-
-
Save aep/9c3e8e25f96065b615831d91502da3d3 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /dts-v1/; | |
| / { | |
| model = "Amlogic"; | |
| compatible = "amlogic, Gxm"; | |
| amlogic-dt-id = "gxm_q201_2g"; | |
| interrupt-parent = < 0x01 >; | |
| #address-cells = < 0x02 >; | |
| #size-cells = < 0x02 >; | |
| t82x { | |
| compatible = "arm,malit602\0arm,malit60x\0arm,malit6xx\0arm,mali-midgard"; | |
| #cooling-cells = < 0x02 >; | |
| reg = < 0x00 0xd00c0000 0x00 0x100000 0x00 0xc1104440 0x00 0x1000 0x00 0xc8100000 0x00 0x1000 0x00 0xc883c000 0x00 0x1000 0x00 0xc1104440 0x00 0x1000 >; | |
| interrupt-parent = < 0x01 >; | |
| interrupts = < 0x00 0xa0 0x04 0x00 0xa1 0x04 0x00 0xa2 0x04 >; | |
| interrupt-names = "GPU\0MMU\0JOB"; | |
| num_of_pp = < 0x03 >; | |
| sc_mpp = < 0x01 >; | |
| operating-points = < 0xa2c2a 0xf4240 0x7a120 0xf4240 0x61a80 0xf4240 0x45c12 0xf4240 0x3d090 0xf4240 0x1e848 0xf4240 >; | |
| tbl = < 0x02 0x03 0x04 0x05 0x05 >; | |
| clocks = < 0x06 0x08 0x06 0x09 0x06 0x11 0x06 0x12 0x06 0x1e 0x06 0x15 0x06 0x13 0x06 0x14 >; | |
| clock-names = "fclk_div3\0fclk_div4\0fclk_div5\0fclk_div7\0gp0_pll\0clk_gpu\0clk_gpu_0\0clk_gpu_1"; | |
| linux,phandle = < 0x84 >; | |
| phandle = < 0x84 >; | |
| clk125_cfg { | |
| clk_freq = < 0x7735940 >; | |
| clk_parent = "fclk_div4"; | |
| clkp_freq = < 0x1dcd6500 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0x1e 0x78 >; | |
| }; | |
| dvfs250_cfg { | |
| clk_freq = < 0xee6b280 >; | |
| clk_parent = "fclk_div4"; | |
| clkp_freq = < 0x1dcd6500 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0x50 0xaa >; | |
| }; | |
| dvfs285_cfg { | |
| clk_freq = < 0x1107a650 >; | |
| clk_parent = "fclk_div7"; | |
| clkp_freq = < 0x1107a650 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0x64 0xbe >; | |
| linux,phandle = < 0x02 >; | |
| phandle = < 0x02 >; | |
| }; | |
| dvfs400_cfg { | |
| clk_freq = < 0x17d78400 >; | |
| clk_parent = "fclk_div5"; | |
| clkp_freq = < 0x17d78400 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0x98 0xcf >; | |
| linux,phandle = < 0x03 >; | |
| phandle = < 0x03 >; | |
| }; | |
| dvfs500_cfg { | |
| clk_freq = < 0x1dcd6500 >; | |
| clk_parent = "fclk_div4"; | |
| clkp_freq = < 0x1dcd6500 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0xb4 0xdc >; | |
| linux,phandle = < 0x04 >; | |
| phandle = < 0x04 >; | |
| }; | |
| dvfs666_cfg { | |
| clk_freq = < 0x27b25a80 >; | |
| clk_parent = "fclk_div3"; | |
| clkp_freq = < 0x27b25a80 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0xd2 0xec >; | |
| linux,phandle = < 0x05 >; | |
| phandle = < 0x05 >; | |
| }; | |
| dvfs800_cfg { | |
| clk_freq = < 0x2f34f600 >; | |
| clk_parent = "gp0_pll"; | |
| clkp_freq = < 0x2f34f600 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0xe6 0xff >; | |
| }; | |
| }; | |
| gpu_clk@c883c00 { | |
| compatible = "meson, gpu-clkgen-1.00.a"; | |
| #clock-cells = < 0x00 >; | |
| reg = < 0x00 0xc883c000 0x00 0x1000 >; | |
| clocks = < 0x06 0x08 0x06 0x09 0x06 0x11 0x06 0x12 0x06 0x1e 0x06 0x15 0x06 0x13 0x06 0x14 >; | |
| clock-names = "fclk_div3\0fclk_div4\0fclk_div5\0fclk_div7\0gp0_pll\0clk_gpu\0clk_gpu_0\0clk_gpu_1"; | |
| clock-output-names = "clk_mali"; | |
| tbl = < 0x07 0x08 0x09 0x0a 0x0b 0x0c >; | |
| clk125_cfg { | |
| clk_freq = < 0x7735940 >; | |
| clk_parent = "fclk_div4"; | |
| clkp_freq = < 0x1dcd6500 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0x1e 0x78 >; | |
| linux,phandle = < 0x07 >; | |
| phandle = < 0x07 >; | |
| }; | |
| clk250_cfg { | |
| clk_freq = < 0xee6b280 >; | |
| clk_parent = "fclk_div4"; | |
| clkp_freq = < 0x1dcd6500 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0x50 0xaa >; | |
| linux,phandle = < 0x08 >; | |
| phandle = < 0x08 >; | |
| }; | |
| clk285_cfg { | |
| clk_freq = < 0x1107a650 >; | |
| clk_parent = "fclk_div7"; | |
| clkp_freq = < 0x1107a650 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0x64 0xbe >; | |
| linux,phandle = < 0x09 >; | |
| phandle = < 0x09 >; | |
| }; | |
| clk400_cfg { | |
| clk_freq = < 0x17d78400 >; | |
| clk_parent = "fclk_div5"; | |
| clkp_freq = < 0x17d78400 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0x98 0xcf >; | |
| linux,phandle = < 0x0a >; | |
| phandle = < 0x0a >; | |
| }; | |
| clk500_cfg { | |
| clk_freq = < 0x1dcd6500 >; | |
| clk_parent = "fclk_div4"; | |
| clkp_freq = < 0x1dcd6500 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0xb4 0xdc >; | |
| linux,phandle = < 0x0b >; | |
| phandle = < 0x0b >; | |
| }; | |
| clk666_cfg { | |
| clk_freq = < 0x27bc8410 >; | |
| clk_parent = "fclk_div3"; | |
| clkp_freq = < 0x27bc8410 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0xd2 0xec >; | |
| linux,phandle = < 0x0c >; | |
| phandle = < 0x0c >; | |
| }; | |
| clk720_cfg { | |
| clk_freq = < 0x2aea5400 >; | |
| clk_parent = "gp0_pll"; | |
| clkp_freq = < 0x2aea5400 >; | |
| voltage = < 0x47e >; | |
| keep_count = < 0x05 >; | |
| threshold = < 0xe6 0xff >; | |
| }; | |
| }; | |
| cpus { | |
| #address-cells = < 0x02 >; | |
| #size-cells = < 0x00 >; | |
| cpu-map { | |
| cluster0 { | |
| #cooling-cells = < 0x02 >; | |
| linux,phandle = < 0x80 >; | |
| phandle = < 0x80 >; | |
| core0 { | |
| cpu = < 0x0d >; | |
| }; | |
| core1 { | |
| cpu = < 0x0e >; | |
| }; | |
| core2 { | |
| cpu = < 0x0f >; | |
| }; | |
| core3 { | |
| cpu = < 0x10 >; | |
| }; | |
| }; | |
| cluster1 { | |
| #cooling-cells = < 0x02 >; | |
| linux,phandle = < 0x81 >; | |
| phandle = < 0x81 >; | |
| core0 { | |
| cpu = < 0x11 >; | |
| }; | |
| core1 { | |
| cpu = < 0x12 >; | |
| }; | |
| core2 { | |
| cpu = < 0x13 >; | |
| }; | |
| core3 { | |
| cpu = < 0x14 >; | |
| }; | |
| }; | |
| }; | |
| cpu@0 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a53\0arm,armv8"; | |
| reg = < 0x00 0x00 >; | |
| enable-method = "psci"; | |
| clocks = < 0x15 0x00 >; | |
| clock-names = "cpu-cluster.0"; | |
| cpu-idle-states = < 0x16 0x17 >; | |
| linux,phandle = < 0x0d >; | |
| phandle = < 0x0d >; | |
| }; | |
| cpu@1 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a53\0arm,armv8"; | |
| reg = < 0x00 0x01 >; | |
| enable-method = "psci"; | |
| clocks = < 0x15 0x00 >; | |
| clock-names = "cpu-cluster.0"; | |
| cpu-idle-states = < 0x16 0x17 >; | |
| linux,phandle = < 0x0e >; | |
| phandle = < 0x0e >; | |
| }; | |
| cpu@2 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a53\0arm,armv8"; | |
| reg = < 0x00 0x02 >; | |
| enable-method = "psci"; | |
| clocks = < 0x15 0x00 >; | |
| clock-names = "cpu-cluster.0"; | |
| cpu-idle-states = < 0x16 0x17 >; | |
| linux,phandle = < 0x0f >; | |
| phandle = < 0x0f >; | |
| }; | |
| cpu@3 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a53\0arm,armv8"; | |
| reg = < 0x00 0x03 >; | |
| enable-method = "psci"; | |
| clocks = < 0x15 0x00 >; | |
| clock-names = "cpu-cluster.0"; | |
| cpu-idle-states = < 0x16 0x17 >; | |
| linux,phandle = < 0x10 >; | |
| phandle = < 0x10 >; | |
| }; | |
| cpu@100 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a53\0arm,armv8"; | |
| reg = < 0x00 0x100 >; | |
| enable-method = "psci"; | |
| clocks = < 0x15 0x01 >; | |
| clock-names = "cpu-cluster.1"; | |
| cpu-idle-states = < 0x16 0x17 >; | |
| linux,phandle = < 0x11 >; | |
| phandle = < 0x11 >; | |
| }; | |
| cpu@101 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a53\0arm,armv8"; | |
| reg = < 0x00 0x101 >; | |
| enable-method = "psci"; | |
| clocks = < 0x15 0x01 >; | |
| clock-names = "cpu-cluster.1"; | |
| cpu-idle-states = < 0x16 0x17 >; | |
| linux,phandle = < 0x12 >; | |
| phandle = < 0x12 >; | |
| }; | |
| cpu@102 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a53\0arm,armv8"; | |
| reg = < 0x00 0x102 >; | |
| enable-method = "psci"; | |
| clocks = < 0x15 0x01 >; | |
| clock-names = "cpu-cluster.1"; | |
| cpu-idle-states = < 0x16 0x17 >; | |
| linux,phandle = < 0x13 >; | |
| phandle = < 0x13 >; | |
| }; | |
| cpu@103 { | |
| device_type = "cpu"; | |
| compatible = "arm,cortex-a53\0arm,armv8"; | |
