_blocking
reply_message = self.send_message_with_reply_and_block(
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NameHasNoOwner: Could not get owner of name 'org.bluez': no such name
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/bin/batocera-bluetooth-agent", line 491, in <module>
obj = bus.get_object("org.bluez", "/org/bluez")
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/dbus/bus.py", line 241, in get_object
return self.ProxyObjectClass(self, bus_name, object_path,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/dbus/proxies.py", line 250, in __init__
self._named_service = conn.activate_name_owner(bus_name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/dbus/bus.py", line 182, in activate_name_owner
self.start_service_by_name(bus_name)
File "/usr/lib/python3.11/site-packages/dbus/bus.py", line 277, in start_service_by_name
return (True, self.call_blocking(BUS_DAEMON_NAME, BUS_DAEMON_PATH,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/site-packages/dbus/connection.py", line 652, in call_blocking
reply_message = self.send_message_with_reply_and_block(
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
cat: /sys/class/graphics/fb0/virtual_size: No such file or directory
/etc/init.d/S03system-splash: 38: test: -a: unexpected operator
cat: /sys/class/graphics/fb0/virtual_size: No such file or directory
Orange pi zero 2w kernel 5.4 patched with boot0 from rg35xx-plus legacy:
[109]HELLO! BOOT0 is starting!
[112]BOOT0 commit : 749c1f9a-dirty
[116]set pll start
[118]periph0 has been enabled
[121]set pll end
[123][pmu]: bus read error
[126][pmu]: bus read error
[129]PMU: AXP2202
[137]vaild para:8 select dram para0
[140]board init ok
[142]rtc[2] value = 0xf
[145]DRAM BOOT DRIVE INFO: V0.651
[148]the chip id is 0x6c00
[151]chip id check OK
[153]DRAM_VCC set to 1100 mv
[156][DST] Dram DST Loop1
[181]read_calibration error
[194]read_calibration error
[208]read_calibration error
[222]read_calibration error
[236]read_calibration error
[250]read_calibration error
[264]read_calibration error
[278]read_calibration error
[291]read_calibration error
[305]read_calibration error
[308]retraining final error
[325][AUTO DEBUG]32bit,1 ranks training success!
[485][DST] Lclk,0x00008888,Memtest Pass
[489][DST] Clk =672 MHz
[491][DST] R_2d
[1670][DST] R_2d_hv_D2:0x14-0x5c,0x49(314mV),0
[1675][DST] R_2d_hv_D2:0x34~0x44,0x3c
[1679][DST] R_2d tpr6 = 0x3c808080
[1689][DST] R_1st
[1704][DST] DB0 R_1st:3,0~25,26,0x06
[1722][DST] DB1 R_1st:3,0~26,27,0x07
[1739][DST] DB2 R_1st:3,0~25,26,0x06
[1756][DST] DB3 R_1st:3,0~25,26,0x06
[1760][DST] R_1st Tpr12 = 0x06060706
[1764][DST] W_2st
[1848][DST] DB0 W_2st:0,17~38,22,0x1b
[1920][DST] DB1 W_2st:0,20~44,25,0x20
[1982][DST] DB2 W_2st:0,19~44,26,0x1f
[2041][DST] DB3 W_2st:0,16~40,25,0x1c
[2045][DST] W_2st Tpr11 = 0x1c1f201b
[2048][DST] R_2st
[2080][DST] DB0 R_2st:3,0~24,25,0x06
[2120][DST] DB1 R_2st:3,0~25,26,0x06
[2150][DST] DB2 R_2st:3,0~22,23,0x05
[2183][DST] DB3 R_2st:3,0~24,25,0x06
[2187][DST] R_2st Tpr12 = 0x06050606
[2351][DST] RV_C, VW:0x36-0x42, DW:120ps
[2448][DST] Dram DST Success
[2451]DRAM CLK =672 MHZ
[2453]DRAM Type =8 (3:DDR3,4:DDR4,7:LPDDR3,8:LPDDR4)
[2465]Actual DRAM SIZE =1024 M
[2468]DRAM SIZE =1024 MBytes, para1 = 30fa, para2 = 4000000, dram_tpr13 = 2006c61
[2482]DRAM simple test OK.
[2484]rtc standby flag is 0x0, super standby flag is 0x0
[2490]dram size =1024
[2492]key press :
[2495]card no is 0
[2497]sdcard 0 line count 4
[2499][mmc]: mmc driver ver 2021-10-12 13:56
[2504][mmc]: b mmc 0 bias 0
[2512][mmc]: Wrong media type 0x0
[2515][mmc]: ***Try SD card 0***
[2524][mmc]: HSSDR52/SDR25 4 bit
[2528][mmc]: 50000000 Hz
[2530][mmc]: 59344 MB
[2532][mmc]: ***SD/MMC 0 init OK!!!***
[2632]Loading boot-pkg Succeed(index=0).
[2636][mmc]: b mmc 0 bias 0
[2639]Entry_name = u-boot
[2647]Entry_name = monitor
[2651]Entry_name = dtbo
[2654]Entry_name = optee
[2659]Entry_name = dtb
[2662]Jump to second Boot.
NOTICE: BL3-1: v1.0(debug):54937d5
NOTICE: BL3-1: Built : 17:44:59, 2021-12-13
NOTICE: BL3-1 commit: 8
NOTICE: cpuidle init version V2.0
ERROR: Error initializing runtime service tspd_fast
NOTICE: BL3-1: Preparing for EL3 exit to normal world
NOTICE: BL3-1: Next image address = 0x4a000000
?OTICE: BL3-1: Next image spsr = 0x1d3
U-Boot 2018.05-orangepi (Sep 12 2023 - 14:27:36 +0800) Allwinner Technology
[02.736]CPU: Allwinner Family
[02.739]Model: Orange Pi Zero2w
I2C: FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL
ready
[02.833]DRAM: 1 GiB
[02.836]Relocation Offset is: 35efe000
[02.873]secure enable bit: 0
[02.876]smc_tee_inform_fdt failed with: ffffffff
[02.880]pmu_axp1530_probe pmic_bus_read fail
[02.884]pmu_axp806_probe pmic_bus_read fail
[02.888]pmu_axp858_probe pmic_bus_read fail
[02.892]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=400Mhz
[02.899]gic: sec monitor mode
[02.902]flash init start
[02.904]workmode = 0,storage type = 1
[02.907][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[02.913][mmc]: get sdc_type fail and use default host:tm1.
[02.921][mmc]: Using default timing para
[02.924][mmc]: SUNXI SDMMC Controller Version:0x40200[02.942][mmc]: card_caps:0x3000000a
[02.945][mmc]: host_caps:0x3000003f
[02.949]sunxi flash init ok
[02.952]drv_disp_init
of_clk_get: index is error,reset it.
tv_init()950 fetch tv0 err.
[03.023]drv_disp_init finish
[03.029]Loading Environment from FAT... [03.033][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[03.039][mmc]: get sdc_type fail and use default host:tm1.
[03.046][mmc]: Using default timing para
[03.050][mmc]: SUNXI SDMMC Controller Version:0x40200[03.054][mmc]: (SD)[03.056][mmc]: , ** Bad device mmc 1 **
Failed (-5)
[03.062]boot_gui_init:start
Partition Map for MMC device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 40960 120250368 c90ad7cc-01 83
248 bytes read in 8 ms (30.3 KiB/s)
Partition Map for MMC device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 40960 120250368 c90ad7cc-01 83
248 bytes read in 8 ms (30.3 KiB/s)
Set HDMI disp_mode to 1080p60
[03.121]tcon_tv clk get failed
Partition Map for MMC device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 40960 120250368 c90ad7cc-01 83
248 bytes read in 8 ms (30.3 KiB/s)
Set fb0_width to 1920
Set fb0_height to 1080
[03.267]boot_gui_init:finish
[03.270]usb burn from boot
delay time 0
weak:otg_phy_config
[03.284]usb prepare ok
[03.707]usb sof ok
[03.708]usb probe ok
[03.710]usb setup ok
set address 0xa
set address 0xa ok
[06.716]do_burn_from_boot usb : have no handshake
disable nand error: FDT_ERR_BADPATH
[06.743]update dts
Hit any key to stop autoboot: 0
no mmc device at slot 1
[07.767][mmc]: card_caps:0x3000000a
[07.770][mmc]: host_caps:0x3000003f
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3582 bytes read in 8 ms (436.5 KiB/s)
## Executing script at 43100000
Boot script loaded from mmc
248 bytes read in 8 ms (30.3 KiB/s)
13985753 bytes read in 1173 ms (11.4 MiB/s)
27899976 bytes read in 2325 ms (11.4 MiB/s)
## Booting kernel from Legacy Image at 41000000 ...
Image Name:
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 27899912 Bytes = 26.6 MiB
Load Address: 41000000
Entry Point: 41000000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 43300000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 13985689 Bytes = 13.3 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 492a9000, end 49fff799 ... OK
## Linux machid: 00000000, FDT addr: 7beca6d8
Starting kernel ...
[ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000][ T0] Linux version 5.4.125 (root@orangepi5) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1.0.
0 SMP Tue Sep 12 15:01:52 CST 2023
[ 0.000000][ T0] Machine model: Orange Pi Zero2w
[ 0.000000][ T0] Malformed early option 'earlycon'
[ 0.000000][ T0] disp reserve base 0x7bf6f000 ,size 0x7e9000
[ 0.000000][ T0] cma: Reserved 16 MiB at 0x000000007f000000
[ 0.000000][ T0] On node 0 totalpages: 262144
[ 0.000000][ T0] DMA32 zone: 4096 pages used for memmap
[ 0.000000][ T0] DMA32 zone: 0 pages reserved
[ 0.000000][ T0] DMA32 zone: 262144 pages, LIFO batch:63
[ 0.000000][ T0] psci: probing for conduit method from DT.
[ 0.000000][ T0] psci: PSCIv1.0 detected in firmware.
[ 0.000000][ T0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000][ T0] psci: Trusted OS migration not required
[ 0.000000][ T0] psci: SMC Calling Convention v1.0
[ 0.000000][ T0] percpu: Embedded 23 pages/cpu s53272 r8192 d32744 u94208
[ 0.000000][ T0] pcpu-alloc: s53272 r8192 d32744 u94208 alloc=23*4096
[ 0.000000][ T0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000][ T0] Detected VIPT I-cache on CPU0
[ 0.000000][ T0] CPU features: detected: ARM erratum 845719
[ 0.000000][ T0] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000][ T0] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000][ T0] Kernel command line: root=UUID=adb0523d-da08-4a54-9c4c-d549a5cd714d rootwait rootfstype=ext4 earlycon splash plymouth.ignore-serial-consoles cons
ole=ttyAS0,115200 console=tty1 consoleblank=0 loglevel=8 ubootpart=c90ad7cc-01 disp_reserve=8294400,0x7bf6f000
[ 0.000000][ T0] printk: log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000][ T0] printk: log_buf_len total cpu_extra contributions: 393216 bytes
[ 0.000000][ T0] printk: log_buf_len min size: 131072 bytes
[ 0.000000][ T0] printk: log_buf_len: 524288 bytes
[ 0.000000][ T0] printk: early log buf free: 128956(98%)
[ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000][ T0] Memory: 942576K/1048576K available (16574K kernel code, 1582K rwdata, 6104K rodata, 2944K init, 907K bss, 89616K reserved, 16384K cma-reserved)
[ 0.000000][ T0] random: get_random_u64 called from __kmem_cache_create+0x2c/0x400 with crng_init=0
[ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000][ T0] rcu: Hierarchical RCU implementation.
[ 0.000000][ T0] rcu: RCU event tracing is enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000][ T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000][ T0] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.000000][ T0] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000][ T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004][ T0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000129][ T0] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000731][ T0] Console: colour dummy device 80x25
[ 0.001092][ T0] printk: console [tty1] enabled
[ 0.001130][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001148][ T0] pid_max: default: 32768 minimum: 301
[ 0.001284][ T0] LSM: Security Framework initializing
[ 0.001393][ T0] Smack: Initializing.
[ 0.001402][ T0] Smack: Netfilter enabled.
[ 0.001410][ T0] Smack: IPv6 Netfilter enabled.
[ 0.001428][ T0] TOMOYO Linux initialized
[ 0.001495][ T0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.001515][ T0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.001573][ T0] *** VALIDATE tmpfs ***
[ 0.002101][ T0] *** VALIDATE proc ***
[ 0.002382][ T0] *** VALIDATE cgroup1 ***
[ 0.002397][ T0] *** VALIDATE cgroup2 ***
[ 0.003198][ T1] ASID allocator initialised with 32768 entries
[ 0.003373][ T1] rcu: Hierarchical SRCU implementation.
[ 0.006171][ T1] BOOTEVENT: 6.166082: ON
[ 0.006419][ T1] smp: Bringing up secondary CPUs ...
[ 0.006895][ T0] Detected VIPT I-cache on CPU1
[ 0.006955][ T0] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007475][ T0] Detected VIPT I-cache on CPU2
[ 0.007501][ T0] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007964][ T0] Detected VIPT I-cache on CPU3
[ 0.007989][ T0] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.008051][ T1] smp: Brought up 1 node, 4 CPUs
[ 0.008109][ T1] SMP: Total of 4 processors activated.
[ 0.008120][ T1] CPU features: detected: 32-bit EL0 Support
[ 0.008132][ T1] CPU features: detected: CRC32 instructions
[ 0.026687][ T1] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.026715][ T1] CPU: All CPU(s) started at EL1
[ 0.026748][ T12] alternatives: patching kernel code
[ 0.027271][ T1] CPU3: update max cpu_capacity 1024
[ 0.027978][ C0] CPU0: update max cpu_capacity 1024
[ 0.028304][ T1] devtmpfs: initialized
[ 0.038814][ T1] Registered cp15_barrier emulation handler
[ 0.038835][ T1] Registered setend emulation handler
[ 0.039023][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.039053][ T1] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.039927][ T1] xor: measuring software checksum speed
[ 0.076029][ T1] 8regs : 1934.000 MB/sec
[ 0.116062][ T1] 32regs : 2287.000 MB/sec
[ 0.156095][ T1] arm64_neon: 2011.000 MB/sec
[ 0.156106][ T1] xor: using function: 32regs (2287.000 MB/sec)
[ 0.156168][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.157076][ T1] NET: Registered protocol family 16
[ 0.159103][ T1] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.159151][ T1] audit: initializing netlink subsys (disabled)
[ 0.159321][ T35] audit: type=2000 audit(0.156:1): state=initialized audit_enabled=0 res=1
[ 0.159748][ T1] cpuidle: using governor menu
[ 0.160259][ T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.183350][ T1] ccu: sunxi ccu init OK
[ 0.183620][ T1] r_ccu: sunxi ccu init OK
[ 0.183632][ T1] Sunxi ccu sun50iw9-r init OK
[ 0.184251][ T1] sun50iw9-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
[ 0.195248][ T1] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.195267][ T1] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.195280][ T1] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.195293][ T1] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.196445][ T1] cryptd: max_cpu_qlen set to 1000
[ 0.264220][ T1] raid6: neonx8 gen() 1328 MB/s
[ 0.332282][ T1] raid6: neonx8 xor() 1236 MB/s
[ 0.400340][ T1] raid6: neonx4 gen() 1291 MB/s
[ 0.468373][ T1] raid6: neonx4 xor() 1197 MB/s
[ 0.536463][ T1] raid6: neonx2 gen() 974 MB/s
[ 0.604508][ T1] raid6: neonx2 xor() 978 MB/s
[ 0.672570][ T1] raid6: neonx1 gen() 645 MB/s
[ 0.740606][ T1] raid6: neonx1 xor() 735 MB/s
[ 0.808699][ T1] raid6: int64x8 gen() 964 MB/s
[ 0.876731][ T1] raid6: int64x8 xor() 655 MB/s
[ 0.944793][ T1] raid6: int64x4 gen() 839 MB/s
[ 1.012888][ T1] raid6: int64x4 xor() 629 MB/s
[ 1.080980][ T1] raid6: int64x2 gen() 592 MB/s
[ 1.149025][ T1] raid6: int64x2 xor() 512 MB/s
[ 1.217151][ T1] raid6: int64x1 gen() 395 MB/s
[ 1.285157][ T1] raid6: int64x1 xor() 365 MB/s
[ 1.285168][ T1] raid6: using algorithm neonx8 gen() 1328 MB/s
[ 1.285178][ T1] raid6: .... xor() 1236 MB/s, rmw enabled
[ 1.285188][ T1] raid6: using neon recovery algorithm
[ 1.285399][ T1] fbcon: Taking over console
[ 1.298171][ T1] iommu: Default domain type: Translated
[ 1.298310][ T1] sunxi iommu: irq = 39
[ 1.298983][ T1] SCSI subsystem initialized
[ 1.299189][ T1] usbcore: registered new interface driver usbfs
[ 1.299233][ T1] usbcore: registered new interface driver hub
[ 1.299267][ T1] usbcore: registered new device driver usb
[ 1.299343][ T1] videodev: Linux video capture interface: v2.00
[ 1.299684][ T1] Advanced Linux Sound Architecture Driver Initialized.
