-
-
Save agrajag9/e3991573a274e59f58a0b520d2dcd5d2 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# | |
# HONEYCOMB -- kernel configuration file for FreeBSD 13.0-STABLE/arm64 on SolidRun LX2160a Honeycomb | |
# | |
# For more information on this file, please read the config(5) manual page, | |
# and/or the handbook section on Kernel Configuration Files: | |
# | |
# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html | |
# | |
# The handbook is also available locally in /usr/share/doc/handbook | |
# if you've installed the doc distribution, otherwise always see the | |
# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the | |
# latest information. | |
# | |
# An exhaustive list of options and more detailed explanations of the | |
# device lines is also present in the ../../conf/NOTES and NOTES files. | |
# If you are in doubt as to the purpose or necessity of a line, check first | |
# in NOTES. | |
# | |
# $FreeBSD$ | |
cpu ARM64 | |
ident HONEYCOMB | |
#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols | |
#makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support | |
options SCHED_ULE # ULE scheduler | |
options NUMA # Non-Uniform Memory Architecture support | |
options PREEMPTION # Enable kernel thread preemption | |
options VIMAGE # Subsystem virtualization, e.g. VNET | |
options INET # InterNETworking | |
options INET6 # IPv6 communications protocols | |
options IPSEC_SUPPORT # Allow kldload of ipsec and tcpmd5 | |
options ROUTE_MPATH # Multipath routing support | |
options TCP_OFFLOAD # TCP offload | |
options TCP_HHOOK # hhook(9) framework for TCP | |
options TCP_RFC7413 # TCP Fast Open | |
options SCTP_SUPPORT # Allow kldload of SCTP | |
options FFS # Berkeley Fast Filesystem | |
options SOFTUPDATES # Enable FFS soft updates support | |
options UFS_ACL # Support for access control lists | |
options UFS_DIRHASH # Improve performance on big directories | |
options UFS_GJOURNAL # Enable gjournal-based UFS journaling | |
options QUOTA # Enable disk quotas for UFS | |
options MD_ROOT # MD is a potential root device | |
options NFSCL # Network Filesystem Client | |
options NFSD # Network Filesystem Server | |
options NFSLOCKD # Network Lock Manager | |
options NFS_ROOT # NFS usable as /, requires NFSCL | |
options MSDOSFS # MSDOS Filesystem | |
options CD9660 # ISO 9660 Filesystem | |
options PROCFS # Process filesystem (requires PSEUDOFS) | |
options PSEUDOFS # Pseudo-filesystem framework | |
options TMPFS # Efficient memory filesystem | |
options GEOM_RAID # Soft RAID functionality. | |
options GEOM_LABEL # Provides labelization | |
options EFIRT # EFI Runtime Services support | |
options COMPAT_FREEBSD32 # Compatible with FreeBSD/arm | |
options COMPAT_FREEBSD11 # Compatible with FreeBSD11 | |
options COMPAT_FREEBSD12 # Compatible with FreeBSD12 | |
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI | |
options KTRACE # ktrace(1) support | |
options STACK # stack(9) support | |
options SYSVSHM # SYSV-style shared memory | |
options SYSVMSG # SYSV-style message queues | |
options SYSVSEM # SYSV-style semaphores | |
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions | |
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. | |
options KBD_INSTALL_CDEV # install a CDEV entry in /dev | |
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) | |
options AUDIT # Security event auditing | |
options CAPABILITY_MODE # Capsicum capability mode | |
