Skip to content

Instantly share code, notes, and snippets.

@adukot

adukot/RK3038 USB Stick

Created October 26, 2014 12:53
Show Gist options
  • Save adukot/ca8f1334a4132fa87eae to your computer and use it in GitHub Desktop.
Save adukot/ca8f1334a4132fa87eae to your computer and use it in GitHub Desktop.
Download ZIP
Raw
RK3038 USB Stick
DDR Version 1.00 20121017
In
DDR3
freq
300MHz
config state
pctl
phy
mem
DX0DQSTR:3DB04001
DX1DQSTR:3DB04001
DX2DQSTR:3DB04001
DX3DQSTR:3DB04001
acc
ok
bus width=32 col=10 bank=8 row=15 CS=1 size=1024MB
ok OUT
BUILD=====4
GetRemapTbl flag = 0
OK! 91218
unsigned!
SecureBootEn = 0
Boot ver: 2012-12-07#1.22
start_linux=====105461
2576957 Starting kernel...@0x60408000
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.36+ (jeffchou@chipsip.com) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 22 12:15:11 CST 2013
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: RK30board
[ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
[ 0.000000] memory reserve: Memory(base:0x90c00000 size:12M) reserved for <fb0 buf>
[ 0.000000] memory reserve: Total reserved 92M
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] CPU SRAM: copied sram code from c0b35000 to fef00010 - fef01a70
[ 0.000000] CPU SRAM: copied sram data from c0b36a60 to fef01a70 - fef02184
[ 0.000000] sram_log: : <W 24 n n \ B_ > 2 DV % 6Y DX k o ('E
[ 0.000000] rk30_dvfs_init
[ 0.000000] L310 cache controller enabled
[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
[ 0.000000] DDR DEBUG: version 1.00 20130130
[ 0.000000] DDR DEBUG: DDR3 Device
[ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[ 0.000000] DDR DEBUG: init success!!! freq=300MHz
[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.000000] rk30_iomux_init
[ 0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1de6000 s6976 r8192 d13504 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 236544
[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00280000 mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x000C0000@0x00018000(backup),0x00040000@0x000D8000(cache),0x00100000@0x00118000(userdata),0x00002000@0x00218000(kpanic),0x00100000@0x0021A000(system),-@0x0033A000(user) bootver=2012-12-07#1.22 firmware_ver=4.1.1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 780MB 152MB = 932MB total
[ 0.000000] Memory: 924432k/924432k available, 124144k reserved, 155648K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0408000 - 0xc0433000 ( 172 kB)
[ 0.000000] .text : 0xc0433000 - 0xc0ac69bc (6735 kB)
[ 0.000000] .data : 0xc0ac8000 - 0xc0b34d28 ( 436 kB)
[ 0.000000] .bss : 0xc0b38024 - 0xc15ddab0 (10903 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:448
[ 0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.004938] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
[ 0.013788] pid_max: default: 32768 minimum: 301
[ 0.018987] Mount-cache hash table entries: 512
[ 0.024384] Initializing cgroup subsys debug
[ 0.028991] Initializing cgroup subsys cpuacct
[ 0.033847] Initializing cgroup subsys freezer
[ 0.038757] CPU: Testing write buffer coherency: ok
[ 0.144798] CPU1: Booted secondary processor
[ 0.144837] Brought up 2 CPUs
[ 0.152657] SMP: Total of 2 processors activated (3262.93 BogoMIPS).
[ 0.159798] devtmpfs: initialized
[ 0.170901] NET: Registered protocol family 16
[ 0.175814] last_log: 0xf0500000 map to 0xf7004000 and copy to 0xc0b3c280 (version 2.1)
[ 0.207692] lcdc0 is used as primary display device contoller!
[ 0.214190] warning:lcdc1 not add to system!