[ 1.300136][ T1] Bluetooth: Core ver 2.22
[ 1.300170][ T1] NET: Registered protocol family 31
[ 1.300180][ T1] Bluetooth: HCI device and connection manager initialized
[ 1.300197][ T1] Bluetooth: HCI socket layer initialized
[ 1.300211][ T1] Bluetooth: L2CAP socket layer initialized
[ 1.300232][ T1] Bluetooth: SCO socket layer initialized
[ 1.300264][ T1] NetLabel: Initializing
[ 1.300273][ T1] NetLabel: domain hash size = 128
[ 1.300281][ T1] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.300352][ T1] NetLabel: unlabeled traffic allowed by default
[ 1.300546][ T1] pwm module init!
[ 1.301268][ T1] input: sunxi-keyboard as /devices/virtual/input/input0
[ 1.301531][ T1] sun50iw9-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator
[ 1.301740][ T1] twi twi5: twi5 supply twi not found, using dummy regulator
[ 1.302768][ T1] axp20x-i2c 5-0036: AXP20x variant AXP1530 found
[ 1.303022][ T1] sunxi_i2c_do_xfer()1814 - [i2c5] incomplete xfer (status: 0x20, dev addr: 0x36)
[ 1.303434][ T1] sunxi_i2c_do_xfer()1814 - [i2c5] incomplete xfer (status: 0x20, dev addr: 0x36)
[ 1.303451][ T1] axp1530-dcdc1: failed to get the current voltage(-70)
[ 1.303469][ T1] axp2101-regulator axp2101-regulator.0: Failed to register dcdc1
[ 1.303490][ T1] axp2101-regulator: probe of axp2101-regulator.0 failed with error -70
[ 1.303807][ T1] axp20x-i2c 5-0036: AXP20X driver loaded
[ 1.303855][ T1] sunxi_i2c_probe()2260 - [i2c5] probe success
[ 1.304603][ T1] clocksource: Switched to clocksource arch_sys_counter
[ 1.304622][ T1] *** VALIDATE bpf ***
[ 1.304884][ T1] VFS: Disk quotas dquot_6.6.0
[ 1.304950][ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.305016][ T1] *** VALIDATE ramfs ***
[ 1.305039][ T1] *** VALIDATE hugetlbfs ***
[ 1.305262][ T1] TOMOYO: 2.6.0
[ 1.305274][ T1] Mandatory Access Control activated.
[ 1.312881][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 1.312885][ T1] thermal_sys: Registered thermal governor 'power_allocator'
[ 1.313590][ T1] NET: Registered protocol family 2
[ 1.313720][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 1.314470][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 1.314513][ T1] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 1.314598][ T1] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 1.314759][ T1] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.314868][ T1] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.314907][ T1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.315066][ T1] NET: Registered protocol family 1
[ 1.315538][ T1] RPC: Registered named UNIX socket transport module.
[ 1.315551][ T1] RPC: Registered udp transport module.
[ 1.315560][ T1] RPC: Registered tcp transport module.
[ 1.315570][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.315943][ T1] NET: Registered protocol family 44
[ 1.317411][ T1] Trying to unpack rootfs image as initramfs...
[ 2.547002][ T1] Freeing initrd memory: 13656K
[ 2.548317][ T1] kvm [1]: HYP mode not available
[ 2.551303][ T1] Initialise system trusted keyrings
[ 2.551447][ T1] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 2.556172][ T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.556731][ T1] NFS: Registering the id_resolver key type
[ 2.556762][ T1] Key type id_resolver registered
[ 2.556772][ T1] Key type id_legacy registered
[ 2.556789][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.556807][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 2.556820][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.557786][ T1] Key type cifs.idmap registered
[ 2.558018][ T1] fuse: init (API version 7.31)
[ 2.558078][ T1] *** VALIDATE fuse ***
[ 2.558095][ T1] *** VALIDATE fuse ***
[ 2.559711][ T1] Smack: Registering netfilter hooks
[ 2.601736][ T1] NET: Registered protocol family 38
[ 2.601756][ T1] Key type asymmetric registered
[ 2.601768][ T1] Asymmetric key parser 'x509' registered
[ 2.601810][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 2.601930][ T1] io scheduler mq-deadline registered
[ 2.601942][ T1] io scheduler kyber registered
[ 2.602104][ T1] atomic64_test: passed
[ 2.603611][ T1] [DISP]disp_module_init
[ 2.603859][ T1] disp 1000000.disp: Adding to iommu group 0
[ 2.604410][ T1] [DISP] disp_init,line:2460:
[ 2.604412][ T1] smooth display screen:0 type:4 mode:10
[ 2.605123][ T1] display_fb_request,fb_id:0
[ 2.623521][ T1] Console: switching to colour frame buffer device 240x67
[ 2.652972][ T1] [DISP]disp_module_init finish
[ 2.653663][ T1] rtc_ccu: sunxi ccu init OK
[ 2.654348][ T1] sunxi_sid_init()696 - insmod ok
[ 2.654986][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.656619][ T1] misc dump reg init
[ 2.657069][ T1] g2d 1480000.g2d: Adding to iommu group 0
[ 2.657526][ T1] G2D: Module initialized.major:243
[ 2.657704][ T1] deinterlace 1420000.deinterlace: Adding to iommu group 0
[ 2.658084][ T1] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x0
[ 2.658359][ T1] Gralloc Module initialized.
[ 2.658778][ T13] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.665691][ T1] brd: module loaded
[ 2.673339][ T1] loop: module loaded
[ 2.673859][ T1] zram: Added device: zram0
[ 2.674270][ T1] [ADDR_MGT] addr_mgt_probe: module version: v1.0.11
[ 2.674738][ T1] [ADDR_MGT] addr_mgt_probe: success.
