minimega woes

gistfile1.txt

Created kernel and initrd images using the following:

$ cd /opt/minimega && ./bin/vmbetter -branch unstable -level debug misc/vmbetter_configs/miniccc.conf
$ mv /opt/minimega/miniccc.* /root/

Configured a VM as follows:

minimega$ vm config
minibuntu: Current VM configuration:
Memory:        2048
VCPUS:         1
Migrate Path:  
Disk Paths:    []
CDROM Path:    
Kernel Path:   /root/miniccc.kernel
Initrd Path:   /root/miniccc.initrd
Kernel Append: parent=10.0.0.1 port=9999 
QEMU Path:     /usr/bin/kvm
QEMU Append:   []
Snapshot:      true
Networks:      [mega_bridge,100 mega_bridge,101]
UUID:

Setup a tap and dnsmasq:

minimega$ tap
host      | bridge      | tap        | vlan | option
minibuntu | mega_bridge | mega_tap0  | 100  | 10.0.0.1/24
minibuntu | mega_bridge | mega_tap12 | 101  | 10.0.1.1/24

minimega$ dnsmasq
host      | ID | Listening Address | Min      | Max        | Path                            | PID
minibuntu | 0  | 10.0.0.1          | 10.0.0.2 | 10.0.0.254 | /tmp/minimega/dnsmasq_521902826 | 29029
minibuntu | 2  | 10.0.1.1          | 10.0.1.2 | 10.0.1.254 | /tmp/minimega/dnsmasq_582718380 | 25766

Started VM:

minimega$ vm launch foo
minimega$ vm start foo
minimega$ vm info
host      | id | name | state   | memory | vcpus | migrate | disk | snapshot | initrd               | kernel               | cdrom | append                     | bridge                    | tap                     | bandwidth         | mac                                   | ip  | ip6 | vlan      | uuid                                 | cc_active | tags
minibuntu | 7  | foo  | RUNNING | 2048   | 1     |         | []   | true     | /root/miniccc.initrd | /root/miniccc.kernel |       | parent=10.0.0.1 port=9999  | [mega_bridge mega_bridge] | [mega_tap13 mega_tap14] | [0.0/0.0 0.0/0.0] | [00:12:84:a1:71:5a 00:32:e5:fc:66:37] | [ ] | [ ] | [100 101] | 3aae6af3-043c-4f32-8c12-2ad6ed4f88c5 | false     | map[]

Notice no IP address assigned to either interface... when I look at the terminal for this VM via
the minimega web interface, it mentions 'Cannot find device "eth1"'. I suspect it mentions the
same thing about eth0, but I can't confirm since I cannot scroll up. When I run `ip addr` via the
web VNC terminal, it only lists the loopback interface. Running `ifconfig eth0 up` results in a
'No such device' error.