dmesg.boot

---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #18 783c07471fb5-c268728(master)-dirty: Tue May 19 18:08:26 MSK 2020
    root@riverwood.lan:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG arm64
clang version 10.0.0
VT: init without driver.
module firmware already present!
Starting CPU 1 (1)
Starting CPU 2 (100)
Starting CPU 3 (101)
Starting CPU 4 (200)
Starting CPU 5 (201)
Starting CPU 6 (300)
Starting CPU 7 (301)
Starting CPU 8 (400)
Starting CPU 9 (401)
Starting CPU 10 (500)
Starting CPU 11 (501)
Starting CPU 12 (600)
Starting CPU 13 (601)
Starting CPU 14 (700)
Starting CPU 15 (701)
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
ACPI: IORT: Dropping unhandled type 1
random: entropy device external interface
MAP ed520000 mode 2 pages 112
MAP edb80000 mode 2 pages 80
MAP edbd0000 mode 2 pages 80
MAP edc20000 mode 2 pages 80
MAP edc70000 mode 2 pages 80
MAP edcc0000 mode 2 pages 160
MAP edd60000 mode 2 pages 80
MAP efe90000 mode 2 pages 80
MAP efee0000 mode 2 pages 80
MAP eff30000 mode 2 pages 80
MAP eff80000 mode 2 pages 80
MAP effd0000 mode 2 pages 80
MAP f0020000 mode 2 pages 80
MAP f0110000 mode 2 pages 80
MAP f0160000 mode 2 pages 80
MAP f01b0000 mode 2 pages 80
MAP f0200000 mode 2 pages 80
MAP f0250000 mode 2 pages 80
MAP f02a0000 mode 2 pages 80
MAP f02f0000 mode 2 pages 80
MAP f0340000 mode 2 pages 80
MAP fadc0000 mode 2 pages 48
MAP 2040000 mode 0 pages 16
MAP 20c0000 mode 0 pages 16
MAP 20000000 mode 0 pages 16384
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
acpi0: <NXP LX2160>
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
gic0: <ARM Generic Interrupt Controller v3.0> iomem 0x6000000-0x601ffff,0x6200000-0x63fffff on acpi0
its0: <ARM GIC Interrupt Translation Service> on gic0
generic_timer0: <ARM Generic Timer> irq 16,17,18 on acpi0
Timecounter "ARM MPCore Timecounter" frequency 25000050 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 25000050 Hz quality 1000
sbsawdt0: <ARM SBSA Generic Watchdog> iomem 0x2390000-0x2390fff,0x23a0000-0x23a0fff on acpi0
sbsawdt0: default watchdog period is 172 seconds
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
pmu0: <Performance Monitoring Unit> irq 19,20 on acpi0
pmu0: Unable to setup interrupt handler.
device_attach: pmu0 attach returned 6
uart0: <PrimeCell UART (PL011)> iomem 0x21c0000-0x21cffff irq 0 on acpi0
uart0: console (115200,n,8,1)
uart1: <PrimeCell UART (PL011)> iomem 0x21d0000-0x21dffff irq 1 on acpi0
uart2: <PrimeCell UART (PL011)> iomem 0x21e0000-0x21effff irq 2 on acpi0
uart3: <PrimeCell UART (PL011)> iomem 0x21f0000-0x21fffff irq 3 on acpi0
cpu0: <ACPI CPU> on acpi0
sdhci_fsl0: <Freescale eSDHC controller> iomem 0x2140000-0x214ffff irq 4 on acpi0
mmc0: <MMC/SD bus> on sdhci_fsl0
sdhci_fsl1: <Freescale eSDHC controller> iomem 0x2150000-0x215ffff irq 5 on acpi0
sdhci_fsl1-slot0: Hardware doesn't report any support voltages.
i2c0: <Vybrid Family Inter-Integrated Circuit (I2C)> iomem 0x2000000-0x200ffff irq 7 on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on i2c0
iicbus0: <unknown card> at addr 0x77
iic0: <I2C generic I/O> on iicbus0
i2c1: <Vybrid Family Inter-Integrated Circuit (I2C)> iomem 0x2040000-0x204ffff irq 8 on acpi0
iicbus1: <Philips I2C bus (ACPI-hinted)> on i2c1
iic1: <I2C generic I/O> on iicbus1
pcib0: <Generic PCI host controller> on acpi0
pci0: <PCI bus> on pcib0
pcib1: <Generic PCI host controller> on acpi0
pci1: <PCI bus> on pcib1
ahci0: <AHCI SATA controller> iomem 0x3200000-0x320ffff,0x700100520-0x700100523 on acpi0
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <AHCI SATA controller> iomem 0x3210000-0x321ffff on acpi0
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <AHCI SATA controller> iomem 0x3220000-0x322ffff on acpi0
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <AHCI SATA controller> iomem 0x3230000-0x323ffff on acpi0
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
xhci0: <Generic USB 3.0 controller> iomem 0x3100000-0x310ffff irq 14 on acpi0
xhci0: 64 bytes context size, 32-bit DMA
usbus0 on xhci0
xhci1: <Generic USB 3.0 controller> iomem 0x3110000-0x311ffff irq 15 on acpi0
xhci1: 64 bytes context size, 32-bit DMA
usbus1 on xhci1
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
ugen1.1: <Generic XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Generic XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmcsd0: 32GB <SDHC SB32G 8.0 SN DD1242F8 MFG 09/2017 by 3 SD> at mmc0 43.7MHz/4bit/65535-block
Release APs...Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
done
CPU  0: ARM Cortex-A72 r0p3 affinity:  0  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <>
      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
      Memory Model Features 1 = <8bit VMID>
      Memory Model Features 2 = <32bit CCIDX,48bit VA>
             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
CPU  1: ARM Cortex-A72 r0p3 affinity:  0  1