[ 2.676347][ T1] libphy: Fixed MDIO Bus: probed
[ 2.676624][ T1] tun: Universal TUN/TAP device driver, 1.6
[ 2.676997][ T1] PPP generic driver version 2.4.2
[ 2.677232][ T1] PPP BSD Compression module registered
[ 2.677358][ T1] PPP Deflate Compression module registered
[ 2.677513][ T1] PPP MPPE Compression module registered
[ 2.677640][ T1] NET: Registered protocol family 24
[ 2.677770][ T1] PPTP driver version 0.8.5
[ 2.678153][ T1] usbcore: registered new interface driver r8152
[ 2.678328][ T1] usbcore: registered new interface driver asix
[ 2.678544][ T1] usbcore: registered new interface driver ax88179_178a
[ 2.678723][ T1] usbcore: registered new interface driver cdc_ether
[ 2.678894][ T1] usbcore: registered new interface driver net1080
[ 2.679062][ T1] usbcore: registered new interface driver cdc_subset
[ 2.679240][ T1] usbcore: registered new interface driver zaurus
[ 2.679415][ T1] usbcore: registered new interface driver cdc_ncm
[ 2.679560][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.679753][ T1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.680146][ T1] usbcore: registered new interface driver uas
[ 2.680318][ T1] usbcore: registered new interface driver usb-storage
[ 2.680496][ T1] usbcore: registered new interface driver ums-alauda
[ 2.680693][ T1] usbcore: registered new interface driver ums-cypress
[ 2.680867][ T1] usbcore: registered new interface driver ums-datafab
[ 2.681045][ T1] usbcore: registered new interface driver ums_eneub6250
[ 2.681222][ T1] usbcore: registered new interface driver ums-freecom
[ 2.681395][ T1] usbcore: registered new interface driver ums-isd200
[ 2.686557][ T1] usbcore: registered new interface driver ums-jumpshot
[ 2.691594][ T1] usbcore: registered new interface driver ums-karma
[ 2.696520][ T1] usbcore: registered new interface driver ums-onetouch
[ 2.701355][ T1] usbcore: registered new interface driver ums-realtek
[ 2.706075][ T1] usbcore: registered new interface driver ums-sddr09
[ 2.710688][ T1] usbcore: registered new interface driver ums-sddr55
[ 2.715210][ T1] usbcore: registered new interface driver ums-usbat
[ 2.720156][ T1] usbcore: registered new interface driver xpad
[ 2.724617][ T1] usbcore: registered new interface driver usb_acecad
[ 2.729103][ T1] usbcore: registered new interface driver aiptek
[ 2.733537][ T1] usbcore: registered new interface driver gtco
[ 2.737915][ T1] usbcore: registered new interface driver hanwang
[ 2.742259][ T1] usbcore: registered new interface driver kbtab
[ 2.746699][ T1] axp2101_pek: axp2101-pek can not register without irq
[ 2.750985][ T1] axp2101-pek: probe of axp2101-pek.0 failed with error -22
[ 2.755403][ T1] sunxi_gpadc_init,1967, success
[ 2.759829][ T1] sunxi-rtc 7000000.rtc: reset_control_get() failed
[ 2.764147][ T1] sunxi-rtc 7000000.rtc: Fail to get clock 'rtc-spi'
[ 2.768885][ T1] sunxi-rtc 7000000.rtc: registered as rtc0
[ 2.773172][ T1] sunxi-rtc 7000000.rtc: sunxi rtc probed
[ 2.777562][ T1] i2c /dev entries driver
[ 2.781990][ T1] IR NEC protocol handler initialized
[ 2.786231][ T1] IR RC5(x/sz) protocol handler initialized
[ 2.790682][ T1] usbcore: registered new interface driver uvcvideo
[ 2.794931][ T1] USB Video Class driver (1.1.1)
[ 2.799131][ T1] sunxi cedar version 1.1
[ 2.803395][ T1] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[ 2.807649][ T1] VE: install start!!!
[ 2.807649][ T1]
[ 2.815988][ T1] VE: cedar-ve the get irq is 20
[ 2.815988][ T1]
[ 2.824223][ T1] VE: ve_debug_proc_info:(____ptrval____), data:(____ptrval____), lock:(____ptrval____)
[ 2.824223][ T1]
[ 2.832633][ T1] VE: install end!!!
[ 2.832633][ T1]
[ 2.840901][ T1] sunxi-cedar soc@3000000:ve1@1c0e000: Adding to iommu group 0
[ 2.845087][ T1] VE: device ve1 just use to add iommu master
[ 2.849409][ T1] Driver for 1-wire Dallas network protocol.
[ 2.854192][ T1] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 2.858826][ T1] device-mapper: uevent: version 1.0.3
[ 2.863413][ T1] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 2.868092][ T1] Bluetooth: HCI UART driver ver 2.3
[ 2.872579][ T1] Bluetooth: HCI UART protocol H4 registered
[ 2.877051][ T1] Bluetooth: HCI UART protocol BCSP registered
[ 2.881608][ T1] [BT_LPM] bluesleep_probe: get gpio bt_hostwake failed
[ 2.881608][ T1]
[ 2.890493][ T1] sunxi-btlpm: probe of soc@3000000:btlpm failed with error -22
[ 2.896464][ T1] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.901133][ T1] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.907970][ T1] usbcore: registered new interface driver usbhid
[ 2.912644][ T1] usbhid: USB HID core driver
[ 2.917588][ T1] ashmem: initialized
[ 2.922303][ T1] exFAT: Version 1.3.0
[ 2.927768][ T1] optee: probing for conduit method from DT.
[ 2.932592][ T1] optee: api uid mismatch
[ 2.937417][ T1] drm config service not available: FFFFFFFF
[ 2.937675][ T1] usbcore: registered new interface driver snd-usb-audio
[ 2.947903][ T1] netem: version 1.3
[ 2.953458][ T1] xt_time: kernel timezone is -0000
[ 2.958357][ T1] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 2.963381][ T1] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 2.968689][ T1] IPVS: ipvs loaded.
[ 2.973821][ T1] IPVS: [rr] scheduler registered.
[ 2.979116][ T1] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 2.984793][ T1] gre: GRE over IPv4 demultiplexor driver
[ 2.990107][ T1] ip_gre: GRE over IPv4 tunneling driver
[ 2.996341][ T1] IPv4 over IPsec tunneling driver
[ 3.002281][ T1] Initializing XFRM netlink socket
[ 3.007742][ T1] IPsec XFRM device driver
[ 3.013586][ T1] NET: Registered protocol family 10
[ 3.020326][ T1] Segment Routing with IPv6
[ 3.025990][ T1] mip6: Mobile IPv6
[ 3.032121][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.038594][ T1] ip6_gre: GRE over IPv6 tunneling driver
[ 3.044757][ T1] NET: Registered protocol family 17
[ 3.050590][ T1] NET: Registered protocol family 15
[ 3.056435][ T1] Bridge firewalling registered
[ 3.062508][ T1] Bluetooth: RFCOMM TTY layer initialized
[ 3.068426][ T1] Bluetooth: RFCOMM socket layer initialized
[ 3.074431][ T1] Bluetooth: RFCOMM ver 1.11
[ 3.080355][ T1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.086225][ T1] Bluetooth: BNEP filters: protocol multicast
[ 3.092041][ T1] Bluetooth: BNEP socket layer initialized
[ 3.097830][ T1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.103644][ T1] Bluetooth: HIDP socket layer initialized
[ 3.109664][ T1] l2tp_core: L2TP core driver, V2.0
[ 3.115502][ T1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.121328][ T1] tipc: Activated (version 2.0.0)
[ 3.127203][ T1] NET: Registered protocol family 30
[ 3.133101][ T1] tipc: Started in single node mode
[ 3.139631][ T1] registered taskstats version 1
[ 3.145387][ T1] Loading compiled-in X.509 certificates
[ 3.155095][ T1] Loaded X.509 cert 'Build time autogenerated kernel key: e4600ab75408f3c855db4e9316d1e14c5115b6a2'
[ 3.161251][ T1] Key type ._fscrypt registered
[ 3.167204][ T1] Key type .fscrypt registered
[ 3.173161][ T1] Key type fscrypt-provisioning registered
[ 3.180046][ T1] Btrfs loaded, crc32c=crc32c-generic
[ 3.186763][ T1] Key type big_key registered
[ 3.193097][ T1] Key type encrypted registered
[ 3.199817][ T1] HDMI 2.0 driver init start!
[ 3.205651][ T1] boot_hdmi=true
[ 3.212730][ T1] Can not find the node of esm
[ 3.218542][ T1] ERROR: pinctrl_get for HDMI2.0 DDC fail
[ 3.224396][ T1] Get hdmi_power0:aldo1
[ 3.230150][ T1] (NULL device *): deviceless supply aldo1 not found, using dummy regulator
[ 3.236047][ T1] Get hdmi_power1:dcdc1
[ 3.241782][ T1] (NULL device *): deviceless supply dcdc1 not found, using dummy regulator
[ 3.248935][ T1] hdmi_cec_init
[ 3.255263][ T1] HDMI2.0 module init end
[ 3.271875][ T33] [DISP] disp_device_attached,line:158:
[ 3.271881][ T33] attached ok, mgr0<-->device0, type=4
[ 3.283573][ T33] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8
[ 3.289623][ T33] [DISP] disp_hdmi_set_mode,line:680:
[ 3.289625][ T33] hdmi_set_mode is null!