options CAPABILITIES # Capsicum capabilities | |
options MAC # TrustedBSD MAC Framework | |
options KDTRACE_FRAME # Ensure frames are compiled in | |
options KDTRACE_HOOKS # Kernel DTrace hooks | |
options DDB_CTF # Kernel ELF linker loads CTF data | |
options VFP # Floating-point support | |
options RACCT # Resource accounting framework | |
options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default | |
options RCTL # Resource limits | |
options INTRNG | |
options LINUX_BOOT_ABI # Boot using booti command from U-Boot | |
# Debugging support. Always need this: | |
options KDB # Enable kernel debugger support. | |
options KDB_TRACE # Print a stack trace for a panic. | |
# Kernel Sanitizers | |
#options COVERAGE # Generic kernel coverage. Used by KCOV | |
#options KCOV # Kernel Coverage Sanitizer | |
# Warning: KUBSAN can result in a kernel too large for loader to load | |
#options KUBSAN # Kernel Undefined Behavior Sanitizer | |
#options KCSAN # Kernel Concurrency Sanitizer | |
# Kernel dump features. | |
options EKCD # Support for encrypted kernel dumps | |
options GZIO # gzip-compressed kernel and user dumps | |
options ZSTDIO # zstd-compressed kernel and user dumps | |
options DEBUGNET # debugnet networking | |
options NETDUMP # netdump(4) client support | |
# Make an SMP-capable kernel by default | |
options SMP # Symmetric MultiProcessor Kernel | |
# SoC support | |
#options SOC_ALLWINNER_A64 | |
#options SOC_ALLWINNER_H5 | |
#options SOC_ALLWINNER_H6 | |
#options SOC_CAVM_THUNDERX | |
#options SOC_FREESCALE_IMX8 | |
#options SOC_HISI_HI6220 | |
#options SOC_INTEL_STRATIX10 | |
#options SOC_BRCM_BCM2837 | |
#options SOC_BRCM_BCM2838 | |
#options SOC_MARVELL_8K | |
#options SOC_NVIDIA_TEGRA210 | |
#options SOC_NXP_LS | |
#options SOC_ROCKCHIP_RK3328 | |
#options SOC_ROCKCHIP_RK3399 | |
#options SOC_XILINX_ZYNQ | |
# Timer drivers | |
#device a10_timer | |
# Annapurna Alpine drivers | |
#device al_ccu # Alpine Cache Coherency Unit | |
#device al_nb_service # Alpine North Bridge Service | |
#device al_iofic # I/O Fabric Interrupt Controller | |
#device al_serdes # Serializer/Deserializer | |
#device al_udma # Universal DMA | |
# Qualcomm Snapdragon drivers | |
#device qcom_gcc # Global Clock Controller | |
# CPU frequency control | |
device cpufreq | |
# Bus drivers | |
device pci | |
#device pci_n1sdp # ARM Neoverse N1 SDP PCI | |
#device al_pci # Annapurna Alpine PCI-E | |
options PCI_HP # PCI-Express native HotPlug | |
options PCI_IOV # PCI SR-IOV support | |
# Block devices | |
device ahci | |
device scbus | |
device da | |
# ATA/SCSI peripherals | |
device cd # CD | |
device pass # Passthrough device (direct ATA/SCSI access) | |
# NVM Express (NVMe) support | |
device nvme # base NVMe driver | |
options NVME_USE_NVD=0 # prefer the cam(4) based nda(4) driver | |
device nvd # expose NVMe namespaces as disks, depends on nvme | |
# DMA controller | |
#device a31_dmac | |
# GPIO / PINCTRL | |
#device a37x0_gpio # Marvell Armada 37x0 GPIO controller | |
#device aw_gpio # Allwinner GPIO controller | |
#device dwgpio # Synopsys DesignWare APB GPIO Controller | |
device gpio | |
#device gpioled | |
#device fdt_pinctrl | |
#device gpioregulator | |
#device ls1046_gpio # LS1046A GPIO controller | |
#device mv_gpio # Marvell GPIO controller | |
#device mvebu_pinctrl # Marvell Pinmux Controller | |
#device pl061 # Arm PL061 GPIO controller | |
