Created
October 27, 2022 02:49
-
-
Save adam900710/4b90ba2176db62cd2c6580aa8513522a to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| DDR Version V1.08 20220617 | |
| LPDDR4X, 2112MHz | |
| channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| Manufacturer ID:0x6 | |
| CH0 RX Vref:29.7%, TX Vref:24.8%,23.8% | |
| CH1 RX Vref:28.7%, TX Vref:26.8%,26.8% | |
| CH2 RX Vref:28.7%, TX Vref:26.8%,25.8% | |
| CH3 RX Vref:29.7%, TX Vref:25.8%,26.8% | |
| change to F1: 528MHz | |
| change to F2: 1068MHz | |
| change to F3: 1560MHz | |
| change to F0: 2112MHz | |
| out | |
| U-Boot SPL board init | |
| U-Boot SPL 2017.09-g3caf61a44c2-220414 #stephen (Sep 29 2022 - 18:14:19) | |
| Trying to boot from MMC2 | |
| MMC: no card present | |
| mmc_init: -123, time 0 | |
| spl: mmc init failed with error: -123 | |
| Trying to boot from MMC1 | |
| Card did not respond to voltage select! | |
| mmc_init: -95, time 14 | |
| spl: mmc init failed with error: -95 | |
| Trying to boot from MTD2 | |
| Trying fit image at 0x4000 sector | |
| ## Verified-boot: 0 | |
| ## Checking atf-1 0x00040000 ... sha256(806278dba1...) + OK | |
| ## Checking uboot 0x00200000 ... sha256(6a08776395...) + OK | |
| ## Checking fdt 0x0030a010 ... sha256(d32827d3ac...) + OK | |
| ## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK | |
| ## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK | |
| ## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK | |
| Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) | |
| Total: 498.26 ms | |
| INFO: Preloader serial: 2 | |
| NOTICE: BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang | |
| NOTICE: BL31: Built : 11:23:47, Aug 15 2022 | |
| INFO: spec: 0x1 | |
| INFO: ext 32k is not valid | |
| INFO: GICv3 without legacy support detected. | |
| INFO: ARM GICv3 driver initialized in EL3 | |
| INFO: system boots from cpu-hwid-0 | |
| INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 | |
| INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz | |
| INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz | |
| INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz | |
| INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz | |
| INFO: BL31: Initialising Exception Handling Framework | |
| INFO: BL31: Initializing runtime services | |
| WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK | |
| ERROR: Error initializing runtime service opteed_fast | |
| INFO: BL31: Preparing for EL3 exit to normal world | |
| INFO: Entry point address = 0x200000 | |
| INFO: SPSR = 0x3c9 | |
| U-Boot 2017.09-g3caf61a44c2-220414 #stephen (Sep 29 2022 - 18:14:19 +0800) | |
| Model: Radxa ROCK 5B | |
| PreSerial: 2, raw, 0xfeb50000 | |
| DRAM: 15.7 GiB | |
| Sysmem: init | |
| Relocation Offset: edb6d000 | |
| Relocation fdt: eb9f9cd8 - eb9fecc8 | |
| CR: M/C/I | |
| Using default environment | |
| SF: Detected sfc_nor with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
| Bootdev(atags): mtd 2 | |
| PartType: EFI | |
| DM: v2 | |
| No misc partition | |
| boot mode: None | |
| FIT: No boot partition | |
| No resource partition | |
| No resource partition | |
| No resource partition | |
| Failed to load DTB, ret=-19 | |
| No find valid DTB, ret=-22 | |
| Failed to get kernel dtb, ret=-22 | |
| Model: Radxa ROCK 5B | |
| CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) | |
| b0pll 24000 KHz | |
| b1pll 24000 KHz | |
| lpll 24000 KHz | |
| v0pll 24000 KHz | |
| aupll 24000 KHz | |
| cpll 1500000 KHz | |
| gpll 1188000 KHz | |
| npll 24000 KHz | |
| ppll 1100000 KHz | |
| aclk_center_root 702000 KHz | |
| pclk_center_root 100000 KHz | |
| hclk_center_root 396000 KHz | |
| aclk_center_low_root 500000 KHz | |
| aclk_top_root 750000 KHz | |
| pclk_top_root 100000 KHz | |
| aclk_low_top_root 396000 KHz | |
| No misc partition | |
| Net: No ethernet found. | |
| Hit key to stop autoboot('CTRL+C'): 0 | |
| invalid flags type! | |
| Device 0: Vendor: 0x1d97 Rev: V1.16.2 Prod: MC33402003757 | |
| Type: Hard Disk | |
| Capacity: 488386.3 MB = 476.9 GB (1000215216 x 512) | |
| ... is now current device | |
| Scanning nvme 0:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| reading /extlinux/extlinux.conf | |
| 360 bytes read in 0 ms | |
| select kernel | |
| 1: custom | |
| Enter choice: DDR Version V1.08 20220617 | |
| LPDDR4X, 2112MHz | |
| channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| Manufacturer ID:0x6 | |
| CH0 RX Vref:30.7%, TX Vref:24.8%,23.8% | |
| CH1 RX Vref:28.7%, TX Vref:26.8%,26.8% | |
| CH2 RX Vref:28.7%, TX Vref:26.8%,26.8% | |
| CH3 RX Vref:29.7%, TX Vref:25.8%,26.8% | |
| change to F1: 528MHz | |
| change to F2: 1068MHz | |
| change to F3: 1560MHz | |
| change to F0: 2112MHz | |
| out | |
| U-Boot SPL board init | |
| U-Boot SPL 2017.09-g3caf61a44c2-220414 #stephen (Sep 29 2022 - 18:14:19) | |
| Trying to boot from MMC2 | |
| MMC: no card present | |
| mmc_init: -123, time 0 | |
| spl: mmc init failed with error: -123 | |
| Trying to boot from MMC1 | |
| Card did not respond to voltage select! | |
| mmc_init: -95, time 14 | |
| spl: mmc init failed with error: -95 | |
| Trying to boot from MTD2 | |
| Trying fit image at 0x4000 sector | |
| ## Verified-boot: 0 | |
| ## Checking atf-1 0x00040000 ... sha256(806278dba1...) + OK | |
| ## Checking uboot 0x00200000 ... sha256(6a08776395...) + OK | |
| ## Checking fdt 0x0030a010 ... sha256(d32827d3ac...) + OK | |
| ## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK | |
| ## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK | |
| ## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK | |
| Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) | |
| Total: 498.213 ms | |
| INFO: Preloader serial: 2 | |
| NOTICE: BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang | |
| NOTICE: BL31: Built : 11:23:47, Aug 15 2022 | |
| INFO: spec: 0x1 | |
| INFO: ext 32k is not valid | |
| INFO: GICv3 without legacy support detected. | |
| INFO: ARM GICv3 driver initialized in EL3 | |
| INFO: system boots from cpu-hwid-0 | |
| INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 | |
| INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz | |
| INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz | |
| INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz | |
| INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz | |
| INFO: BL31: Initialising Exception Handling Framework | |
| INFO: BL31: Initializing runtime services | |
| WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK | |
| ERROR: Error initializing runtime service opteed_fast | |
| INFO: BL31: Preparing for EL3 exit to normal world | |
| INFO: Entry point address = 0x200000 | |
| INFO: SPSR = 0x3c9 | |
| U-Boot 2017.09-g3caf61a44c2-220414 #stephen (Sep 29 2022 - 18:14:19 +0800) | |
| Model: Radxa ROCK 5B | |
| PreSerial: 2, raw, 0xfeb50000 | |
| DRAM: 15.7 GiB | |
| Sysmem: init | |
| Relocation Offset: edb6d000 | |
| Relocation fdt: eb9f9cd8 - eb9fecc8 | |
| CR: M/C/I | |
| Using default environment | |
| SF: Detected sfc_nor with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
| Bootdev(atags): mtd 2 | |
| PartType: EFI | |
| DM: v2 | |
| No misc partition | |
| boot mode: None | |
| FIT: No boot partition | |
| No resource partition | |
| No resource partition | |
| No resource partition | |
| Failed to load DTB, ret=-19 | |
| No find valid DTB, ret=-22 | |
| Failed to get kernel dtb, ret=-22 | |
| Model: Radxa ROCK 5B | |
| CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) | |
| b0pll 24000 KHz | |
| b1pll 24000 KHz | |
| lpll 24000 KHz | |
| v0pll 24000 KHz | |
| aupll 24000 KHz | |
| cpll 1500000 KHz | |
| gpll 1188000 KHz | |
| npll 24000 KHz | |
| ppll 1100000 KHz | |
| aclk_center_root 702000 KHz | |
| pclk_center_root 100000 KHz | |
| hclk_center_root 396000 KHz | |
| aclk_center_low_root 500000 KHz | |
| aclk_top_root 750000 KHz | |
| pclk_top_root 100000 KHz | |
| aclk_low_top_root 396000 KHz | |
| No misc partition | |
| Net: No ethernet found. | |
| Hit key to stop autoboot('CTRL+C'): 0 | |
| invalid flags type! | |
| Device 0: Vendor: 0x1d97 Rev: V1.16.2 Prod: MC33402003757 | |
| Type: Hard Disk | |
| Capacity: 488386.3 MB = 476.9 GB (1000215216 x 512) | |
| ... is now current device | |
| Scanning nvme 0:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| reading /extlinux/extlinux.conf | |
| 360 bytes read in 0 ms | |
| select kernel | |
| 1: custom | |
| Enter choice: 1 | |
| 1: custom | |
| Retrieving file: /initramfs-custom.img | |
| reading /initramfs-custom.img | |
| 20418398 bytes read in 22 ms (885.1 MiB/s) | |
| Retrieving file: /Image-custom | |
| reading /Image-custom | |
| 29766144 bytes read in 32 ms (887.1 MiB/s) | |
| append: root=/dev/arm_nvme/root earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 console=tty1 loglevel=7 rootwait rw irqchip.gicv3_pseudo_nmi=0 switolb=1 | |
| Retrieving file: /dtbs-custom/rockchip/rk3588-rock-5b.dtb | |
| reading /dtbs-custom/rockchip/rk3588-rock-5b.dtb | |
| 251760 bytes read in 2 ms (120 MiB/s) | |
| Retrieving file: /boot/dtbs-custom/rockchip/overlay/rk3588-uart7-m2.dtbo | |
| ** Unable to read file /boot/dtbs-custom/rockchip/overlay/rk3588-uart7-m2.dtbo ** | |
| Failed loading overlay /boot/dtbs-custom/rockchip/overlay/rk3588-uart7-m2.dtbo | |
| Fdt Ramdisk skip relocation | |
| No misc partition | |
| ## Flattened Device Tree blob at 0x0a100000 | |
| Booting using the fdt blob at 0x0a100000 | |
| 'reserved-memory' cma: addr=10000000 size=10000000 | |
| Using Device Tree in place at 000000000a100000, end 000000000a14076f | |
| Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000) | |
| Adding bank: 0x100000000 - 0x3fc000000 (size: 0x2fc000000) | |
| Adding bank: 0x3fc500000 - 0x3fff00000 (size: 0x03a00000) | |
| Total: 2299.957 ms | |
| Starting kernel ... | |
| [ 2.318429] Booting Linux on physical CPU 0x0000000000 [0x412fd050] | |
| [ 2.318452] Linux version 5.10.66-custom+ (adam@rock5b) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP Wed Oct 26 07:41:27 UTC 2022 | |
| [ 2.329108] Machine model: Radxa ROCK 5B | |
| [ 2.329147] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '') | |
| [ 2.331836] printk: bootconsole [uart8250] enabled | |
| [ 2.332357] efi: UEFI not found. | |
| [ 2.336239] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB | |
| [ 2.337312] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB | |
| [ 2.338462] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB | |
| [ 2.339205] OF: reserved mem: initialized node cma, compatible id shared-dma-pool | |
| [ 2.641335] Zone ranges: | |
| [ 2.641581] DMA [mem 0x0000000000200000-0x00000000ffffffff] | |
| [ 2.642155] DMA32 empty | |
| [ 2.642425] Normal [mem 0x0000000100000000-0x00000003ffefffff] | |
| [ 2.642996] Movable zone start for each node | |
| [ 2.643389] Early memory node ranges | |
| [ 2.643720] node 0: [mem 0x0000000000200000-0x00000000efffffff] | |
| [ 2.644298] node 0: [mem 0x0000000100000000-0x00000003fbffffff] | |
| [ 2.644878] node 0: [mem 0x00000003fc500000-0x00000003ffefffff] | |
| [ 2.645456] Initmem setup node 0 [mem 0x0000000000200000-0x00000003ffefffff] | |
| [ 2.754001] On node 0, zone Normal: 256 pages in unavailable ranges | |
| [ 2.754173] psci: probing for conduit method from DT. | |
| [ 2.755220] psci: PSCIv1.1 detected in firmware. | |
| [ 2.755646] psci: Using standard PSCI v0.2 function IDs | |
| [ 2.756129] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 2.756572] psci: SMC Calling Convention v1.2 | |
| [ 2.757363] percpu: Embedded 31 pages/cpu s88680 r8192 d30104 u126976 | |
| [ 2.758173] Detected VIPT I-cache on CPU0 | |
| [ 2.758586] CPU features: detected: GIC system register CPU interface | |
| [ 2.759180] CPU features: detected: Virtualization Host Extensions | |
| [ 2.759754] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 2.760399] alternatives: patching kernel code | |
| [ 2.761141] Built 1 zonelists, mobility grouping on. Total pages: 4062220 | |
| [ 2.761777] Kernel command line: root=/dev/arm_nvme/root earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 console=tty1 loglevel=7 rootwait rw irqchip.gicv3_pseudo_nmi=0 switolb=1 | |
| [ 2.765028] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) | |
| [ 2.766511] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 2.767241] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 2.773867] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB) | |
| [ 2.919849] Memory: 15811896K/16506880K available (14144K kernel code, 3084K rwdata, 5636K rodata, 6080K init, 519K bss, 432840K reserved, 262144K cma-reserved) | |
| [ 2.921302] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 | |
| [ 2.921933] ftrace: allocating 55178 entries in 216 pages | |
| [ 3.009827] ftrace: allocated 216 pages with 4 groups | |
| [ 3.010576] rcu: Hierarchical RCU implementation. | |
| [ 3.011013] rcu: RCU event tracing is enabled. | |
| [ 3.011431] Rude variant of Tasks RCU enabled. | |
| [ 3.011850] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. | |
| [ 3.017423] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 3.021005] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 3.021489] GICv3: 480 SPIs implemented | |
| [ 3.021844] GICv3: 0 Extended SPIs implemented | |
| [ 3.022279] GICv3: Distributor has no Range Selector support | |
| [ 3.022806] GICv3: 16 PPIs implemented | |
| [ 3.023193] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 | |
| [ 3.023947] ITS [mem 0xfe640000-0xfe65ffff] | |
| [ 3.024379] ITS@0x00000000fe640000: allocated 8192 Devices @1001a0000 (indirect, esz 8, psz 64K, shr 0) | |
| [ 3.025262] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001b0000 (flat, esz 2, psz 64K, shr 0) | |
| [ 3.026214] ITS: using cache flushing for cmd queue | |
| [ 3.026698] ITS [mem 0xfe660000-0xfe67ffff] | |
| [ 3.027124] ITS@0x00000000fe660000: allocated 8192 Devices @1001d0000 (indirect, esz 8, psz 64K, shr 0) | |
| [ 3.028006] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @1001e0000 (flat, esz 2, psz 64K, shr 0) | |
| [ 3.028958] ITS: using cache flushing for cmd queue | |
| [ 3.029671] GICv3: using LPI property table @0x00000001001f0000 | |
| [ 3.030328] GIC: using cache flushing for LPI property table | |
| [ 3.030853] GICv3: CPU0: using allocated LPI pending table @0x0000000100200000 | |
| [ 3.031677] random: get_random_bytes called from start_kernel+0x3d8/0x5cc with crng_init=0 | |
| [ 3.158028] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 3.159333] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 3.160314] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 3.162551] Console: colour dummy device 80x25 | |
| [ 3.162962] printk: console [tty1] enabled | |
| [ 3.163343] printk: bootconsole [uart8250] disabled | |
| [ 2.318429] Booting Linux on physical CPU 0x0000000000 [0x412fd050] | |
| [ 2.318452] Linux version 5.10.66-custom+ (adam@rock5b) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP Wed Oct 26 07:41:27 UTC 2022 | |
| [ 2.329108] Machine model: Radxa ROCK 5B | |
| [ 2.329147] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '') | |
| [ 2.331836] printk: bootconsole [uart8250] enabled | |
| [ 2.332357] efi: UEFI not found. | |
| [ 2.336239] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB | |
| [ 2.337312] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB | |
| [ 2.338462] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB | |
| [ 2.339205] OF: reserved mem: initialized node cma, compatible id shared-dma-pool | |
| [ 2.641335] Zone ranges: | |
| [ 2.641581] DMA [mem 0x0000000000200000-0x00000000ffffffff] | |
| [ 2.642155] DMA32 empty | |
| [ 2.642425] Normal [mem 0x0000000100000000-0x00000003ffefffff] | |
| [ 2.642996] Movable zone start for each node | |
| [ 2.643389] Early memory node ranges | |
| [ 2.643720] node 0: [mem 0x0000000000200000-0x00000000efffffff] | |
| [ 2.644298] node 0: [mem 0x0000000100000000-0x00000003fbffffff] | |
| [ 2.644878] node 0: [mem 0x00000003fc500000-0x00000003ffefffff] | |
| [ 2.645456] Initmem setup node 0 [mem 0x0000000000200000-0x00000003ffefffff] | |
| [ 2.754001] On node 0, zone Normal: 256 pages in unavailable ranges | |
| [ 2.754173] psci: probing for conduit method from DT. | |
| [ 2.755220] psci: PSCIv1.1 detected in firmware. | |
| [ 2.755646] psci: Using standard PSCI v0.2 function IDs | |
| [ 2.756129] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 2.756572] psci: SMC Calling Convention v1.2 | |
| [ 2.757363] percpu: Embedded 31 pages/cpu s88680 r8192 d30104 u126976 | |
| [ 2.758173] Detected VIPT I-cache on CPU0 | |
| [ 2.758586] CPU features: detected: GIC system register CPU interface | |
| [ 2.759180] CPU features: detected: Virtualization Host Extensions | |
| [ 2.759754] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 2.760399] alternatives: patching kernel code | |
| [ 2.761141] Built 1 zonelists, mobility grouping on. Total pages: 4062220 | |
| [ 2.761777] Kernel command line: root=/dev/arm_nvme/root earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 console=tty1 loglevel=7 rootwait rw irqchip.gicv3_pseudo_nmi=0 switolb=1 | |
| [ 2.765028] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) | |
| [ 2.766511] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 2.767241] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 2.773867] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB) | |
| [ 2.919849] Memory: 15811896K/16506880K available (14144K kernel code, 3084K rwdata, 5636K rodata, 6080K init, 519K bss, 432840K reserved, 262144K cma-reserved) | |
| [ 2.921302] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 | |
| [ 2.921933] ftrace: allocating 55178 entries in 216 pages | |
| [ 3.009827] ftrace: allocated 216 pages with 4 groups | |