[ 3.314935][ T27] sun50iw9-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
[ 3.322210][ T27] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02)
[ 3.328546][ T27] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[ 3.334624][ T27] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[ 3.340669][ T27] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[ 3.346713][ T27] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[ 3.352693][ T27] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[ 3.358649][ T27] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[ 3.364537][ T27] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[ 3.370346][ T27] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[ 3.376164][ T33] [DISP] de_rtmx_mgr_apply,line:456:
[ 3.376167][ T33] ctx->output.hdr_type=0
[ 3.387567][ T33] [DISP] de_rtmx_mgr_apply,line:474:
[ 3.387568][ T33] ctx->output.hdr_type=0
[ 3.399440][ T27] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[ 3.405784][ T27] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.411580][ T27] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[ 3.429948][ T27] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.448832][ T27] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[ 3.455311][ T27] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02)
[ 3.461487][ T27] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[ 3.467453][ T27] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[ 3.473367][ T27] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[ 3.479260][ T27] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[ 3.485109][ T27] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[ 3.490912][ T27] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[ 3.496633][ T27] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[ 3.502291][ T27] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[ 3.507967][ T27] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[ 3.513825][ T33] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.520158][ T27] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.527835][ T33] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.536219][ T33] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.542207][ T27] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.549903][ T33] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.560674][ T27] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[ 3.566923][ T27] sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator
[ 3.573269][ T27] uart uart0: get regulator failed
[ 3.579271][ T27] uart uart0: uart0 supply uart not found, using dummy regulator
[ 3.585468][ T27] uart uart0: uart0 error to get fifo size property
[ 3.591563][ T27] uart0: ttyAS0 at MMIO 0x5000000 (irq = 42, base_baud = 1500000) is a SUNXI
[ 3.597743][ T27] sw_console_setup()1806 - console setup baud 115200 parity n bits 8, flow n
[ 3.649646][ T33] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 3.649665][ T33] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[ 3.660719][ T144] HDMI cable is connected
[ 3.661482][ T27] printk: console [ttyAS0] enabled
[ 4.824323][ C0] random: fast init done
[ 4.827227][ T33] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 6.471821][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RE !!
[ 6.472128][ T27] uart uart1: get regulator failed
[ 6.497755][ T27] uart uart1: uart1 supply uart not found, using dummy regulator
[ 6.512921][ T27] uart1: ttyAS1 at MMIO 0x5000400 (irq = 43, base_baud = 1500000) is a SUNXI
[ 6.529655][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RE !!
[ 6.529777][ T27] sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pc not found, using dummy regulator
[ 6.562691][ T27] spi spi0: spi0 supply spi not found, using dummy regulator
[ 6.577793][ T27] sunxi_spi_resource_get()2062 - [spi0] SPI MASTER MODE
[ 6.592360][ T27] sunxi_spi_clk_init()2138 - [spi0] mclk 100000000
[ 6.606495][ T148] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 6.628960][ T148] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 6.649889][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RE !!
[ 6.664481][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RE !!
[ 6.678720][ T27] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[ 6.694069][ T27] spi-nor: probe of spi0.0 failed with error -2
[ 6.707717][ T27] sunxi_spi_probe()2541 - [spi0]: driver probe succeed, base ffffffc01011d000, irq 45
[ 6.726313][ T27] sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pa not found, using dummy regulator
[ 6.745043][ T27] sunxi gmac driver's version: 1.0.0
[ 6.757726][ T27] gmac-power0: NULL
[ 6.768535][ T27] gmac-power1: NULL
[ 6.779204][ T27] gmac-power2: NULL
[ 6.791403][ T27] sunxi_ir_startup: get ir protocol failed
[ 6.791596][ T27] Registered IR keymap rc_map_sunxi
[ 6.816809][ T27] rc rc0: sunxi-ir as /devices/platform/soc@3000000/7040000.s_cir/rc/rc0
[ 6.832913][ T33] mmc0: host does not support reading read-only switch, assuming write-enable
[ 6.849583][ T27] rc rc0: lirc_dev: driver sunxi-rc-recv registered at minor = 0, raw IR receiver, no transmitter
[ 6.849900][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RE !!
[ 6.868493][ T27] input: sunxi-ir as /devices/platform/soc@3000000/7040000.s_cir/rc/rc0/input1
[ 6.900435][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RE !!
[ 6.915250][ T148] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 6.934661][ T33] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B
[ 6.957158][ T1] [sound 161][COMMON snd_sunxi_pa_pin_init] pa_pin_0 get failed
[ 6.974477][ T1] debugfs: Directory 'soc@3000000:codec_plat' with parent 'audiocodec' already present!
[ 6.993416][ T33] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B
[ 6.993595][ T1] sunxi-snd-mach soc@3000000:codec_mach: 5096000.codec <-> soc@3000000:codec_plat mapping ok
[ 7.013405][ T33] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B
[ 7.033294][ T1] sunxi-snd-mach soc@3000000:ahub_dam_mach: snd-soc-dummy-dai <-> 5097000.ahub_dam_plat mapping ok
[ 7.052752][ T33] mmc0: new ultra high speed SDR104 SDXC card at address 5048
[ 7.072969][ T1] debugfs: Directory 'soc@3000000:ahub1_plat' with parent 'ahubhdmi' already present!
[ 7.089734][ T33] mmcblk0: mmc0:5048 SD64G 58.0 GiB
[ 7.123094][ T1] sunxi-snd-mach soc@3000000:ahub1_mach: snd-soc-dummy-dai <-> soc@3000000:ahub1_plat mapping ok
[ 7.124095][ T33] mmcblk0: p1
[ 7.144215][ T1] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.174817][ T1] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.191916][ T34] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.211114][ T34] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 7.229435][ T1] sunxi_i2c_do_xfer()1814 - [i2c5] incomplete xfer (status: 0x20, dev addr: 0x10)
[ 7.248519][ T1] of_property_read_string ac200.tv_regulator_name fail
[ 7.264850][ T1] [ac200] get ave_regulator_name failed!
[ 7.280045][ T1] [ac200] pwm enable
[ 7.292929][ T1] ALSA device list:
[ 7.305729][ T1] #0: audiocodec
[ 7.318450][ T1] #1: ahubdam
[ 7.330887][ T1] #2: ahubhdmi
[ 7.345579][ T1] Freeing unused kernel memory: 2944K
[ 7.372645][ T1] Kernel init done
[ 7.385071][ T1] Run /init as init process
[ 9.048104][ T34] cfg80211: failed to load regulatory.db
[ 9.189131][ T191] sunxi-ehci: EHCI SUNXI driver
[ 9.203285][ T192] sunxi-ohci: OHCI SUNXI driver
[ 9.204206][ T191] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffffc009242580, 0x:ffffffc010045000, irq_no:31
[ 9.218341][ T192] [sunxi-ohci0]: probe, pdev->name: 5101400.ohci0-controller, sunxi_ohci: 0xffffffc009242fa0
[ 9.239741][ T191] [sunxi-ehci0]: Not init ehci0
[ 9.240677][ T191] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffffc0092428e0, 0x:ffffffc010145000, irq_no:33
[ 9.259445][ T192] [sunxi-ohci0]: Not init ohci0
[ 9.273161][ T191] hci: sunxi_insmod_ehci()600 WARN: get supply failed
[ 9.296993][ T192] [sunxi-ohci1]: probe, pdev->name: 5200400.ohci1-controller, sunxi_ohci: 0xffffffc009243300
[ 9.309799][ T191] sunxi-ehci 5200000.ehci1-controller: EHCI Host Controller
[ 9.325661][ T192] hci: sunxi_insmod_ohci()265 WARN: get supply failed
[ 9.345494][ T191] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1
[ 9.362092][ T192] sunxi-ohci 5200400.ohci1-controller: OHCI Host Controller
[ 9.378205][ T191] sunxi-ehci 5200000.ehci1-controller: irq 51, io mem 0x05200000
[ 9.397078][ T192] sunxi-ohci 5200400.ohci1-controller: new USB bus registered, assigned bus number 2
[ 9.428641][ T191] sunxi-ehci 5200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[ 9.430677][ T192] sunxi-ohci 5200400.ohci1-controller: irq 52, io mem 0x05200400
[ 9.449754][ T191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 9.501810][ T191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.519212][ T191] usb usb1: Product: EHCI Host Controller
[ 9.533887][ T191] usb usb1: Manufacturer: Linux 5.4.125 ehci_hcd
[ 9.549248][ T191] usb usb1: SerialNumber: sunxi-ehci
[ 9.563979][ T191] hub 1-0:1.0: USB hub found
[ 9.577322][ T191] hub 1-0:1.0: 1 port detected
[ 9.591451][ T192] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 9.592898][ T191] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffffc009242c40, 0x:ffffffc0101c3000, irq_no:35
[ 9.609833][ T192] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.609846][ T192] usb usb2: Product: OHCI Host Controller
[ 9.632786][ T191] hci: sunxi_insmod_ehci()600 WARN: get supply failed
[ 9.650316][ T192] usb usb2: Manufacturer: Linux 5.4.125 ohci_hcd
[ 9.665191][ T191] sunxi-ehci 5310000.ehci2-controller: EHCI Host Controller
[ 9.681191][ T192] usb usb2: SerialNumber: sunxi-ohci
[ 9.728185][ T192] hub 2-0:1.0: USB hub found
[ 9.741686][ T192] hub 2-0:1.0: 1 port detected
[ 9.755695][ T191] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 3
[ 9.759436][ T192] [sunxi-ohci2]: probe, pdev->name: 5310400.ohci2-controller, sunxi_ohci: 0xffffffc0092439c0
[ 9.774762][ T191] sunxi-ehci 5310000.ehci2-controller: irq 53, io mem 0x05310000
[ 9.794296][ T192] hci: sunxi_insmod_ohci()265 WARN: get supply failed
[ 9.826987][ T192] sunxi-ohci 5310400.ohci2-controller: OHCI Host Controller
[ 9.828744][ T191] sunxi-ehci 5310000.ehci2-controller: USB 2.0 started, EHCI 1.00
[ 9.843338][ T192] sunxi-ohci 5310400.ohci2-controller: new USB bus registered, assigned bus number 4
[ 9.860073][ T191] debugfs: Directory 'sunxi-ehci' with parent 'ehci' already present!