#device rk_gpio # RockChip GPIO Controller | |
#device rk_pinctrl # RockChip Pinmux Controller | |
# I2C | |
#device a37x0_iic # Armada 37x0 I2C controller | |
#device aw_rsb # Allwinner Reduced Serial Bus | |
#device bcm2835_bsc # Broadcom BCM283x I2C bus | |
device iicbus | |
device iicmux | |
device iic | |
#device icee # Generic IIC eeprom | |
#device twsi # Allwinner I2C controller | |
#device pca9547 # NPX I2C bus multiplexer | |
#device pcf8563 # NXP Real-time clock/calendar | |
#device rk_i2c # RockChip I2C controller | |
#device syr827 # Silergy SYR827 PMIC | |
#device sy8106a # SY8106A Buck Regulator | |
#device vf_i2c # Freescale Vybrid I2C controller | |
#device fsliic # Freescale iMX I2C controller | |
# Clock and reset controllers | |
#device aw_ccu # Allwinner clock controller | |
# Interrupt controllers | |
#device aw_nmi # Allwinner NMI support | |
#device mv_cp110_icu # Marvell CP110 ICU | |
#device mv_ap806_gicp # Marvell AP806 GICP | |
#device mv_ap806_sei # Marvell AP806 SEI | |
# Real-time clock support | |
#device aw_rtc # Allwinner Real-time Clock | |
#device mv_rtc # Marvell Real-time Clock | |
# Crypto accelerators | |
device armv8crypto # ARMv8 OpenCrypto module | |
#device safexcel # Inside Secure EIP-97 | |
# Watchdog controllers | |
#device aw_wdog # Allwinner Watchdog | |
# Power management controllers | |
#device axp81x # X-Powers AXP81x PMIC | |
#device rk805 # RockChip RK805 PMIC | |
# EFUSE | |
#device aw_sid # Allwinner Secure ID EFUSE | |
# Thermal sensors | |
#device aw_thermal # Allwinner Thermal Sensor Controller | |
#device mv_thermal # Marvell Thermal Sensor Controller | |
# SPI | |
device spibus | |
#device a37x0_spi # Marvell Armada 37x0 SPI Controller | |
#device bcm2835_spi # Broadcom BCM283x SPI bus | |
#device rk_spi # RockChip SPI controller | |
# PWM | |
device pwm | |
#device aw_pwm | |
#device rk_pwm | |
# Console | |
device vt | |
device kbdmux | |
device vt_efifb | |
# EVDEV support | |
device evdev # input event device support | |
options EVDEV_SUPPORT # evdev support in legacy drivers | |
device uinput # install /dev/uinput cdev | |
#device aw_cir | |
# Serial (COM) ports | |
device uart # Generic UART driver | |
#device uart_imx # iMX8 UART | |
#device uart_msm # Qualcomm MSM UART driver | |
#device uart_mu # RPI3 aux port | |
#device uart_mvebu # Armada 3700 UART driver | |
#device uart_ns8250 # ns8250-type UART driver | |
#device uart_snps | |
#device pl011 | |
# PCI/PCI-X/PCIe Ethernet NICs that use iflib infrastructure | |
#device iflib | |
#device em # Intel PRO/1000 Gigabit Ethernet Family | |
#device ix # Intel 10Gb Ethernet Family | |
# Ethernet NICs | |
device mdio | |
device mii | |
device miibus # MII bus support | |
#device al_eth # Annapurna Alpine Ethernet NIC | |
#device awg # Allwinner EMAC Gigabit Ethernet | |
#device axa # AMD Opteron A1100 integrated NIC | |
#device cgem # Cadence GEM Gigabit Ethernet device | |
#device dwc_rk # Rockchip Designware | |
#device dwc_socfpga # Altera SOCFPGA Ethernet MAC | |
#device ffec # iMX FFEC | |
#device genet # Broadcom on RPi4 | |
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet | |
#device neta # Marvell Armada 370/38x/XP/3700 NIC | |
#device re # RealTek 8139C+/8169/8169S/8110S | |
#device smc # SMSC LAN91C111 | |
#device vnic # Cavium ThunderX NIC | |
# Etherswitch devices | |
#device etherswitch # Enable etherswitch support | |
#device miiproxy # Required for etherswitch | |
#device e6000sw # Marvell mv88e6085 based switches | |
# Pseudo devices. | |
device crypto # core crypto support | |
device loop # Network loopback | |
device ether # Ethernet support | |
device vlan # 802.1Q VLAN support | |
device tuntap # Packet tunnel. | |
device md # Memory "disks" | |
device gif # IPv6 and IPv4 tunneling | |
device firmware # firmware assist module | |
# EXT_RESOURCES pseudo devices | |
options EXT_RESOURCES | |
device clk | |
device phy | |
device hwreset | |
device nvmem | |
device regulator | |
device syscon | |
#device aw_syscon | |
# IO Domains | |
#device rk_iodomain | |
# The `bpf' device enables the Berkeley Packet Filter. | |
# Be aware of the administrative consequences of enabling this! | |
# Note that 'bpf' is required for DHCP. | |
device bpf # Berkeley packet filter | |
# USB support | |
options USB_DEBUG # enable debug msgs | |
options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. | |
#device aw_usbphy # Allwinner USB PHY | |
#device rk_usb2phy # Rockchip USB2PHY | |
#device rk_typec_phy # Rockchip TypeC PHY | |
#device dwcotg # DWC OTG controller | |
#device musb # Mentor Graphics USB OTG controller | |
device ohci # OHCI USB interface | |
device uhci # UHCI USB interface | |
device ehci # EHCI USB interface (USB 2.0) | |
#device ehci_mv # Marvell EHCI USB interface | |
device xhci # XHCI USB interface (USB 3.0) | |
#device dwc3 # Synopsys DWC controller | |
#device aw_dwc3 # Allwinner DWC3 controller | |
#device rk_dwc3 # Rockchip DWC3 controller | |
device usb # USB Bus (required) | |
device ukbd # Keyboard | |
device umass # Disks/Mass storage - Requires scbus and da | |
#device tegra210_xusb_fw # Tegra XUSB firmware | |
# USB ethernet support | |
#device muge | |
#device smcphy | |
#device smsc | |
#device ure | |
# Sound support | |
device sound | |
#device a10_codec | |
# MMC/SD/SDIO Card slot support | |
device sdhci | |
#device sdhci_xenon # Marvell Xenon SD/MMC controller | |
#device aw_mmc # Allwinner SD/MMC controller | |
device mmc # mmc/sd bus | |
device mmcsd # mmc/sd flash cards | |
device dwmmc | |
#device dwmmc_altera | |
#device dwmmc_hisi | |
#device rk_dwmmc | |
#device rk_emmcphy | |
# VirtIO support | |
device virtio | |
device virtio_pci | |
device virtio_mmio | |
device virtio_blk | |
device vtnet | |
# Chip-specific errata | |
#options THUNDERX_PASS_1_1_ERRATA | |
options FDT | |
device acpi | |
# DTBs | |
#makeoptions MODULES_EXTRA="dtb/allwinner dtb/freescale dtb/imx8 dtb/nvidia dtb/mv dtb/rockchip dtb/rpi" | |
# HID support | |
options HID_DEBUG # enable debug msgs | |
device hid # Generic HID support | |
options IICHID_SAMPLING # Workaround missing GPIO INTR support |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# | |
# HONEYCOMB-MMCCAM -- kernel configuration file for FreeBSD 13.0-STABLE/arm64 on SolidRun LX2160a Honeycomb | |
# | |
# Custom kernel for arm64 plus MMCCAM as opposed to the prior MMC stack. It is | |
# present to keep it building in tree since it wouldn't work in LINT. | |
# | |
# $FreeBSD$ | |
#NO_UNIVERSE | |
include HONEYCOMB | |
ident HONEYCOMB-MMCCAM | |
# Add CAMDEBUG stuff | |
options CAMDEBUG | |
options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_PROBE|CAM_DEBUG_PERIPH) | |
# pass(4) device | |
device pass | |
options MMCCAM | |
nodevice mmc | |
nodevice mmcsd |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment