gistfile1.txt

<3>[1134, insmod] [  165.850611] AR6K: ar6000_prealloc_init success. : 20
<4>[1134, insmod] [  165.852256] 
<4>[1134, insmod] [  165.852266]  vote for bt vreg. 
<4>[1134, insmod] [  165.853283] 
<4>[1134, insmod] [  165.853291]  vote for wlan4 vreg. 
<4>[1134, insmod] [  165.853849] 
<4>[1134, insmod] [  165.853859] Vote for A0 clock done
<4>[1134, insmod] [  165.854401] 
<4>[1134, insmod] [  165.854409]  vote for WLAN GPIO 134 done. 
<4>[1134, insmod] [  165.854429] Interface initialization success 
<4>[1134, insmod] [  165.855858] set_polling : no need to enable polling for slot 2 (as host->pdev_id) 
<4>[22, kworker/u:1] [  165.945706] mmc2: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[1135, sh] [  165.963289] do_exit: exit code=256
<4>[22, kworker/u:1] [  165.964911] mmc2: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[22, kworker/u:1] [  165.972929] mmc2: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[22, kworker/u:1] [  165.974583] mmc2: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[22, kworker/u:1] [  165.978458] mmc2: queuing unknown CIS tuple 0x80 (1 bytes)
<4>[22, kworker/u:1] [  165.978544] mmc2: queuing unknown CIS tuple 0x81 (1 bytes)
<4>[22, kworker/u:1] [  165.978629] mmc2: queuing unknown CIS tuple 0x82 (1 bytes)
<6>[22, kworker/u:1] [  166.081563] mmc2: new high speed SDIO card at address 0001
<1>[1137, AR6K startup] [  166.142761] AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systems
<1>[1137, AR6K startup] [  166.145356] android_readwrite_file: file /system/wifi/ath6k/AR6003/hw2.1.1/bdata.SD31.bin filp_open error
<1>[1137, AR6K startup] [  166.145401] Failed to get ath6k/AR6003/hw2.1.1/bdata.SD31.bin
<1>[1137, AR6K startup] [  166.145423] ar6000_avail: ar6000_sysfs_bmi_get_config failed