[ 9.878707][ T192] debugfs: Directory 'sunxi-ohci' with parent 'ohci' already present!
[ 9.897697][ T191] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 9.912692][ T192] sunxi-ohci 5310400.ohci2-controller: irq 54, io mem 0x05310400
[ 9.930608][ T191] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.963702][ T191] usb usb3: Product: EHCI Host Controller
[ 9.977688][ T191] usb usb3: Manufacturer: Linux 5.4.125 ehci_hcd
[ 9.992264][ T191] usb usb3: SerialNumber: sunxi-ehci
[ 10.006191][ T191] hub 3-0:1.0: USB hub found
[ 10.018792][ T191] hub 3-0:1.0: 1 port detected
[ 10.032169][ T192] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 10.033678][ T191] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffffc009243660, 0x:ffffffc011db7000, irq_no:37
[ 10.049928][ T192] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.071930][ T191] hci: sunxi_insmod_ehci()600 WARN: get supply failed
[ 10.088440][ T192] usb usb4: Product: OHCI Host Controller
[ 10.103510][ T191] sunxi-ehci 5311000.ehci3-controller: EHCI Host Controller
[ 10.117339][ T192] usb usb4: Manufacturer: Linux 5.4.125 ohci_hcd
[ 10.147825][ T192] usb usb4: SerialNumber: sunxi-ohci
[ 10.162011][ T192] hub 4-0:1.0: USB hub found
[ 10.174931][ T192] hub 4-0:1.0: 1 port detected
[ 10.188365][ T191] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 5
[ 10.190102][ T192] [sunxi-ohci3]: probe, pdev->name: 5311400.ohci3-controller, sunxi_ohci: 0xffffffc009243d20
[ 10.206925][ T191] sunxi-ehci 5311000.ehci3-controller: irq 55, io mem 0x05311000
[ 10.226119][ T192] hci: sunxi_insmod_ohci()265 WARN: get supply failed
[ 10.256720][ T191] sunxi-ehci 5311000.ehci3-controller: USB 2.0 started, EHCI 1.00
[ 10.258293][ T192] sunxi-ohci 5311400.ohci3-controller: OHCI Host Controller
[ 10.275030][ T191] debugfs: Directory 'sunxi-ehci' with parent 'ehci' already present!
[ 10.291207][ T192] sunxi-ohci 5311400.ohci3-controller: new USB bus registered, assigned bus number 6
[ 10.309083][ T191] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 10.327128][ T192] debugfs: Directory 'sunxi-ohci' with parent 'ohci' already present!
[ 10.345477][ T191] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.362773][ T192] sunxi-ohci 5311400.ohci3-controller: irq 56, io mem 0x05311400
[ 10.379844][ T191] usb usb5: Product: EHCI Host Controller
[ 10.410839][ T191] usb usb5: Manufacturer: Linux 5.4.125 ehci_hcd
[ 10.425806][ T191] usb usb5: SerialNumber: sunxi-ehci
[ 10.440122][ T191] hub 5-0:1.0: USB hub found
[ 10.453008][ T191] hub 5-0:1.0: 1 port detected
[ 10.466851][ T192] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 10.484908][ T192] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.501836][ T192] usb usb6: Product: OHCI Host Controller
[ 10.516057][ T192] usb usb6: Manufacturer: Linux 5.4.125 ohci_hcd
[ 10.530892][ T192] usb usb6: SerialNumber: sunxi-ohci
[ 10.545194][ T192] hub 6-0:1.0: USB hub found
[ 10.558093][ T192] hub 6-0:1.0: 1 port detected
[ 13.870998][ T239] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[ 14.481734][ T1] systemd[1]: System time before build time, advancing clock.
[ 14.525916][ T1] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 14.570576][ T1] systemd[1]: Detected architecture arm64.
[ 14.621072][ T1] systemd[1]: Set hostname to <orangepizero2w>.
^@^@[ 15.751508][ T1] random: systemd: uninitialized urandom read (16 bytes read)
[ 15.782395][ T1] systemd[1]: Created slice system-modprobe.slice.
[ 15.799727][ T1] random: systemd: uninitialized urandom read (16 bytes read)
[ 15.822989][ T1] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 15.839752][ T1] random: systemd: uninitialized urandom read (16 bytes read)
[ 15.862268][ T1] systemd[1]: Created slice User and Session Slice.
[ 15.879092][ T1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 15.897365][ T1] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 15.920272][ T1] systemd[1]: Reached target User and Group Name Lookups.
[ 15.937100][ T1] systemd[1]: Reached target Remote File Systems.
[ 15.953022][ T1] systemd[1]: Reached target Slices.
[ 15.967502][ T1] systemd[1]: Reached target Swap.
[ 15.981679][ T1] systemd[1]: Reached target System Time Set.
[ 15.999085][ T1] systemd[1]: Listening on Syslog Socket.
[ 16.015597][ T1] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 16.034088][ T1] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 16.056935][ T1] systemd[1]: Listening on Journal Audit Socket.
[ 16.074329][ T1] systemd[1]: Listening on Journal Socket (/dev/log).
[ 16.092625][ T1] systemd[1]: Listening on Journal Socket.
[ 16.109741][ T1] systemd[1]: Listening on udev Control Socket.
[ 16.125363][ T1] systemd[1]: Listening on udev Kernel Socket.
[ 16.159622][ T1] systemd[1]: Mounting Huge Pages File System...
[ 16.193391][ T1] systemd[1]: Mounting POSIX Message Queue File System...
[ 16.228076][ T1] systemd[1]: Mounting Kernel Debug File System...
[ 16.247144][ T1] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 16.283312][ T1] systemd[1]: Starting Restore / save the current clock...
[ 16.317739][ T1] systemd[1]: Starting Set the console keyboard layout...
[ 16.359595][ T1] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 16.396870][ T1] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[ 16.413634][ T1] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 16.447842][ T1] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 16.479911][ T1] systemd[1]: Starting Load Kernel Module pstore_blk...
[ 16.512528][ T1] systemd[1]: Starting Load Kernel Module pstore_zone...
[ 16.528796][ T1] systemd[1]: Condition check resulted in Load Kernel Module ramoops being skipped.
[ 16.564249][ T1] systemd[1]: Started Nameserver information manager.
[ 16.582337][ T1] systemd[1]: Reached target Network (Pre).
[ 16.601303][ T1] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 16.620206][ T1] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 16.662638][ T1] systemd[1]: Starting Load Kernel Modules...
[ 16.695968][ T1] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 16.712700][ T302] sunxi-rfkill soc@3000000:rfkill: module version: v1.0.9
[ 16.728307][ T302] sunxi-rfkill soc@3000000:rfkill: pinctrl_lookup_state(default) failed! return ffffffffffffffed
[ 16.732437][ T1] systemd[1]: Starting udev Coldplug all Devices...
[ 16.747783][ T302] sunxi-rfkill soc@3000000:rfkill: get gpio chip_en failed
[ 16.752465][ T304] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[ 16.794592][ T302] sunxi-rfkill soc@3000000:rfkill: get gpio power_en failed
[ 16.794610][ T302] sunxi-rfkill soc@3000000:rfkill: wlan_busnum (1)
[ 16.824583][ T302] sunxi-rfkill soc@3000000:rfkill: Missing wlan_power.