| reg = < 0x00 0x103 >; | |
| enable-method = "psci"; | |
| clocks = < 0x15 0x01 >; | |
| clock-names = "cpu-cluster.1"; | |
| cpu-idle-states = < 0x16 0x17 >; | |
| linux,phandle = < 0x14 >; | |
| phandle = < 0x14 >; | |
| }; | |
| idle-states { | |
| entry-method = "arm,psci"; | |
| cpu-sleep-0 { | |
| compatible = "arm, idle-state"; | |
| arm,psci-suspend-param = < 0x10000 >; | |
| local-timer-stop; | |
| entry-latency-us = < 0x1f40 >; | |
| exit-latency-us = < 0x1f40 >; | |
| min-residency-us = < 0x4e20 >; | |
| linux,phandle = < 0x16 >; | |
| phandle = < 0x16 >; | |
| }; | |
| cluster-sleep-0 { | |
| compatible = "arm, idle-state"; | |
| arm,psci-suspend-param = < 0x1010000 >; | |
| local-timer-stop; | |
| entry-latency-us = < 0x1f40 >; | |
| exit-latency-us = < 0x1f40 >; | |
| min-residency-us = < 0x61a8 >; | |
| linux,phandle = < 0x17 >; | |
| phandle = < 0x17 >; | |
| }; | |
| }; | |
| }; | |
| timer { | |
| compatible = "arm,armv8-timer"; | |
| interrupts = < 0x01 0x0d 0xff01 0x01 0x0e 0xff01 0x01 0x0b 0xff01 0x01 0x0a 0xff01 >; | |
| }; | |
| timer_bc { | |
| compatible = "arm, meson-bc-timer"; | |
| reg = < 0x00 0xc1109990 0x00 0x04 0x00 0xc1109994 0x00 0x04 >; | |
| timer_name = "Meson TimerF"; | |
| clockevent-rating = < 0x12c >; | |
| clockevent-shift = < 0x14 >; | |
| clockevent-features = < 0x23 >; | |
| interrupts = < 0x00 0x3c 0x01 >; | |
| bit_enable = < 0x10 >; | |
| bit_mode = < 0x0c >; | |
| bit_resolution = < 0x00 >; | |
| }; | |
| arm_pmu { | |
| compatible = "arm,armv8-pmuv3"; | |
| interrupts = < 0x00 0x89 0x04 0x00 0x8a 0x04 0x00 0x99 0x04 0x00 0x9a 0x04 >; | |
| }; | |
| pm { | |
| compatible = "amlogic, pm"; | |
| device_name = "aml_pm"; | |
| gxbaby-suspend; | |
| reg = < 0x00 0xc81000a8 0x00 0x04 0x00 0xc810023c 0x00 0x04 >; | |
| }; | |
| interrupt-controller@2c001000 { | |
| compatible = "arm,cortex-a15-gic\0arm,cortex-a9-gic"; | |
| #interrupt-cells = < 0x03 >; | |
| #address-cells = < 0x00 >; | |
| interrupt-controller; | |
| reg = < 0x00 0xc4301000 0x00 0x1000 0x00 0xc4302000 0x00 0x100 >; | |
| interrupts = < 0x01 0x09 0xf04 >; | |
| linux,phandle = < 0x01 >; | |
| phandle = < 0x01 >; | |
| }; | |
| aml_restart { | |
| compatible = "aml, restart"; | |
| sys_reset = < 0x84000009 >; | |
| sys_poweroff = < 0x84000008 >; | |
| }; | |
| psci { | |
| compatible = "arm,psci"; | |
| method = "smc"; | |
| cpu_suspend = < 0xc4000001 >; | |
| cpu_off = < 0x84000002 >; | |
| cpu_on = < 0xc4000003 >; | |
| migrate = < 0xc4000005 >; | |
| }; | |
| secmon { | |
| compatible = "amlogic, secmon"; | |
| memory-region = < 0x18 >; | |
| in_base_func = < 0x82000020 >; | |
| out_base_func = < 0x82000021 >; | |
| }; | |
| securitykey { | |
| compatible = "aml, securitykey"; | |
| storage_query = < 0x82000060 >; | |
| storage_read = < 0x82000061 >; | |
| storage_write = < 0x82000062 >; | |
| storage_tell = < 0x82000063 >; | |
| storage_verify = < 0x82000064 >; | |
| storage_status = < 0x82000065 >; | |
| storage_list = < 0x82000067 >; | |
| storage_remove = < 0x82000068 >; | |
| storage_in_func = < 0x82000023 >; | |
| storage_out_func = < 0x82000024 >; | |
| storage_block_func = < 0x82000025 >; | |
| storage_size_func = < 0x82000027 >; | |
| storage_set_enctype = < 0x8200006a >; | |
| storage_get_enctype = < 0x8200006b >; | |
| storage_version = < 0x8200006c >; | |
| }; | |
| cpu_iomap { | |
| compatible = "amlogic, iomap"; | |
| #address-cells = < 0x02 >; | |
| #size-cells = < 0x02 >; | |
| ranges; | |
| io_cbus_base { | |
| reg = < 0x00 0xc1100000 0x00 0x100000 >; | |
| }; | |
| io_apb_base { | |
| reg = < 0x00 0xd0000000 0x00 0x200000 >; | |
| }; | |
| io_aobus_base { | |
| reg = < 0x00 0xc8100000 0x00 0x100000 >; | |
| }; | |
| }; | |
| cpufreq { | |
| compatible = "arm, scpi-cpufreq"; | |
| }; | |
| amlogic-watchdog { | |
| compatible = "amlogic, gx-wdt"; | |
| status = "disable"; | |
| default_timeout = < 0x0a >; | |
| reset_watchdog_method = < 0x01 >; | |
| reset_watchdog_time = < 0x02 >; | |
| shutdown_timeout = < 0x0a >; | |
| firmware_timeout = < 0x06 >; | |
| suspend_timeout = < 0x06 >; | |
| reg = < 0x00 0xc11098d0 0x00 0x10 >; | |
| clocks = < 0x06 0x02 >; | |
| }; | |
| amlogic-jtag { | |
| compatible = "amlogic, jtag"; | |
| status = "okay"; | |
| pinctrl-names = "jtag_apao_pins\0jtag_apee_pins"; | |
| pinctrl-0 = < 0x19 >; | |
| pinctrl-1 = < 0x1a >; | |
| }; | |
| meson_clock { | |
| compatible = "amlogic, gxl-clock"; | |
| reg = < 0x00 0xc883c000 0x00 0x1000 0x00 0xc8100000 0x00 0x1000 >; | |
| #clock-cells = < 0x01 >; | |
| #reset-cells = < 0x01 >; | |
| sys_max = < 0x5b8d8000 >; | |
| linux,phandle = < 0x06 >; | |
| phandle = < 0x06 >; | |
| }; | |
| cpu_info { | |
| compatible = "amlogic, cpuinfo"; | |
| cpuinfo_cmd = < 0x82000044 >; | |
| }; | |
| pinmux { | |
| compatible = "amlogic, pinmux-gxl"; | |
| dev_name = "pinmux"; | |
| #pinmux-cells = < 0x02 >; | |
| #address-cells = < 0x02 >; | |
| #size-cells = < 0x02 >; | |
| reg = < 0x00 0xc1109880 0x00 0x10 >; | |
| ranges; | |
| banks@c11080b0 { | |
| reg = < 0x00 0xc88344b0 0x00 0x28 0x00 0xc88344e8 0x00 0x14 0x00 0xc8834520 0x00 0x14 0x00 0xc8834430 0x00 0x40 >; | |
| reg-names = "mux\0pull\0pull-enable\0gpio"; | |
| gpio-controller; | |
| #gpio-cells = < 0x02 >; | |
| linux,phandle = < 0x34 >; | |
| phandle = < 0x34 >; | |
| }; | |
| ao-bank@c1108030 { | |
| reg = < 0x00 0xc8100014 0x00 0x08 0x00 0xc810002c 0x00 0x04 0x00 0xc8100024 0x00 0x08 >; | |
| reg-names = "mux\0pull\0gpio"; | |
| gpio-controller; | |
| #gpio-cells = < 0x02 >; | |
| linux,phandle = < 0x35 >; | |
| phandle = < 0x35 >; | |
| }; | |
| external_eth_pins { | |
| amlogic,setmask = < 0x04 0xfffc00 >; | |
| amlogic,clrmask = < 0x04 0x3fc 0x03 0xffcff800 >; | |
| amlogic,pins = "GPIOZ_0\0GPIOZ_1\0GPIOZ_2\0GPIOZ_3\0GPIOZ_4\0GPIOZ_5\0GPIOZ_6\0GPIOZ_7\0GPIOZ_8\0GPIOZ_9\0GPIOZ_10\0GPIOZ_11\0GPIOZ_12\0GPIOZ_13"; | |
| linux,phandle = < 0x39 >; | |
| phandle = < 0x39 >; | |
| }; | |
| internal_eth_pins { | |
| amlogic,setmask = < 0x04 0x3000000 >; | |
| amlogic,clrmask = < 0x03 0x300000 >; | |
| amlogic,pins = "GPIOZ_14\0GPIOZ_15"; | |
| }; | |
| jtag_apao_pin { | |
| amlogic,clrmask = < 0x06 0x7fe0000 >; | |
| amlogic,pins = "GPIOH_6\0GPIOH_7\0GPIOH_8\0GPIOH_9"; | |
| linux,phandle = < 0x19 >; | |
| phandle = < 0x19 >; | |
| }; | |
| jtag_apee_pin { | |
| amlogic,clrmask = < 0x06 0x3c >; | |
| amlogic,pins = "CARD_0\0CARD_1\0CARD_2\0CARD_3"; | |
| linux,phandle = < 0x1a >; | |
| phandle = < 0x1a >; | |
| }; | |
| remote_pin { | |
| amlogic,setmask = < 0x10 0x01 >; | |
| amlogic,pins = "GPIOAO_7"; | |
| linux,phandle = < 0x26 >; | |
| phandle = < 0x26 >; | |
| }; | |
| ao_uart { | |
| amlogic,setmask = < 0x10 0x1800 >; | |
| amlogic,pins = "GPIOAO_0\0GPIOAO_1"; | |
| }; | |
| ao_b_uart { | |
| amlogic,setmask = < 0x10 0x1800000 >; | |
| amlogic,pins = "GPIOAO_4\0GPIOAO_5"; | |
| linux,phandle = < 0x6a >; | |
| phandle = < 0x6a >; | |
| }; | |
| a_uart { | |
| amlogic,setmask = < 0x05 0xf0000 >; | |
| amlogic,clrmask = < 0x05 0x3c0 >; | |
| amlogic,pins = "GPIOX_12\0GPIOX_13\0GPIOX_14\0GPIOX_15"; | |
| linux,phandle = < 0x67 >; | |
| phandle = < 0x67 >; | |
| }; | |
| b_uart { | |
| amlogic,setmask = < 0x02 0x18000 >; | |
| amlogic,pins = "GPIODV_24\0GPIODV_25"; | |
| linux,phandle = < 0x68 >; | |
| phandle = < 0x68 >; | |
| }; | |
| c_uart { | |
| amlogic,setmask = < 0x05 0x3000 >; | |
| amlogic,pins = "GPIOX_8\0GPIOX_9"; | |
| linux,phandle = < 0x69 >; | |
| phandle = < 0x69 >; | |
| }; | |
| wifi_32k_pins { | |
| amlogic,setmask = < 0x05 0x8000 >; | |
| amlogic,pins = "GPIOX_16"; | |
| linux,phandle = < 0x3f >; | |
| phandle = < 0x3f >; | |
| }; | |
| sd_clk_cmd_pins { | |
| amlogic,setmask = < 0x06 0x0c 0x10 0x1800 >; | |
| amlogic,pins = "CARD_2\0CARD_3"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x45 >; | |
| phandle = < 0x45 >; | |
| }; | |
| sd_all_pins { | |
| amlogic,setmask = < 0x06 0x3f 0x10 0x1800 >; | |
| amlogic,clrmask = < 0x06 0xfc0 >; | |
| amlogic,pins = "CARD_0\0CARD_1\0CARD_2\0CARD_3\0CARD_4\0CARD_5"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x46 >; | |
| phandle = < 0x46 >; | |
| }; | |
| sd_1bit_pins { | |
| amlogic,setmask = < 0x06 0x1c 0x10 0x1800 >; | |
| amlogic,clrmask = < 0x06 0xcc3 >; | |
| amlogic,pins = "CARD_1\0CARD_2\0CARD_3"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x47 >; | |
| phandle = < 0x47 >; | |
| }; | |
| sd_clk_cmd_uart_pins { | |
| amlogic,setmask = < 0x06 0x30c >; | |
| amlogic,clrmask = < 0x06 0xcc3 0x10 0x1800 >; | |
| amlogic,pins = "CARD_2\0CARD_3"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x48 >; | |
| phandle = < 0x48 >; | |
| }; | |
| sd_1bit_uart_pins { | |
| amlogic,setmask = < 0x06 0x31c >; | |
| amlogic,clrmask = < 0x06 0xcc3 0x10 0x1800 >; | |
| amlogic,pins = "CARD_1\0CARD_2\0CARD_3"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x49 >; | |
| phandle = < 0x49 >; | |
| }; | |
| sd_to_ao_uart_pins { | |
| amlogic,setmask = < 0x10 0x1800 >; | |
| amlogic,clrmask = < 0x06 0x300 >; | |
| amlogic,pins = "GPIOAO_0\0GPIOAO_1"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x4a >; | |
| phandle = < 0x4a >; | |
| }; | |
| ao_to_sd_uart_pins { | |
| amlogic,setmask = < 0x06 0x300 >; | |
| amlogic,clrmask = < 0x10 0x1800 0x06 0xcc3 >; | |
| amlogic,pins = "CARD_4\0CARD_5"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x4b >; | |
| phandle = < 0x4b >; | |
| }; | |
| ao_to_sd_jtag_pins { | |
| amlogic,setmask = < 0x06 0x300 >; | |
| amlogic,clrmask = < 0x06 0xcff 0x10 0x1800 >; | |
| amlogic,pins = "CARD_4\0CARD_5"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x4c >; | |
| phandle = < 0x4c >; | |
| }; | |
| sd_to_ao_jtag_pins { | |
| amlogic,setmask = < 0x10 0x1800 >; | |
| amlogic,clrmask = < 0x06 0xfc0 >; | |
| amlogic,pins = "GPIOAO_0\0GPIOAO_1"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x4d >; | |
| phandle = < 0x4d >; | |
| }; | |
| emmc_clk_cmd_pins { | |
| amlogic,setmask = < 0x07 0x60000000 >; | |
| amlogic,clrmask = < 0x07 0xe0 >; | |
| amlogic,pins = "BOOT_8\0BOOT_10"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x41 >; | |
| phandle = < 0x41 >; | |
| }; | |
| emmc_conf_pull_up { | |
| amlogic,pins = "BOOT_0\0BOOT_1\0BOOT_2\0BOOT_3\0BOOT_4\0BOOT_5\0BOOT_6\0BOOT_7\0BOOT_8\0BOOT_10"; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x42 >; | |
| phandle = < 0x42 >; | |
| }; | |
| emmc_conf_pull_done { | |
| amlogic,pins = "BOOT_15"; | |
| amlogic,pullup = < 0x00 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x43 >; | |
| phandle = < 0x43 >; | |
| }; | |
| emmc_all_pins { | |
| amlogic,setmask = < 0x07 0xf0000000 >; | |
| amlogic,clrmask = < 0x07 0xe0 >; | |
| amlogic,pins = "BOOT_0\0BOOT_1\0BOOT_2\0BOOT_3\0BOOT_4\0BOOT_5\0BOOT_6\0BOOT_7\0BOOT_8\0BOOT_10\0BOOT_15"; | |
| amlogic,enable-output = < 0x01 >; | |
| linux,phandle = < 0x44 >; | |
| phandle = < 0x44 >; | |
| }; | |
| sdio_clk_cmd_pins { | |
| amlogic,setmask = < 0x05 0xc000000 >; | |
| amlogic,pins = "GPIOX_4\0GPIOX_5"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x4e >; | |
| phandle = < 0x4e >; | |
| }; | |
| sdio_all_pins { | |
| amlogic,setmask = < 0x05 0xfc000000 >; | |
| amlogic,pins = "GPIOX_0\0GPIOX_1\0GPIOX_2\0GPIOX_3\0GPIOX_4\0GPIOX_5"; | |
| amlogic,enable-output = < 0x01 >; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x4f >; | |
| phandle = < 0x4f >; | |
| }; | |
| conf_nand_pulldown { | |
| amlogic,pins = "BOOT_0\0BOOT_1\0BOOT_2\0BOOT_3\0BOOT_4\0BOOT_5\0BOOT_6\0BOOT_7\0BOOT_15"; | |
| amlogic,pullup = < 0x00 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x50 >; | |
| phandle = < 0x50 >; | |
| }; | |
| conf_nand_pullup { | |
| amlogic,pins = "BOOT_8\0BOOT_10"; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| linux,phandle = < 0x51 >; | |
| phandle = < 0x51 >; | |
| }; | |
| all_nand_pins { | |
| amlogic,setmask = < 0x07 0x800000ff >; | |
| amlogic,clrmask = < 0x07 0x70ffbc00 >; | |
| amlogic,pins = "BOOT_0\0BOOT_1\0BOOT_2\0BOOT_3\0BOOT_4\0BOOT_5\0BOOT_6\0BOOT_7\0BOOT_8\0BOOT_9\0BOOT_10\0BOOT_11\0BOOT_12\0BOOT_13\0BOOT_14\0BOOT_15"; | |
| amlogic,enable-output = < 0x01 >; | |
| linux,phandle = < 0x52 >; | |
| phandle = < 0x52 >; | |
| }; | |
| nand_cs { | |
| amlogic,setmask = < 0x07 0xc0 >; | |
| amlogic,clrmask = < 0x07 0x40040000 >; | |
| amlogic,pins = "BOOT_8\0BOOT_9"; | |
| linux,phandle = < 0x53 >; | |
| phandle = < 0x53 >; | |
| }; | |
| hdmitx_hpd { | |
| amlogic,setmask = < 0x06 0x80000000 >; | |
| amlogic,pins = "GPIOH_0"; | |
| linux,phandle = < 0x64 >; | |
| phandle = < 0x64 >; | |
| }; | |
| hdmitx_ddc { | |
| amlogic,setmask = < 0x06 0x30000000 >; | |
| amlogic,pins = "GPIOH_1\0GPIOH_2"; | |
| linux,phandle = < 0x65 >; | |
| phandle = < 0x65 >; | |
| }; | |
| hdmitx_aocec { | |
| amlogic,setmask = < 0x10 0x8000 >; | |
| amlogic,clrmask = < 0x10 0x24000 0x11 0x01 >; | |
| amlogic,pins = "GPIOAO_8"; | |
| linux,phandle = < 0x66 >; | |
| phandle = < 0x66 >; | |
| }; | |
| hdmitx_eecec { | |
| amlogic,setmask = < 0x10 0x4000 >; | |
| amlogic,clrmask = < 0x10 0x28000 0x11 0x01 >; | |
| amlogic,pins = "GPIOAO_8"; | |
| }; | |
| ao_i2c { | |
| amlogic,setmask = < 0x10 0x60 >; | |
| amlogic,clrmask = < 0x10 0x1800006 >; | |
| amlogic,pins = "GPIOAO_4\0GPIOAO_5"; | |
| linux,phandle = < 0x1b >; | |
| phandle = < 0x1b >; | |
| }; | |
| a_i2c { | |
| amlogic,setmask = < 0x01 0xc000 >; | |
| amlogic,clrmask = < 0x03 0x18 0x02 0x18000 0x02 0xc0 0x01 0x600000 >; | |
| amlogic,pins = "GPIODV_24\0GPIODV_25"; | |
| linux,phandle = < 0x1c >; | |
| phandle = < 0x1c >; | |
| }; | |
| b_i2c { | |
| amlogic,setmask = < 0x01 0x3000 >; | |
| amlogic,clrmask = < 0x02 0x6000 0x01 0x1c0000 >; | |
| amlogic,pins = "GPIODV_26\0GPIODV_27"; | |
| linux,phandle = < 0x1d >; | |
| phandle = < 0x1d >; | |
| }; | |
| c_i2c { | |
| amlogic,setmask = < 0x01 0xc00 >; | |
| amlogic,clrmask = < 0x02 0x1800 0x01 0x200 0x02 0x20 >; | |
| amlogic,pins = "GPIODV_28\0GPIODV_29"; | |
| linux,phandle = < 0x1e >; | |
| phandle = < 0x1e >; | |
| }; | |
| c_i2c_pin1 { | |
| amlogic,setmask = < 0x01 0x30000 >; | |
| amlogic,clrmask = < 0x01 0x2000000 0x03 0x20 >; | |
| amlogic,pins = "GPIODV_18\0GPIODV_19"; | |
| }; | |
| d_i2c { | |
| amlogic,setmask = < 0x05 0x30 >; | |
| amlogic,clrmask = < 0x05 0x300c03 0x06 0x03 >; | |
| amlogic,pins = "GPIOX_10\0GPIOX_11"; | |
| linux,phandle = < 0x1f >; | |
| phandle = < 0x1f >; | |
| }; | |
| spicc_pins_z11z12z13 { | |
| amlogic,setmask = < 0x04 0x1c >; | |
| amlogic,clrmask = < 0x03 0x800 0x04 0x1c00 >; | |
| amlogic,pins = "GPIOZ_11\0GPIOZ_12\0GPIOZ_13"; | |
| }; | |
| spicc_pulldown_z11z12z13 { | |
| amlogic,pins = "GPIOZ_11\0GPIOZ_12\0GPIOZ_13"; | |
| amlogic,pullup = < 0x00 >; | |
| amlogic,pullupen = < 0x01 >; | |
| }; | |
| spicc_pullup_z11z12z13 { | |
| amlogic,pins = "GPIOZ_11\0GPIOZ_12\0GPIOZ_13"; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| }; | |
| spicc_pins_x8x9x11 { | |
| amlogic,setmask = < 0x05 0x0d >; | |
| amlogic,clrmask = < 0x05 0xd03430 0x06 0x0d >; | |
| amlogic,pins = "GPIOX_8\0GPIOX_9\0GPIOX_11"; | |
| }; | |
| spicc_pulldown_x8x9x11 { | |
| amlogic,pins = "GPIOX_8\0GPIOX_9\0GPIOX_11"; | |
| amlogic,pullup = < 0x00 >; | |
| amlogic,pullupen = < 0x01 >; | |
| }; | |
| spicc_pullup_x8x9x11 { | |
| amlogic,pins = "GPIOX_8\0GPIOX_9\0GPIOX_11"; | |
| amlogic,pullup = < 0x01 >; | |
| amlogic,pullupen = < 0x01 >; | |
| }; | |
| audio_pin { | |
| amlogic,setmask = < 0x06 0x7800000 >; | |
| amlogic,clrmask = < 0x06 0x7e0000 >; | |
| amlogic,pins = "GPIOH_6\0GPIOH_7\0GPIOH_8\0GPIOH_9"; | |
| linux,phandle = < 0x6f >; | |
| phandle = < 0x6f >; | |
| }; | |
| audio_pin1 { | |
| amlogic,setmask = < 0x06 0x10000000 >; | |
| amlogic,clrmask = < 0x06 0x8000000 >; | |
| amlogic,pins = "GPIOH_4"; | |
| linux,phandle = < 0x6e >; | |
| phandle = < 0x6e >; | |
| }; | |
| audio_btpcm_pins { | |
