Last active
October 4, 2023 12:42
-
-
Save adlerweb/807aee4a79a8dee043113d86172e7792 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#include <ESP8266WiFi.h> | |
#include <ESP8266mDNS.h> | |
#include <PubSubClient.h> | |
const char* cfg_wifi_ssid = "freifunk-myk.de"; | |
const char* cfg_wifi_pwd = ""; | |
const char* mqtt_server = "deinserver.local"; | |
const unsigned int mqtt_port = 1883; | |
const char* mqtt_user = "admin"; | |
const char* mqtt_pass = "test123"; | |
//echo | openssl s_client -connect localhost:1883 | openssl x509 -fingerprint -noout | |
const char* mqtt_fprint = "D9:B2:A5:BB:E1:E5:4D:50:23:E1:84:24:29:44:BA:7C:54:01:BB:08"; | |
WiFiClientSecure espClient; | |
PubSubClient client(espClient); | |
void setup() { | |
// put your setup code here, to run once: | |
Serial.begin(115200); | |
Serial.println("TestMQTT"); | |
WiFi.mode(WIFI_STA); | |
WiFi.begin(cfg_wifi_ssid, cfg_wifi_pwd); | |
while (WiFi.status() != WL_CONNECTED) { | |
delay(500); | |
Serial.print("."); | |
} | |
Serial.println(""); | |
Serial.println("WiFi connected"); | |
Serial.println("IP address: "); | |
Serial.println(WiFi.localIP()); | |
espClient.setFingerprint(mqtt_fprint); | |
client.setServer(mqtt_server, mqtt_port); | |
client.setCallback(callback); | |
while (!client.connected()) { | |
Serial.print("Attempting MQTT connection..."); | |
verifyFingerprint(); | |
if (client.connect(WiFi.macAddress().c_str(), mqtt_user, mqtt_pass)) { | |
Serial.println("connected"); | |
client.subscribe("/foo"); | |
}else{ | |
Serial.print("failed, rc="); | |
Serial.print(client.state()); | |
Serial.println(" try again in 5 seconds"); | |
// Wait 5 seconds before retrying | |
delay(5000); | |
} | |
} | |
} | |
void callback(char* topic, byte* payload, unsigned int length) { | |
Serial.print("Message arrived ["); | |
Serial.print(topic); | |
Serial.print("] "); | |
char message[length + 1]; | |
for (int i = 0; i < length; i++) { | |
message[i] = (char)payload[i]; | |
} | |
message[length] = '\0'; | |
Serial.println(message); | |
} | |
void verifyFingerprint() { | |
if(client.connected() || espClient.connected()) return; //Already connected | |
Serial.print("Checking TLS @ "); | |
Serial.print(mqtt_server); | |
Serial.print("..."); | |
if (!espClient.connect(mqtt_server, mqtt_port)) { | |
Serial.println("Connection failed. Rebooting."); | |
Serial.flush(); | |
ESP.restart(); | |
} | |
if (espClient.verify(mqtt_fprint, mqtt_server)) { | |
Serial.print("Connection secure -> ."); | |
} else { | |
Serial.println("Connection insecure! Rebooting."); | |
Serial.flush(); | |
ESP.restart(); | |
} | |
espClient.stop(); | |
delay(100); | |
} | |
unsigned int counter = 0; | |
void loop() { | |
// put your main code here, to run repeatedly: | |
client.loop(); | |
char buf[12]; | |
itoa(counter, buf, 11); | |
client.publish("/test", buf); | |
counter++; | |
delay(1000); | |
} |
Probier mal
espClient.setFingerprint(mqtt_fprint);
unterclient.setServer(mqtt_server, mqtt_port);
(Zeile 38) zu ergänzen. Das war alles was ich machen musste dass es funktioniert. Danke an: https://www.reddit.com/user/pointdexter33/ der mir dabei weiter geholfen hatte.
Hm, scheint durch ein Update neu zu sein, dass hatte der früher™ automatisch gemacht. Habe es oben mal ergänzt, danke für den Hinweis.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
@JST2018 Dein Kommentar ist zwar schon etwas älter, aber vielleicht ist es auch für andere interessant:
Probier mal
espClient.setFingerprint(mqtt_fprint);
unterclient.setServer(mqtt_server, mqtt_port);
(Zeile 38) zu ergänzen. Das war alles was ich machen musste dass es funktioniert. Danke an: https://www.reddit.com/user/pointdexter33/ der mir dabei weiter geholfen hatte.