[ 16.839458][ T302] sunxi-rfkill soc@3000000:rfkill: wlan_regon gpio=210 assert=1
[ 16.855247][ T302] sunxi-rfkill soc@3000000:rfkill: wlan_hostwake gpio=207 assert=1
[ 16.871376][ T302] sunxi-rfkill soc@3000000:rfkill: wakeup source is enabled
[ 16.884868][ T1] systemd[1]: Mounted Huge Pages File System.
[ 16.887130][ T302] sunxi-rfkill soc@3000000:rfkill: Missing bt_power.
[ 16.915404][ T302] sunxi-rfkill soc@3000000:rfkill: bt_rst gpio=211 assert=0
[ 16.937349][ T1] systemd[1]: Mounted POSIX Message Queue File System.
[ 16.956318][ T302] WCN: marlin_init entry!
[ 16.959363][ T1] systemd[1]: Mounted Kernel Debug File System.
[ 16.968999][ T302] WCN: wcn config bt wake host
[ 16.995505][ T302] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 intnum=236
[ 17.011485][ T302] WCN: wcn config wifi wake host
[ 17.024314][ T302] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840
[ 17.047240][ T302] sdiohal:sdiohal_init ok
[ 17.047901][ T1] systemd[1]: Finished Restore / save the current clock.
[ 17.060252][ T302] WCN: marlin_probe ok!
[ 17.116636][ T302] WCN: start_marlin [MARLIN_WIFI]
[ 17.123731][ T1] systemd[1]: Finished Set the console keyboard layout.
[ 17.128893][ T302] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
[ 17.128899][ T302] WCN: the first power on start
[ 17.208493][ T1] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 17.235292][ T1] systemd[1]: modprobe@chromeos_pstore.service: Succeeded.
[ 17.269210][ T1] systemd[1]: Finished Load Kernel Module chromeos_pstore.
[ 17.286758][ T302] sunxi-rfkill soc@3000000:rfkill: wlan power on success
[ 17.293218][ T1] systemd[1]: modprobe@efi_pstore.service: Succeeded.
[ 17.301280][ T302] WCN: marlin chip en pull up
[ 17.328681][ T302] sdiohal:sdiohal_scan_card
[ 17.340070][ T302] sunxi-rfkill soc@3000000:rfkill: bus_index: 1
[ 17.345530][ T1] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 17.353628][ T32] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 17.395092][ T1] systemd[1]: modprobe@pstore_blk.service: Succeeded.
[ 17.396620][ T32] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 17.427632][ T1] systemd[1]: Finished Load Kernel Module pstore_blk.
[ 17.442082][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RE !!
[ 17.458562][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RE !!
[ 17.467031][ T1] systemd[1]: modprobe@pstore_zone.service: Succeeded.
[ 17.473270][ T32] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 17.505544][ T1] systemd[1]: Finished Load Kernel Module pstore_zone.
[ 17.510804][ T32] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 17.544415][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RE !!
[ 17.559856][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RE !!
[ 17.575254][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RE !!
[ 17.590564][ C0] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RE !!
[ 17.605438][ T32] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 17.612860][ T1] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 17.653570][ T1] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 17.674042][ T1] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 17.710768][ T1] systemd[1]: Starting Load/Save Random Seed...
[ 17.746256][ T1] systemd[1]: Starting Create System Users...
[ 17.840867][ T1] systemd[1]: Finished Create System Users.
[ 17.876076][ T1] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 17.983930][ T1] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 18.002134][ T1] systemd[1]: Reached target Local File Systems (Pre).
[ 18.037769][ T1] systemd[1]: Mounting /tmp...
[ 18.071158][ T1] systemd[1]: Starting udev Kernel Device Manager...
[ 18.098914][ T1] systemd[1]: Mounted /tmp.
[ 18.113658][ T1] systemd[1]: Reached target Local File Systems.
[ 18.150324][ T1] systemd[1]: Starting Set console font and keymap...
[ 18.189033][ T1] systemd[1]: Starting Orange Pi ZRAM config...
[ 18.225872][ T1] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 18.243904][ T1] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 18.313765][ T1] systemd[1]: Finished Set console font and keymap.
[ 18.342832][ T1] systemd[1]: plymouth-read-write.service: Succeeded.
[ 18.394852][ T1] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
[ 18.414449][ T1] systemd[1]: Received SIGRTMIN+20 from PID 214 (plymouthd).
[ 18.495890][ T1] systemd[1]: Started udev Kernel Device Manager.
[ 18.656941][ T320] zram0: detected capacity change from 0 to 499486720
[ 19.531661][ T1] systemd[1]: Finished udev Coldplug all Devices.
[ 19.578592][ T1] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 19.617147][ T1] systemd[1]: Starting Show Plymouth Boot Screen...
[ 19.675045][ T1] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 19.732665][ C2] random: crng init done
[ 19.744719][ C2] random: 7 urandom warning(s) missed due to ratelimiting
[ 19.763094][ T1] systemd[1]: plymouth-start.service: Succeeded.
[ 19.764973][ T362] Adding 487776k swap on /dev/zram0. Priority:5 extents:1 across:487776k SS
[ 19.829368][ T366] zram: Added device: zram1
[ 19.831465][ T1] systemd[1]: Started Show Plymouth Boot Screen.
[ 19.921225][ T1] systemd[1]: Finished Load/Save Random Seed.
[ 19.931159][ T320] zram1: detected capacity change from 0 to 52428800
[ 19.936912][ T302] sdiohal err:wait scan card time out
[ 19.971453][ T1] systemd[1]: Found device /dev/ttyAS0.
[ 19.995859][ T1] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[ 20.026855][ T1] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 20.045815][ T1] systemd[1]: Reached target Local Encrypted Volumes.
[ 20.062017][ T1] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[ 20.127147][ T1] systemd[1]: Finished Orange Pi ZRAM config.
[ 20.190148][ T1] systemd[1]: Starting Orange Pi memory supported logging...
[ 20.349677][ T1] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 20.380915][ T1] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 20.392803][ T407] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
[ 20.414126][ T1] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[ 20.415834][ T407] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[ 20.469934][ T1] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 20.478516][ T1] systemd[1]: Condition check resulted in Load Kernel Module pstore_blk being skipped.
[ 20.489701][ T1] systemd[1]: Condition check resulted in Load Kernel Module pstore_zone being skipped.
[ 20.500842][ T1] systemd[1]: Condition check resulted in Load Kernel Module ramoops being skipped.
[ 20.535064][ T1] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 20.574345][ T1] systemd[1]: Starting Show Plymouth Boot Screen...
[ 20.583843][ T1] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 20.595270][ T1] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[ 20.609340][ T1] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 20.621525][ T1] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 20.665977][ T1] systemd[1]: modprobe@chromeos_pstore.service: Succeeded.
[ 20.697470][ T1] systemd[1]: Finished Load Kernel Module chromeos_pstore.
[ 20.718804][ T1] systemd[1]: modprobe@efi_pstore.service: Succeeded.
[ 20.742159][ T335] get det_vbus is fail, -84
[ 20.747213][ T335] get id is fail, -84
[ 20.750228][ T1] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 20.775015][ T1] systemd[1]: plymouth-read-write.service: Succeeded.
[ 20.825447][ T1] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
[ 20.855223][ T1] systemd[1]: Received SIGRTMIN+20 from PID 214 (plymouthd).
[ 20.899640][ T1] systemd[1]: plymouth-start.service: Succeeded.
[ 20.946286][ T1] systemd[1]: Started Show Plymouth Boot Screen.
[ 20.981658][ T1] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 21.001578][ T1] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 21.030850][ T1] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[ 21.057199][ T1] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 21.066095][ T1] systemd[1]: Condition check resulted in Load Kernel Module pstore_blk being skipped.
[ 21.077107][ T1] systemd[1]: Condition check resulted in Load Kernel Module pstore_zone being skipped.
[ 21.088351][ T1] systemd[1]: Condition check resulted in Load Kernel Module ramoops being skipped.
[ 21.123068][ T1] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 21.155590][ T1] systemd[1]: Starting Show Plymouth Boot Screen...