| [ 3.010576] rcu: Hierarchical RCU implementation. | |
| [ 3.011013] rcu: RCU event tracing is enabled. | |
| [ 3.011431] Rude variant of Tasks RCU enabled. | |
| [ 3.011850] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. | |
| [ 3.017423] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 3.021005] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 3.021489] GICv3: 480 SPIs implemented | |
| [ 3.021844] GICv3: 0 Extended SPIs implemented | |
| [ 3.022279] GICv3: Distributor has no Range Selector support | |
| [ 3.022806] GICv3: 16 PPIs implemented | |
| [ 3.023193] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 | |
| [ 3.023947] ITS [mem 0xfe640000-0xfe65ffff] | |
| [ 3.024379] ITS@0x00000000fe640000: allocated 8192 Devices @1001a0000 (indirect, esz 8, psz 64K, shr 0) | |
| [ 3.025262] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001b0000 (flat, esz 2, psz 64K, shr 0) | |
| [ 3.026214] ITS: using cache flushing for cmd queue | |
| [ 3.026698] ITS [mem 0xfe660000-0xfe67ffff] | |
| [ 3.027124] ITS@0x00000000fe660000: allocated 8192 Devices @1001d0000 (indirect, esz 8, psz 64K, shr 0) | |
| [ 3.028006] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @1001e0000 (flat, esz 2, psz 64K, shr 0) | |
| [ 3.028958] ITS: using cache flushing for cmd queue | |
| [ 3.029671] GICv3: using LPI property table @0x00000001001f0000 | |
| [ 3.030328] GIC: using cache flushing for LPI property table | |
| [ 3.030853] GICv3: CPU0: using allocated LPI pending table @0x0000000100200000 | |
| [ 3.031677] random: get_random_bytes called from start_kernel+0x3d8/0x5cc with crng_init=0 | |
| [ 3.158028] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 3.159333] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 3.160314] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 3.162551] Console: colour dummy device 80x25 | |
| [ 3.162962] printk: console [tty1] enabled | |
| [ 3.163343] printk: bootconsole [uart8250] disabled | |
| [ 3.163818] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) | |
| [ 3.163841] pid_max: default: 32768 minimum: 301 | |
| [ 3.164009] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 3.164053] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 3.165778] rcu: Hierarchical SRCU implementation. | |
| [ 3.166590] Platform MSI: msi-controller@fe640000 domain created | |
| [ 3.166619] Platform MSI: msi-controller@fe660000 domain created | |
| [ 3.167033] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created | |
| [ 3.167067] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created | |
| [ 3.167303] EFI services will not be available. | |
| [ 3.167646] smp: Bringing up secondary CPUs ... | |
| [ 3.168189] Detected VIPT I-cache on CPU1 | |
| [ 3.168224] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000 | |
| [ 3.168241] GICv3: CPU1: using allocated LPI pending table @0x0000000100210000 | |
| [ 3.168284] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] | |
| [ 3.168889] Detected VIPT I-cache on CPU2 | |
| [ 3.168918] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000 | |
| [ 3.168934] GICv3: CPU2: using allocated LPI pending table @0x0000000100220000 | |
| [ 3.168973] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] | |
| [ 3.169589] Detected VIPT I-cache on CPU3 | |
| [ 3.169616] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000 | |
| [ 3.169631] GICv3: CPU3: using allocated LPI pending table @0x0000000100230000 | |
| [ 3.169668] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] | |
| [ 3.170249] CPU features: detected: Spectre-v4 | |
| [ 3.170252] Detected PIPT I-cache on CPU4 | |
| [ 3.170267] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000 | |
| [ 3.170275] GICv3: CPU4: using allocated LPI pending table @0x0000000100240000 | |
| [ 3.170299] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0] | |
| [ 3.170821] Detected PIPT I-cache on CPU5 | |
| [ 3.170837] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000 | |
| [ 3.170846] GICv3: CPU5: using allocated LPI pending table @0x0000000100250000 | |
| [ 3.170869] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0] | |
| [ 3.171418] Detected PIPT I-cache on CPU6 | |
| [ 3.171432] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000 | |
| [ 3.171441] GICv3: CPU6: using allocated LPI pending table @0x0000000100260000 | |
| [ 3.171464] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0] | |
| [ 3.171992] Detected PIPT I-cache on CPU7 | |
| [ 3.172007] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000 | |
| [ 3.172016] GICv3: CPU7: using allocated LPI pending table @0x0000000100270000 | |
| [ 3.172040] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0] | |
| [ 3.172106] smp: Brought up 1 node, 8 CPUs | |
| [ 3.172391] SMP: Total of 8 processors activated. | |
| [ 3.172405] CPU features: detected: Privileged Access Never | |
| [ 3.172417] CPU features: detected: User Access Override | |
| [ 3.172431] CPU features: detected: 32-bit EL0 Support | |
| [ 3.172443] CPU features: detected: Common not Private translations | |
| [ 3.172457] CPU features: detected: RAS Extension Support | |
| [ 3.172470] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| [ 3.172486] CPU features: detected: CRC32 instructions | |
| [ 3.172499] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 3.172515] CPU features: detected: RCpc load-acquire (LDAPR) | |
| [ 3.172609] CPU: All CPU(s) started at EL2 | |
| [ 3.175755] devtmpfs: initialized | |
| [ 3.189840] Registered cp15_barrier emulation handler | |
| [ 3.189852] Registered setend emulation handler | |
| [ 3.189931] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns | |
| [ 3.189943] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) | |
| [ 3.192586] pinctrl core: initialized pinctrl subsystem | |
| [ 3.192854] DMI not present or invalid. | |
| [ 3.192972] NET: Registered protocol family 16 | |
| [ 3.193762] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations | |
| [ 3.193927] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 3.194522] thermal_sys: Registered thermal governor 'fair_share' | |
| [ 3.194525] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 3.194531] thermal_sys: Registered thermal governor 'user_space' | |
| [ 3.194536] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 3.194682] thermal thermal_zone1: power_allocator: sustainable_power will be estimated | |
| [ 3.194721] thermal thermal_zone2: power_allocator: sustainable_power will be estimated | |
| [ 3.194755] thermal thermal_zone3: power_allocator: sustainable_power will be estimated | |
| [ 3.194788] thermal thermal_zone4: power_allocator: sustainable_power will be estimated | |
| [ 3.194822] thermal thermal_zone5: power_allocator: sustainable_power will be estimated | |
| [ 3.194856] thermal thermal_zone6: power_allocator: sustainable_power will be estimated | |
| [ 3.194880] cpuidle: using governor menu | |
| [ 3.194890] Registered FIQ tty driver | |
| [ 3.195042] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 3.195157] ASID allocator initialised with 65536 entries | |
| [ 3.196808] printk: console [ramoops-1] enabled | |
| [ 3.196815] pstore: Registered ramoops as persistent store backend | |
| [ 3.196821] ramoops: using 0xf0000@0x110000, ecc: 0 | |
| [ 3.242094] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000 | |
| [ 3.242320] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000 | |
| [ 3.242528] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000 | |
| [ 3.242770] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000 | |
| [ 3.242994] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000 | |
| [ 3.243042] rockchip-pinctrl pinctrl: probed pinctrl | |
| [ 3.256117] fiq_debugger fiq_debugger.0: IRQ fiq not found | |
| [ 3.256131] fiq_debugger fiq_debugger.0: IRQ wakeup not found | |
| [ 3.256138] fiq_debugger_probe: could not install nmi irq handler | |
| [ 3.256378] printk: console [ttyFIQ0] enabled | |
| [ 3.256466] Registered fiq debugger ttyFIQ0 | |
| [ 3.256790] vcc5v0_sys: supplied by vcc12v_dcin | |
| [ 3.257147] vcc_1v1_nldo_s3: supplied by vcc5v0_sys | |
| [ 3.257317] vcc5v0_host: supplied by vcc5v0_sys | |
| [ 3.257457] vcc3v3_pcie2x1l0: supplied by vcc5v0_sys | |
| [ 3.313962] vcc3v3_pcie30: supplied by vcc5v0_sys | |
| [ 3.314210] iommu: Default domain type: Translated | |
| [ 3.314287] rk_iommu fdab9000.iommu: version = 2 | |
| [ 3.314637] rk_iommu fdb50800.iommu: version = 2 | |
| [ 3.314875] rk_iommu fdb60f00.iommu: version = 2 | |
| [ 3.315055] rk_iommu fdb70f00.iommu: version = 2 | |
| [ 3.315224] rk_iommu fdb90480.iommu: version = 2 | |
| [ 3.315405] rk_iommu fdba0800.iommu: version = 2 | |
| [ 3.315586] rk_iommu fdba4800.iommu: version = 2 | |
| [ 3.315765] rk_iommu fdba8800.iommu: version = 2 | |
| [ 3.315947] rk_iommu fdbac800.iommu: version = 2 | |
| [ 3.316127] rk_iommu fdbb0800.iommu: version = 2 | |
| [ 3.316317] rk_iommu fdbdf000.iommu: version = 2 | |
| [ 3.316586] rk_iommu fdbef000.iommu: version = 2 | |
| [ 3.316864] rk_iommu fdc38700.iommu: version = 2 | |
| [ 3.317144] rk_iommu fdc48700.iommu: version = 2 | |
| [ 3.317285] rk_iommu fdd97e00.iommu: version = 2 | |
| [ 3.317591] SCSI subsystem initialized | |
| [ 3.317676] usbcore: registered new interface driver usbfs | |
| [ 3.317695] usbcore: registered new interface driver hub | |
| [ 3.317712] usbcore: registered new device driver usb | |
| [ 3.317750] mc: Linux media interface: v0.10 | |
| [ 3.317763] videodev: Linux video capture interface: v2.00 | |
| [ 3.317792] pps_core: LinuxPPS API ver. 1 registered | |
| [ 3.317798] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 3.317809] PTP clock support registered | |
| [ 3.318046] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. | |
| [ 3.318081] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 | |
| [ 3.319181] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 3.320678] rockchip-cpuinfo cpuinfo: SoC : 35880000 | |
| [ 3.320688] rockchip-cpuinfo cpuinfo: Serial : ec17aa0b9b01ec68 | |
| [ 3.320989] clocksource: Switched to clocksource arch_sys_counter | |
| [ 3.675950] VFS: Disk quotas dquot_6.6.0 | |
| [ 3.675991] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 3.680719] NET: Registered protocol family 2 | |
| [ 3.680889] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 3.684451] tcp_listen_portaddr_hash hash table entries: 8192 (order: 6, 327680 bytes, linear) | |
| [ 3.684615] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 3.685251] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 3.685962] TCP: Hash tables configured (established 131072 bind 65536) | |
| [ 3.686020] UDP hash table entries: 8192 (order: 7, 786432 bytes, linear) | |
| [ 3.686303] UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes, linear) | |
| [ 3.686648] NET: Registered protocol family 1 | |
| [ 3.686842] RPC: Registered named UNIX socket transport module. | |
| [ 3.686849] RPC: Registered udp transport module. | |
| [ 3.686854] RPC: Registered tcp transport module. | |
| [ 3.686859] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 3.687258] PCI: CLS 0 bytes, default 64 | |
| [ 3.687569] Trying to unpack rootfs image as initramfs... | |
| [ 4.188058] Freeing initrd memory: 19936K | |
| [ 4.188788] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available | |
| [ 4.189303] kvm [1]: IPA Size Limit: 40 bits | |
| [ 4.189319] kvm [1]: GICv3: no GICV resource entry | |
| [ 4.189325] kvm [1]: disabling GICv2 emulation | |
| [ 4.189331] kvm [1]: GIC system register CPU interface enabled | |
| [ 4.189461] kvm [1]: vgic interrupt IRQ9 | |
| [ 4.189617] kvm [1]: VHE mode initialized successfully | |
| [ 4.191590] Initialise system trusted keyrings | |
| [ 4.191657] workingset: timestamp_bits=46 max_order=22 bucket_order=0 | |
| [ 4.194232] NFS: Registering the id_resolver key type | |
| [ 4.194248] Key type id_resolver registered | |
| [ 4.194253] Key type id_legacy registered | |
| [ 4.194290] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 4.194297] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 4.194324] ntfs: driver 2.1.32 [Flags: R/W]. | |
| [ 4.194768] NET: Registered protocol family 38 | |
| [ 4.194777] Key type asymmetric registered | |
| [ 4.194783] Asymmetric key parser 'x509' registered | |
| [ 4.194801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) | |
| [ 4.194808] io scheduler mq-deadline registered | |
| [ 4.194817] io scheduler kyber registered | |
| [ 4.202541] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success | |
| [ 4.202754] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success | |
| [ 4.205197] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node | |
| [ 4.205287] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node | |
| [ 4.205360] mpp_service mpp-srv: c71d300e428a author: Jianqun Xu 2022-06-22 video: rockchip: mpp: reset buffer members when release buffer | |
| [ 4.205373] mpp_service mpp-srv: probe start | |
| [ 4.206650] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1 | |
| [ 4.206864] mpp_vdpu2 fdb50400.vdpu: probe device | |
| [ 4.206980] mpp_vdpu2 fdb50400.vdpu: reset group is empty! | |
| [ 4.206988] vdpu_init:501: No aclk reset resource define | |
| [ 4.206995] mpp_vdpu2 fdb50400.vdpu: reset group is empty! | |
| [ 4.207000] vdpu_init:504: No hclk reset resource define | |
| [ 4.207086] mpp_vdpu2 fdb50400.vdpu: probing finish | |
| [ 4.207290] mpp_vepu2 jpege-ccu: probing start | |
| [ 4.207298] mpp_vepu2 jpege-ccu: probing finish | |
| [ 4.207419] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5 | |
| [ 4.207556] mpp_vepu2 fdba0000.jpege-core: probing start | |
| [ 4.207670] mpp_vepu2 fdba0000.jpege-core: attach ccu success | |
| [ 4.207756] mpp_vepu2 fdba0000.jpege-core: probing finish | |
| [ 4.207850] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6 | |
| [ 4.208005] mpp_vepu2 fdba4000.jpege-core: probing start | |
| [ 4.208105] mpp_vepu2 fdba4000.jpege-core: attach ccu success | |
| [ 4.208186] mpp_vepu2 fdba4000.jpege-core: probing finish | |
| [ 4.208278] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7 | |
| [ 4.208411] mpp_vepu2 fdba8000.jpege-core: probing start | |
| [ 4.208507] mpp_vepu2 fdba8000.jpege-core: attach ccu success | |
| [ 4.208590] mpp_vepu2 fdba8000.jpege-core: probing finish | |
| [ 4.208681] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8 | |
| [ 4.208812] mpp_vepu2 fdbac000.jpege-core: probing start | |
| [ 4.208908] mpp_vepu2 fdbac000.jpege-core: attach ccu success | |
| [ 4.208987] mpp_vepu2 fdbac000.jpege-core: probing finish | |
| [ 4.209249] mpp-iep2 fdbb0000.iep: Adding to iommu group 9 | |
| [ 4.209382] mpp-iep2 fdbb0000.iep: probe device | |
| [ 4.209497] mpp-iep2 fdbb0000.iep: allocate roi buffer failed | |
| [ 4.209555] mpp-iep2 fdbb0000.iep: probing finish | |
| [ 4.209757] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4 | |
| [ 4.209960] mpp_jpgdec fdb90000.jpegd: probe device | |
| [ 4.210147] mpp_jpgdec fdb90000.jpegd: probing finish | |
| [ 4.210487] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start | |
| [ 4.210562] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish | |
| [ 4.210700] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12 | |
| [ 4.210915] rk-pcie fe170000.pcie: missing legacy IRQ resource | |
| [ 4.210944] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start | |
| [ 4.210948] rk-pcie fe170000.pcie: IRQ msi not found | |
| [ 4.210952] rk-pcie fe170000.pcie: use outband MSI support | |
| [ 4.211001] rk-pcie fe170000.pcie: Missing *config* reg space | |
| [ 4.211028] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges: | |
| [ 4.211075] rk-pcie fe170000.pcie: err 0x00f2000000..0x00f20fffff -> 0x00f2000000 | |
| [ 4.211082] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found! | |
| [ 4.211099] rkvdec2_init:697: No niu aclk reset resource define | |
| [ 4.211106] rk-pcie fe170000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000 | |
| [ 4.211115] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found! | |
| [ 4.211121] rkvdec2_init:700: No niu hclk reset resource define | |
| [ 4.211128] rk-pcie fe170000.pcie: MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000 | |
| [ 4.211139] rk-pcie fe170000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000 | |
| [ 4.211188] rk-pcie fe170000.pcie: Missing *config* reg space | |
| [ 4.211193] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001 | |
| [ 4.211209] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0 | |
| [ 4.211254] rk-pcie fe170000.pcie: invalid resource | |
| [ 4.211286] rk-pcie fe150000.pcie: missing legacy IRQ resource | |
| [ 4.211319] rk-pcie fe150000.pcie: IRQ msi not found | |
| [ 4.211336] rk-pcie fe150000.pcie: use outband MSI support | |
| [ 4.211353] rk-pcie fe150000.pcie: Missing *config* reg space | |
| [ 4.211358] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000 | |
| [ 4.211373] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000 | |
| [ 4.211383] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges: | |
| [ 4.211390] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520 | |
| [ 4.211396] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576 | |
| [ 4.211403] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512 | |
| [ 4.211408] rk-pcie fe150000.pcie: err 0x00f0000000..0x00f00fffff -> 0x00f0000000 | |
| [ 4.211423] rk-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000 | |
| [ 4.211447] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish | |
| [ 4.211458] rk-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000 | |
| [ 4.211489] rk-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000 | |
| [ 4.211531] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13 | |
| [ 4.211538] rk-pcie fe150000.pcie: Missing *config* reg space | |
| [ 4.211565] rk-pcie fe150000.pcie: invalid resource | |
| [ 4.211750] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start | |
| [ 4.211861] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found! | |
| [ 4.211868] rkvdec2_init:697: No niu aclk reset resource define | |
| [ 4.211876] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found! | |
| [ 4.211882] rkvdec2_init:700: No niu hclk reset resource define | |
| [ 4.211932] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002 | |
| [ 4.211952] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1 | |
| [ 4.212113] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000 | |
| [ 4.212120] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000 | |
| [ 4.212126] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424 | |
| [ 4.212133] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576 | |
| [ 4.212140] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512 | |
| [ 4.212169] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish | |
| [ 4.212349] mpp_rkvenc2 rkvenc-ccu: probing start | |
| [ 4.212357] mpp_rkvenc2 rkvenc-ccu: probing finish | |
| [ 4.212475] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10 | |
| [ 4.212644] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start | |
| [ 4.212664] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8 | |
| [ 4.212808] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0 | |
| [ 4.212900] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish | |
| [ 4.212969] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11 | |
| [ 4.213189] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start | |
| [ 4.213207] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8 | |
| [ 4.213366] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1 | |
| [ 4.213456] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish | |
| [ 4.213750] mpp_av1dec: Adding child /av1d@fdc70000 | |
| [ 4.213958] mpp_av1dec: register device av1d-master | |
| [ 4.214160] mpp_av1dec av1d-master: probing start | |
| [ 4.214219] mpp_iommu_probe:405: failed to get device node | |
| [ 4.214226] mpp_av1dec av1d-master: failed to attach iommu | |
| [ 4.214359] mpp_av1dec av1d-master: probing finish | |
| [ 4.214396] mpp_service mpp-srv: probe success | |
| [ 4.221938] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 4.221953] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 | |
| [ 4.222849] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 4.222862] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 | |
| [ 4.223729] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 4.223741] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 | |
| [ 4.224181] rockchip-pvtm fda40000.pvtm: pvtm@0 probed | |
| [ 4.224247] rockchip-pvtm fda50000.pvtm: pvtm@1 probed | |
| [ 4.224305] rockchip-pvtm fda60000.pvtm: pvtm@2 probed | |
| [ 4.224380] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed | |
| [ 4.224436] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed | |
| [ 4.225024] rockchip-system-monitor rockchip-system-monitor: system monitor probe | |
| [ 4.225791] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled | |
| [ 4.226344] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 83, base_baud = 1500000) is a 16550A | |
| [ 4.227474] random: fast init done | |
| [ 4.227580] random: crng init done | |
| [ 4.228182] rockchip-vop2 fdd90000.vop: Adding to iommu group 14 | |
| [ 4.235260] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2 | |
| [ 4.235279] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3 | |
| [ 4.235304] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8 | |
| [ 4.235317] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9 | |
| [ 4.235330] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2 | |
| [ 4.235339] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2 | |
| [ 4.235547] [drm] failed to init overlay plane Cluster0-win1 | |
| [ 4.235590] [drm] failed to init overlay plane Cluster1-win1 | |
| [ 4.235624] [drm] failed to init overlay plane Cluster2-win1 | |
| [ 4.235657] [drm] failed to init overlay plane Cluster3-win1 | |
| [ 4.245950] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010edfc40) | |
| [ 4.246523] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver | |
| [ 4.246709] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010ee7980) | |
| [ 4.247317] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver | |
| [ 4.247490] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010ee7980) | |
| [ 4.247557] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc010ee9c08) | |
| [ 4.247937] rockchip-drm display-subsystem: failed to parse loader memory | |
| [ 4.248015] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes | |
| [ 4.248088] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes | |
| [ 4.248115] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes | |
| [ 4.248623] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0 | |
| [ 4.255013] brd: module loaded | |
| [ 4.258237] loop: module loaded | |
| [ 4.258439] zram: Added device: zram0 | |
| [ 4.258584] lkdtm: No crash points registered, enable through debugfs | |
| [ 4.258679] system_heap: orders[0] = 6 | |
| [ 4.258687] system_heap: orders[1] = 4 | |
| [ 4.258693] system_heap: orders[2] = 0 | |
| [ 4.260851] rockchip-spi feb20000.spi: no high_speed pinctrl state | |
| [ 4.262299] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1 | |
| [ 4.262447] rk806 spi2.0: ON: 0x40 OFF:0x0 | |
| [ 4.264571] vdd_gpu_s0: supplied by vcc5v0_sys | |
| [ 4.265701] vdd_cpu_lit_s0: supplied by vcc5v0_sys | |
| [ 4.266374] vdd_log_s0: supplied by vcc5v0_sys | |
| [ 4.267031] vdd_vdenc_s0: supplied by vcc5v0_sys | |
| [ 4.267752] vdd_ddr_s0: supplied by vcc5v0_sys | |
| [ 4.268158] vdd2_ddr_s3: supplied by vcc5v0_sys | |
| [ 4.268766] vdd_2v0_pldo_s3: supplied by vcc5v0_sys | |
| [ 4.269314] vcc_3v3_s3: supplied by vcc5v0_sys | |
| [ 4.269842] vddq_ddr_s0: supplied by vcc5v0_sys | |
| [ 4.270447] vcc_1v8_s3: supplied by vcc5v0_sys | |
| [ 4.271070] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3 | |
| [ 4.271691] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3 | |
| [ 4.272236] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3 | |
| [ 4.272774] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3 | |
| [ 4.273316] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3 | |
| [ 4.273940] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3 | |
| [ 4.274616] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3 | |
| [ 4.275214] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3 | |
| [ 4.275814] vcc_3v3_s0: supplied by vcc5v0_sys | |
| [ 4.276350] vccio_sd_s0: supplied by vcc5v0_sys | |
| [ 4.276902] pldo6_s3: supplied by vcc5v0_sys | |
| [ 4.277412] rk806 spi2.0: no sleep-setting state | |
| [ 4.277421] rk806 spi2.0: no reset-setting pinctrl state | |
| [ 4.277429] rk806 spi2.0: no dvs-setting pinctrl state | |
| [ 4.280684] spi-nor spi5.0: mx25u12835f (16384 Kbytes) read_data x4 | |
| [ 4.280708] 1 fixed-partitions partitions found on MTD device sfc_nor | |
| [ 4.280716] Creating 1 MTD partitions on "sfc_nor": | |
| [ 4.280725] 0x000000000000-0x000001000000 : "loader" | |
| [ 4.281820] libphy: Fixed MDIO Bus: probed | |
| [ 4.282805] usbcore: registered new interface driver rndis_wlan | |
| [ 4.282831] usbcore: registered new interface driver asix | |
| [ 4.282853] usbcore: registered new interface driver cdc_ether | |
| [ 4.282872] usbcore: registered new interface driver rndis_host | |
| [ 4.282896] usbcore: registered new interface driver cdc_ncm | |
| [ 4.296935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 4.296953] ehci-pci: EHCI PCI platform driver | |
| [ 4.296984] ehci-platform: EHCI generic platform driver | |
| [ 4.299410] ehci-platform fc800000.usb: EHCI Host Controller | |
| [ 4.299434] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1 | |
| [ 4.299501] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000 | |
| [ 4.311002] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 4.311100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
| [ 4.311112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.311121] usb usb1: Product: EHCI Host Controller | |
| [ 4.311128] usb usb1: Manufacturer: Linux 5.10.66-custom+ ehci_hcd | |
| [ 4.311136] usb usb1: SerialNumber: fc800000.usb | |
| [ 4.311407] hub 1-0:1.0: USB hub found | |
| [ 4.311427] hub 1-0:1.0: 1 port detected | |
| [ 4.313954] ehci-platform fc880000.usb: EHCI Host Controller | |
| [ 4.313971] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2 | |
| [ 4.314031] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000 | |
| [ 4.324333] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 4.324420] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
| [ 4.324431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.324440] usb usb2: Product: EHCI Host Controller | |
| [ 4.324447] usb usb2: Manufacturer: Linux 5.10.66-custom+ ehci_hcd | |
| [ 4.324455] usb usb2: SerialNumber: fc880000.usb | |
| [ 4.324686] hub 2-0:1.0: USB hub found | |
| [ 4.324708] hub 2-0:1.0: 1 port detected | |
| [ 4.325037] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 4.325052] ohci-platform: OHCI generic platform driver | |
| [ 4.325208] ohci-platform fc840000.usb: Generic Platform OHCI controller | |
| [ 4.325222] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3 | |
| [ 4.325272] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000 | |
| [ 4.385079] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 | |
| [ 4.385092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.385101] usb usb3: Product: Generic Platform OHCI controller | |
| [ 4.385109] usb usb3: Manufacturer: Linux 5.10.66-custom+ ohci_hcd | |
| [ 4.385117] usb usb3: SerialNumber: fc840000.usb | |
| [ 4.385352] hub 3-0:1.0: USB hub found | |
| [ 4.385371] hub 3-0:1.0: 1 port detected | |
| [ 4.385629] ohci-platform fc8c0000.usb: Generic Platform OHCI controller | |
| [ 4.385644] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4 | |
| [ 4.385701] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000 | |
| [ 4.418812] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.418819] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0 | |
| [ 4.444350] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.445078] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 | |
| [ 4.445093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.445102] usb usb4: Product: Generic Platform OHCI controller | |
| [ 4.445111] usb usb4: Manufacturer: Linux 5.10.66-custom+ ohci_hcd | |
| [ 4.445118] usb usb4: SerialNumber: fc8c0000.usb | |
| [ 4.445349] hub 4-0:1.0: USB hub found | |
| [ 4.445369] hub 4-0:1.0: 1 port detected | |
| [ 4.445946] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller | |
| [ 4.445963] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5 | |
| [ 4.446044] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 | |
| [ 4.446072] xhci-hcd xhci-hcd.10.auto: irq 126, io mem 0xfcd00000 | |
| [ 4.446207] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
| [ 4.446218] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.446227] usb usb5: Product: xHCI Host Controller | |
| [ 4.446235] usb usb5: Manufacturer: Linux 5.10.66-custom+ xhci-hcd | |
| [ 4.446242] usb usb5: SerialNumber: xhci-hcd.10.auto | |
| [ 4.446480] hub 5-0:1.0: USB hub found | |
| [ 4.446502] hub 5-0:1.0: 1 port detected | |
| [ 4.446639] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller | |
| [ 4.446651] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6 | |
| [ 4.446667] xhci-hcd xhci-hcd.10.auto: Host supports USB 3.0 SuperSpeed | |
| [ 4.446700] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 4.446758] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
| [ 4.446768] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.446777] usb usb6: Product: xHCI Host Controller | |
| [ 4.446784] usb usb6: Manufacturer: Linux 5.10.66-custom+ xhci-hcd | |
| [ 4.446792] usb usb6: SerialNumber: xhci-hcd.10.auto | |
| [ 4.447020] hub 6-0:1.0: USB hub found | |
| [ 4.447040] hub 6-0:1.0: 1 port detected | |
| [ 4.447254] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode | |
| [ 4.447265] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller | |
| [ 4.447278] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 7 | |
| [ 4.447368] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 | |
| [ 4.447395] xhci-hcd xhci-hcd.11.auto: irq 127, io mem 0xfc400000 | |
| [ 4.447532] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
| [ 4.447543] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.447552] usb usb7: Product: xHCI Host Controller | |
| [ 4.447560] usb usb7: Manufacturer: Linux 5.10.66-custom+ xhci-hcd | |
| [ 4.447567] usb usb7: SerialNumber: xhci-hcd.11.auto | |
| [ 4.447823] hub 7-0:1.0: USB hub found | |
| [ 4.447842] hub 7-0:1.0: 1 port detected | |
| [ 4.447975] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller | |
| [ 4.447986] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 8 | |
| [ 4.447999] xhci-hcd xhci-hcd.11.auto: Host supports USB 3.0 SuperSpeed | |
| [ 4.448032] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 4.448086] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
| [ 4.448096] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.448105] usb usb8: Product: xHCI Host Controller | |
| [ 4.448112] usb usb8: Manufacturer: Linux 5.10.66-custom+ xhci-hcd | |
| [ 4.448120] usb usb8: SerialNumber: xhci-hcd.11.auto | |
| [ 4.448356] hub 8-0:1.0: USB hub found | |
| [ 4.448375] hub 8-0:1.0: 1 port detected | |
| [ 4.448567] usbcore: registered new interface driver cdc_acm | |
| [ 4.448576] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
| [ 4.448674] usbcore: registered new interface driver uas | |
| [ 4.448742] usbcore: registered new interface driver usb-storage | |
| [ 4.449154] usbcore: registered new interface driver usbtouchscreen | |
| [ 4.450283] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.8.auto/input/input0 | |
| [ 4.450587] i2c /dev entries driver | |
| [ 4.454301] vdd_cpu_big0_s0: supplied by vcc5v0_sys | |
| [ 4.462874] vdd_cpu_big1_s0: supplied by vcc5v0_sys | |
| [ 4.471897] vdd_npu_s0: supplied by vcc5v0_sys | |
| [ 4.474343] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.491029] rtc-hym8563 6-0051: rtc information is valid | |
| [ 4.496327] rtc-hym8563 6-0051: registered as rtc0 | |
| [ 4.497340] rtc-hym8563 6-0051: setting system clock to 2022-10-27T02:45:23 UTC (1666838723) | |
| [ 4.501019] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.501030] rk-pcie fe150000.pcie: PCIe Link up, LTSSM is 0x230011 | |
| [ 4.501242] rk-pcie fe150000.pcie: PCI host bridge to bus 0000:00 | |
| [ 4.501272] pci_bus 0000:00: root bus resource [bus 00-0f] | |
| [ 4.501296] pci_bus 0000:00: root bus resource [??? 0xf0000000-0xf00fffff flags 0x0] | |
| [ 4.501338] pci_bus 0000:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xf0100000-0xf01fffff]) | |
| [ 4.501368] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff] | |
| [ 4.501392] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref] | |
| [ 4.501455] pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400 | |
| [ 4.501489] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff] | |
| [ 4.501517] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff] | |
| [ 4.501543] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] | |
| [ 4.501634] pci 0000:00:00.0: supports D1 D2 | |
| [ 4.501656] pci 0000:00:00.0: PME# supported from D0 D1 D3hot | |
| [ 4.515808] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) | |
| [ 4.515904] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA | |
| [ 4.515937] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4, wdt_cfg_bound_cpu:5 | |
| [ 4.515956] pci 0000:01:00.0: [1d97:5216] type 00 class 0x010802 | |
| [ 4.516044] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] | |
| [ 4.516163] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] | |
| [ 4.516432] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0 | |
| [ 4.517356] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success | |
| [ 4.517381] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok! | |
| [ 4.517495] usbcore: registered new interface driver uvcvideo | |
| [ 4.517504] USB Video Class driver (1.1.1) | |
| [ 4.518716] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property | |
| [ 4.519248] rockchip-thermal fec00000.tsadc: tsadc is probed successfully! | |
| [ 4.519843] cpu cpu0: leakage=15 | |
| [ 4.521343] cpu cpu0: pvtm=1487 | |
| [ 4.521444] cpu cpu0: pvtm-volt-sel=4 | |
| [ 4.521946] cpu cpu4: leakage=12 | |
| [ 4.527684] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.530368] cpu cpu4: pvtm=1730 | |
| [ 4.538024] cpu cpu4: pvtm-volt-sel=5 | |
| [ 4.538065] pci 0000:00:00.0: BAR 0: no space for [mem size 0x40000000] | |
| [ 4.538074] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x40000000] | |
| [ 4.538083] pci 0000:00:00.0: BAR 1: no space for [mem size 0x40000000] | |
| [ 4.538090] pci 0000:00:00.0: BAR 1: failed to assign [mem size 0x40000000] | |
| [ 4.538099] pci 0000:00:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff] | |
| [ 4.538109] pci 0000:00:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref] | |
| [ 4.538122] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0200000-0xf021ffff pref] | |
| [ 4.538158] pci 0000:01:00.0: BAR 0: assigned [mem 0xf0220000-0xf022ffff 64bit] | |
| [ 4.538214] pci 0000:00:00.0: PCI bridge to [bus 01-ff] | |