[ 0.319223] rk29sdk_wifi_bt_gpio_control_init: init finished
<hit enter to activate fiq debugger>
0.326897] console [ttyFIQ0] enabled, bootconsole disabled
[ 0.326897] console [ttyFIQ0] enabled, bootconsole disabled
[ 0.335944] Registered FIQ tty driver f0495c00
[ 0.347862] bio: create slab <bio-0> at 0
[ 0.352275] SCSI subsystem initialized
[ 0.352475] usbcore: registered new interface driver usbfs
[ 0.352582] usbcore: registered new interface driver hub
[ 0.366849] usbcore: registered new device driver usb
[ 0.367088] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
[ 0.367282] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
[ 0.367414] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
[ 0.367551] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
[ 0.367681] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
[ 0.398425] rk30-adc rk30-adc: rk30 adc: driver initialized
[ 0.398657] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.399087] Bluetooth: Core ver 2.16
[ 0.399153] NET: Registered protocol family 31
[ 0.399186] Bluetooth: HCI device and connection manager initialized
[ 0.399232] Bluetooth: HCI socket layer initialized
[ 0.399267] Bluetooth: L2CAP socket layer initialized
[ 0.399316] Bluetooth: SCO socket layer initialized
[ 0.400362] rk fb probe ok!
[ 0.427660] tps65910_pre_init,line=38
[ 0.430256] TPS65910 Set default voltage.
[ 0.432325] tps65910_pre_init,line=248
[ 0.453552] cfg80211: Calling CRDA to update world regulatory domain
[ 0.453651] tps65910_post_init,line=256
[ 0.453681] tps65910_post_init:g_pmic_type=2
[ 0.464998] tps65910_post_init set vio vcc_io=3300000mV end
[ 0.466050] tps65910_post_init set vpll vdd11=2500000mV end
[ 0.467079] tps65910_post_init set vdig2 vdd11=1100000mV end
[ 0.468102] tps65910_post_init set vaux33 vcc_tp=3300000mV end
[ 0.470487] tps65910_post_init set vdd1 vdd_cpu=1100000mV end
[ 0.472863] tps65910_post_init set vdd2 vcc_ddr=1200000mV end
[ 0.473888] tps65910_post_init set vdig1 vcc18_cif=1800000mV end
[ 0.474920] tps65910_post_init set vaux1 vcc25_hdmi=2500000mV end
[ 0.475945] tps65910_post_init set vaux2 vcca33=3300000mV end
[ 0.476967] tps65910_post_init set vdac vccio_wl=1800000mV end
[ 0.477989] tps65910_post_init set vmmc vcc28_cif=3300000mV end
[ 0.478131] tps65910_post_init,line=351 END
[ 0.478163] tps65910_i2c_probe:irq=356,irq_base=384,gpio_base=384
[ 0.488100] tps65910-rtc tps65910-rtc: rtc core: registered tps65910 as rtc0
[ 0.490866] tps65910_rtc_probe:ok
[ 0.490943] Switching to clocksource timer1
[ 0.494294] Switched to NOHz mode on CPU #0
[ 0.494834] Switched to NOHz mode on CPU #1
[ 0.497814] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf70a0000
[ 0.497896] fb0:win1
[ 0.497902] fb1:win0
[ 0.497906] fb2:win2
[ 0.498016] rk30 lcdc0 clk enable...
[ 0.498188] rk30 lcdc0 clk disable...
[ 0.526665] fb0:phy:90c00000>>vir:f8000000>>len:0xc00000
[ 0.589736] rk_fb_register>>>>>fb0
[ 0.589947] rk_fb_register>>>>>fb1
[ 0.590118] rk_fb_register>>>>>fb2
[ 0.590276] rk30 lcdc0 clk enable...
[ 0.590321] lcdc0: dclk:74250000>>fps:60 rk30_load_screen for lcdc0 ok!
[ 0.590369] lcdc0 wakeup from standby!
[ 0.590398] lcdc0 win1 open,atv layer:1
[ 0.590427] lcdc0: dclk:74250000>>fps:60 rk30_load_screen for lcdc0 ok!
[ 0.606333] rk30 lcdc0 probe ok!
[ 0.606470] pwm_regulator_probe:n_voltages=19
[ 0.606644] pwm_regulator.0: driver initialized
[ 0.622960] NET: Registered protocol family 2
[ 0.623125] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.623500] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.625373] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.626472] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.626518] TCP reno registered
[ 0.626546] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.626612] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.626922] NET: Registered protocol family 1
[ 0.627110] RK29 Backlight Driver Initialized.
[ 0.627321] Unpacking initramfs...