| amlogic,setmask = < 0x05 0xf00000 >; | |
| amlogic,clrmask = < 0x05 0x3c33 >; | |
| amlogic,pins = "GPIOX_8\0GPIOX_9\0GPIOX_10\0GPIOX_11"; | |
| linux,phandle = < 0x6d >; | |
| phandle = < 0x6d >; | |
| }; | |
| }; | |
| cpu_version { | |
| reg = < 0x00 0xc8100220 0x00 0x04 >; | |
| }; | |
| meson_clk_msr { | |
| compatible = "amlogic, gxl_measure"; | |
| reg = < 0x00 0xc110875c 0x00 0x04 0x00 0xc1108764 0x00 0x04 >; | |
| }; | |
| i2c@c8100500 { | |
| compatible = "amlogic, meson-i2c"; | |
| dev_name = "i2c-AO"; | |
| status = "disabled"; | |
| reg = < 0x00 0xc8100500 0x00 0x1d >; | |
| device_id = < 0x00 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x1b >; | |
| #address-cells = < 0x01 >; | |
| #size-cells = < 0x00 >; | |
| use_pio = < 0x00 >; | |
| master_i2c_speed = < 0x493e0 >; | |
| clocks = < 0x06 0x0a >; | |
| clock-names = "clk_i2c"; | |
| resets = < 0x06 0x09 >; | |
| }; | |
| i2c@c1108500 { | |
| compatible = "amlogic, meson-i2c"; | |
| dev_name = "i2c-A"; | |
| status = "disabled"; | |
| reg = < 0x00 0xc1108500 0x00 0x20 >; | |
| device_id = < 0x01 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x1c >; | |
| #address-cells = < 0x01 >; | |
| #size-cells = < 0x00 >; | |
| use_pio = < 0x00 >; | |
| master_i2c_speed = < 0x493e0 >; | |
| clocks = < 0x06 0x0a >; | |
| clock-names = "clk_i2c"; | |
| resets = < 0x06 0x09 >; | |
| }; | |
| i2c@c11087c0 { | |
| compatible = "amlogic, meson-i2c"; | |
| dev_name = "i2c-B"; | |
| status = "disabled"; | |
| reg = < 0x00 0xc11087c0 0x00 0x20 >; | |
| device_id = < 0x02 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x1d >; | |
| #address-cells = < 0x01 >; | |
| #size-cells = < 0x00 >; | |
| use_pio = < 0x00 >; | |
| master_i2c_speed = < 0x493e0 >; | |
| clocks = < 0x06 0x0a >; | |
| clock-names = "clk_i2c"; | |
| resets = < 0x06 0x09 >; | |
| }; | |
| i2c@c11087e0 { | |
| compatible = "amlogic, meson-i2c"; | |
| dev_name = "i2c-C"; | |
| status = "disabled"; | |
| reg = < 0x00 0xc11087e0 0x00 0x20 >; | |
| device_id = < 0x03 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x1e >; | |
| #address-cells = < 0x01 >; | |
| #size-cells = < 0x00 >; | |
| use_pio = < 0x00 >; | |
| master_i2c_speed = < 0x493e0 >; | |
| clocks = < 0x06 0x0a >; | |
| clock-names = "clk_i2c"; | |
| resets = < 0x06 0x09 >; | |
| }; | |
| i2c@c1108d20 { | |
| compatible = "amlogic, meson-i2c"; | |
| dev_name = "i2c-D"; | |
| status = "disabled"; | |
| reg = < 0x00 0xc1108d20 0x00 0x20 >; | |
| device_id = < 0x04 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x1f >; | |
| #address-cells = < 0x01 >; | |
| #size-cells = < 0x00 >; | |
| use_pio = < 0x00 >; | |
| master_i2c_speed = < 0x493e0 >; | |
| clocks = < 0x06 0x0a >; | |
| clock-names = "clk_i2c"; | |
| resets = < 0x06 0x09 >; | |
| }; | |
| efuse { | |
| compatible = "amlogic, efuse"; | |
| read_cmd = < 0x82000030 >; | |
| write_cmd = < 0x82000031 >; | |
| get_max_cmd = < 0x82000033 >; | |
| key = < 0x20 >; | |
| resets = < 0x06 0x3e >; | |
| reset-names = "efuse_clk"; | |
| status = "ok"; | |
| }; | |
| efusekey { | |
| keynum = < 0x04 >; | |
| key0 = < 0x21 >; | |
| key1 = < 0x22 >; | |
| key2 = < 0x23 >; | |
| key3 = < 0x24 >; | |
| linux,phandle = < 0x20 >; | |
| phandle = < 0x20 >; | |
| key_0 { | |
| keyname = "mac"; | |
| offset = < 0x00 >; | |
| size = < 0x06 >; | |
| linux,phandle = < 0x21 >; | |
| phandle = < 0x21 >; | |
| }; | |
| key_1 { | |
| keyname = "mac_bt"; | |
| offset = < 0x06 >; | |
| size = < 0x06 >; | |
| linux,phandle = < 0x22 >; | |
| phandle = < 0x22 >; | |
| }; | |
| key_2 { | |
| keyname = "mac_wifi"; | |
| offset = < 0x0c >; | |
| size = < 0x06 >; | |
| linux,phandle = < 0x23 >; | |
| phandle = < 0x23 >; | |
| }; | |
| key_3 { | |
| keyname = "usid"; | |
| offset = < 0x12 >; | |
| size = < 0x10 >; | |
| linux,phandle = < 0x24 >; | |
| phandle = < 0x24 >; | |
| }; | |
| }; | |
| mhu@c883c400 { | |
| compatible = "amlogic, meson_mhu"; | |
| reg = < 0x00 0xc883c400 0x00 0x4c 0x00 0xc8013000 0x00 0x800 >; | |
| interrupts = < 0x00 0xd1 0x08 0x00 0xd2 0x08 >; | |
| #mbox-cells = < 0x01 >; | |
| mbox-names = "cpu_to_scp_low\0cpu_to_scp_high"; | |
| mboxes = < 0x25 0x00 0x25 0x01 >; | |
| linux,phandle = < 0x25 >; | |
| phandle = < 0x25 >; | |
| }; | |
| scpi_clocks { | |
| compatible = "arm,scpi-clks"; | |
| scpi_clocks@0 { | |
| compatible = "arm,scpi-clk-indexed"; | |
| #clock-cells = < 0x01 >; | |
| clock-indices = < 0x00 0x01 >; | |
| clock-output-names = "vbig\0vlittle"; | |
| linux,phandle = < 0x15 >; | |
| phandle = < 0x15 >; | |
| }; | |
| }; | |
| meson-remote { | |
| compatible = "amlogic, aml_remote"; | |
| dev_name = "meson-remote"; | |
| status = "okay"; | |
| remote_ao_offset = < 0x580 >; | |
| interrupts = < 0x00 0xc4 0x01 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x26 >; | |
| }; | |
| custom_maps { | |
| mapnum = < 0x03 >; | |
| map0 = < 0x27 >; | |
| map1 = < 0x28 >; | |
| map2 = < 0x29 >; | |
| map_0 { | |
| mapname = "amlogic-remote-1"; | |
| customcode = < 0xfb04 >; | |
| release_delay = < 0x50 >; | |
| size = < 0x2c >; | |
| keymap = < 0x47000b 0x130002 0x100003 0x110004 0xf0005 0xc0006 0xd0007 0xb0008 0x80009 0x9000a 0x5c0061 0x510041 0x49000e 0x60082 0x140083 0x440067 0x1d006c 0x1c0069 0x48006a 0x53007d 0x450068 0x19006d 0x160066 0x520077 0x5007a 0x59007b 0x1b0078 0x40079 0x1a0074 0xa000f 0xe0071 0x15003f 0x1f0066 0x1e0084 0x70085 0x120086 0x540087 0x20088 0x4f001e 0x420030 0x5d002e 0x4c0020 0x580089 0x55008c >; | |
| linux,phandle = < 0x27 >; | |
| phandle = < 0x27 >; | |
| }; | |
| map_1 { | |
| mapname = "amlogic-remote-2"; | |
| customcode = < 0xfe01 >; | |
| release_delay = < 0x50 >; | |
| size = < 0x35 >; | |
| keymap = < 0x10002 0x20003 0x30004 0x40005 0x50006 0x60007 0x70008 0x80009 0x9000a 0xa000b 0x1f01d2 0x15008b 0x16000f 0xc0192 0xd0193 0xe0073 0xf0072 0x110066 0x1c006a 0x1b0069 0x190067 0x1a006c 0x1d001c 0x170071 0x4900db 0x43009e 0x1201d5 0x1401d6 0x1801d7 0x590166 0x5a00a6 0x100074 0x4200a5 0x4400a3 0x1e00a8 0x4b00d0 0x5800a4 0x460082 0x400083 0x380046 0x5701d0 0x5b01d1 0x54018e 0x4c018f 0x4e0190 0x550191 0x5300ed 0x5200ee 0x3900d4 0x4100d5 0xb00d6 0xd8 0x1300d9 >; | |
| linux,phandle = < 0x28 >; | |
| phandle = < 0x28 >; | |
| }; | |
| map_2 { | |
| mapname = "amlogic-remote-3"; | |
| customcode = < 0xbd02 >; | |
| release_delay = < 0x50 >; | |
| size = < 0x11 >; | |
| keymap = < 0xca0067 0xd2006c 0x990069 0xc1006a 0xce0061 0x450074 0xc50085 0x800071 0xd0000f 0xd6007d 0x950066 0xdd0068 0x8c006d 0x890083 0x9c0082 0x9a0078 0xcd0079 >; | |
| linux,phandle = < 0x29 >; | |
| phandle = < 0x29 >; | |
| }; | |
| }; | |
| rng { | |
| compatible = "amlogic,meson-rng"; | |
| reg = < 0x00 0xc8834000 0x00 0x04 >; | |
| }; | |
| audio_data { | |
| compatible = "amlogic, audio_data"; | |
| query_licence_cmd = < 0x82000050 >; | |
| status = "okay"; | |
| }; | |
| saradc { | |
| compatible = "amlogic, saradc"; | |
| status = "okay"; | |
| interrupts = < 0x00 0x09 0x01 >; | |
| interrupt-names = "saradc_int"; | |
| clocks = < 0x06 0x02 >; | |
| clock-names = "saradc_clk"; | |
| resets = < 0x06 0x56 >; | |
| reg = < 0x00 0xc1108680 0x00 0x30 0x00 0xc883c3d8 0x00 0x08 >; | |
| }; | |
| defendkey { | |
| compatible = "amlogic, defendkey"; | |
| reg = < 0x00 0xc8834500 0x00 0x04 >; | |
| mem_size = < 0x00 0x100000 >; | |
| status = "okay"; | |
| }; | |
| spicc { | |
| compatible = "amlogic, spicc"; | |
| status = "disabled"; | |
| reg = < 0x00 0xc1108d80 0x00 0x28 >; | |
| resets = < 0x06 0x08 >; | |
| reset-names = "spicc_clk"; | |
| clocks = < 0x06 0x0a >; | |
| clock-names = "clk81"; | |
| interrupts = < 0x00 0x51 0x01 >; | |
| device_id = < 0x00 >; | |
| }; | |
| aml_aes { | |
| compatible = "amlogic,aes_dma"; | |
| dev_name = "aml_aes_dma"; | |
| interrupts = < 0x00 0xbc 0x01 0x00 0xbd 0x01 >; | |
| reg = < 0x00 0xc883e000 0x00 0x28 >; | |
| }; | |
| aml_tdes { | |
| compatible = "amlogic,des_dma,tdes_dma"; | |
| dev_name = "aml_tdes_dma"; | |
| interrupts = < 0x00 0xbc 0x01 0x00 0xbd 0x01 >; | |
| reg = < 0x00 0xc883e000 0x00 0x28 >; | |
| }; | |
| aml_sha { | |
| compatible = "amlogic,sha_dma"; | |
| dev_name = "aml_sha_dma"; | |
| interrupts = < 0x00 0xbc 0x01 0x00 0xbd 0x01 >; | |
| reg = < 0x00 0xc883e000 0x00 0x28 >; | |
| }; | |
| meson-pwm { | |
| compatible = "amlogic, meson-pwm"; | |
| status = "okay"; | |
| #pwm-cells = < 0x02 >; | |
| pwm-outputs = < 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f >; | |
| reg = < 0x00 0xc1108550 0x00 0x1c 0x00 0xc1108640 0x00 0x1c 0x00 0xc11086c0 0x00 0x1c 0x00 0xc8100550 0x00 0x1c >; | |
| clocks = < 0x06 0x02 0x06 0x05 0x06 0x09 0x06 0x08 >; | |
| clock-names = "xtal\0vid_pll_clk\0fclk_div4\0fclk_div3"; | |
| clock-select = < 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 >; | |
| }; | |
| partitions { | |
| parts = < 0x0a >; | |
| part-0 = < 0x2a >; | |
| part-1 = < 0x2b >; | |
| part-2 = < 0x2c >; | |
| part-3 = < 0x2d >; | |
| part-4 = < 0x2e >; | |
| part-5 = < 0x2f >; | |
| part-6 = < 0x30 >; | |
| part-7 = < 0x31 >; | |
| part-8 = < 0x32 >; | |
| part-9 = < 0x33 >; | |
| logo { | |
| pname = "logo"; | |
| size = < 0x00 0x2000000 >; | |
| mask = < 0x01 >; | |
| linux,phandle = < 0x2a >; | |
| phandle = < 0x2a >; | |
| }; | |
| recovery { | |
| pname = "recovery"; | |
| size = < 0x00 0x2000000 >; | |
| mask = < 0x01 >; | |
| linux,phandle = < 0x2b >; | |
| phandle = < 0x2b >; | |
| }; | |
| rsv { | |
| pname = "rsv"; | |
| size = < 0x00 0x800000 >; | |
| mask = < 0x01 >; | |
| linux,phandle = < 0x2c >; | |
| phandle = < 0x2c >; | |
| }; | |
| tee { | |
| pname = "tee"; | |
| size = < 0x00 0x800000 >; | |
| mask = < 0x01 >; | |
| linux,phandle = < 0x2d >; | |
| phandle = < 0x2d >; | |
| }; | |
| crypt { | |
| pname = "crypt"; | |
| size = < 0x00 0x2000000 >; | |
| mask = < 0x01 >; | |
| linux,phandle = < 0x2e >; | |
| phandle = < 0x2e >; | |
| }; | |
| misc { | |
| pname = "misc"; | |
| size = < 0x00 0x2000000 >; | |
| mask = < 0x01 >; | |
| linux,phandle = < 0x2f >; | |
| phandle = < 0x2f >; | |
| }; | |
| boot { | |
| pname = "boot"; | |
| size = < 0x00 0x2000000 >; | |
| mask = < 0x01 >; | |
| linux,phandle = < 0x30 >; | |
| phandle = < 0x30 >; | |
| }; | |
| system { | |
| pname = "system"; | |
| size = < 0x00 0x80000000 >; | |
| mask = < 0x01 >; | |
| linux,phandle = < 0x31 >; | |
| phandle = < 0x31 >; | |
| }; | |
| cache { | |
| pname = "cache"; | |
| size = < 0x00 0x20000000 >; | |
| mask = < 0x02 >; | |
| linux,phandle = < 0x32 >; | |
| phandle = < 0x32 >; | |
| }; | |
| data { | |
| pname = "data"; | |
| size = < 0xffffffff 0xffffffff >; | |
| mask = < 0x04 >; | |
| linux,phandle = < 0x33 >; | |
| phandle = < 0x33 >; | |
| }; | |
| }; | |
| aliases { | |
| serial0 = "/serial@c81004c0"; | |
| serial1 = "/serial@c11084c0"; | |
| serial2 = "/serial@c11084dc"; | |
| serial3 = "/serial@c1108700"; | |
| serial4 = "/serial@c81004e0"; | |
| }; | |
| memory@00000000 { | |
| device_type = "memory"; | |
| linux,usable-memory = < 0x00 0x100000 0x00 0x7ff00000 >; | |
| }; | |
| reserved-memory { | |
| #address-cells = < 0x02 >; | |
| #size-cells = < 0x02 >; | |
| ranges; | |
| linux,secmon { | |
| compatible = "amlogic, aml_secmon_memory"; | |
| reg = < 0x00 0x10000000 0x00 0x200000 >; | |
| no-map; | |
| linux,phandle = < 0x18 >; | |
| phandle = < 0x18 >; | |
| }; | |
| linux,secos { | |
| status = "disable"; | |
| compatible = "amlogic, aml_secos_memory"; | |
| reg = < 0x00 0x5300000 0x00 0x2000000 >; | |
| no-map; | |
| }; | |
| aml_pstore { | |
| compatible = "amlogic, pstore"; | |
| reg = < 0x00 0x7300000 0x00 0x100000 >; | |
| no-map; | |
| }; | |
| linux,di { | |
| compatible = "amlogic, di-mem"; | |
| size = < 0x00 0x1e00000 >; | |
| linux,phandle = < 0x3d >; | |
| phandle = < 0x3d >; | |
| }; | |
| linux,chunk-reserve { | |
| compatible = "amlogic, chunk-reserve"; | |
| size = < 0x00 0x4000000 >; | |
| linux,phandle = < 0x36 >; | |
| phandle = < 0x36 >; | |
| }; | |
| linux,ion-dev { | |
| compatible = "amlogic, idev-mem"; | |
| size = < 0x00 0x4000000 >; | |
| linux,phandle = < 0x3a >; | |
| phandle = < 0x3a >; | |
| }; | |
| linux,vdin1_cma { | |
| compatible = "shared-dma-pool"; | |
| reusable; | |
| size = < 0x00 0x1000000 >; | |
| alignment = < 0x00 0x400000 >; | |
| linux,phandle = < 0x3e >; | |
| phandle = < 0x3e >; | |
| }; | |
| linux,ppmgr { | |
| compatible = "shared-dma-pool"; | |
| size = < 0x00 0x00 >; | |
| linux,phandle = < 0x3c >; | |
| phandle = < 0x3c >; | |
| }; | |
| linux,codec_mm_cma { | |
| compatible = "shared-dma-pool"; | |
| reusable; | |
| size = < 0x00 0x15000000 >; | |
| alignment = < 0x00 0x400000 >; | |
| linux,contiguous-region; | |
| linux,phandle = < 0x37 >; | |
| phandle = < 0x37 >; | |
| }; | |
| linux,picdec { | |
| compatible = "shared-dma-pool"; | |
| reusable; | |
| size = < 0x00 0x00 >; | |
| alignment = < 0x00 0x00 >; | |
| linux,contiguous-region; | |
| linux,phandle = < 0x3b >; | |
| phandle = < 0x3b >; | |
| }; | |
| linux,codec_mm_reserved { | |
| compatible = "amlogic, codec-mm-reserved"; | |
| size = < 0x00 0x4100000 >; | |
| alignment = < 0x00 0x100000 >; | |
| linux,phandle = < 0x38 >; | |
| phandle = < 0x38 >; | |
| }; | |
| }; | |
| sysled { | |
| compatible = "amlogic, sysled"; | |
| dev_name = "sysled"; | |
| status = "okay"; | |
| red_gpio = < 0x34 0x4d 0x00 >; | |
| led_gpio = < 0x35 0x09 0x00 >; | |
| mcu_gpio = < 0x35 0x06 0x00 >; | |
| led_active_low = < 0x01 >; | |
| }; | |
| hbs658 { | |
| compatible = "amlogic, hbs658"; | |
| dev_name = "hbs658"; | |
| status = "okay"; | |
| gpio-scl = < 0x34 0x4c 0x00 >; | |
| gpio-sda = < 0x34 0x4b 0x00 >; | |
| }; | |
| chunk-reserve { | |
| compatible = "amlogic, chunk-reserve"; | |
| memory-region = < 0x36 >; | |
| status = "okay"; | |
| }; | |
| meson-vout { | |
| compatible = "amlogic, meson-vout"; | |
| dev_name = "meson-vout"; | |
| status = "okay"; | |
| }; | |
| meson-fb { | |
| compatible = "amlogic, meson-fb"; | |
| dev_name = "meson-fb"; | |
| status = "okay"; | |
| interrupts = < 0x00 0x03 0x01 0x00 0x59 0x01 >; | |
| interrupt-names = "viu-vsync\0rdma"; | |
| mem_size = < 0x1851000 0x100000 >; | |
| display_mode_default = "1080p60hz"; | |
| scale_mode = < 0x01 >; | |
| display_size_default = < 0x780 0x438 0x780 0xca8 0x20 >; | |
| logo_addr = "0x7f851000"; | |
| }; | |
| ge2d { | |
| compatible = "amlogic, ge2d"; | |
| dev_name = "ge2d"; | |
| status = "okay"; | |
| interrupts = < 0x00 0x96 0x01 >; | |
| interrupt-names = "ge2d"; | |
| clocks = < 0x06 0x17 0x06 0x19 >; | |
| clock-names = "clk_vapb_0\0clk_ge2d"; | |
| resets = < 0x06 0x34 >; | |
| reset-names = "ge2d"; | |
| }; | |
| codec_io { | |
| compatible = "amlogic, codec_io"; | |
| #address-cells = < 0x02 >; | |
| #size-cells = < 0x02 >; | |
| ranges; | |
| io_cbus_base { | |
| reg = < 0x00 0xc1100000 0x00 0x100000 >; | |
| }; | |
| io_dos_base { | |
| reg = < 0x00 0xc8820000 0x00 0x10000 >; | |
| }; | |
| io_hiubus_base { | |
| reg = < 0x00 0xc883c000 0x00 0x2000 >; | |
| }; | |
| io_aobus_base { | |
| reg = < 0x00 0xc8100000 0x00 0x100000 >; | |
| }; | |
| io_vcbus_base { | |
| reg = < 0x00 0xd0100000 0x00 0x40000 >; | |
| }; | |
| io_dmc_base { | |
| reg = < 0x00 0xc8838000 0x00 0x400 >; | |
| }; | |
| }; | |
| codec_mm { | |
| compatible = "amlogic, codec, mm"; | |
| memory-region = < 0x37 0x38 >; | |
| dev_name = "codec_mm"; | |
| status = "okay"; | |
| }; | |
| ethernet@0xc9410000 { | |
| compatible = "amlogic, gxbb-rgmii-dwmac"; | |
| reg = < 0x00 0xc9410000 0x00 0x10000 0x00 0xc8834540 0x00 0x08 0x00 0xc8834558 0x00 0x0c >; | |
| interrupts = < 0x00 0x08 0x01 >; | |
| phy-mode = "rgmii"; | |
| pinctrl-names = "external_eth_pins"; | |
| pinctrl-0 = < 0x39 >; | |
| rst_pin-gpios = < 0x34 0x0e 0x00 >; | |
| GPIOZ4_pin-gpios = < 0x34 0x04 0x00 >; | |
| GPIOZ5_pin-gpios = < 0x34 0x05 0x00 >; | |
| mc_val = < 0x1621 >; | |
| cali_val = < 0x20000 >; | |
| resets = < 0x06 0x23 >; | |
| reset-names = "ethpower"; | |
| interrupt-names = "macirq"; | |
| clocks = < 0x06 0x0a >; | |
| clock-names = "ethclk81"; | |
| internal_phy = < 0x00 >; | |
| }; | |
| mesonstream { | |
| compatible = "amlogic, codec, streambuf"; | |
| dev_name = "mesonstream"; | |
| status = "okay"; | |
| resets = < 0x06 0x39 0x06 0x59 0x06 0x24 0x06 0x01 >; | |
| reset-names = "parser_top\0vpu_intr\0demux\0vdec"; | |
| }; | |
| amvideocap { | |
| compatible = "amlogic, amvideocap"; | |
| dev_name = "amvideocap.0"; | |
| status = "okay"; | |
| max_size = < 0x08 >; | |
| }; | |
| ion_dev { | |
| compatible = "amlogic, ion_dev"; | |
| memory-region = < 0x3a >; | |
| }; | |
| vdec { | |
| compatible = "amlogic, vdec"; | |
| dev_name = "vdec.0"; | |
| status = "okay"; | |
| interrupts = < 0x00 0x03 0x01 0x00 0x17 0x01 0x00 0x20 0x01 0x00 0x2b 0x01 0x00 0x2c 0x01 0x00 0x2d 0x01 >; | |
| interrupt-names = "vsync\0demux\0parser\0mailbox_0\0mailbox_1\0mailbox_2"; | |
| }; | |
| picdec { | |
| compatible = "amlogic, picdec"; | |
| memory-region = < 0x3b >; | |
| dev_name = "picdec"; | |
| status = "okay"; | |
| }; | |
| ppmgr { | |
| compatible = "amlogic, ppmgr"; | |
| memory-region = < 0x3c >; | |
| dev_name = "ppmgr"; | |
| status = "okay"; | |
| }; | |
| deinterlace { | |
| compatible = "amlogic, deinterlace"; | |
| status = "okay"; | |
| memory-region = < 0x3d >; | |
| interrupts = < 0x00 0x2e 0x01 0x00 0x06 0x01 >; | |
| interrupt-names = "de_irq\0timerc"; | |
| buffer-size = < 0x2fd000 >; | |
| hw-version = < 0x02 >; | |
| }; | |
| vdin0 { | |
| compatible = "amlogic, vdin"; | |
| dev_name = "vdin0"; | |
| status = "ok"; | |
| reserve-iomap = "true"; | |
| flag_cma = < 0x01 >; | |
| cma_size = < 0x10 >; | |
| interrupts = < 0x00 0x53 0x01 >; | |
| rdma-irq = < 0x02 >; | |
| clocks = < 0x06 0x11 0x06 0x29 >; | |
| clock-names = "fclk_div5\0cts_vdin_meas_clk"; | |
| vdin_id = < 0x00 >; | |
| tv_bit_mode = < 0x01 >; | |
| }; | |
| vdin1 { | |
| compatible = "amlogic, vdin"; | |
| memory-region = < 0x3e >; | |
| dev_name = "vdin1"; | |
| status = "ok"; | |
| reserve-iomap = "true"; | |
| flag_cma = < 0x00 >; | |
| interrupts = < 0x00 0x55 0x01 >; | |
| rdma-irq = < 0x04 >; | |
| clocks = < 0x06 0x11 0x06 0x29 >; | |
| clock-names = "fclk_div5\0cts_vdin_meas_clk"; | |
| vdin_id = < 0x01 >; | |
| tv_bit_mode = < 0x01 >; | |
| }; | |
| amvdec_656in0 { | |
| compatible = "amlogic, amvdec_656in"; | |
| dev_name = "amvdec_656in0"; | |
| status = "ok"; | |
| reg = < 0x00 0xd0048000 0x00 0x7c >; | |
| clocks = < 0x06 0x07 0x06 0x26 >; | |
| clock-names = "fclk_div2\0cts_bt656_clk0"; | |
| bt656_id = < 0x00 >; | |
| }; | |
| amvdec_656in1 { | |
| compatible = "amlogic, amvdec_656in"; | |
| dev_name = "amvdec_656in1"; | |
| status = "ok"; | |
| reg = < 0x00 0xd0050000 0x00 0x7c >; | |
| clocks = < 0x06 0x07 0x06 0x27 >; | |
| clock-names = "fclk_div2\0cts_bt656_clk1"; | |
| bt656_id = < 0x01 >; | |
| }; | |
| amlvecm { | |
| compatible = "amlogic, vecm"; | |
| dev_name = "aml_vecm"; | |
| status = "okay"; | |
| gamma_en = < 0x00 >; | |
| wb_en = < 0x00 >; | |
| cm_en = < 0x00 >; | |
| }; | |
| amvenc_avc { | |
| compatible = "amlogic, amvenc_avc"; | |
| dev_name = "amvenc_avc"; | |
| status = "okay"; | |
| interrupts = < 0x00 0x2d 0x01 >; | |
| interrupt-names = "mailbox_2"; | |
| }; | |
| hevc_enc { | |
| compatible = "cnm, HevcEnc"; | |
| dev_name = "HevcEnc"; | |
| status = "okay"; | |
| interrupts = < 0x00 0xbb 0x01 >; | |
| interrupt-names = "wave420l_irq"; | |
| #address-cells = < 0x02 >; | |
| #size-cells = < 0x02 >; | |
| ranges; | |
| io_reg_base { | |
| reg = < 0x00 0xc8810000 0x00 0x4000 >; | |
| }; | |
| }; | |
| vpu { | |
| compatible = "amlogic, vpu"; | |
| dev_name = "vpu"; | |
| status = "ok"; | |
| clk_level = < 0x07 >; | |
| }; | |
| bt-dev { | |
| compatible = "amlogic, bt-dev"; | |
| dev_name = "bt-dev"; | |
| status = "okay"; | |
| gpio_reset = < 0x34 0x60 0x00 >; | |
| }; | |
| rtc { | |
| compatible = "amlogic, aml_vrtc"; | |
| alarm_reg_addr = < 0xc81000a8 >; | |
| timer_e_addr = < 0xc1109988 >; | |
| init_date = "2015/01/01"; | |
| status = "okay"; | |
| }; | |
| wifi { | |
| compatible = "amlogic, aml_wifi"; | |
| dev_name = "aml_wifi"; | |
| status = "okay"; | |
| interrupt_pin = < 0x34 0x56 0x00 >; | |
| interrupts = < 0x00 0x44 0x04 >; | |
| irq_trigger_type = "GPIO_IRQ_LOW"; | |
| power_on_pin = < 0x34 0x55 0x00 >; | |
| dhd_static_buf; | |
| pinctrl-names = "wifi_32k_pins"; | |
| pinctrl-0 = < 0x3f >; | |
| pwm_config = < 0x40 >; | |
| }; | |
| wifi_pwm_conf { | |
| pwm_channel1 = < 0x04 >; | |
| pwm_channel2 = < 0x0c >; | |
| pwm_channel1_conf = < 0x774d 0x3ba6 0x06 >; | |
| pwm_channel2_conf = < 0x7736 0x3b9b 0x09 >; | |
| linux,phandle = < 0x40 >; | |
| phandle = < 0x40 >; | |
| }; | |
| emmc { | |
| compatible = "amlogic, aml_sd_emmc"; | |
| dev_name = "aml_newsd.0"; | |
| status = "okay"; | |
| reg = < 0x00 0xd0074000 0x00 0x2000 >; | |
| interrupts = < 0x00 0xda 0x01 >; | |
| pinctrl-names = "emmc_clk_cmd_pins\0emmc_all_pins"; | |
| pinctrl-0 = < 0x41 >; | |
| pinctrl-1 = < 0x42 0x43 0x44 >; | |
| emmc { | |
| status = "okay"; | |
| pinname = "emmc"; | |
| ocr_avail = < 0x200080 >; | |
| caps = "MMC_CAP_8_BIT_DATA\0MMC_CAP_MMC_HIGHSPEED\0MMC_CAP_SD_HIGHSPEED\0MMC_CAP_NONREMOVABLE\0MMC_CAP_1_8V_DDR\0MMC_CAP_HW_RESET\0MMC_CAP_ERASE\0MMC_CAP_CMD23"; | |
| f_min = < 0x493e0 >; | |
| f_max = < 0x2faf080 >; | |
| max_req_size = < 0x20000 >; | |
| gpio_dat3 = < 0x34 0x1d 0x00 >; | |
| hw_reset = < 0x34 0x23 0x00 >; | |
| card_type = < 0x01 >; | |
| }; | |
| }; | |
| sd { | |
| compatible = "amlogic, aml_sd_emmc"; | |
| dev_name = "aml_newsd.0"; | |
| status = "okay"; | |
| reg = < 0x00 0xd0072000 0x00 0x2000 >; | |
| interrupts = < 0x00 0xd9 0x01 0x00 0x43 0x01 0x00 0x45 0x01 >; | |
| pinctrl-names = "sd_clk_cmd_pins\0sd_all_pins\0sd_1bit_pins\0sd_clk_cmd_uart_pins\0sd_1bit_uart_pins\0sd_to_ao_uart_pins\0ao_to_sd_uart_pins\0ao_to_sd_jtag_pins\0sd_to_ao_jtag_pins"; | |
| pinctrl-0 = < 0x45 >; | |
| pinctrl-1 = < 0x46 >; | |
| pinctrl-2 = < 0x47 >; | |
| pinctrl-3 = < 0x48 >; | |
| pinctrl-4 = < 0x49 >; | |
| pinctrl-5 = < 0x4a >; | |
| pinctrl-6 = < 0x4b >; | |
| pinctrl-7 = < 0x4c >; | |
| pinctrl-8 = < 0x4d >; | |
| sd { | |
| status = "okay"; | |
| pinname = "sd"; | |
| ocr_avail = < 0x200080 >; | |
| caps = "MMC_CAP_4_BIT_DATA\0MMC_CAP_MMC_HIGHSPEED\0MMC_CAP_SD_HIGHSPEED"; | |
| f_min = < 0x61a80 >; | |
| f_max = < 0x5f5e100 >; | |
| max_req_size = < 0x20000 >; | |
| gpio_dat3 = < 0x34 0x2e 0x00 >; | |
| jtag_pin = < 0x34 0x2a 0x00 >; | |
| gpio_cd = < 0x34 0x30 0x00 >; | |
| irq_in = < 0x03 >; | |
| irq_out = < 0x05 >; | |
| card_type = < 0x05 >; | |
| }; | |
| }; | |
| sdio { | |
| compatible = "amlogic, aml_sd_emmc"; | |
| dev_name = "aml_newsd.0"; | |
| status = "okay"; | |
| reg = < 0x00 0xd0070000 0x00 0x2000 >; | |
| interrupts = < 0x00 0xd8 0x04 >; | |
| pinctrl-names = "sdio_clk_cmd_pins\0sdio_all_pins"; | |
| pinctrl-0 = < 0x4e >; | |
| pinctrl-1 = < 0x4f >; | |
| sdio { | |
| status = "okay"; | |
| pinname = "sdio"; | |
| ocr_avail = < 0x200080 >; | |
| caps = "MMC_CAP_4_BIT_DATA\0MMC_CAP_MMC_HIGHSPEED\0MMC_CAP_SD_HIGHSPEED\0MMC_CAP_NONREMOVABLE\0MMC_CAP_UHS_SDR12\0MMC_CAP_UHS_SDR25\0MMC_CAP_UHS_SDR50\0MMC_CAP_UHS_SDR104\0MMC_PM_KEEP_POWER\0MMC_CAP_SDIO_IRQ"; | |
| f_min = < 0x61a80 >; | |
| f_max = < 0xbebc200 >; | |
| max_req_size = < 0x20000 >; | |
| card_type = < 0x03 >; | |
| }; | |
| }; | |
| nand { | |
| compatible = "amlogic, aml_nand"; | |
| dev_name = "nand"; | |
| status = "disabled"; | |
| reg = < 0x00 0xd0074800 0x00 0x200 >; | |
| interrupts = < 0x00 0x22 0x01 >; | |
| pinctrl-names = "nand_rb_mod\0nand_norb_mod\0nand_cs_pins_only"; | |
| pinctrl-0 = < 0x50 0x51 0x52 >; | |
| pinctrl-1 = < 0x50 0x51 0x52 >; | |
| pinctrl-2 = < 0x53 >; | |
| device_id = < 0x00 >; | |
| plat-names = "nandnormal"; | |
| plat-num = < 0x01 >; | |
| plat-part-0 = < 0x54 >; | |
| normal { | |
| enable_pad = "ce0\0ce1\0ce2\0ce3"; | |
| busy_pad = "rb0"; | |
| linux,phandle = < 0x54 >; | |
| phandle = < 0x54 >; | |
| }; | |
| }; | |
| aml_nftl { | |
| compatible = "amlogic, nftl"; | |
| }; | |
| unifykey { | |
| compatible = "amlogic, unifykey"; | |
| status = "ok"; | |
| unifykey-num = < 0x0e >; | |
| unifykey-index-0 = < 0x55 >; | |
| unifykey-index-1 = < 0x56 >; | |
| unifykey-index-2 = < 0x57 >; | |
| unifykey-index-3 = < 0x58 >; | |
| unifykey-index-4 = < 0x59 >; | |
| unifykey-index-5 = < 0x5a >; | |
| unifykey-index-6 = < 0x5b >; | |
| unifykey-index-7 = < 0x5c >; | |
| unifykey-index-8 = < 0x5d >; | |
| unifykey-index-9 = < 0x5e >; | |
| unifykey-index-10 = < 0x5f >; | |
| unifykey-index-11 = < 0x60 >; | |
| unifykey-index-12 = < 0x61 >; | |
| unifykey-index-13 = < 0x62 >; | |
| key_0 { | |
| key-name = "usid"; | |
| key-device = "normal"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x55 >; | |
| phandle = < 0x55 >; | |
| }; | |
| key_1 { | |
| key-name = "mac"; | |
| key-device = "normal"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x56 >; | |
| phandle = < 0x56 >; | |
| }; | |
| key_2 { | |
| key-name = "hdcp"; | |
| key-device = "secure"; | |
| key-type = "sha1"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x57 >; | |
| phandle = < 0x57 >; | |
| }; | |
| key_3 { | |
| key-name = "secure_boot_set"; | |
| key-device = "efuse"; | |
| key-permit = "write"; | |
| linux,phandle = < 0x58 >; | |
| phandle = < 0x58 >; | |
| }; | |
| key_4 { | |
| key-name = "mac_bt"; | |
| key-device = "normal"; | |
| key-permit = "read\0write\0del"; | |
| key-type = "mac"; | |
| linux,phandle = < 0x59 >; | |
| phandle = < 0x59 >; | |
| }; | |
| key_5 { | |
| key-name = "mac_wifi"; | |
| key-device = "normal"; | |
| key-permit = "read\0write\0del"; | |
| key-type = "mac"; | |
| linux,phandle = < 0x5a >; | |
| phandle = < 0x5a >; | |
| }; | |
| key_6 { | |
| key-name = "hdcp2_tx"; | |
| key-device = "normal"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x5b >; | |
| phandle = < 0x5b >; | |
| }; | |
| key_7 { | |
| key-name = "hdcp2_rx"; | |
| key-device = "normal"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x5c >; | |
| phandle = < 0x5c >; | |
| }; | |
| key_8 { | |
| key-name = "widevinekeybox"; | |
| key-device = "secure"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x5d >; | |
| phandle = < 0x5d >; | |
| }; | |
| key_9 { | |
| key-name = "deviceid"; | |
| key-device = "normal"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x5e >; | |
| phandle = < 0x5e >; | |
| }; | |
| key_10 { | |
| key-name = "hdcp22_fw_private"; | |
| key-device = "secure"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x5f >; | |
| phandle = < 0x5f >; | |
| }; | |
| key_11 { | |
| key-name = "PlayReadykeybox25"; | |
| key-device = "secure"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x60 >; | |
| phandle = < 0x60 >; | |
| }; | |
| key_12 { | |
| key-name = "prpubkeybox"; | |
| key-device = "secure"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x61 >; | |
| phandle = < 0x61 >; | |
| }; | |
| key_13 { | |
| key-name = "prprivkeybox"; | |
| key-device = "secure"; | |
| key-permit = "read\0write\0del"; | |
| linux,phandle = < 0x62 >; | |
| phandle = < 0x62 >; | |
| }; | |
| }; | |
| amhdmitx { | |
| compatible = "amlogic, amhdmitx"; | |
| dev_name = "amhdmitx"; | |
| status = "okay"; | |
| vend-data = < 0x63 >; | |
| hdmi5v_pwr_ctrl = < 0x34 0x13 0x01 >; | |
| pinctrl-names = "hdmitx_hpd\0hdmitx_ddc"; | |
| pinctrl-0 = < 0x64 >; | |
| pinctrl-1 = < 0x65 >; | |
| interrupts = < 0x00 0x39 0x01 >; | |
| interrupt-names = "hdmitx_hpd"; | |
| clocks = < 0x06 0x0b 0x06 0x0c 0x06 0x0d 0x06 0x0e 0x06 0x0f 0x06 0x16 >; | |
| clock-names = "hdmitx_clk_sys\0hdmitx_clk_encp\0hdmitx_clk_enci\0hdmitx_clk_pixel\0hdmitx_clk_phy\0hdmitx_clk_vid"; | |
| gpio_i2c_en = < 0x01 >; | |
| #address-cells = < 0x02 >; | |
| #size-cells = < 0x02 >; | |
| ranges; | |
| vend_data { | |
| vendor_name = "Amlogic"; | |
| vendor_id = < 0x00 >; | |
| product_desc = "MBox Meson Ref"; | |
| linux,phandle = < 0x63 >; | |
| phandle = < 0x63 >; | |
| }; | |
| }; | |
| aocec { | |
| compatible = "amlogic, amlogic-aocec"; | |
| device_name = "aocec"; | |
| status = "okay"; | |
| vendor_name = "Amlogic"; | |
| vendor_id = < 0x00 >; | |
| product_desc = "GXBB Mbox"; | |
| cec_osd_string = "MBox"; | |
| port_num = < 0x01 >; | |
| arc_port_mask = < 0x00 >; | |
| interrupts = < 0x00 0xc7 0x01 >; | |
| interrupt-names = "hdmi_aocec"; | |
| pinctrl-names = "hdmitx_aocec"; | |
| pinctrl-0 = < 0x66 >; | |
| reg = < 0x00 0xc810023c 0x00 0x04 0x00 0xc8100000 0x00 0x200 >; | |
| }; | |
| tvout { | |
| compatible = "amlogic, tvout"; | |
| dev_name = "tvout"; | |
| status = "okay"; | |
| }; | |
| i2c_gpio { | |
| compatible = "i2c-gpio"; | |
| status = "okay"; | |
| dev_name = "i2c-gpio"; | |
| i2c-gpio,delay-us = < 0x0a >; | |
| gpios = < 0x34 0x11 0x00 0x34 0x12 0x00 >; | |
| #address-cells = < 0x02 >; | |
| #size-cells = < 0x02 >; | |
| i2c-gpio,timeout-ms = < 0x0a >; | |
| i2c_gpio_edid { | |
| compatible = "i2c-gpio-edid"; | |
| reg = < 0x50 0x00 0x00 0x00 >; | |
| }; | |
| }; | |
| serial@c81004c0 { | |
| compatible = "amlogic, meson-uart"; | |
| reg = < 0x00 0xc81004c0 0x00 0x18 >; | |
| interrupts = < 0x00 0xc1 0x01 >; | |
| status = "okay"; | |
| clocks = < 0x06 0x02 >; | |
| clock-names = "clk_uart"; | |
| xtal_tick_en = < 0x01 >; | |
| fifosize = < 0x40 >; | |
| pinctrl-names = "default"; | |
| support-sysrq = < 0x00 >; | |
| }; | |
| serial@c11084c0 { | |
| compatible = "amlogic, meson-uart"; | |
| reg = < 0x00 0xc11084c0 0x00 0x18 >; | |
| interrupts = < 0x00 0x1a 0x01 >; | |
| status = "okay"; | |
| clocks = < 0x06 0x02 >; | |
| clock-names = "clk_uart"; | |
| fifosize = < 0x80 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x67 >; | |
| resets = < 0x06 0x0d >; | |
| }; | |
| serial@c11084dc { | |
| compatible = "amlogic, meson-uart"; | |
| reg = < 0x00 0xc11084dc 0x00 0x18 >; | |
| interrupts = < 0x00 0x4b 0x01 >; | |
| status = "disable"; | |
| clocks = < 0x06 0x02 >; | |
| clock-names = "clk_uart"; | |
| fifosize = < 0x40 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x68 >; | |
| resets = < 0x06 0x30 >; | |
| }; | |
| serial@c1108700 { | |
| compatible = "amlogic, meson-uart"; | |
| reg = < 0x00 0xc1108700 0x00 0x18 >; | |
| interrupts = < 0x00 0x5d 0x01 >; | |
| status = "disable"; | |
| clocks = < 0x06 0x02 >; | |
| clock-names = "clk_uart"; | |
| fifosize = < 0x40 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x69 >; | |
| resets = < 0x06 0x4f >; | |
| }; | |
| serial@c81004e0 { | |
| compatible = "amlogic, meson-uart"; | |
| reg = < 0x00 0xc81004e0 0x00 0x18 >; | |
| interrupts = < 0x00 0xc5 0x01 >; | |
| status = "disable"; | |
| clocks = < 0x06 0x02 >; | |
| clock-names = "clk_uart"; | |
| fifosize = < 0x40 >; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = < 0x6a >; | |
| }; | |
| canvas { | |
| compatible = "amlogic, meson, canvas"; | |
| dev_name = "amlogic-canvas"; | |
| status = "ok"; | |
| reg = < 0x00 0xc8838000 0x00 0x400 >; | |
| }; | |
| rdma { | |
| compatible = "amlogic, meson, rdma"; | |
| dev_name = "amlogic-rdma"; | |
| status = "ok"; | |
| interrupts = < 0x00 0x59 0x01 >; | |
| interrupt-names = "rdma"; | |
| }; | |
| dwc3@c9000000 { | |
| compatible = "synopsys, dwc3"; | |
| reg = < 0x00 0xc9000000 0x00 0x100000 >; | |
| interrupts = < 0x00 0x1e 0x04 >; | |
| usb-phy = < 0x6b 0x6c >; | |
| cpu-type = "gxl"; | |
| clock-src = "usb3.0"; | |
| }; | |
| usb2phy@d0078000 { | |
| compatible = "amlogic, amlogic-new-usb2"; | |
| portnum = < 0x03 >; | |
| reg = < 0x00 0xd0078000 0x00 0x80 >; | |
| linux,phandle = < 0x6b >; | |
| phandle = < 0x6b >; | |
| }; | |
| usb3phy@d0078080 { | |
| compatible = "amlogic, amlogic-new-usb3"; | |
| portnum = < 0x00 >; | |
| reg = < 0x00 0xd0078080 0x00 0x20 >; | |
| linux,phandle = < 0x6c >; | |
| phandle = < 0x6c >; | |
| }; | |
| dwc2_a { | |
| compatible = "amlogic,dwc2"; | |
| device_name = "dwc2_a"; | |
| reg = < 0x00 0xc9100000 0x00 0x40000 >; | |
| status = "okay"; | |
| interrupts = < 0x00 0x1f 0x04 >; | |
| pl-periph-id = < 0x00 >; | |
| clock-src = "usb0"; | |
| port-id = < 0x00 >; | |
| port-type = < 0x02 >; | |
| port-speed = < 0x00 >; | |
| port-config = < 0x00 >; | |
| port-dma = < 0x00 >; | |
| port-id-mode = < 0x00 >; | |
| usb-fifo = < 0x2d8 >; | |
| cpu-type = "gxl"; | |
| controller-type = < 0x01 >; | |
| phy-reg = < 0xd0078000 >; | |
| phy-reg-size = < 0xa0 >; | |
| resets = < 0x06 0x3a 0x06 0x48 0x06 0x36 >; | |
| reset-names = "usb_general\0usb1\0usb1_to_ddr"; | |
| }; | |
| I2S { | |
| #sound-dai-cells = < 0x00 >; | |
| resets = < 0x06 0x26 0x06 0x12 0x06 0x28 0x06 0x29 0x06 0x2a 0x06 0x2b 0x06 0x2c 0x06 0x2d 0x06 0x2f 0x06 0x8e 0x06 0x22 >; | |
| reset-names = "top_glue\0aud_buf\0i2s_out\0amclk_measure\0aififo2\0aud_mixer\0mixer_reg\0adc\0top_level\0aoclk\0aud_in"; | |
| clocks = < 0x06 0x21 0x06 0x22 >; | |
| clock-names = "mpll2\0mclk"; | |
| compatible = "amlogic, aml-i2s-dai"; | |
| linux,phandle = < 0x78 >; | |
| phandle = < 0x78 >; | |
| }; | |
| SPDIF { | |
| #sound-dai-cells = < 0x00 >; | |
| compatible = "amlogic, aml-spdif-dai"; | |
| resets = < 0x06 0x27 0x06 0x90 >; | |
| reset-names = "iec958\0iec958_amclk"; | |
| clocks = < 0x06 0x20 0x06 0x24 0x06 0x22 0x06 0x25 0x06 0x0a >; | |
| clock-names = "mpll1\0i958\0mclk\0spdif\0clk_81"; | |
| linux,phandle = < 0x79 >; | |
| phandle = < 0x79 >; | |
| }; | |
| PCM { | |
| #sound-dai-cells = < 0x00 >; | |
| compatible = "amlogic, aml-pcm-dai"; | |
| pinctrl-names = "aml_audio_btpcm"; | |
| pinctrl-0 = < 0x6d >; | |
| clocks = < 0x06 0x1f 0x06 0x2a 0x06 0x2b >; | |
| clock-names = "mpll0\0pcm_mclk\0pcm_sclk"; | |
| pcm_mode = < 0x01 >; | |
| linux,phandle = < 0x7a >; | |
| phandle = < 0x7a >; | |
| }; | |
| i2s_platform { | |
| compatible = "amlogic, aml-i2s"; | |
| interrupts = < 0x00 0x1d 0x01 >; | |
| linux,phandle = < 0x76 >; | |
| phandle = < 0x76 >; | |
| }; | |
| pcm_platform { | |
| compatible = "amlogic, aml-pcm"; | |
| linux,phandle = < 0x77 >; | |
| phandle = < 0x77 >; | |
| }; | |
| spdif_codec { | |
| #sound-dai-cells = < 0x00 >; | |
| compatible = "amlogic, aml-spdif-codec"; | |
| pinctrl-names = "aml_audio_spdif"; | |
| pinctrl-0 = < 0x6e >; | |
| linux,phandle = < 0x7c >; | |
| phandle = < 0x7c >; | |
| }; | |
| pcm_codec { | |
| #sound-dai-cells = < 0x00 >; | |
| compatible = "amlogic, pcm2BT-codec"; | |
| linux,phandle = < 0x7d >; | |
| phandle = < 0x7d >; | |
| }; | |
| dummy { | |
| #sound-dai-cells = < 0x00 >; | |
| compatible = "amlogic, aml_dummy_codec"; | |
| status = "disable"; | |
| }; | |
| t9015 { | |
| #sound-dai-cells = < 0x00 >; | |
| compatible = "amlogic, aml_codec_T9015"; | |
| reg = < 0x00 0xc8832000 0x00 0x14 >; | |
| status = "okay"; | |
| linux,phandle = < 0x7b >; | |
| phandle = < 0x7b >; | |
| }; | |
| aml_m8_snd { | |
| compatible = "aml, aml_snd_m8"; | |
| status = "okay"; | |
| aml-sound-card,format = "i2s"; | |
| aml_sound_card,name = "AML-M8AUDIO"; | |
| aml,audio-routing = "Ext Spk\0LOUTL\0Ext Spk\0LOUTR"; | |
| mute_gpio-gpios = < 0x34 0x15 0x00 >; | |
| mute_inv; | |
| hp_disable; | |
| hp_paraments = < 0x320 0x12c 0x00 0x05 0x01 >; | |
| pinctrl-names = "aml_snd_m8"; | |
| pinctrl-0 = < 0x6f >; | |
| cpu_list = < 0x70 0x71 0x72 >; | |
| codec_list = < 0x73 0x74 0x75 >; | |
| plat_list = < 0x76 0x76 0x77 >; | |
| cpudai0 { | |
| sound-dai = < 0x78 >; | |
| linux,phandle = < 0x70 >; | |
| phandle = < 0x70 >; | |
| }; | |
| cpudai1 { | |
| sound-dai = < 0x79 >; | |
| linux,phandle = < 0x71 >; | |
| phandle = < 0x71 >; | |
| }; | |
| cpudai2 { | |
| sound-dai = < 0x7a >; | |
| linux,phandle = < 0x72 >; | |
| phandle = < 0x72 >; | |
| }; | |
| codec0 { | |
| sound-dai = < 0x7b >; | |
| linux,phandle = < 0x73 >; | |
| phandle = < 0x73 >; | |
| }; | |
| codec1 { | |
| sound-dai = < 0x7c >; | |
| linux,phandle = < 0x74 >; | |
| phandle = < 0x74 >; | |
| }; | |
| codec2 { | |
| sound-dai = < 0x7d >; | |
| linux,phandle = < 0x75 >; | |
| phandle = < 0x75 >; | |
| }; | |
| }; | |
| gpio_keypad { | |
| compatible = "amlogic, gpio_keypad"; | |
| status = "okay"; | |
| scan_period = < 0x14 >; | |
| key_num = < 0x01 >; | |
| key_name = "power"; | |
| key_code = < 0x74 >; | |
| key_pin = < 0x35 0x02 0x00 >; | |
| irq_keyup = < 0x06 >; | |
| irq_keydown = < 0x07 >; | |
| }; | |
| aml-sensor@0 { | |
| compatible = "amlogic, aml-thermal"; | |
| device_name = "thermal"; | |
| #thermal-sensor-cells = < 0x01 >; | |
| linux,phandle = < 0x7e >; | |
| phandle = < 0x7e >; | |
| cooling_devices { | |
| cpufreq_cool_cluster0 { | |
| min_state = < 0xf4240 >; | |
| dyn_coeff = < 0x8c >; | |
| cluster_id = < 0x00 >; | |
| node_name = "cluster0"; | |
| device_type = "cpufreq"; | |
| }; | |
| cpufreq_cool_cluster1 { | |
| min_state = < 0x7a120 >; | |
| dyn_coeff = < 0x8c >; | |
| cluster_id = < 0x01 >; | |
| node_name = "cluster1"; | |
| device_type = "cpufreq"; | |
| }; | |
| cpucore_cool_cluster0 { | |
| min_state = < 0x01 >; | |
| dyn_coeff = < 0x00 >; | |
| cluster_id = < 0x00 >; | |
| node_name = "cpu_core_cluster0"; | |
| device_type = "cpucore"; | |
| }; | |
| cpucore_cool_cluster1 { | |
| min_state = < 0x01 >; | |
| dyn_coeff = < 0x00 >; | |
| cluster_id = < 0x01 >; | |
| node_name = "cpu_core_cluster1"; | |
| device_type = "cpucore"; | |
| }; | |
| gpufreq_cool { | |
| min_state = < 0x190 >; | |
| dyn_coeff = < 0x1b5 >; | |
| cluster_id = < 0x00 >; | |
| node_name = "t82x"; | |
| device_type = "gpufreq"; | |
| }; | |
| gpucore_cool { | |
| min_state = < 0x01 >; | |
| dyn_coeff = < 0x00 >; | |
| cluster_id = < 0x00 >; | |
| node_name = "thermal_gpu_cores"; | |
| device_type = "gpucore"; | |
| }; | |
| }; | |
| cpu_core_cluster0 { | |
| #cooling-cells = < 0x02 >; | |
| linux,phandle = < 0x82 >; | |
| phandle = < 0x82 >; | |
| }; | |
| cpu_core_cluster1 { | |
| #cooling-cells = < 0x02 >; | |
| linux,phandle = < 0x83 >; | |
| phandle = < 0x83 >; | |
| }; | |
| thermal_gpu_cores { | |
| #cooling-cells = < 0x02 >; | |
| linux,phandle = < 0x85 >; | |
| phandle = < 0x85 >; | |
| }; | |
| }; | |
| thermal-zones { | |
| soc_thermal { | |
| polling-delay = < 0x3e8 >; | |
| polling-delay-passive = < 0x64 >; | |
| sustainable-power = < 0x992 >; | |
| thermal-sensors = < 0x7e 0x03 >; | |
| trips { | |
| trip-point@0 { | |
| temperature = < 0x11170 >; | |
| hysteresis = < 0x3e8 >; | |
| type = "passive"; | |
| }; | |
| trip-point@1 { | |
| temperature = < 0x13880 >; | |
| hysteresis = < 0x3e8 >; | |
| type = "passive"; | |
| linux,phandle = < 0x7f >; | |
| phandle = < 0x7f >; | |
| }; | |
| trip-point@2 { | |
| temperature = < 0x14c08 >; | |
| hysteresis = < 0x1388 >; | |
| type = "hot"; | |
| }; | |
| trip-point@3 { | |
| temperature = < 0x3f7a0 >; | |
| hysteresis = < 0x3e8 >; | |
| type = "critical"; | |
| }; | |
| }; | |
| cooling-maps { | |
| cpufreq_cooling_map0 { | |
| trip = < 0x7f >; | |
| cooling-device = < 0x80 0x00 0x04 >; | |
| contribution = < 0x400 >; | |
| }; | |
| cpufreq_cooling_map1 { | |
| trip = < 0x7f >; | |
| cooling-device = < 0x81 0x00 0x04 >; | |
| contribution = < 0x400 >; | |
| }; | |
| cpucore_cooling_map0 { | |
| trip = < 0x7f >; | |
| cooling-device = < 0x82 0x00 0x03 >; | |
| contribution = < 0x400 >; | |
| }; | |
| cpucore_cooling_map1 { | |
| trip = < 0x7f >; | |
| cooling-device = < 0x83 0x00 0x03 >; | |
| contribution = < 0x400 >; | |
| }; | |
| gpufreq_cooling_map { | |
| trip = < 0x7f >; | |
| cooling-device = < 0x84 0x00 0x04 >; | |
| contribution = < 0x400 >; | |
| }; | |
| gpucore_cooling_map { | |
| trip = < 0x7f >; | |
| cooling-device = < 0x85 0x00 0x02 >; | |
| contribution = < 0x400 >; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment