Extended+Ender-3+Pro_settings.inst.cfg

[general]
version = 4
name = Extended Ender-3 Pro_settings
definition = creality_ender3

[metadata]
setting_version = 11
type = definition_changes

[values]
machine_disallowed_areas = 
machine_depth = 394
machine_height = 500
machine_start_gcode = M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
	M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
	M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
	M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
	M220 S100 ;Reset Feedrate
	M221 S100 ;Reset Flowrate
	
	G29 L0; Load mesh 0
	G29 A; Activate UBL
	G28 ;Home
	
	
	G92 E0 ;Reset Extruder
	G1 Z2.0 F3000 ;Move Z Axis up
	G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
	G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
	G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
	G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
	G92 E0 ;Reset Extruder
	G1 Z2.0 F3000 ;Move Z Axis up
machine_width = 390