UTS Mekatronika Cavell

5lampu.ino

void setup()
{
    pinMode(1, OUTPUT);     // Set Pin 1 sebgai output LED 1
    pinMode(2, OUTPUT);     // Set Pin 2 sebgai output LED 1
    pinMode(3, OUTPUT);     // Set Pin 3 sebgai output LED 1
    pinMode(4, OUTPUT);     // Set Pin 4 sebgai output LED 1
    pinMode(5, OUTPUT);     // Set Pin 5 sebgai output LED 1
}

void loop()
{
    digitalWrite(1, HIGH);   // turn the LED 1 on (HIGH is the voltage level)
    delay(1000);             // wait for 1 second
    digitalWrite(1, LOW);    // turn the LED 1 off by making the voltage LOW
    delay(1000);             // wait for 1 second
    digitalWrite(2, HIGH);   // turn the LED 2 on (HIGH is the voltage level)
    delay(1000);             // wait for 1 second
    digitalWrite(2, LOW);    // turn the LED 2 off by making the voltage LOW
    delay(1000);             // wait for 1 second
    digitalWrite(3, HIGH);   // turn the LED 3 on (HIGH is the voltage level)
    delay(1000);             // wait for 1 second
    digitalWrite(3, LOW);    // turn the LED 3 off by making the voltage LOW
    delay(1000);             // wait for 1 second
    digitalWrite(4, HIGH);   // turn the LED 4 on (HIGH is the voltage level)
    delay(1000);             // wait for 1 second
    digitalWrite(4, LOW);    // turn the LED 4 off by making the voltage LOW
    delay(1000);             // wait for 1 second
    digitalWrite(5, HIGH);   // turn the LED 5 on (HIGH is the voltage level)
    delay(1000);             // wait for 1 second
    digitalWrite(5, LOW);    // turn the LED 5 off by making the voltage LOW
    delay(1000);             // wait for 1 second
}

lampukedip.ino

void setup()
{
    pinMode(1, OUTPUT);     // Set Pin 1 sebgai output LED 1
}

void loop()
{
    digitalWrite(1, HIGH);   // turn the LED on (HIGH is the voltage level)
    delay(2000);             // wait for 2 second
    digitalWrite(1, LOW);    // turn the LED off by making the voltage LOW
    delay(2000);             // wait for 2 second
}

MesinPress.ino

int StartButton = 1;      // Start Button connected to digital pin 1
int LimitSwitchBawah = 2; // Limit Switch Bawah connected to digital pin 2
int LimitSwitchAtas = 3;  // Limit Switch Atas connected to digital pin 3
int SolenoidA = 4;        // Solenoid A connected to digital pin 4
int SolenoidB = 5;        // Solenoid B connected to digital pin 5


void setup()
{
    pinMode(StartButton, INPUT);      // sets the digital pin 1 as input
    pinMode(LimitSwitchBawah, INPUT); // sets the digital pin 2 as input
    pinMode(LimitSwitchAtas, INPUT);  // sets the digital pin 3 as input
    pinMode(SolenoidA, OUTPUT);       // sets the digital pin 4 as output
    pinMode(SolenoidB, OUTPUT);       // sets the digital pin 5 as output
}

void loop()
{
    if(digitalRead(StartButton) == 1)      // read StartButton status
    {
        digitalWrite(SolenoidA, 1);        // turn on SolenoidA
    }
    if(digitalRead(LimitSwitchBawah) == 1) // read LimitSwitchBawah status
    {
        digitalWrite(SolenoidA, 0);        // turn off SolenoidA
        digitalWrite(SolenoidB, 1);        // turn on SolenoidB
    }
    if(digitalRead(LimitSwitchAtas) == 1)  // read LimitSwitchAtas status
    {
        digitalWrite(SolenoidB, 0);        // turn off SolenoidB
    }
}