| [ 4.538239] pci 0000:00:00.0: bridge window [mem 0xf0200000-0xf02fffff] | |
| [ 4.539355] cpu cpu6: leakage=12 | |
| [ 4.541557] pcieport 0000:00:00.0: PME: Signaling with IRQ 140 | |
| [ 4.542093] nvme nvme0: pci function 0000:01:00.0 | |
| [ 4.542162] nvme 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 4.545914] cpu cpu6: pvtm=1734 | |
| [ 4.549886] cpu cpu6: pvtm-volt-sel=5 | |
| [ 4.551512] cpu cpu0: avs=0 | |
| [ 4.552211] cpu cpu4: avs=0 | |
| [ 4.552894] cpu cpu6: avs=0 | |
| [ 4.553131] cpu cpu0: EM: created perf domain | |
| [ 4.553191] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0 | |
| [ 4.553744] cpu cpu4: EM: created perf domain | |
| [ 4.553792] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0 | |
| [ 4.554387] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.561054] usb 1-1: new high-speed USB device number 2 using ehci-platform | |
| [ 4.562221] cpu cpu6: EM: created perf domain | |
| [ 4.562669] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0 | |
| [ 4.581012] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.581051] sdhci: Secure Digital Host Controller Interface driver | |
| [ 4.581063] sdhci: Copyright(c) Pierre Ossman | |
| [ 4.581072] Synopsys Designware Multimedia Card Interface Driver | |
| [ 4.581629] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 4.582386] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. | |
| [ 4.582427] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. | |
| [ 4.582443] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a | |
| [ 4.582484] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 71,32 bit host data width,256 deep fifo | |
| [ 4.583139] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode. | |
| [ 4.583165] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller. | |
| [ 4.583181] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a | |
| [ 4.583215] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 72,32 bit host data width,256 deep fifo | |
| [ 4.583684] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 4.583748] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. | |
| [ 4.583828] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 4.584091] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq | |
| [ 4.584118] mmc_host mmc2: card is non-removable. | |
| [ 4.585431] cryptodev: driver 1.12 loaded. | |
| [ 4.585514] hid: raw HID events driver (C) Jiri Kosina | |
| [ 4.586088] usbcore: registered new interface driver usbhid | |
| [ 4.586119] usbhid: USB HID core driver | |
| [ 4.597923] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
| [ 4.598810] optee: probing for conduit method. | |
| [ 4.598848] optee: api uid mismatch | |
| [ 4.598875] optee: probe of firmware:optee failed with error -22 | |
| [ 4.599250] rksfc_base v1.1 2016-01-08 | |
| [ 4.600397] usbcore: registered new interface driver snd-usb-audio | |
| [ 4.601248] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
| [ 4.603971] debugfs: File 'Capture' in directory 'dapm' already present! | |
| [ 4.604718] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1 | |
| [ 4.605104] debugfs: File 'Capture' in directory 'dapm' already present! | |
| [ 4.605567] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card1/input2 | |
| [ 4.606021] Initializing XFRM netlink socket | |
| [ 4.606031] NET: Registered protocol family 17 | |
| [ 4.606054] [BT_RFKILL]: Enter rfkill_rk_init | |
| [ 4.606059] [WLAN_RFKILL]: Enter rfkill_wlan_init | |
| [ 4.606169] [WLAN_RFKILL]: Enter rfkill_wlan_probe | |
| [ 4.606185] [WLAN_RFKILL]: can't find rockchip,grf property | |
| [ 4.606189] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6256 | |
| [ 4.606194] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. | |
| [ 4.606198] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. | |
| [ 4.606214] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0. | |
| [ 4.606221] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! | |
| [ 4.606225] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio | |
| [ 4.606230] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1 | |
| [ 4.606235] [WLAN_RFKILL]: Exit rfkill_wlan_probe | |
| [ 4.606396] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 34. | |
| [ 4.606409] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 102. | |
| [ 4.606419] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 21. | |
| [ 4.606442] [BT_RFKILL]: Request irq for bt wakeup host | |
| [ 4.606473] [BT_RFKILL]: ** disable irq | |
| [ 4.606511] [BT_RFKILL]: bt_default device registered. | |
| [ 4.606546] Key type dns_resolver registered | |
| [ 4.606870] flash vendor_init_thread! | |
| [ 4.606886] flash vendor storage:20170308 ret = -1 | |
| [ 4.607239] registered taskstats version 1 | |
| [ 4.607245] Loading compiled-in X.509 certificates | |
| [ 4.607334] pstore: Using crash dump compression: deflate | |
| [ 4.607443] rga3_core0 fdb60000.rga: Adding to iommu group 2 | |
| [ 4.607576] rga: rga3_core0_irq, irq = 33, match scheduler | |
| [ 4.607703] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.607718] rga: rga3_core0 driver loaded successfully ver:3.0.76831 | |
| [ 4.607730] rga: rga3_core0 probe successfully | |
| [ 4.607865] rga3_core1 fdb70000.rga: Adding to iommu group 3 | |
| [ 4.607976] rga: rga3_core1_irq, irq = 34, match scheduler | |
| [ 4.608184] rga: rga3_core1 driver loaded successfully ver:3.0.76831 | |
| [ 4.608194] rga: rga3_core1 probe successfully | |
| [ 4.608337] rga: rga2_irq, irq = 35, match scheduler | |
| [ 4.608585] rga: rga2 driver loaded successfully ver:3.2.63318 | |
| [ 4.608592] rga: rga2 probe successfully | |
| [ 4.608818] rga: Module initialized. v1.2.14 | |
| [ 4.614626] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA | |
| [ 4.624579] vcc3v3_pcie2x1l2: supplied by vcc_3v3_s3 | |
| [ 4.625061] mali fb000000.gpu: Kernel DDK version g12p0-01eac0 | |
| [ 4.625568] rockchip-dmc dmc: leakage=46 | |
| [ 4.625575] rockchip-dmc dmc: leakage-volt-sel=2 | |
| [ 4.625725] rockchip-dmc dmc: avs=0 | |
| [ 4.625733] rockchip-dmc dmc: current ATF version 0x100 | |
| [ 4.625738] mali fb000000.gpu: leakage=20 | |
| [ 4.625795] rockchip-dmc dmc: normal_rate = 1560000000 | |
| [ 4.625801] rockchip-dmc dmc: reboot_rate = 2112000000 | |
| [ 4.625805] rockchip-dmc dmc: suspend_rate = 528000000 | |
| [ 4.625809] rockchip-dmc dmc: video_4k_rate = 1560000000 | |
| [ 4.625814] rockchip-dmc dmc: video_4k_10b_rate = 1560000000 | |
| [ 4.625818] rockchip-dmc dmc: boost_rate = 2112000000 | |
| [ 4.625822] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000 | |
| [ 4.625827] rockchip-dmc dmc: performance_rate = 2112000000 | |
| [ 4.625833] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate | |
| [ 4.625838] rockchip-dmc dmc: failed to get vop pn to msch rl | |
| [ 4.625891] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0 | |
| [ 4.629531] mali fb000000.gpu: pvtm=890 | |
| [ 4.630751] rockchip-dmc dmc: could not find power_model node | |
| [ 4.630821] mali fb000000.gpu: pvtm-volt-sel=4 | |
| [ 4.631847] mali fb000000.gpu: avs=0 | |
| [ 4.633380] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available. | |
| [ 4.634344] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.637511] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) | |
| [ 4.641344] mali fb000000.gpu: GPU hardware issue table may need updating: | |
| [ 4.641344] r0p0 status 5 is unknown; treating as r0p0 status 0 | |
| [ 4.641443] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0 | |
| [ 4.641921] mali fb000000.gpu: No priority control manager is configured | |
| [ 4.641973] mali fb000000.gpu: No memory group manager is configured | |
| [ 4.642073] mali fb000000.gpu: Protected memory allocator not available | |
| [ 4.644809] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model' | |
| [ 4.644869] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0] | |
| [ 4.645626] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0] | |
| [ 4.646396] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0] | |
| [ 4.647084] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = '' | |
| [ 4.650362] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model | |
| [ 4.650564] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0 | |
| [ 4.652351] mali fb000000.gpu: Probed as mali0 | |
| [ 4.680904] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) | |
| [ 4.683782] nvme nvme0: Shutdown timeout set to 8 seconds | |
| [ 4.697370] nvme nvme0: allocated 64 MiB host memory buffer. | |
| [ 4.709136] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 | |
| [ 4.709193] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| [ 4.709208] usb 1-1: Product: USB 2.0 Hub | |
| [ 4.709967] hub 1-1:1.0: USB hub found | |
| [ 4.710221] hub 1-1:1.0: 4 ports detected | |
| [ 4.733521] mmc_host mmc2: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1) | |
| [ 4.777643] debugfs: File 'Left Hp mixer' in directory 'dapm' already present! | |
| [ 4.777721] debugfs: File 'Right Hp mixer' in directory 'dapm' already present! | |
| [ 4.777749] debugfs: File 'HPCP L' in directory 'dapm' already present! | |
| [ 4.777764] debugfs: File 'HPCP R' in directory 'dapm' already present! | |
| [ 4.777801] debugfs: File 'HPVOL L' in directory 'dapm' already present! | |
| [ 4.777817] debugfs: File 'HPVOL R' in directory 'dapm' already present! | |
| [ 4.781467] rk-pcie fe190000.pcie: invalid prsnt-gpios property in node | |
| [ 4.782404] rk-pcie fe190000.pcie: missing legacy IRQ resource | |
| [ 4.782464] rk-pcie fe190000.pcie: IRQ msi not found | |
| [ 4.782481] rk-pcie fe190000.pcie: use outband MSI support | |
| [ 4.782501] rk-pcie fe190000.pcie: Missing *config* reg space | |
| [ 4.782531] rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges: | |
| [ 4.782577] rk-pcie fe190000.pcie: err 0x00f4000000..0x00f40fffff -> 0x00f4000000 | |
| [ 4.782615] rk-pcie fe190000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000 | |
| [ 4.782655] rk-pcie fe190000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000 | |
| [ 4.782684] rk-pcie fe190000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000 | |
| [ 4.782758] rk-pcie fe190000.pcie: Missing *config* reg space | |
| [ 4.782806] rk-pcie fe190000.pcie: invalid resource | |
| [ 4.783729] rockchip_headset rk-headset: Can not read property hook_gpio | |
| [ 4.783817] rockchip_headset rk-headset: headset have hook adc mode | |
| [ 4.783959] input: rk-headset as /devices/platform/rk-headset/input/input3 | |
| [ 4.784928] RKNPU fdab0000.npu: Adding to iommu group 0 | |
| [ 4.785122] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode | |
| [ 4.786785] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff] | |
| [ 4.786858] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff] | |
| [ 4.786899] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff] | |
| [ 4.787812] [drm] Initialized rknpu 0.7.2 20220428 for fdab0000.npu on minor 1 | |
| [ 4.790937] RKNPU fdab0000.npu: leakage=11 | |
| [ 4.793997] nvme nvme0: 8/0/0 default/read/poll queues | |
| [ 4.796124] nvme0n1: p1 p2 | |
| [ 4.798670] RKNPU fdab0000.npu: pvtm=895 | |
| [ 4.803765] RKNPU fdab0000.npu: pvtm-volt-sel=4 | |
| [ 4.805573] RKNPU fdab0000.npu: avs=0 | |
| [ 4.805924] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0 | |
| [ 4.816500] RKNPU fdab0000.npu: failed to find power_model node | |
| [ 4.816575] RKNPU fdab0000.npu: RKNPU: failed to initialize power model | |
| [ 4.816613] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient | |
| [ 4.819107] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 4.835302] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 4.838954] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '00:57:31', on 'Oct 27 2022'. | |
| [ 4.839487] Mali: | |
| [ 4.839491] Mali device driver loaded | |
| [ 4.839525] ALSA device list: | |
| [ 4.839542] #0: rockchip-hdmi0 | |
| [ 4.839557] #1: rockchip-hdmi1 | |
| [ 4.839573] #2: rockchip-es8316 | |
| [ 4.839588] #3: rockchip,hdmiin | |
| [ 4.845292] Freeing unused kernel memory: 6080K | |
| [ 4.845818] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| [ 4.845859] cfg80211: failed to load regulatory.db | |
| [ 4.871721] Run /init as init process | |
| [ 5.047787] rk-pcie fe190000.pcie: PCIe Link up, LTSSM is 0x130011 | |
| [ 5.048055] rk-pcie fe190000.pcie: PCI host bridge to bus 0004:40 | |
| [ 5.048080] pci_bus 0004:40: root bus resource [bus 40-4f] | |
| [ 5.048094] pci_bus 0004:40: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0] | |
| [ 5.048111] pci_bus 0004:40: root bus resource [io 0x200000-0x2fffff] (bus address [0xf4100000-0xf41fffff]) | |
| [ 5.048128] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff] | |
| [ 5.048142] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff pref] | |
| [ 5.048193] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400 | |
| [ 5.048224] pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] | |
| [ 5.048297] pci 0004:40:00.0: supports D1 D2 | |
| [ 5.048309] pci 0004:40:00.0: PME# supported from D0 D1 D3hot | |
| [ 5.057554] pci 0004:40:00.0: Primary bus is hard wired to 0 | |
| [ 5.057594] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring | |
| [ 5.057904] pci 0004:41:00.0: [10ec:8125] type 00 class 0x020000 | |
| [ 5.057982] pci 0004:41:00.0: reg 0x10: [io 0x0000-0x00ff] | |
| [ 5.058053] pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] | |
| [ 5.058102] pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] | |
| [ 5.058474] pci 0004:41:00.0: supports D1 D2 | |
| [ 5.058489] pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| DDR Version V1.08 20220617 | |
| LPDDR4X, 2112MHz | |
| channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| Manufacturer ID:0x6 | |
| CH0 RX Vref:30.7%, TX Vref:24.8%,23.8% | |
| CH1 RX Vref:28.7%, TX Vref:26.8%,25.8% | |
| CH2 RX Vref:28.7%, TX Vref:26.8%,26.8% | |
| CH3 RX Vref:29.7%, TX Vref:25.8%,25.8% | |
| change to F1: 528MHz | |
| change to F2: 1068MHz | |
| change to F3: 1560MHz | |
| change to F0: 2112MHz | |
| out | |
| U-Boot SPL board init | |
| U-Boot SPL 2017.09-g3caf61a44c2-220414 #stephen (Sep 29 2022 - 18:14:19) | |
| Trying to boot from MMC2 | |
| MMC: no card present | |
| mmc_init: -123, time 0 | |
| spl: mmc init failed with error: -123 | |
| Trying to boot from MMC1 | |
| Card did not respond to voltage select! | |
| mmc_init: -95, time 14 | |
| spl: mmc init failed with error: -95 | |
| Trying to boot from MTD2 | |
| Trying fit image at 0x4000 sector | |
| ## Verified-boot: 0 | |
| ## Checking atf-1 0x00040000 ... sha256(806278dba1...) + OK | |
| ## Checking uboot 0x00200000 ... sha256(6a08776395...) + OK | |
| ## Checking fdt 0x0030a010 ... sha256(d32827d3ac...) + OK | |
| ## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK | |
| ## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK | |
| ## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK | |
| Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) | |
| Total: 498.340 ms | |
| INFO: Preloader serial: 2 | |
| NOTICE: BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang | |
| NOTICE: BL31: Built : 11:23:47, Aug 15 2022 | |
| INFO: spec: 0x1 | |
| INFO: ext 32k is not valid | |
| INFO: GICv3 without legacy support detected. | |
| INFO: ARM GICv3 driver initialized in EL3 | |
| INFO: system boots from cpu-hwid-0 | |
| INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 | |
| INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz | |
| INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz | |
| INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz | |
| INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz | |
| INFO: BL31: Initialising Exception Handling Framework | |
| INFO: BL31: Initializing runtime services | |
| WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK | |
| ERROR: Error initializing runtime service opteed_fast | |
| INFO: BL31: Preparing for EL3 exit to normal world | |
| INFO: Entry point address = 0x200000 | |
| INFO: SPSR = 0x3c9 | |
| U-Boot 2017.09-g3caf61a44c2-220414 #stephen (Sep 29 2022 - 18:14:19 +0800) | |
| Model: Radxa ROCK 5B | |
| PreSerial: 2, raw, 0xfeb50000 | |
| DRAM: 15.7 GiB | |
| Sysmem: init | |
| Relocation Offset: edb6d000 | |
| Relocation fdt: eb9f9cd8 - eb9fecc8 | |
| CR: M/C/I | |
| Using default environment | |
| SF: Detected sfc_nor with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
| Bootdev(atags): mtd 2 | |
| PartType: EFI | |
| DM: v2 | |
| No misc partition | |
| boot mode: None | |
| FIT: No boot partition | |
| No resource partition | |
| No resource partition | |
| No resource partition | |
| Failed to load DTB, ret=-19 | |
| No find valid DTB, ret=-22 | |
| Failed to get kernel dtb, ret=-22 | |
| Model: Radxa ROCK 5B | |
| CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) | |
| b0pll 24000 KHz | |
| b1pll 24000 KHz | |
| lpll 24000 KHz | |
| v0pll 24000 KHz | |
| aupll 24000 KHz | |
| cpll 1500000 KHz | |
| gpll 1188000 KHz | |
| npll 24000 KHz | |
| ppll 1100000 KHz | |
| aclk_center_root 702000 KHz | |
| pclk_center_root 100000 KHz | |
| hclk_center_root 396000 KHz | |
| aclk_center_low_root 500000 KHz | |
| aclk_top_root 750000 KHz | |
| pclk_top_root 100000 KHz | |
| aclk_low_top_root 396000 KHz | |
| No misc partition | |
| Net: No ethernet found. | |
| Hit key to stop autoboot('CTRL+C'): 0 | |
| invalid flags type! | |
| Device 0: Vendor: 0x1d97 Rev: V1.16.2 Prod: MC33402003757 | |
| Type: Hard Disk | |
| Capacity: 488386.3 MB = 476.9 GB (1000215216 x 512) | |
| ... is now current device | |
| Scanning nvme 0:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| reading /extlinux/extlinux.conf | |
| 360 bytes read in 0 ms | |
| select kernel | |
| 1: custom | |