[ 0.765727] Freeing initrd memory: 2560K
[ 0.765939] rk30-tsadc rk30-tsadc: initialized
[ 0.766051] PMU: registered new PMU device of type 0
[ 0.766943] DVFS WARNING: vd_cpu : selector=86,but volt <=0
[ 0.784930] [BT_RFKILL]: ret=0x0
[ 0.785134] Loaded driver for PL330 DMAC-1 rk29-pl330
[ 0.785173] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.785351] Loaded driver for PL330 DMAC-2 rk29-pl330
[ 0.785389] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
[ 0.810706] highmem bounce pool size: 64 pages
[ 0.810917] ashmem: initialized
[ 0.820235] fuse init (API version 7.16)
[ 0.825104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.825162] io scheduler noop registered
[ 0.825200] io scheduler deadline registered
[ 0.825285] io scheduler cfq registered (default)
[ 0.845555] rga: Driver loaded succesfully
[ 0.845699] HDMI: hdmi_register() - video source 0 display 0
[ 0.855438] HDMI: hdmi_submit_work event 0100 delay 0
[ 0.855672] rk30-hdmi rk30-hdmi: rk30 hdmi probe sucess.
[ 0.855948] rk_serial.c v1.3 2012-12-14
[ 0.856057] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
[ 0.861113] HDMI:
[ 0.861118] hdmi_work_queue() - evt= 1 0
[ 0.861161] HDMI: hdmi_work_queue() - exit
[ 0.861169]
[ 0.901028] rk_serial rk_serial.0: membase 0xf70c4000
[ 0.901106] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
[ 0.991013] rk_serial rk_serial.3: membase 0xf70c8000
[ 0.991919] Rockchip ion module(version: 1.0) is successfully loaded
[ 0.999779] loop: module loaded
[ 0.999917] Android kernel panic handler initialized (bind=kpanic)
[ 1.002777] PPP generic driver version 2.4.2
[ 1.003431] PPP Deflate Compression module registered
[ 1.003515] PPP BSD Compression module registered
[ 1.026694] PPP MPPE Compression module registered
[ 1.026740] NET: Registered protocol family 24
[ 1.026851] usbcore: registered new interface driver asix
[ 1.026936] usbcore: registered new interface driver cdc_ether
[ 1.027015] usbcore: registered new interface driver dm9620
[ 1.027089] usbcore: registered new interface driver SR9700_android
[ 1.027165] usbcore: registered new interface driver net1080
[ 1.027239] usbcore: registered new interface driver cdc_subset
[ 1.027316] usbcore: registered new interface driver zaurus
[ 1.027367] cdc_ncm: 04-Aug-2011
[ 1.027426] usbcore: registered new interface driver cdc_ncm
[ 1.027466] Rockchip WiFi SYS interface (V1.00) ...
[ 1.027536] Initializing USB Mass Storage driver...
[ 1.027620] usbcore: registered new interface driver usb-storage
[ 1.027661] USB Mass Storage support registered.
[ 1.027796] usbcore: registered new interface driver usbserial
[ 1.027871] USB Serial support registered for generic
[ 1.027949] usbcore: registered new interface driver usbserial_generic
[ 1.027993] usbserial: USB Serial Driver core
[ 1.028054] USB Serial support registered for GSM modem (1-port)
[ 1.028149] usbcore: registered new interface driver option
[ 1.028188] option: v0.7.2:USB Driver for GSM modems
[ 1.250481] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[ 1.250521] usb20_otg usb20_otg: DWC OTG Controller
[ 1.250630] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
[ 1.250692] usb20_otg usb20_otg: irq 48, io mem 0x00000000
[ 1.250743] DWC_OTG: Init: Port Power? op_state=1
[ 1.250773] DWC_OTG: Init: Power Port (0)
[ 1.250831] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.250871] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.250912] usb usb1: Product: DWC OTG Controller
[ 1.250939] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
[ 1.250971] usb usb1: SerialNumber: usb20_otg
[ 1.251281] hub 1-0:1.0: USB hub found
[ 1.251312] hub 1-0:1.0: 1 port detected
[ 1.253840] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000
[ 1.464284] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[ 1.464324] usb20_host usb20_host: DWC OTG Controller
[ 1.464378] usb20_host usb20_host: new USB bus registered, assigned bus number 2
[ 1.464434] usb20_host usb20_host: irq 49, io mem 0x00000000
[ 1.464497] DWC_OTG: Init: Port Power? op_state=1
[ 1.464525] DWC_OTG: Init: Power Port (0)
[ 1.464589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.464629] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.464669] usb usb2: Product: DWC OTG Controller
[ 1.464696] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
[ 1.464728] usb usb2: SerialNumber: usb20_host
[ 1.464995] hub 2-0:1.0: USB hub found
[ 1.465024] hub 2-0:1.0: 1 port detected
[ 1.465358] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
[ 1.471314] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 1.471354] android_usb gadget: Number of LUNs=2
[ 1.471382] lun0: LUN: removable file: (no medium)
[ 1.471411] lun1: LUN: removable file: (no medium)
[ 1.471590] android_usb gadget: android_usb ready
[ 1.471744] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
[ 1.471978] usbcore: registered new interface driver xpad
[ 1.472039] usbcore: registered new interface driver usb_acecad
[ 1.472072] acecad: v3.2:USB Acecad Flair tablet driver
[ 1.472125] usbcore: registered new interface driver aiptek
[ 1.472156] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
[ 1.472198] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
[ 1.472260] usbcore: registered new interface driver gtco
[ 1.472290] GTCO usb driver version: 2.00.0006
[ 1.472337] usbcore: registered new interface driver hanwang
[ 1.472390] usbcore: registered new interface driver kbtab
[ 1.472421] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[ 1.472478] usbcore: registered new interface driver wacom
[ 1.472509] wacom: v1.52:USB Wacom tablet driver
[ 1.472644] ++++++++remotectl_init
[ 1.472683] ++++++++remotectl_probe
[ 1.472726] remotectl probe j=0x0
[ 1.472748] remotectl probe j=0x1
[ 1.472767] remotectl probe j=0x2
[ 1.472786] remotectl probe j=0x3
[ 1.472903] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
[ 1.473195] using rtc device, tps65910, for alarms
[ 1.473465] lirc_dev: IR Remote Control driver registered, major 250
[ 1.473502] IR NEC protocol handler initialized
[ 1.473528] IR RC5(x) protocol handler initialized
[ 1.473554] IR RC6 protocol handler initialized
[ 1.473579] IR JVC protocol handler initialized
[ 1.473606] IR Sony protocol handler initialized
[ 1.473632] IR RC5 (streamzap) protocol handler initialized
[ 1.473663] IR LIRC bridge handler initialized
[ 1.473688] Linux video capture interface: v2.00
[ 1.473772] usbcore: registered new interface driver uvcvideo
[ 1.473804] USB Video Class driver (v1.1.0)
[ 1.473855] def_ref_volt: 2500mV, curr_ref_volt: 2500mV
[ 1.474421] device-mapper: uevent: version 1.0.3
[ 1.474641] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.474771] Bluetooth: HCI UART driver ver 2.2
[ 1.474799] Bluetooth: HCI H4 protocol initialized
[ 1.474826] Bluetooth: HCILL protocol initialized
[ 1.474887] cpuidle: using governor ladder
[ 1.474912] cpuidle: using governor menu
[ 1.490514] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sd_mmc]
[ 1.490700] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sdio]
[ 1.492109] usbcore: registered new interface driver usbhid
[ 1.492144] usbhid: USB HID core driver
[ 1.492442] logger: created 256K log 'log_main'
[ 1.492533] logger: created 256K log 'log_events'
[ 1.492619] logger: created 256K log 'log_radio'
[ 1.492702] logger: created 256K log 'log_system'
[ 1.493351]
[ 1.493355] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc0]
[ 1.493409]
[ 1.493413] =================
[ 1.493417] mmc_rescan..1831.. ====find no SDMMC host. [mmc0]
[ 1.493483]
[ 1.493486] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
[ 1.495828] asoc: hdmi-audio-codec <-> rk29_i2s.0 mapping ok
[ 1.496121] ALSA device list:
[ 1.496143] #0: ROCKCHIP HDMI
[ 1.496244] GACT probability NOT on
[ 1.496273] Mirror/redirect action on
[ 1.496297] u32 classifier
[ 1.496314] Actions configured
[ 1.496337] Netfilter messages via NETLINK v0.30.
[ 1.496401] nf_conntrack version 0.5.0 (14484 buckets, 57936 max)
[ 1.496736] ctnetlink v0.93: registering with nfnetlink.
[ 1.496796] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.496839] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.497125] xt_time: kernel timezone is -0000
[ 1.497277] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.497420] arp_tables: (C) 2002 David S. Miller
[ 1.497488] TCP cubic registered
[ 1.497510] Initializing XFRM netlink socket
[ 1.497937] NET: Registered protocol family 10
[ 1.498512] Mobile IPv6
[ 1.498553] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.498681] IPv6 over IPv4 tunneling driver
[ 1.499273] NET: Registered protocol family 17
[ 1.499320] NET: Registered protocol family 15
[ 1.499525] Bluetooth: RFCOMM TTY layer initialized
[ 1.499563] Bluetooth: RFCOMM socket layer initialized
[ 1.499594] Bluetooth: RFCOMM ver 1.11
[ 1.499620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.499653] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.499793] NET: Registered protocol family 35
[ 1.499885] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.499984] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.500031] [BT_RFKILL]: ** disable irq
[ 1.521020] [BT_RFKILL]: bt shut off power
[ 1.551039] [BT_RFKILL]: bt_default device registered.
[ 1.551118] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 1.551187] Registering SWP/SWPB emulation handler
[ 1.555476] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ 1.555774] usbcore: registered new interface driver snd-usb-audio
[ 1.555911] Freeing init memory: 172K
[ 1.735310] gp_rknand_info = : 0xef508200
[ 1.735478] request IRQ_NANDC irq , ret=0.........
[ 1.735519] FTL INFO:Version = 438,Date = 20130516
[ 1.735601] FlashCopyProgBuf1=0xc1482000
[ 1.735643] ATime: 40 ns AHB: 148 timming: 1081
[ 1.735674] No.1 FLASH INFO:2c 68 4 4a a9
[ 1.735703] No.2 FLASH INFO:2c 68 4 4a a9
[ 1.736027] ATime: 32 ns AHB: 148 timming: 1061
[ 1.736197] ATime: 32 ns AHB: 148 timming: 1061
[ 1.736224] randomizer = 2 , EccBits = 18 pSpec->pReadRetrial = 0
[ 1.787461] totalLogicBlkRaw = 3953
[ 1.787497] gBootMedia = 1 gSdmmcFwPartOffset =0!
[ 1.787526] rknand_buffer.c version: 4.38 20121130!
[ 1.789688] 11 cmdlinepart partitions found on MTD device rk29xxnand
[ 1.789725] Creating 11 MTD partitions on "rk29xxnand":
[ 1.789759] 0x000000000000-0x000000400000 : "parameter"
[ 1.821577] 0x000000400000-0x000000800000 : "misc"
[ 1.861556] 0x000000800000-0x000001000000 : "kernel"
[ 1.901549] 0x000001000000-0x000002000000 : "boot"
[ 1.941042] usb 2-1: new high speed USB device number 2 using usb20_host
[ 1.941666] 0x000002000000-0x000003000000 : "recovery"
[ 1.981530] 0x000003000000-0x00001b000000 : "backup"
[ 2.013146] 0x00001b000000-0x000023000000 : "cache"
[ 2.019523] 0x000023000000-0x000043000000 : "userdata"
[ 2.026199] 0x000043000000-0x000043400000 : "kpanic"
[ 2.033043] apanic: Bound to mtd partition 'kpanic'
[ 2.033076] apanic: No panic data available
[ 2.033108] 0x000043400000-0x000063400000 : "system"
[ 2.039669] 0x000067400000-0x0001ee200000 : "user"
[ 2.050069] startBlk = 227 sysProtAddr = 226
[ 2.151904] usb 2-1: New USB device found, idVendor=0bda, idProduct=8179
[ 2.151947] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.151991] usb 2-1: Product: 802.11n NIC
[ 2.152015] usb 2-1: Manufacturer: Realtek
[ 2.152039] usb 2-1: SerialNumber: 7472F2102B04
mount: mounting /dev/sda* on /mnt failed: No such file or directory
umount: can't umount /newroot: Invalid argument
umount: can't umount /mnt: Invalid argumen
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment