-
-
Save adaugherity/7435890 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/usr/bin/ruby | |
# Create display override file to force Mac OS X to use RGB mode for Display | |
# see http://embdev.net/topic/284710 | |
require 'base64' | |
data=`ioreg -l -d0 -w 0 -r -c AppleDisplay` | |
edids=data.scan(/IODisplayEDID.*?<([a-z0-9]+)>/i).flatten | |
vendorids=data.scan(/DisplayVendorID.*?([0-9]+)/i).flatten | |
productids=data.scan(/DisplayProductID.*?([0-9]+)/i).flatten | |
displays = [] | |
edids.each_with_index do |edid, i| | |
disp = { "edid_hex"=>edid, "vendorid"=>vendorids[i].to_i, "productid"=>productids[i].to_i } | |
displays.push(disp) | |
end | |
# Process all displays | |
if displays.length > 1 | |
puts "Found %d displays! You should only install the override file for the one which" % displays.length | |
puts "is giving you problems.","\n" | |
elsif displays.length == 0 | |
puts "No display data found! Are any external displays connected?" | |
puts "\nNote: Apple Silicon (arm64) devices are currently unsupported, as the standard" | |
puts "method of retrieving display information does not work." | |
end | |
displays.each do |disp| | |
# Retrieve monitor model from EDID display descriptor | |
i = disp["edid_hex"].index('000000fc00') | |
if i.nil? | |
monitor_name = "Display" | |
else | |
# The monitor name is stored in (up to) 13 bytes of text following 00 00 00 fc 00. | |
# If the name is shorter than 13 bytes, it is terminated with a newline (0a) and then padded with spaces. | |
monitor_name = [disp["edid_hex"][i + 10, 26].to_s].pack("H*") | |
monitor_name.rstrip! # remove trailing newline/spaces | |
end | |
puts "Found display '#{monitor_name}': vendor ID=#{disp["vendorid"]} (0x%x), product ID=#{disp["productid"]} (0x%x)" % | |
[disp["vendorid"], disp["productid"]] | |
puts "Raw EDID data:\n#{disp["edid_hex"]}" | |
bytes=disp["edid_hex"].scan(/../).map{|x|Integer("0x#{x}")}.flatten | |
puts "Setting color support to RGB 4:4:4 only" | |
bytes[24] &= ~(0b11000) | |
puts "Number of extension blocks: #{bytes[126]}" | |
puts "removing extension block" | |
bytes = bytes[0..127] | |
bytes[126] = 0 | |
bytes[127] = (0x100-(bytes[0..126].reduce(:+) % 256)) % 256 | |
puts | |
puts "Recalculated checksum: 0x%x" % bytes[127] | |
puts "new EDID:\n#{bytes.map{|b|"%02X"%b}.join}" | |
Dir.mkdir("DisplayVendorID-%x" % disp["vendorid"]) rescue nil | |
filename = "DisplayVendorID-%x/DisplayProductID-%x" % [disp["vendorid"], disp["productid"]] | |
puts "Output file: #{Dir.pwd}/#{filename}" | |
f = File.open(filename, 'w') | |
f.write '<?xml version="1.0" encoding="UTF-8"?> | |
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> | |
<plist version="1.0">' | |
f.write " | |
<dict> | |
<key>DisplayProductName</key> | |
<string>#{monitor_name} - forced RGB mode (EDID override)</string> | |
<key>IODisplayEDID</key> | |
<data>#{Base64.encode64(bytes.pack('C*'))}</data> | |
<key>DisplayVendorID</key> | |
<integer>#{disp["vendorid"]}</integer> | |
<key>DisplayProductID</key> | |
<integer>#{disp["productid"]}</integer> | |
</dict> | |
</plist>" | |
f.close | |
puts "\n" | |
end # displays.each |
It worked after I used a display port connection.... Thank you!
…On Sun, Oct 15, 2023 at 8:24 AM joevt ***@***.***> wrote:
***@***.**** commented on this gist.
------------------------------
@anbarae <https://github.com/anbarae> What display? Is it HDMI or
DisplayPort connection? Try SwitchResX? Run AllRez to get a list of display
modes.
—
Reply to this email directly, view it on GitHub
<https://gist.github.com/adaugherity/7435890#gistcomment-4725692> or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/BDIWPQYXP2HEQOZOO4QVDILX7N6TFBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFQKSXMYLMOVS2I5DSOVS2I3TBNVS3W5DIOJSWCZC7OBQXE5DJMNUXAYLOORPWCY3UNF3GS5DZVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFU43TIMZVHA4TBJ3UOJUWOZ3FOKTGG4TFMF2GK>
.
You are receiving this email because you were mentioned.
Triage notifications on the go with GitHub Mobile for iOS
<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675>
or Android
<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>
.
I have 2 external HDMI-to-usbc monitors. The override works and I can see it take effect in Settings > Displays, but when i rearrange the monitors in Display settings, one of the monitors gets blurry again. Anyone run into this?
Well I tried it in my M1 pro ti try to make de external monitor colors look better, and now my macbook screens says it is 1512 x 982 resolution, and if i try to increase it does not look good, also I lost some screen opions for the same macbook screen, and I just runned the script. Y can check in the imagems the light theme shows how it used to be and the dark how it is now.
@MikaelDDavidd This solution works on x86 based Macs. It's not meant for M1 based Macs, as they ignore the EDID override.
You can delete the override file you have created, reboot and it should be back to default.
If possible, try using an USB-C to DisplayPort port cable on the M1 Pro
Any way to make this work with BetterDisplay? It also works on Silicon-based Macs.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Works for Sonoma on a 2016 Macbook Pro 👌