[ 21.165335][ T1] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 21.176814][ T1] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[ 21.190059][ T1] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 21.201581][ T1] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[ 21.227677][ T1] systemd[1]: modprobe@chromeos_pstore.service: Succeeded.
[ 21.256407][ T1] systemd[1]: Finished Load Kernel Module chromeos_pstore.
[ 21.274628][ T1] systemd[1]: modprobe@efi_pstore.service: Succeeded.
[ 21.302286][ T1] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 21.322597][ T1] systemd[1]: plymouth-read-write.service: Succeeded.
[ 21.364457][ T1] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
[ 21.391310][ T1] systemd[1]: Received SIGRTMIN+20 from PID 214 (plymouthd).
[ 21.415925][ T1] systemd[1]: plymouth-start.service: Succeeded.
[ 21.458130][ T1] systemd[1]: Started Show Plymouth Boot Screen.
[ 21.565331][ T1] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[ 21.583004][ T1] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 21.595466][ T1] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 21.629335][ T1] systemd[1]: Starting Load/Save RF Kill Switch Status...
[ 21.679109][ T475] sunxi-rfkill soc@3000000:rfkill: set block: 0
[ 21.696055][ T475] sunxi-rfkill soc@3000000:rfkill: bt power on success
[ 21.715933][ T1] systemd[1]: Started Load/Save RF Kill Switch Status.
[ 21.792835][ T425]
[ 21.792835][ T425] insmod_device_driver
[ 21.792835][ T425]
[ 21.802335][ T425] device_chose finished 142!
[ 23.008694][ T302] WCN_ERR: wait SDIO rescan card time out
[ 23.015002][ T302] WCN_ERR: chip power on fail
[ 23.020109][ T302] sdiohal:sdiohal_runtime_put entry
[ 23.025795][ T302] sdiohal err:sdiohal_runtime_put line 1754 not have card
[ 23.046454][ T306] sdiohal err:sdiohal_tx_thread line 152 not have card
[ 24.726156][ T1] systemd[1]: Finished Orange Pi memory supported logging.
[ 24.772388][ T1] systemd[1]: Starting Journal Service...
[ 25.101912][ T1] systemd[1]: Started Journal Service.
[ 25.623664][ T689] systemd-journald[689]: Received client request to flush runtime journal.
[ 38.288652][ T302] unisoc_wifi: probe of unisoc_wifi failed with error -1
[ 38.307316][ T302] mtty_probe init device addr: 0x0000000098e64603
[ 38.314782][ T302] -->rfkill_bluetooth_init
[ 38.319968][ T302] <--rfkill_bluetooth_init
[ 38.463032][ T704] bluetooth_set_power: start_block=0
[ 38.468867][ T704] WCN: start_marlin [MARLIN_BLUETOOTH]
[ 38.474935][ T704] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 1
[ 38.483409][ T704] WCN: no module to power on, start to power on
[ 50.256300][ T802] Unable to handle kernel access to user memory outside uaccess routines at virtual address 00000000000003fd
[ 50.269223][ T802] Mem abort info:
[ 50.273176][ T802] ESR = 0x96000005
[ 50.277438][ T802] EC = 0x25: DABT (current EL), IL = 32 bits
[ 50.284249][ T802] SET = 0, FnV = 0
[ 50.288511][ T802] EA = 0, S1PTW = 0
[ 50.292889][ T802] Data abort info:
[ 50.296966][ T802] ISV = 0, ISS = 0x00000005
[ 50.302117][ T802] CM = 0, WnR = 0
[ 50.306296][ T802] user pgtable: 4k pages, 39-bit VAs, pgdp=000000007b8d1000
[ 50.314433][ T802] [00000000000003fd] pgd=0000000000000000, pud=0000000000000000
[ 50.322959][ T802] Internal error: Oops: 96000005 [#1] SMP
[ 50.329245][ T802] Modules linked in: sprdbt_tty crct10dif_ce ghash_ce sha1_ce sunxi_usbc leds_gpio sprdwl_ng uwe5622_bsp_sdio sunxi_rfkill pstore_blk pstore_zone o
hci_sunxi ehci_sunxi sunxi_hci
[ 50.348856][ T802] CPU: 3 PID: 802 Comm: NetworkManager Not tainted 5.4.125 #1.0.0
[ 50.357484][ T802] Hardware name: Orange Pi Zero2w (DT)
[ 50.363486][ T802] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 50.369692][ T802] pc : geth_phy_init+0x134/0x460
[ 50.375105][ T802] lr : geth_phy_init+0x12c/0x460
[ 50.380519][ T802] sp : ffffffc011f1b2d0
[ 50.385047][ T802] x29: ffffffc011f1b2d0 x28: ffffffc011f1b7b0
[ 50.391819][ T802] x27: ffffff803c853000 x26: 0000000000000000
[ 50.398581][ T802] x25: 000000000000ffff x24: ffffff803c853000
[ 50.405336][ T802] x23: 0000000000441400 x22: 000000004f51e91b
[ 50.412093][ T802] x21: ffffff803c853a00 x20: 0000000000000000
[ 50.418852][ T802] x19: ffffff8038b14000 x18: ffffffc011b37be0
[ 50.425610][ T802] x17: 0000000000000000 x16: 0000000000000000
[ 50.432366][ T802] x15: ffffffc011ca559a x14: 0000000000000000
[ 50.439124][ T802] x13: ffffffc011ca4000 x12: ffffffc011b37000
[ 50.445882][ T802] x11: 0000000000000000 x10: 0000000000000003
[ 50.452636][ T802] x9 : 000000000000032c x8 : ffffffc011f1b278
[ 50.459394][ T802] x7 : ffffffffffffffff x6 : 0000000000000001
[ 50.466150][ T802] x5 : 0000000000000000 x4 : 0000000000000000
[ 50.472907][ T802] x3 : 0000000000000000 x2 : ffffffffffffffed
[ 50.479664][ T802] x1 : 0000000000000000 x0 : ffffffffffffffed
[ 50.486421][ T802] Call trace:
[ 50.489958][ T802] geth_phy_init+0x134/0x460
[ 50.494958][ T802] geth_open+0xac/0x54c
[ 50.499471][ T802] __dev_open+0x10c/0x23c
[ 50.504178][ T802] __dev_change_flags+0x218/0x2b0
[ 50.509684][ T802] dev_change_flags+0x20/0x60
[ 50.514798][ T802] do_setlink+0x1d8/0xc10
[ 50.519508][ T802] __rtnl_newlink+0x4f8/0x774
[ 50.524604][ T802] rtnl_newlink+0x48/0x70
[ 50.529310][ T802] rtnetlink_rcv_msg+0x294/0x330
[ 50.534722][ T802] netlink_rcv_skb+0x58/0x120
[ 50.539826][ T802] rtnetlink_rcv+0x14/0x20
[ 50.544645][ T802] netlink_unicast+0x1ec/0x240
[ 50.549845][ T802] netlink_sendmsg+0x1b4/0x35c
[ 50.555042][ T802] sock_sendmsg+0x4c/0x60
[ 50.559765][ T802] ____sys_sendmsg+0x26c/0x2b0
[ 50.564981][ T802] ___sys_sendmsg+0x7c/0xd4
[ 50.569886][ T802] __sys_sendmsg+0x64/0xc0
[ 50.574689][ T802] __arm64_sys_sendmsg+0x20/0x30
[ 50.580084][ T802] el0_svc_common.constprop.0+0x68/0x160
[ 50.586258][ T802] el0_svc_handler+0x24/0x90
[ 50.591257][ T802] el0_svc+0x8/0xc
[ 50.595284][ T802] Code: aa1303e0 97ffa477 aa0003e2 b4fffdc0 (b9441001)
[ 50.602922][ T802] ---[ end trace f564163424919422 ]---
^@
orangepizero2w login: orangepi (automatic login)
[ 59.915549][ T1890] mtty_close device success !
[ 62.985891][ T776] sunxi-rfkill soc@3000000:rfkill: set block: 1
[ 62.992838][ T776] sunxi-rfkill soc@3000000:rfkill: bt power off success
[ 63.000841][ T776] bluetooth_set_power: start_block=1
[ 63.006755][ T776] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0
[ 63.015298][ T776] bluetooth_set_power: end_block=1
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Kernel 6.8.0 with AXP717 patches from apritzel