CPU  2: ARM Cortex-A72 r0p3 affinity:  1  0
CPU  3: ARM Cortex-A72 r0p3 affinity:  1  1
CPU  4: ARM Cortex-A72 r0p3 affinity:  2  0
CPU  5: ARM Cortex-A72 r0p3 affinity:  2  1
CPU  6: ARM Cortex-A72 r0p3 affinity:  3  0
CPU  7: ARM Cortex-A72 r0p3 affinity:  3  1
CPU  8: ARM Cortex-A72 r0p3 affinity:  4  0
CPU  9: ARM Cortex-A72 r0p3 affinity:  4  1
CPU 10: ARM Cortex-A72 r0p3 affinity:  5  0
CPU 11: ARM Cortex-A72 r0p3 affinity:  5  1
CPU 12: ARM Cortex-A72 r0p3 affinity:  6  0
CPU 13: ARM Cortex-A72 r0p3 affinity:  6  1
CPU 14: ARM Cortex-A72 r0p3 affinity:  7  0
CPU 15: ARM Cortex-A72 r0p3 affinity:  7  1
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x04b4 product 0x6502> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x04b4 product 0x6502, class 9/0, rev 2.10/50.10, addr 1> on usbus1
uhub2: MTT enabled
uhub2: 4 ports with 4 removable, self powered
ugen1.3: <vendor 0x0424 product 0x2514> at usbus1
uhub3 on uhub2
uhub3: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus1
uhub3: MTT enabled
uhub3: 4 ports with 3 removable, self powered
ugen1.4: <vendor 0x04b4 product 0x6500> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x04b4 product 0x6500, class 9/0, rev 3.00/50.10, addr 3> on usbus1
uhub4: 4 ports with 4 removable, self powered
ugen1.5: <TS-RDF5 Transcend> at usbus1
umass0 on uhub4
umass0: <TS-RDF5 Transcend, class 0/0, rev 3.00/0.37, addr 4> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:0:0: Attached to scbus0
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <TS-RDF5 SD  Transcend TS37> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 000000000039
da0: 400.000MB/s transfers
da0: 15193MB (31116288 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
sdhci_fsl0-slot0: Controller timeout
sdhci_fsl0-slot0: ============== REGISTER DUMP ==============
sdhci_fsl0-slot0: Sys addr: 0x00000000 | Version:  0x00000000
sdhci_fsl0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000001
sdhci_fsl0-slot0: Argument: 0x03b723ff | Trn mode: 0x00000012
sdhci_fsl0-slot0: Present:  0x00fd0000 | Host ctl: 0x00000003
sdhci_fsl0-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_fsl0-slot0: Wake-up:  0x00000000 | Clock:    0x00000807
sdhci_fsl0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_fsl0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_fsl0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_fsl0-slot0: Caps:     0x31760000 | Caps2:    0x00100010
sdhci_fsl0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_fsl0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_fsl0-slot0: ===========================================
mmcsd0: Error indicated: 1 Timeout
sdhci_fsl0-slot0: Controller timeout
sdhci_fsl0-slot0: ============== REGISTER DUMP ==============
sdhci_fsl0-slot0: Sys addr: 0x00000000 | Version:  0x00000000
sdhci_fsl0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000001
sdhci_fsl0-slot0: Argument: 0x03b723ff | Trn mode: 0x00000012
sdhci_fsl0-slot0: Present:  0x00fd0000 | Host ctl: 0x00000003
sdhci_fsl0-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_fsl0-slot0: Wake-up:  0x00000000 | Clock:    0x00000807
sdhci_fsl0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_fsl0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_fsl0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_fsl0-slot0: Caps:     0x31760000 | Caps2:    0x00100010
sdhci_fsl0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_fsl0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_fsl0-slot0: ===========================================
mmcsd0: Error indicated: 1 Timeout
sdhci_fsl0-slot0: Controller timeout
sdhci_fsl0-slot0: ============== REGISTER DUMP ==============
sdhci_fsl0-slot0: Sys addr: 0x00000000 | Version:  0x00000000
sdhci_fsl0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000004
sdhci_fsl0-slot0: Argument: 0x03b723c1 | Trn mode: 0x00000036
sdhci_fsl0-slot0: Present:  0x003d0206 | Host ctl: 0x00000003
sdhci_fsl0-slot0: Power:    0x0000000d | Blk gap:  0x00000000
sdhci_fsl0-slot0: Wake-up:  0x00000000 | Clock:    0x00000807
sdhci_fsl0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_fsl0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_fsl0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_fsl0-slot0: Caps:     0x31760000 | Caps2:    0x00100010
sdhci_fsl0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_fsl0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_fsl0-slot0: ===========================================
mmcsd0: Error indicated: 1 Timeout
mmcsd0: Error indicated: 1 Timeout
mmcsd0: Error indicated: 1 Timeout
mmcsd0: Error indicated: 1 Timeout
mmcsd0: Error indicated: 1 Timeout
GEOM: da0: the secondary GPT header is not in the last LBA.
GEOM: diskid/DISK-000000000039: the secondary GPT header is not in the last LBA.
random: unblocking device.
GEOM: diskid/DISK-000000000039: the secondary GPT header is not in the last LBA.
lo0: link state changed to UP