| Enter choice: DDR Version V1.08 20220617 | |
| LPDDR4X, 2112MHz | |
| channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB | |
| Manufacturer ID:0x6 | |
| CH0 RX Vref:30.7%, TX Vref:24.8%,23.8% | |
| CH1 RX Vref:28.7%, TX Vref:25.8%,25.8% | |
| CH2 RX Vref:28.7%, TX Vref:26.8%,25.8% | |
| CH3 RX Vref:28.7%, TX Vref:25.8%,26.8% | |
| change to F1: 528MHz | |
| change to F2: 1068MHz | |
| change to F3: 1560MHz | |
| change to F0: 2112MHz | |
| out | |
| U-Boot SPL board init | |
| U-Boot SPL 2017.09-g3caf61a44c2-220414 #stephen (Sep 29 2022 - 18:14:19) | |
| Trying to boot from MMC2 | |
| MMC: no card present | |
| mmc_init: -123, time 0 | |
| spl: mmc init failed with error: -123 | |
| Trying to boot from MMC1 | |
| Card did not respond to voltage select! | |
| mmc_init: -95, time 14 | |
| spl: mmc init failed with error: -95 | |
| Trying to boot from MTD2 | |
| Trying fit image at 0x4000 sector | |
| ## Verified-boot: 0 | |
| ## Checking atf-1 0x00040000 ... sha256(806278dba1...) + OK | |
| ## Checking uboot 0x00200000 ... sha256(6a08776395...) + OK | |
| ## Checking fdt 0x0030a010 ... sha256(d32827d3ac...) + OK | |
| ## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK | |
| ## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK | |
| ## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK | |
| Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) | |
| Total: 497.579 ms | |
| INFO: Preloader serial: 2 | |
| NOTICE: BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang | |
| NOTICE: BL31: Built : 11:23:47, Aug 15 2022 | |
| INFO: spec: 0x1 | |
| INFO: ext 32k is not valid | |
| INFO: GICv3 without legacy support detected. | |
| INFO: ARM GICv3 driver initialized in EL3 | |
| INFO: system boots from cpu-hwid-0 | |
| INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 | |
| INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz | |
| INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz | |
| INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz | |
| INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz | |
| INFO: BL31: Initialising Exception Handling Framework | |
| INFO: BL31: Initializing runtime services | |
| WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK | |
| ERROR: Error initializing runtime service opteed_fast | |
| INFO: BL31: Preparing for EL3 exit to normal world | |
| INFO: Entry point address = 0x200000 | |
| INFO: SPSR = 0x3c9 | |
| U-Boot 2017.09-g3caf61a44c2-220414 #stephen (Sep 29 2022 - 18:14:19 +0800) | |
| Model: Radxa ROCK 5B | |
| PreSerial: 2, raw, 0xfeb50000 | |
| DRAM: 15.7 GiB | |
| Sysmem: init | |
| Relocation Offset: edb6d000 | |
| Relocation fdt: eb9f9cd8 - eb9fecc8 | |
| CR: M/C/I | |
| Using default environment | |
| SF: Detected sfc_nor with page size 256 Bytes, erase size 4 KiB, total 16 MiB | |
| Bootdev(atags): mtd 2 | |
| PartType: EFI | |
| DM: v2 | |
| No misc partition | |
| boot mode: None | |
| FIT: No boot partition | |
| No resource partition | |
| No resource partition | |
| No resource partition | |
| Failed to load DTB, ret=-19 | |
| No find valid DTB, ret=-22 | |
| Failed to get kernel dtb, ret=-22 | |
| Model: Radxa ROCK 5B | |
| CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A) | |
| b0pll 24000 KHz | |
| b1pll 24000 KHz | |
| lpll 24000 KHz | |
| v0pll 24000 KHz | |
| aupll 24000 KHz | |
| cpll 1500000 KHz | |
| gpll 1188000 KHz | |
| npll 24000 KHz | |
| ppll 1100000 KHz | |
| aclk_center_root 702000 KHz | |
| pclk_center_root 100000 KHz | |
| hclk_center_root 396000 KHz | |
| aclk_center_low_root 500000 KHz | |
| aclk_top_root 750000 KHz | |
| pclk_top_root 100000 KHz | |
| aclk_low_top_root 396000 KHz | |
| No misc partition | |
| Net: No ethernet found. | |
| Hit key to stop autoboot('CTRL+C'): 0 | |
| invalid flags type! | |
| Device 0: Vendor: 0x1d97 Rev: V1.16.2 Prod: MC33402003757 | |
| Type: Hard Disk | |
| Capacity: 488386.3 MB = 476.9 GB (1000215216 x 512) | |
| ... is now current device | |
| Scanning nvme 0:1... | |
| Found /extlinux/extlinux.conf | |
| Retrieving file: /extlinux/extlinux.conf | |
| reading /extlinux/extlinux.conf | |
| 360 bytes read in 0 ms | |
| select kernel | |
| 1: custom | |
| Enter choice: 1 | |
| 1: custom | |
| Retrieving file: /initramfs-custom.img | |
| reading /initramfs-custom.img | |
| 20418398 bytes read in 22 ms (885.1 MiB/s) | |
| Retrieving file: /Image-custom | |
| reading /Image-custom | |
| 29766144 bytes read in 32 ms (887.1 MiB/s) | |
| append: root=/dev/arm_nvme/root earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 console=tty1 loglevel=7 rootwait rw irqchip.gicv3_pseudo_nmi=0 switolb=1 | |
| Retrieving file: /dtbs-custom/rockchip/rk3588-rock-5b.dtb | |
| reading /dtbs-custom/rockchip/rk3588-rock-5b.dtb | |
| 251760 bytes read in 2 ms (120 MiB/s) | |
| Retrieving file: /boot/dtbs-custom/rockchip/overlay/rk3588-uart7-m2.dtbo | |
| ** Unable to read file /boot/dtbs-custom/rockchip/overlay/rk3588-uart7-m2.dtbo ** | |
| Failed loading overlay /boot/dtbs-custom/rockchip/overlay/rk3588-uart7-m2.dtbo | |
| Fdt Ramdisk skip relocation | |
| No misc partition | |
| ## Flattened Device Tree blob at 0x0a100000 | |
| Booting using the fdt blob at 0x0a100000 | |
| 'reserved-memory' cma: addr=10000000 size=10000000 | |
| Using Device Tree in place at 000000000a100000, end 000000000a14076f | |
| Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000) | |
| Adding bank: 0x100000000 - 0x3fc000000 (size: 0x2fc000000) | |
| Adding bank: 0x3fc500000 - 0x3fff00000 (size: 0x03a00000) | |
| Total: 2381.262 ms | |
| Starting kernel ... | |
| [ 2.399684] Booting Linux on physical CPU 0x0000000000 [0x412fd050] | |
| [ 2.399706] Linux version 5.10.66-custom+ (adam@rock5b) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP Wed Oct 26 07:41:27 UTC 2022 | |
| [ 2.410359] Machine model: Radxa ROCK 5B | |
| [ 2.410397] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '') | |
| [ 2.413085] printk: bootconsole [uart8250] enabled | |
| [ 2.413605] efi: UEFI not found. | |
| [ 2.417487] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB | |
| [ 2.418559] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB | |
| [ 2.419709] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB | |
| [ 2.420450] OF: reserved mem: initialized node cma, compatible id shared-dma-pool | |
| [ 2.722502] Zone ranges: | |
| [ 2.722748] DMA [mem 0x0000000000200000-0x00000000ffffffff] | |
| [ 2.723322] DMA32 empty | |
| [ 2.723591] Normal [mem 0x0000000100000000-0x00000003ffefffff] | |
| [ 2.724162] Movable zone start for each node | |
| [ 2.724556] Early memory node ranges | |
| [ 2.724887] node 0: [mem 0x0000000000200000-0x00000000efffffff] | |
| [ 2.725466] node 0: [mem 0x0000000100000000-0x00000003fbffffff] | |
| [ 2.726046] node 0: [mem 0x00000003fc500000-0x00000003ffefffff] | |
| [ 2.726623] Initmem setup node 0 [mem 0x0000000000200000-0x00000003ffefffff] | |
| [ 2.835147] On node 0, zone Normal: 256 pages in unavailable ranges | |
| [ 2.835317] psci: probing for conduit method from DT. | |
| [ 2.836363] psci: PSCIv1.1 detected in firmware. | |
| [ 2.836789] psci: Using standard PSCI v0.2 function IDs | |
| [ 2.837272] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 2.837716] psci: SMC Calling Convention v1.2 | |
| [ 2.838505] percpu: Embedded 31 pages/cpu s88680 r8192 d30104 u126976 | |
| [ 2.839317] Detected VIPT I-cache on CPU0 | |
| [ 2.839729] CPU features: detected: GIC system register CPU interface | |
| [ 2.840323] CPU features: detected: Virtualization Host Extensions | |
| [ 2.840896] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 2.841542] alternatives: patching kernel code | |
| [ 2.842285] Built 1 zonelists, mobility grouping on. Total pages: 4062220 | |
| [ 2.842921] Kernel command line: root=/dev/arm_nvme/root earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 console=tty1 loglevel=7 rootwait rw irqchip.gicv3_pseudo_nmi=0 switolb=1 | |
| [ 2.846173] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) | |
| [ 2.847657] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 2.848386] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 2.855018] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB) | |
| [ 2.999174] Memory: 15811896K/16506880K available (14144K kernel code, 3084K rwdata, 5636K rodata, 6080K init, 519K bss, 432840K reserved, 262144K cma-reserved) | |
| [ 3.000629] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 | |
| [ 3.001259] ftrace: allocating 55178 entries in 216 pages | |
| [ 3.089335] ftrace: allocated 216 pages with 4 groups | |
| [ 3.090084] rcu: Hierarchical RCU implementation. | |
| [ 3.090521] rcu: RCU event tracing is enabled. | |
| [ 3.090940] Rude variant of Tasks RCU enabled. | |
| [ 3.091358] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. | |
| [ 3.096944] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 3.100550] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 3.101034] GICv3: 480 SPIs implemented | |
| [ 3.101388] GICv3: 0 Extended SPIs implemented | |
| [ 3.101825] GICv3: Distributor has no Range Selector support | |
| [ 3.102352] GICv3: 16 PPIs implemented | |
| [ 3.102740] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 | |
| [ 3.103494] ITS [mem 0xfe640000-0xfe65ffff] | |
| [ 3.103928] ITS@0x00000000fe640000: allocated 8192 Devices @1001a0000 (indirect, esz 8, psz 64K, shr 0) | |
| [ 3.104810] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001b0000 (flat, esz 2, psz 64K, shr 0) | |
| [ 3.105763] ITS: using cache flushing for cmd queue | |
| [ 3.106246] ITS [mem 0xfe660000-0xfe67ffff] | |
| [ 3.106672] ITS@0x00000000fe660000: allocated 8192 Devices @1001d0000 (indirect, esz 8, psz 64K, shr 0) | |
| [ 3.107554] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @1001e0000 (flat, esz 2, psz 64K, shr 0) | |
| [ 3.108506] ITS: using cache flushing for cmd queue | |
| [ 3.109213] GICv3: using LPI property table @0x00000001001f0000 | |
| [ 3.109870] GIC: using cache flushing for LPI property table | |
| [ 3.110396] GICv3: CPU0: using allocated LPI pending table @0x0000000100200000 | |
| [ 3.111221] random: get_random_bytes called from start_kernel+0x3d8/0x5cc with crng_init=0 | |
| [ 3.237573] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 3.238879] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 3.239860] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 3.242093] Console: colour dummy device 80x25 | |
| [ 3.242504] printk: console [tty1] enabled | |
| [ 3.242885] printk: bootconsole [uart8250] disabled | |
| [ 2.399684] Booting Linux on physical CPU 0x0000000000 [0x412fd050] | |
| [ 2.399706] Linux version 5.10.66-custom+ (adam@rock5b) (gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP Wed Oct 26 07:41:27 UTC 2022 | |
| [ 2.410359] Machine model: Radxa ROCK 5B | |
| [ 2.410397] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '') | |
| [ 2.413085] printk: bootconsole [uart8250] enabled | |
| [ 2.413605] efi: UEFI not found. | |
| [ 2.417487] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB | |
| [ 2.418559] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB | |
| [ 2.419709] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB | |
| [ 2.420450] OF: reserved mem: initialized node cma, compatible id shared-dma-pool | |
| [ 2.722502] Zone ranges: | |
| [ 2.722748] DMA [mem 0x0000000000200000-0x00000000ffffffff] | |
| [ 2.723322] DMA32 empty | |
| [ 2.723591] Normal [mem 0x0000000100000000-0x00000003ffefffff] | |
| [ 2.724162] Movable zone start for each node | |
| [ 2.724556] Early memory node ranges | |
| [ 2.724887] node 0: [mem 0x0000000000200000-0x00000000efffffff] | |
| [ 2.725466] node 0: [mem 0x0000000100000000-0x00000003fbffffff] | |
| [ 2.726046] node 0: [mem 0x00000003fc500000-0x00000003ffefffff] | |
| [ 2.726623] Initmem setup node 0 [mem 0x0000000000200000-0x00000003ffefffff] | |
| [ 2.835147] On node 0, zone Normal: 256 pages in unavailable ranges | |
| [ 2.835317] psci: probing for conduit method from DT. | |
| [ 2.836363] psci: PSCIv1.1 detected in firmware. | |
| [ 2.836789] psci: Using standard PSCI v0.2 function IDs | |
| [ 2.837272] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 2.837716] psci: SMC Calling Convention v1.2 | |
| [ 2.838505] percpu: Embedded 31 pages/cpu s88680 r8192 d30104 u126976 | |
| [ 2.839317] Detected VIPT I-cache on CPU0 | |
| [ 2.839729] CPU features: detected: GIC system register CPU interface | |
| [ 2.840323] CPU features: detected: Virtualization Host Extensions | |
| [ 2.840896] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 2.841542] alternatives: patching kernel code | |
| [ 2.842285] Built 1 zonelists, mobility grouping on. Total pages: 4062220 | |
| [ 2.842921] Kernel command line: root=/dev/arm_nvme/root earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 console=tty1 loglevel=7 rootwait rw irqchip.gicv3_pseudo_nmi=0 switolb=1 | |
| [ 2.846173] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) | |
| [ 2.847657] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 2.848386] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 2.855018] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB) | |
| [ 2.999174] Memory: 15811896K/16506880K available (14144K kernel code, 3084K rwdata, 5636K rodata, 6080K init, 519K bss, 432840K reserved, 262144K cma-reserved) | |
| [ 3.000629] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 | |
| [ 3.001259] ftrace: allocating 55178 entries in 216 pages | |
| [ 3.089335] ftrace: allocated 216 pages with 4 groups | |
| [ 3.090084] rcu: Hierarchical RCU implementation. | |
| [ 3.090521] rcu: RCU event tracing is enabled. | |
| [ 3.090940] Rude variant of Tasks RCU enabled. | |
| [ 3.091358] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. | |
| [ 3.096944] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 3.100550] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 3.101034] GICv3: 480 SPIs implemented | |
| [ 3.101388] GICv3: 0 Extended SPIs implemented | |
| [ 3.101825] GICv3: Distributor has no Range Selector support | |
| [ 3.102352] GICv3: 16 PPIs implemented | |
| [ 3.102740] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 | |
| [ 3.103494] ITS [mem 0xfe640000-0xfe65ffff] | |
| [ 3.103928] ITS@0x00000000fe640000: allocated 8192 Devices @1001a0000 (indirect, esz 8, psz 64K, shr 0) | |
| [ 3.104810] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001b0000 (flat, esz 2, psz 64K, shr 0) | |
| [ 3.105763] ITS: using cache flushing for cmd queue | |
| [ 3.106246] ITS [mem 0xfe660000-0xfe67ffff] | |
| [ 3.106672] ITS@0x00000000fe660000: allocated 8192 Devices @1001d0000 (indirect, esz 8, psz 64K, shr 0) | |
| [ 3.107554] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @1001e0000 (flat, esz 2, psz 64K, shr 0) | |
| [ 3.108506] ITS: using cache flushing for cmd queue | |
| [ 3.109213] GICv3: using LPI property table @0x00000001001f0000 | |
| [ 3.109870] GIC: using cache flushing for LPI property table | |
| [ 3.110396] GICv3: CPU0: using allocated LPI pending table @0x0000000100200000 | |
| [ 3.111221] random: get_random_bytes called from start_kernel+0x3d8/0x5cc with crng_init=0 | |
| [ 3.237573] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 3.238879] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 3.239860] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 3.242093] Console: colour dummy device 80x25 | |
| [ 3.242504] printk: console [tty1] enabled | |
| [ 3.242885] printk: bootconsole [uart8250] disabled | |
| [ 3.243360] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) | |
| [ 3.243384] pid_max: default: 32768 minimum: 301 | |
| [ 3.243553] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 3.243598] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 3.245330] rcu: Hierarchical SRCU implementation. | |
| [ 3.246142] Platform MSI: msi-controller@fe640000 domain created | |
| [ 3.246171] Platform MSI: msi-controller@fe660000 domain created | |
| [ 3.246581] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created | |
| [ 3.246616] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created | |
| [ 3.246859] EFI services will not be available. | |
| [ 3.247204] smp: Bringing up secondary CPUs ... | |
| [ 3.247746] Detected VIPT I-cache on CPU1 | |
| [ 3.247781] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000 | |
| [ 3.247799] GICv3: CPU1: using allocated LPI pending table @0x0000000100210000 | |
| [ 3.247843] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] | |
| [ 3.248446] Detected VIPT I-cache on CPU2 | |
| [ 3.248475] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000 | |
| [ 3.248490] GICv3: CPU2: using allocated LPI pending table @0x0000000100220000 | |
| [ 3.248529] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] | |
| [ 3.249148] Detected VIPT I-cache on CPU3 | |
| [ 3.249174] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000 | |
| [ 3.249189] GICv3: CPU3: using allocated LPI pending table @0x0000000100230000 | |
| [ 3.249225] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] | |
| [ 3.249806] CPU features: detected: Spectre-v4 | |
| [ 3.249810] Detected PIPT I-cache on CPU4 | |
| [ 3.249824] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000 | |
| [ 3.249833] GICv3: CPU4: using allocated LPI pending table @0x0000000100240000 | |
| [ 3.249856] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0] | |
| [ 3.250381] Detected PIPT I-cache on CPU5 | |
| [ 3.250396] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000 | |
| [ 3.250406] GICv3: CPU5: using allocated LPI pending table @0x0000000100250000 | |
| [ 3.250429] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0] | |
| [ 3.250979] Detected PIPT I-cache on CPU6 | |
| [ 3.250993] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000 | |
| [ 3.251002] GICv3: CPU6: using allocated LPI pending table @0x0000000100260000 | |
| [ 3.251025] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0] | |
| [ 3.251553] Detected PIPT I-cache on CPU7 | |
| [ 3.251568] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000 | |
| [ 3.251577] GICv3: CPU7: using allocated LPI pending table @0x0000000100270000 | |
| [ 3.251600] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0] | |
| [ 3.251667] smp: Brought up 1 node, 8 CPUs | |
| [ 3.251952] SMP: Total of 8 processors activated. | |
| [ 3.251965] CPU features: detected: Privileged Access Never | |
| [ 3.251978] CPU features: detected: User Access Override | |
| [ 3.251992] CPU features: detected: 32-bit EL0 Support | |
| [ 3.252004] CPU features: detected: Common not Private translations | |
| [ 3.252018] CPU features: detected: RAS Extension Support | |
| [ 3.252030] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| [ 3.252047] CPU features: detected: CRC32 instructions | |
| [ 3.252060] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 3.252076] CPU features: detected: RCpc load-acquire (LDAPR) | |
| [ 3.252169] CPU: All CPU(s) started at EL2 | |
| [ 3.255310] devtmpfs: initialized | |
| [ 3.269372] Registered cp15_barrier emulation handler | |
| [ 3.269385] Registered setend emulation handler | |
| [ 3.269463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns | |
| [ 3.269475] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) | |
| [ 3.272109] pinctrl core: initialized pinctrl subsystem | |
| [ 3.272372] DMI not present or invalid. | |
| [ 3.272489] NET: Registered protocol family 16 | |
| [ 3.273264] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations | |
| [ 3.273445] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 3.274036] thermal_sys: Registered thermal governor 'fair_share' | |
| [ 3.274039] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 3.274045] thermal_sys: Registered thermal governor 'user_space' | |
| [ 3.274050] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 3.274189] thermal thermal_zone1: power_allocator: sustainable_power will be estimated | |
| [ 3.274227] thermal thermal_zone2: power_allocator: sustainable_power will be estimated | |
| [ 3.274268] thermal thermal_zone3: power_allocator: sustainable_power will be estimated | |
| [ 3.274301] thermal thermal_zone4: power_allocator: sustainable_power will be estimated | |
| [ 3.274334] thermal thermal_zone5: power_allocator: sustainable_power will be estimated | |
| [ 3.274368] thermal thermal_zone6: power_allocator: sustainable_power will be estimated | |
| [ 3.274391] cpuidle: using governor menu | |
| [ 3.274401] Registered FIQ tty driver | |
| [ 3.274553] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 3.274669] ASID allocator initialised with 65536 entries | |
| [ 3.276292] printk: console [ramoops-1] enabled | |
| [ 3.276299] pstore: Registered ramoops as persistent store backend | |
| [ 3.276305] ramoops: using 0xf0000@0x110000, ecc: 0 | |
| [ 3.321538] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000 | |
| [ 3.321762] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000 | |
| [ 3.321970] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000 | |
| [ 3.322212] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000 | |
| [ 3.322436] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000 | |
| [ 3.322485] rockchip-pinctrl pinctrl: probed pinctrl | |
| [ 3.335576] fiq_debugger fiq_debugger.0: IRQ fiq not found | |
| [ 3.335589] fiq_debugger fiq_debugger.0: IRQ wakeup not found | |
| [ 3.335596] fiq_debugger_probe: could not install nmi irq handler | |
| [ 3.335839] printk: console [ttyFIQ0] enabled | |
| [ 3.335931] Registered fiq debugger ttyFIQ0 | |
| [ 3.336251] vcc5v0_sys: supplied by vcc12v_dcin | |
| [ 3.336598] vcc_1v1_nldo_s3: supplied by vcc5v0_sys | |
| [ 3.336779] vcc5v0_host: supplied by vcc5v0_sys | |
| [ 3.336921] vcc3v3_pcie2x1l0: supplied by vcc5v0_sys | |
| [ 3.393512] vcc3v3_pcie30: supplied by vcc5v0_sys | |
| [ 3.393761] iommu: Default domain type: Translated | |
| [ 3.393839] rk_iommu fdab9000.iommu: version = 2 | |
| [ 3.394194] rk_iommu fdb50800.iommu: version = 2 | |
| [ 3.394430] rk_iommu fdb60f00.iommu: version = 2 | |
| [ 3.394610] rk_iommu fdb70f00.iommu: version = 2 | |
| [ 3.394775] rk_iommu fdb90480.iommu: version = 2 | |
| [ 3.394955] rk_iommu fdba0800.iommu: version = 2 | |
| [ 3.395136] rk_iommu fdba4800.iommu: version = 2 | |
| [ 3.395315] rk_iommu fdba8800.iommu: version = 2 | |
| [ 3.395498] rk_iommu fdbac800.iommu: version = 2 | |
| [ 3.395678] rk_iommu fdbb0800.iommu: version = 2 | |
| [ 3.395866] rk_iommu fdbdf000.iommu: version = 2 | |
| [ 3.396134] rk_iommu fdbef000.iommu: version = 2 | |
| [ 3.396410] rk_iommu fdc38700.iommu: version = 2 | |
| [ 3.396689] rk_iommu fdc48700.iommu: version = 2 | |
| [ 3.396830] rk_iommu fdd97e00.iommu: version = 2 | |
| [ 3.397128] SCSI subsystem initialized | |
| [ 3.397214] usbcore: registered new interface driver usbfs | |
| [ 3.397232] usbcore: registered new interface driver hub | |
| [ 3.397248] usbcore: registered new device driver usb | |
| [ 3.397287] mc: Linux media interface: v0.10 | |
| [ 3.397300] videodev: Linux video capture interface: v2.00 | |
| [ 3.397329] pps_core: LinuxPPS API ver. 1 registered | |
| [ 3.397334] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 3.397345] PTP clock support registered | |
| [ 3.397579] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. | |
| [ 3.397614] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 | |
| [ 3.398714] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 3.400208] rockchip-cpuinfo cpuinfo: SoC : 35880000 | |
| [ 3.400218] rockchip-cpuinfo cpuinfo: Serial : ec17aa0b9b01ec68 | |
| [ 3.400517] clocksource: Switched to clocksource arch_sys_counter | |
| [ 3.755091] VFS: Disk quotas dquot_6.6.0 | |
| [ 3.755131] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 3.759889] NET: Registered protocol family 2 | |
| [ 3.760059] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 3.763545] tcp_listen_portaddr_hash hash table entries: 8192 (order: 6, 327680 bytes, linear) | |
| [ 3.763707] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 3.764352] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 3.765067] TCP: Hash tables configured (established 131072 bind 65536) | |
| [ 3.765126] UDP hash table entries: 8192 (order: 7, 786432 bytes, linear) | |
| [ 3.765409] UDP-Lite hash table entries: 8192 (order: 7, 786432 bytes, linear) | |
| [ 3.765755] NET: Registered protocol family 1 | |
| [ 3.765948] RPC: Registered named UNIX socket transport module. | |
| [ 3.765955] RPC: Registered udp transport module. | |
| [ 3.765960] RPC: Registered tcp transport module. | |
| [ 3.765965] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 3.766363] PCI: CLS 0 bytes, default 64 | |
| [ 3.766674] Trying to unpack rootfs image as initramfs... | |
| [ 4.266965] Freeing initrd memory: 19936K | |
| [ 4.267737] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available | |
| [ 4.268255] kvm [1]: IPA Size Limit: 40 bits | |
| [ 4.268270] kvm [1]: GICv3: no GICV resource entry | |
| [ 4.268277] kvm [1]: disabling GICv2 emulation | |
| [ 4.268282] kvm [1]: GIC system register CPU interface enabled | |
| [ 4.268409] kvm [1]: vgic interrupt IRQ9 | |
| [ 4.268589] kvm [1]: VHE mode initialized successfully | |
| [ 4.270486] Initialise system trusted keyrings | |
| [ 4.270554] workingset: timestamp_bits=46 max_order=22 bucket_order=0 | |
| [ 4.273112] NFS: Registering the id_resolver key type | |
| [ 4.273131] Key type id_resolver registered | |
| [ 4.273137] Key type id_legacy registered | |
| [ 4.273174] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 4.273181] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 4.273196] ntfs: driver 2.1.32 [Flags: R/W]. | |
| [ 4.273633] NET: Registered protocol family 38 | |
| [ 4.273642] Key type asymmetric registered | |
| [ 4.273647] Asymmetric key parser 'x509' registered | |
| [ 4.273665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) | |
| [ 4.273672] io scheduler mq-deadline registered | |
| [ 4.273680] io scheduler kyber registered | |
| [ 4.281479] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success | |
| [ 4.281680] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success | |
| [ 4.284130] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node | |
| [ 4.284213] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node | |
| [ 4.284312] mpp_service mpp-srv: c71d300e428a author: Jianqun Xu 2022-06-22 video: rockchip: mpp: reset buffer members when release buffer | |
| [ 4.284324] mpp_service mpp-srv: probe start | |
| [ 4.285600] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1 | |
| [ 4.285815] mpp_vdpu2 fdb50400.vdpu: probe device | |
| [ 4.285931] mpp_vdpu2 fdb50400.vdpu: reset group is empty! | |
| [ 4.285938] vdpu_init:501: No aclk reset resource define | |
| [ 4.285945] mpp_vdpu2 fdb50400.vdpu: reset group is empty! | |
| [ 4.285951] vdpu_init:504: No hclk reset resource define | |
| [ 4.286035] mpp_vdpu2 fdb50400.vdpu: probing finish | |
| [ 4.286238] mpp_vepu2 jpege-ccu: probing start | |
| [ 4.286246] mpp_vepu2 jpege-ccu: probing finish | |
| [ 4.286368] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5 | |
| [ 4.286502] mpp_vepu2 fdba0000.jpege-core: probing start | |
| [ 4.286604] mpp_vepu2 fdba0000.jpege-core: attach ccu success | |
| [ 4.286683] mpp_vepu2 fdba0000.jpege-core: probing finish | |
| [ 4.286774] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6 | |
| [ 4.286929] mpp_vepu2 fdba4000.jpege-core: probing start | |
| [ 4.287029] mpp_vepu2 fdba4000.jpege-core: attach ccu success | |
| [ 4.287111] mpp_vepu2 fdba4000.jpege-core: probing finish | |
| [ 4.287210] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7 | |
| [ 4.287342] mpp_vepu2 fdba8000.jpege-core: probing start | |
| [ 4.287438] mpp_vepu2 fdba8000.jpege-core: attach ccu success | |
| [ 4.287518] mpp_vepu2 fdba8000.jpege-core: probing finish | |
| [ 4.287609] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8 | |
| [ 4.287742] mpp_vepu2 fdbac000.jpege-core: probing start | |
| [ 4.287836] mpp_vepu2 fdbac000.jpege-core: attach ccu success | |
| [ 4.287913] mpp_vepu2 fdbac000.jpege-core: probing finish | |
| [ 4.288178] mpp-iep2 fdbb0000.iep: Adding to iommu group 9 | |
| [ 4.288309] mpp-iep2 fdbb0000.iep: probe device | |
| [ 4.288422] mpp-iep2 fdbb0000.iep: allocate roi buffer failed | |
| [ 4.288492] mpp-iep2 fdbb0000.iep: probing finish | |
| [ 4.288695] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4 | |
| [ 4.288892] mpp_jpgdec fdb90000.jpegd: probe device | |
| [ 4.289070] mpp_jpgdec fdb90000.jpegd: probing finish | |
| [ 4.289409] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start | |
| [ 4.289474] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish | |
| [ 4.289638] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12 | |
| [ 4.289876] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start | |
| [ 4.289988] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found! | |
| [ 4.289995] rkvdec2_init:697: No niu aclk reset resource define | |
| [ 4.290003] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found! | |
| [ 4.290009] rkvdec2_init:700: No niu hclk reset resource define | |
| [ 4.290070] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001 | |
| [ 4.290077] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0 | |
| [ 4.290206] rk-pcie fe150000.pcie: missing legacy IRQ resource | |
| [ 4.290221] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000 | |
| [ 4.290233] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000 | |
| [ 4.290239] rk-pcie fe150000.pcie: IRQ msi not found | |
| [ 4.290244] rk-pcie fe150000.pcie: use outband MSI support | |
| [ 4.290249] rk-pcie fe150000.pcie: Missing *config* reg space | |
| [ 4.290256] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520 | |
| [ 4.290260] rk-pcie fe170000.pcie: missing legacy IRQ resource | |
| [ 4.290266] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges: | |
| [ 4.290274] rk-pcie fe170000.pcie: IRQ msi not found | |
| [ 4.290279] rk-pcie fe170000.pcie: use outband MSI support | |
| [ 4.290284] rk-pcie fe170000.pcie: Missing *config* reg space | |
| [ 4.290290] rk-pcie fe150000.pcie: err 0x00f0000000..0x00f00fffff -> 0x00f0000000 | |
| [ 4.290303] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges: | |
| [ 4.290305] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576 | |
| [ 4.290309] rk-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000 | |
| [ 4.290314] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512 | |
| [ 4.290330] rk-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000 | |
| [ 4.290343] rk-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000 | |
| [ 4.290351] rk-pcie fe170000.pcie: err 0x00f2000000..0x00f20fffff -> 0x00f2000000 | |
| [ 4.290367] rk-pcie fe170000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000 | |
| [ 4.290375] rk-pcie fe150000.pcie: Missing *config* reg space | |
| [ 4.290383] rk-pcie fe170000.pcie: MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000 | |
| [ 4.290394] rk-pcie fe170000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000 | |
| [ 4.290402] rk-pcie fe150000.pcie: invalid resource | |
| [ 4.290417] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish | |
| [ 4.290439] rk-pcie fe170000.pcie: Missing *config* reg space | |
| [ 4.290491] rk-pcie fe170000.pcie: invalid resource | |
| [ 4.290506] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13 | |
| [ 4.290745] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start | |
| [ 4.290858] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found! | |
| [ 4.290865] rkvdec2_init:697: No niu aclk reset resource define | |
| [ 4.290872] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found! | |
| [ 4.290879] rkvdec2_init:700: No niu hclk reset resource define | |
| [ 4.290928] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002 | |
| [ 4.290947] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1 | |
| [ 4.291110] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000 | |
| [ 4.291117] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000 | |
| [ 4.291124] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424 | |
| [ 4.291130] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576 | |
| [ 4.291137] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512 | |
| [ 4.291167] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish | |
| [ 4.291349] mpp_rkvenc2 rkvenc-ccu: probing start | |
| [ 4.291357] mpp_rkvenc2 rkvenc-ccu: probing finish | |
| [ 4.291477] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10 | |
| [ 4.291644] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start | |
| [ 4.291663] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8 | |
| [ 4.291805] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0 | |
| [ 4.291887] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish | |
| [ 4.291956] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11 | |
| [ 4.292173] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start | |
| [ 4.292192] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8 | |
| [ 4.292352] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1 | |
| [ 4.292439] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish | |
| [ 4.292731] mpp_av1dec: Adding child /av1d@fdc70000 | |
| [ 4.292942] mpp_av1dec: register device av1d-master | |
| [ 4.293142] mpp_av1dec av1d-master: probing start | |
| [ 4.293204] mpp_iommu_probe:405: failed to get device node | |
| [ 4.293211] mpp_av1dec av1d-master: failed to attach iommu | |
| [ 4.293339] mpp_av1dec av1d-master: probing finish | |
| [ 4.293376] mpp_service mpp-srv: probe success | |
| [ 4.300934] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 4.300949] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 | |
| [ 4.301847] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 4.301861] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 | |
| [ 4.302721] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| [ 4.302734] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 | |
| [ 4.303176] rockchip-pvtm fda40000.pvtm: pvtm@0 probed | |
| [ 4.303238] rockchip-pvtm fda50000.pvtm: pvtm@1 probed | |
| [ 4.303295] rockchip-pvtm fda60000.pvtm: pvtm@2 probed | |
| [ 4.303350] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed | |
| [ 4.303409] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed | |
| [ 4.304018] rockchip-system-monitor rockchip-system-monitor: system monitor probe | |
| [ 4.304798] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled | |
| [ 4.305346] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 83, base_baud = 1500000) is a 16550A | |
| [ 4.306480] random: fast init done | |
| [ 4.306539] random: crng init done | |
| [ 4.307414] rockchip-vop2 fdd90000.vop: Adding to iommu group 14 | |
| [ 4.314493] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2 | |
| [ 4.314511] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3 | |
| [ 4.314536] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8 | |
| [ 4.314549] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9 | |
| [ 4.314561] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2 | |
| [ 4.314571] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2 | |
| [ 4.314776] [drm] failed to init overlay plane Cluster0-win1 | |
| [ 4.314811] [drm] failed to init overlay plane Cluster1-win1 | |
| [ 4.314844] [drm] failed to init overlay plane Cluster2-win1 | |
| [ 4.314879] [drm] failed to init overlay plane Cluster3-win1 | |
| [ 4.325190] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010edfc40) | |
| [ 4.325768] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver | |
| [ 4.325952] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010ee7980) | |
| [ 4.326555] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver | |
| [ 4.326725] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010ee7980) | |
| [ 4.326790] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc010ee9c08) | |
| [ 4.327140] rockchip-drm display-subsystem: failed to parse loader memory | |
| [ 4.327231] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes | |
| [ 4.327310] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes | |
| [ 4.327337] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes | |
| [ 4.327785] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0 | |
| [ 4.334251] brd: module loaded | |
| [ 4.337232] loop: module loaded | |
| [ 4.337413] zram: Added device: zram0 | |
| [ 4.337560] lkdtm: No crash points registered, enable through debugfs | |
| [ 4.337709] system_heap: orders[0] = 6 | |
| [ 4.337717] system_heap: orders[1] = 4 | |
| [ 4.337723] system_heap: orders[2] = 0 | |
| [ 4.339883] rockchip-spi feb20000.spi: no high_speed pinctrl state | |
| [ 4.341251] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1 | |
| [ 4.341516] rk806 spi2.0: ON: 0x40 OFF:0x0 | |
| [ 4.343322] vdd_gpu_s0: supplied by vcc5v0_sys | |
| [ 4.344594] vdd_cpu_lit_s0: supplied by vcc5v0_sys | |
| [ 4.345263] vdd_log_s0: supplied by vcc5v0_sys | |
| [ 4.346016] vdd_vdenc_s0: supplied by vcc5v0_sys | |
| [ 4.346730] vdd_ddr_s0: supplied by vcc5v0_sys | |
| [ 4.347139] vdd2_ddr_s3: supplied by vcc5v0_sys | |
| [ 4.347748] vdd_2v0_pldo_s3: supplied by vcc5v0_sys | |
| [ 4.348301] vcc_3v3_s3: supplied by vcc5v0_sys | |
| [ 4.348831] vddq_ddr_s0: supplied by vcc5v0_sys | |
| [ 4.349448] vcc_1v8_s3: supplied by vcc5v0_sys | |
| [ 4.350072] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3 | |
| [ 4.350695] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3 | |
| [ 4.351234] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3 | |
| [ 4.351775] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3 | |
| [ 4.352313] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3 | |
| [ 4.352943] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3 | |
| [ 4.353617] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3 | |
| [ 4.354219] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3 | |
| [ 4.354952] vcc_3v3_s0: supplied by vcc5v0_sys | |
| [ 4.355490] vccio_sd_s0: supplied by vcc5v0_sys | |
| [ 4.356041] pldo6_s3: supplied by vcc5v0_sys | |
| [ 4.356556] rk806 spi2.0: no sleep-setting state | |
| [ 4.356566] rk806 spi2.0: no reset-setting pinctrl state | |
| [ 4.356574] rk806 spi2.0: no dvs-setting pinctrl state | |
| [ 4.360111] spi-nor spi5.0: mx25u12835f (16384 Kbytes) read_data x4 | |
| [ 4.360134] 1 fixed-partitions partitions found on MTD device sfc_nor | |
| [ 4.360143] Creating 1 MTD partitions on "sfc_nor": | |
| [ 4.360151] 0x000000000000-0x000001000000 : "loader" | |
| [ 4.361172] libphy: Fixed MDIO Bus: probed | |
| [ 4.362138] usbcore: registered new interface driver rndis_wlan | |
| [ 4.362163] usbcore: registered new interface driver asix | |
| [ 4.362187] usbcore: registered new interface driver cdc_ether | |
| [ 4.362206] usbcore: registered new interface driver rndis_host | |
| [ 4.362230] usbcore: registered new interface driver cdc_ncm | |
| [ 4.376297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 4.376314] ehci-pci: EHCI PCI platform driver | |
| [ 4.376343] ehci-platform: EHCI generic platform driver | |
| [ 4.378757] ehci-platform fc800000.usb: EHCI Host Controller | |
| [ 4.378778] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1 | |
| [ 4.378844] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000 | |
| [ 4.390531] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 4.390629] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
| [ 4.390641] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.390650] usb usb1: Product: EHCI Host Controller | |
| [ 4.390657] usb usb1: Manufacturer: Linux 5.10.66-custom+ ehci_hcd | |
| [ 4.390665] usb usb1: SerialNumber: fc800000.usb | |
| [ 4.390878] hub 1-0:1.0: USB hub found | |
| [ 4.390900] hub 1-0:1.0: 1 port detected | |
| [ 4.393432] ehci-platform fc880000.usb: EHCI Host Controller | |
| [ 4.393449] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2 | |
| [ 4.393508] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000 | |
| [ 4.403860] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 4.403948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
| [ 4.403959] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.403968] usb usb2: Product: EHCI Host Controller | |
| [ 4.403976] usb usb2: Manufacturer: Linux 5.10.66-custom+ ehci_hcd | |
| [ 4.403983] usb usb2: SerialNumber: fc880000.usb | |
| [ 4.404172] hub 2-0:1.0: USB hub found | |
| [ 4.404192] hub 2-0:1.0: 1 port detected | |
| [ 4.404516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 4.404538] ohci-platform: OHCI generic platform driver | |
| [ 4.404684] ohci-platform fc840000.usb: Generic Platform OHCI controller | |
| [ 4.404699] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3 | |
| [ 4.404749] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000 | |
| [ 4.464604] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 | |
| [ 4.464618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.464627] usb usb3: Product: Generic Platform OHCI controller | |
| [ 4.464635] usb usb3: Manufacturer: Linux 5.10.66-custom+ ohci_hcd | |
| [ 4.464642] usb usb3: SerialNumber: fc840000.usb | |
| [ 4.464833] hub 3-0:1.0: USB hub found | |
| [ 4.464853] hub 3-0:1.0: 1 port detected | |
| [ 4.465116] ohci-platform fc8c0000.usb: Generic Platform OHCI controller | |
| [ 4.465130] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4 | |
| [ 4.465180] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000 | |
| [ 4.495011] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x2 | |
| [ 4.498346] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.523880] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.524609] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 | |
| [ 4.524625] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.524634] usb usb4: Product: Generic Platform OHCI controller | |
| [ 4.524642] usb usb4: Manufacturer: Linux 5.10.66-custom+ ohci_hcd | |
| [ 4.524650] usb usb4: SerialNumber: fc8c0000.usb | |
| [ 4.524836] hub 4-0:1.0: USB hub found | |
| [ 4.524856] hub 4-0:1.0: 1 port detected | |
| [ 4.525432] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller | |
| [ 4.525448] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5 | |
| [ 4.525530] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 | |
| [ 4.525560] xhci-hcd xhci-hcd.10.auto: irq 126, io mem 0xfcd00000 | |
| [ 4.525696] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
| [ 4.525708] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.525716] usb usb5: Product: xHCI Host Controller | |
| [ 4.525724] usb usb5: Manufacturer: Linux 5.10.66-custom+ xhci-hcd | |
| [ 4.525732] usb usb5: SerialNumber: xhci-hcd.10.auto | |
| [ 4.525928] hub 5-0:1.0: USB hub found | |
| [ 4.525948] hub 5-0:1.0: 1 port detected | |
| [ 4.526086] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller | |
| [ 4.526098] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6 | |
| [ 4.526111] xhci-hcd xhci-hcd.10.auto: Host supports USB 3.0 SuperSpeed | |
| [ 4.526144] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 4.526198] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
| [ 4.526208] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.526217] usb usb6: Product: xHCI Host Controller | |
| [ 4.526225] usb usb6: Manufacturer: Linux 5.10.66-custom+ xhci-hcd | |
| [ 4.526232] usb usb6: SerialNumber: xhci-hcd.10.auto | |
| [ 4.526422] hub 6-0:1.0: USB hub found | |
| [ 4.526442] hub 6-0:1.0: 1 port detected | |
| [ 4.526659] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode | |
| [ 4.526670] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller | |
| [ 4.526682] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 7 | |
| [ 4.526772] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010 | |
| [ 4.526799] xhci-hcd xhci-hcd.11.auto: irq 127, io mem 0xfc400000 | |
| [ 4.526936] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 | |
| [ 4.526947] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.526956] usb usb7: Product: xHCI Host Controller | |
| [ 4.526963] usb usb7: Manufacturer: Linux 5.10.66-custom+ xhci-hcd | |
| [ 4.526971] usb usb7: SerialNumber: xhci-hcd.11.auto | |
| [ 4.527166] hub 7-0:1.0: USB hub found | |
| [ 4.527196] hub 7-0:1.0: 1 port detected | |
| [ 4.527331] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller | |
| [ 4.527343] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 8 | |
| [ 4.527356] xhci-hcd xhci-hcd.11.auto: Host supports USB 3.0 SuperSpeed | |
| [ 4.527392] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. | |
| [ 4.527448] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 | |
| [ 4.527458] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 4.527467] usb usb8: Product: xHCI Host Controller | |
| [ 4.527475] usb usb8: Manufacturer: Linux 5.10.66-custom+ xhci-hcd | |
| [ 4.527483] usb usb8: SerialNumber: xhci-hcd.11.auto | |
| [ 4.527668] hub 8-0:1.0: USB hub found | |
| [ 4.527687] hub 8-0:1.0: 1 port detected | |
| [ 4.527880] usbcore: registered new interface driver cdc_acm | |
| [ 4.527889] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
| [ 4.527986] usbcore: registered new interface driver uas | |
| [ 4.528061] usbcore: registered new interface driver usb-storage | |
| [ 4.528471] usbcore: registered new interface driver usbtouchscreen | |
| [ 4.529458] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.8.auto/input/input0 | |
| [ 4.529703] i2c /dev entries driver | |
| [ 4.533320] vdd_cpu_big0_s0: supplied by vcc5v0_sys | |
| [ 4.541891] vdd_cpu_big1_s0: supplied by vcc5v0_sys | |
| [ 4.550549] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.550919] vdd_npu_s0: supplied by vcc5v0_sys | |
| [ 4.573842] rtc-hym8563 6-0051: rtc information is invalid | |
| [ 4.577215] rk-pcie fe150000.pcie: PCIe Link up, LTSSM is 0x230011 | |
| [ 4.577226] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.577402] rk-pcie fe150000.pcie: PCI host bridge to bus 0000:00 | |
| [ 4.577433] pci_bus 0000:00: root bus resource [bus 00-0f] | |
| [ 4.577457] pci_bus 0000:00: root bus resource [??? 0xf0000000-0xf00fffff flags 0x0] | |
| [ 4.577486] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf0100000-0xf01fffff]) | |
| [ 4.577514] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff] | |
| [ 4.577537] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref] | |
| [ 4.577598] pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400 | |
| [ 4.577632] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff] | |
| [ 4.577659] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff] | |
| [ 4.577686] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] | |
| [ 4.577772] pci 0000:00:00.0: supports D1 D2 | |
| [ 4.577793] pci 0000:00:00.0: PME# supported from D0 D1 D3hot | |
| [ 4.580750] rtc-hym8563 6-0051: registered as rtc0 | |
| [ 4.581946] rtc-hym8563 6-0051: setting system clock to 2021-01-01T12:00:00 UTC (1609502400) | |
| [ 4.591783] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) | |
| [ 4.591929] pci 0000:01:00.0: [1d97:5216] type 00 class 0x010802 | |
| [ 4.592016] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] | |
| [ 4.592134] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] | |
| [ 4.595104] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA | |
| [ 4.595139] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4, wdt_cfg_bound_cpu:5 | |
| [ 4.595634] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0 | |
| [ 4.596479] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success | |
| [ 4.596504] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok! | |
| [ 4.596622] usbcore: registered new interface driver uvcvideo | |
| [ 4.596630] USB Video Class driver (1.1.1) | |
| [ 4.597847] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property | |
| [ 4.598362] rockchip-thermal fec00000.tsadc: tsadc is probed successfully! | |
| [ 4.598972] cpu cpu0: leakage=15 | |
| [ 4.600474] cpu cpu0: pvtm=1487 | |
| [ 4.600589] cpu cpu0: pvtm-volt-sel=4 | |
| [ 4.603948] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.614033] pci 0000:00:00.0: BAR 0: no space for [mem size 0x40000000] | |
| [ 4.614074] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x40000000] | |
| [ 4.614101] pci 0000:00:00.0: BAR 1: no space for [mem size 0x40000000] | |
| [ 4.614124] pci 0000:00:00.0: BAR 1: failed to assign [mem size 0x40000000] | |
| [ 4.614150] pci 0000:00:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff] | |
| [ 4.614172] cpu cpu4: leakage=12 | |
| [ 4.614177] pci 0000:00:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref] | |
| [ 4.614191] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0200000-0xf021ffff pref] | |
| [ 4.614201] pci 0000:01:00.0: BAR 0: assigned [mem 0xf0220000-0xf022ffff 64bit] | |
| [ 4.614238] pci 0000:00:00.0: PCI bridge to [bus 01-ff] | |
| [ 4.614265] pci 0000:00:00.0: bridge window [mem 0xf0200000-0xf02fffff] | |
| [ 4.617507] pcieport 0000:00:00.0: PME: Signaling with IRQ 140 | |
| [ 4.618012] nvme nvme0: pci function 0000:01:00.0 | |
| [ 4.618058] nvme 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 4.620770] cpu cpu4: pvtm=1730 | |
| [ 4.624781] cpu cpu4: pvtm-volt-sel=5 | |
| [ 4.626104] cpu cpu6: leakage=12 | |
| [ 4.630529] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.632618] cpu cpu6: pvtm=1734 | |
| [ 4.636549] cpu cpu6: pvtm-volt-sel=5 | |
| [ 4.638176] cpu cpu0: avs=0 | |
| [ 4.638881] cpu cpu4: avs=0 | |
| [ 4.639560] cpu cpu6: avs=0 | |
| [ 4.639796] cpu cpu0: EM: created perf domain | |
| [ 4.639843] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0 | |
| [ 4.640411] cpu cpu4: EM: created perf domain | |
| [ 4.640462] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0 | |
| [ 4.640563] usb 1-1: new high-speed USB device number 2 using ehci-platform | |
| [ 4.648934] cpu cpu6: EM: created perf domain | |
| [ 4.649366] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0 | |
| [ 4.660550] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.669543] sdhci: Secure Digital Host Controller Interface driver | |
| [ 4.669584] sdhci: Copyright(c) Pierre Ossman | |
| [ 4.669599] Synopsys Designware Multimedia Card Interface Driver | |
| [ 4.670652] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 4.671441] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode. | |
| [ 4.671480] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller. | |
| [ 4.671496] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a | |
| [ 4.671538] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 72,32 bit host data width,256 deep fifo | |
| [ 4.671634] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. | |
| [ 4.671670] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. | |
| [ 4.671686] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a | |
| [ 4.671723] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 71,32 bit host data width,256 deep fifo | |
| [ 4.673931] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 4.673986] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. | |
| [ 4.674052] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 4.675384] cryptodev: driver 1.12 loaded. | |
| [ 4.675451] hid: raw HID events driver (C) Jiri Kosina | |
| [ 4.675482] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq | |
| [ 4.675504] mmc_host mmc2: card is non-removable. | |
| [ 4.675743] usbcore: registered new interface driver usbhid | |
| [ 4.675762] usbhid: USB HID core driver | |
| [ 4.685910] optee: probing for conduit method. | |
| [ 4.685924] optee: api uid mismatch | |
| [ 4.685933] optee: probe of firmware:optee failed with error -22 | |
| [ 4.686050] rksfc_base v1.1 2016-01-08 | |
| [ 4.686520] usbcore: registered new interface driver snd-usb-audio | |
| [ 4.687456] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
| [ 4.690597] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.692160] debugfs: File 'Capture' in directory 'dapm' already present! | |
| [ 4.693394] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1 | |
| [ 4.693873] debugfs: File 'Capture' in directory 'dapm' already present! | |
| [ 4.694700] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card1/input2 | |
| [ 4.695415] Initializing XFRM netlink socket | |
| [ 4.695427] NET: Registered protocol family 17 | |
| [ 4.695453] [BT_RFKILL]: Enter rfkill_rk_init | |
| [ 4.695458] [WLAN_RFKILL]: Enter rfkill_wlan_init | |
| [ 4.695593] [WLAN_RFKILL]: Enter rfkill_wlan_probe | |
| [ 4.695609] [WLAN_RFKILL]: can't find rockchip,grf property | |
| [ 4.695614] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6256 | |
| [ 4.695619] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. | |
| [ 4.695625] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. | |
| [ 4.695643] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0. | |
| [ 4.695651] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! | |
| [ 4.695657] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio | |
| [ 4.695662] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1 | |
| [ 4.695667] [WLAN_RFKILL]: Exit rfkill_wlan_probe | |
| [ 4.695891] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 34. | |
| [ 4.695906] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 102. | |
| [ 4.695918] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 21. | |
| [ 4.695943] [BT_RFKILL]: Request irq for bt wakeup host | |
| [ 4.695976] [BT_RFKILL]: ** disable irq | |
| [ 4.696063] [BT_RFKILL]: bt_default device registered. | |
| [ 4.696109] Key type dns_resolver registered | |
| [ 4.696419] flash vendor_init_thread! | |
| [ 4.696440] flash vendor storage:20170308 ret = -1 | |
| [ 4.696832] registered taskstats version 1 | |
| [ 4.696841] Loading compiled-in X.509 certificates | |
| [ 4.696937] pstore: Using crash dump compression: deflate | |
| [ 4.697095] rga3_core0 fdb60000.rga: Adding to iommu group 2 | |
| [ 4.697241] rga: rga3_core0_irq, irq = 33, match scheduler | |
| [ 4.697523] rga: rga3_core0 driver loaded successfully ver:3.0.76831 | |
| [ 4.697551] rga: rga3_core0 probe successfully | |
| [ 4.697732] rga3_core1 fdb70000.rga: Adding to iommu group 3 | |
| [ 4.697847] rga: rga3_core1_irq, irq = 34, match scheduler | |
| [ 4.698128] rga: rga3_core1 driver loaded successfully ver:3.0.76831 | |
| [ 4.698140] rga: rga3_core1 probe successfully | |
| [ 4.698323] rga: rga2_irq, irq = 35, match scheduler | |
| [ 4.698619] rga: rga2 driver loaded successfully ver:3.2.63318 | |
| [ 4.698628] rga: rga2 probe successfully | |
| [ 4.698875] rga: Module initialized. v1.2.14 | |
| [ 4.703234] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) | |
| [ 4.713248] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA | |
| [ 4.714353] vcc3v3_pcie2x1l2: supplied by vcc_3v3_s3 | |
| [ 4.714448] mali fb000000.gpu: Kernel DDK version g12p0-01eac0 | |
| [ 4.715156] mali fb000000.gpu: leakage=20 | |
| [ 4.716509] rockchip-dmc dmc: leakage=46 | |
| [ 4.716529] rockchip-dmc dmc: leakage-volt-sel=2 | |
| [ 4.716537] mali fb000000.gpu: pvtm=891 | |
| [ 4.716562] mali fb000000.gpu: pvtm-volt-sel=4 | |
| [ 4.716839] mali fb000000.gpu: avs=0 | |
| [ 4.716984] rockchip-dmc dmc: avs=0 | |
| [ 4.717008] rockchip-dmc dmc: current ATF version 0x100 | |
| [ 4.717135] rockchip-dmc dmc: normal_rate = 1560000000 | |
| [ 4.717150] rockchip-dmc dmc: reboot_rate = 2112000000 | |
| [ 4.717164] rockchip-dmc dmc: suspend_rate = 528000000 | |
| [ 4.717196] rockchip-dmc dmc: video_4k_rate = 1560000000 | |
| [ 4.717211] rockchip-dmc dmc: video_4k_10b_rate = 1560000000 | |
| [ 4.717225] rockchip-dmc dmc: boost_rate = 2112000000 | |
| [ 4.717238] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000 | |
| [ 4.717253] rockchip-dmc dmc: performance_rate = 2112000000 | |
| [ 4.717271] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate | |
| [ 4.717277] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available. | |
| [ 4.717283] rockchip-dmc dmc: failed to get vop pn to msch rl | |
| [ 4.717302] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3 | |
| [ 4.717434] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0 | |
| [ 4.724140] mali fb000000.gpu: GPU hardware issue table may need updating: | |
| [ 4.724140] r0p0 status 5 is unknown; treating as r0p0 status 0 | |
| [ 4.724151] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0 | |
| [ 4.724185] mali fb000000.gpu: No priority control manager is configured | |
| [ 4.724192] mali fb000000.gpu: No memory group manager is configured | |
| [ 4.724207] mali fb000000.gpu: Protected memory allocator not available | |
| [ 4.724708] rockchip-dmc dmc: could not find power_model node | |
| [ 4.724972] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model' | |
| [ 4.724981] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0] | |
| [ 4.725178] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0] | |
| [ 4.725284] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0] | |
| [ 4.725392] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = '' | |
| [ 4.726963] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model | |
| [ 4.727088] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0 | |
| [ 4.730187] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) | |
| [ 4.731620] mali fb000000.gpu: Probed as mali0 | |
| [ 4.763978] nvme nvme0: Shutdown timeout set to 8 seconds | |
| [ 4.778023] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) | |
| [ 4.786956] nvme nvme0: allocated 64 MiB host memory buffer. | |
| [ 4.788486] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 | |
| [ 4.788554] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| [ 4.788575] usb 1-1: Product: USB 2.0 Hub | |
| [ 4.789624] hub 1-1:1.0: USB hub found | |
| [ 4.789833] hub 1-1:1.0: 4 ports detected | |
| [ 4.829629] mmc_host mmc2: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1) | |
| [ 4.866944] debugfs: File 'Left Hp mixer' in directory 'dapm' already present! | |
| [ 4.867040] debugfs: File 'Right Hp mixer' in directory 'dapm' already present! | |
| [ 4.867133] debugfs: File 'HPCP L' in directory 'dapm' already present! | |
| [ 4.867176] debugfs: File 'HPCP R' in directory 'dapm' already present! | |
| [ 4.867292] debugfs: File 'HPVOL L' in directory 'dapm' already present! | |
| [ 4.867333] debugfs: File 'HPVOL R' in directory 'dapm' already present! | |
| [ 4.874683] rk-pcie fe190000.pcie: invalid prsnt-gpios property in node | |
| [ 4.875441] rk-pcie fe190000.pcie: missing legacy IRQ resource | |
| [ 4.875486] rk-pcie fe190000.pcie: IRQ msi not found | |
| [ 4.875501] rk-pcie fe190000.pcie: use outband MSI support | |
| [ 4.875518] rk-pcie fe190000.pcie: Missing *config* reg space | |
| [ 4.875542] rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges: | |
| [ 4.875581] rk-pcie fe190000.pcie: err 0x00f4000000..0x00f40fffff -> 0x00f4000000 | |
| [ 4.875609] rk-pcie fe190000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000 | |
| [ 4.875641] rk-pcie fe190000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000 | |
| [ 4.875665] rk-pcie fe190000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000 | |
| [ 4.875718] rk-pcie fe190000.pcie: Missing *config* reg space | |
| [ 4.875764] rk-pcie fe190000.pcie: invalid resource | |
| [ 4.878027] rockchip_headset rk-headset: Can not read property hook_gpio | |
| [ 4.878120] rockchip_headset rk-headset: headset have hook adc mode | |
| [ 4.878337] input: rk-headset as /devices/platform/rk-headset/input/input3 | |
| [ 4.879909] RKNPU fdab0000.npu: Adding to iommu group 0 | |
| [ 4.880197] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode | |
| [ 4.881992] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff] | |
| [ 4.882042] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff] | |
| [ 4.882088] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff] | |
| [ 4.883214] [drm] Initialized rknpu 0.7.2 20220428 for fdab0000.npu on minor 1 | |
| [ 4.886292] RKNPU fdab0000.npu: leakage=11 | |
| [ 4.888766] nvme nvme0: 8/0/0 default/read/poll queues | |
| [ 4.891398] nvme0n1: p1 p2 | |
| [ 4.894226] RKNPU fdab0000.npu: pvtm=894 | |
| [ 4.898921] RKNPU fdab0000.npu: pvtm-volt-sel=4 | |
| [ 4.900207] RKNPU fdab0000.npu: avs=0 | |
| [ 4.900630] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0 | |
| [ 4.909625] RKNPU fdab0000.npu: failed to find power_model node | |
| [ 4.909677] RKNPU fdab0000.npu: RKNPU: failed to initialize power model | |
| [ 4.909707] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient | |
| [ 4.911431] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 4.929678] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 4.930609] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
| [ 4.930648] cfg80211: failed to load regulatory.db | |
| [ 4.932596] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '00:57:31', on 'Oct 27 2022'. | |
| [ 4.932973] Mali: | |
| [ 4.932976] Mali device driver loaded | |
| [ 4.932994] ALSA device list: | |
| [ 4.933004] #0: rockchip-hdmi0 | |
| [ 4.933012] #1: rockchip-hdmi1 | |
| [ 4.933022] #2: rockchip-es8316 | |
| [ 4.933031] #3: rockchip,hdmiin | |
| [ 4.938649] Freeing unused kernel memory: 6080K | |
| [ 4.967466] Run /init as init process | |
| [ 5.137238] rk-pcie fe190000.pcie: PCIe Link up, LTSSM is 0x130011 | |
| [ 5.137520] rk-pcie fe190000.pcie: PCI host bridge to bus 0004:40 | |
| [ 5.137545] pci_bus 0004:40: root bus resource [bus 40-4f] | |
| [ 5.137559] pci_bus 0004:40: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0] | |
| [ 5.137577] pci_bus 0004:40: root bus resource [io 0x200000-0x2fffff] (bus address [0xf4100000-0xf41fffff]) | |
| [ 5.137594] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff] | |
| [ 5.137607] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff pref] | |
| [ 5.137658] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400 | |
| [ 5.137689] pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] | |
| [ 5.137759] pci 0004:40:00.0: supports D1 D2 | |
| [ 5.137772] pci 0004:40:00.0: PME# supported from D0 D1 D3hot | |
| [ 5.146901] pci 0004:40:00.0: Primary bus is hard wired to 0 | |
| [ 5.146943] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring | |
| [ 5.147248] pci 0004:41:00.0: [10ec:8125] type 00 class 0x020000 | |
| [ 5.147316] pci 0004:41:00.0: reg 0x10: [io 0x0000-0x00ff] | |
| [ 5.147384] pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] | |
| [ 5.147432] pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] | |
| [ 5.147802] pci 0004:41:00.0: supports D1 D2 | |
| [ 5.147816] pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| [ 5.164557] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41 | |
| [ 5.164620] pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff] | |
| [ 5.164638] pci 0004:40:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref] | |
| [ 5.164657] pci 0004:40:00.0: BAR 7: assigned [io 0x200000-0x200fff] | |
| [ 5.164675] pci 0004:41:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit] | |
| [ 5.164722] pci 0004:41:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit] | |
| [ 5.164764] pci 0004:41:00.0: BAR 0: assigned [io 0x200000-0x2000ff] | |
| [ 5.164788] pci 0004:40:00.0: PCI bridge to [bus 41] | |
| [ 5.164802] pci 0004:40:00.0: bridge window [io 0x200000-0x200fff] | |
| [ 5.164816] pci 0004:40:00.0: bridge window [mem 0xf4200000-0xf42fffff] | |
| [ 5.167400] pcieport 0004:40:00.0: PME: Signaling with IRQ 161 | |
| [ 5.392536] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com | |
| [ 5.584601] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 5.694959] systemd[1]: System time before build time, advancing clock. | |
| [ 5.755002] NET: Registered protocol family 10 | |
| [ 5.756079] Segment Routing with IPv6 | |
| [ 5.774718] systemd[1]: systemd 251.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) | |
| [ 5.774884] systemd[1]: Detected architecture arm64. | |
| [ 5.776054] systemd[1]: Hostname set to <rock5b>. | |
| [ 5.937129] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 5.938545] systemd[1]: Created slice Slice /system/getty. | |
| [ 5.939155] systemd[1]: Created slice Slice /system/modprobe. | |
| [ 5.939710] systemd[1]: Created slice Slice /system/serial-getty. | |
| [ 5.940049] systemd[1]: Created slice User and Session Slice. | |
| [ 5.940202] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ 5.940321] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ 5.940640] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
| [ 5.940747] systemd[1]: Reached target Local Encrypted Volumes. | |
| [ 5.940808] systemd[1]: Reached target Local Integrity Protected Volumes. | |
| [ 5.940879] systemd[1]: Reached target Path Units. | |
| [ 5.940928] systemd[1]: Reached target Remote File Systems. | |
| [ 5.940977] systemd[1]: Reached target Slice Units. | |
| [ 5.941046] systemd[1]: Reached target Local Verity Protected Volumes. | |
| [ 5.941189] systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
| [ 5.941724] systemd[1]: Listening on LVM2 poll daemon socket. | |
| [ 5.943366] systemd[1]: Listening on Process Core Dump Socket. | |
| [ 5.949660] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit). | |
| [ 5.950315] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ 5.950552] systemd[1]: Listening on Journal Socket. | |
| [ 5.950769] systemd[1]: Listening on Network Service Netlink Socket. | |
| [ 5.950967] systemd[1]: Listening on udev Control Socket. | |
| [ 5.951104] systemd[1]: Listening on udev Kernel Socket. | |
| [ 5.951286] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages). | |
| [ 5.952515] systemd[1]: Mounting POSIX Message Queue File System... | |
| [ 5.953812] systemd[1]: Mounting Kernel Debug File System... | |
| [ 5.955325] systemd[1]: Mounting Kernel Trace File System... | |
| [ 5.957036] systemd[1]: Starting Create List of Static Device Nodes... | |
| [ 5.958729] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... | |
| [ 5.960739] systemd[1]: Starting Load Kernel Module configfs... | |
| [ 5.962715] systemd[1]: Starting Load Kernel Module drm... | |
| [ 5.964744] systemd[1]: Starting Load Kernel Module fuse... | |
| [ 5.965394] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. | |
| [ 5.965414] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) | |
| [ 5.966919] systemd[1]: Starting Journal Service... | |
| [ 5.968114] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed. | |
| [ 5.969581] systemd[1]: Starting Generate network units from Kernel command line... | |
| [ 5.971178] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| [ 5.971421] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. | |
| [ 5.972900] systemd[1]: Starting Apply Kernel Variables... | |
| [ 5.974789] systemd[1]: Starting Coldplug All udev Devices... | |
| [ 5.977995] systemd[1]: Mounted POSIX Message Queue File System. | |
| [ 5.978623] systemd[1]: Mounted Kernel Debug File System. | |
| [ 5.978983] systemd[1]: Mounted Kernel Trace File System. | |
| [ 5.979639] systemd[1]: Finished Create List of Static Device Nodes. | |
| [ 5.983457] systemd[1]: modprobe@configfs.service: Deactivated successfully. | |
| [ 5.983764] systemd[1]: Finished Load Kernel Module configfs. | |
| [ 5.984605] systemd[1]: modprobe@drm.service: Deactivated successfully. | |
| [ 5.984842] systemd[1]: Finished Load Kernel Module drm. | |
| [ 5.985103] fuse: init (API version 7.32) | |
| [ 5.986986] systemd[1]: Mounting Kernel Configuration File System... | |
| [ 5.988131] systemd[1]: modprobe@fuse.service: Deactivated successfully. | |
| [ 5.988676] systemd[1]: Finished Load Kernel Module fuse. | |
| [ 5.989827] systemd[1]: Finished Generate network units from Kernel command line. | |
| [ 5.990611] systemd[1]: Finished Remount Root and Kernel File Systems. | |
| [ 5.991002] systemd[1]: Reached target Preparation for Network. | |
| [ 5.992385] systemd[1]: Mounting FUSE Control File System... | |
| [ 5.992603] systemd[1]: First Boot Wizard was skipped because of a failed condition check (ConditionFirstBoot=yes). | |
| [ 5.993571] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). | |
| [ 5.995188] systemd[1]: Starting Load/Save Random Seed... | |
| [ 5.995475] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). | |
| [ 5.997279] systemd[1]: Starting Create Static Device Nodes in /dev... | |
| [ 5.998928] systemd[1]: Finished Apply Kernel Variables. | |
| [ 5.999341] systemd[1]: Mounted Kernel Configuration File System. | |
| [ 5.999565] systemd[1]: Mounted FUSE Control File System. | |
| [ 6.004040] systemd[1]: Finished Load/Save Random Seed. | |
| [ 6.004341] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes). | |
| [ 6.054846] systemd[1]: Finished Create Static Device Nodes in /dev. | |
| [ 6.056469] systemd[1]: Starting Rule-based Manager for Device Events and Files... | |
| [ 6.063215] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. | |
| [ 6.063493] systemd[1]: Reached target Preparation for Local File Systems. | |
| [ 6.063607] systemd[1]: Virtual Machine and Container Storage (Compatibility) was skipped because of a failed condition check (ConditionPathExists=/var/lib/machines.raw). | |
| [ 6.069276] systemd[1]: Started Journal Service. | |
| [ 6.086432] systemd-journald[325]: Received client request to flush runtime journal. | |
| [ 6.087634] systemd-journald[325]: File /var/log/journal/4e28f1bb51f14206b204ffbcf75c9acd/system.journal corrupted or uncleanly shut down, renaming and replacing. | |
| [ 6.232170] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 6.243909] Adding 4194300k swap on /dev/mapper/arm_nvme-swap. Priority:-2 extents:1 across:4194300k SS | |
| [ 6.293592] r8125 2.5Gigabit Ethernet driver 9.009.00-NAPI-RSS loaded | |
| [ 6.293672] r8125 0004:41:00.0: enabling device (0000 -> 0003) | |
| [ 6.311370] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. | |
| [ 6.314447] r8125 Copyright (C) 2022 Realtek NIC software team <nicfae@realtek.com> | |
| [ 6.314447] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. | |
| [ 6.314447] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. | |
| [ 6.346168] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! | |
| [ 6.369490] [BT_RFKILL]: bt shut off power | |
| [ 6.373591] r8125 0004:41:00.0 enP4p65s0: renamed from eth0 | |
| [ 6.431763] enP4p65s0: 0xffffffc014f90000, 00:e0:4c:68:00:05, IRQ 152 | |
| [ 6.694852] ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2 | |
| [ 6.715179] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add | |
| [ 7.210835] rk-pcie fe170000.pcie: PCIe Link Fail | |
| [ 7.210974] rk-pcie fe170000.pcie: failed to initialize host | |
| Arch Linux 5.10.66-custom+ (ttyFIQ0) | |
| rock5b login: [ 7.800765] vendor storage:20190527 ret = -1 | |
| [ 10.979406] r8125: enP4p65s0: link up | |
| [ 10.979746] IPv6: ADDRCONF(NETDEV_CHANGE): enP4p65s0: link becomes ready |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment