alarsyo/README.md

## README.md

      
    Raw
  

              README.md
            
          
    Installation :

Il suffit de copier ces 3 fichiers dans le repertoire ~/.config/i3/ de ta session.
Clique sur "Download zip" en haut a droite de cette page, puis :
[login_x@ ~] cd Downloads
[login_x@ ~/Downloads] unzip monfichier.zip
[login_x@ ~/Downloads] mv monfichier/* ~/.config/i3/

Maintenant recharge la configuration i3 en faisant Windows+C, puis Windows+R.
Raccourcis supplementaires :


Windows+F10, F11, F12 : mute, augmenter, baisser volume (icone du son jaune = muted)
Windows+Shift+P : mettre une fenetre dans le scratchpad (la fait disparaitre sans la fermer, pratique
pour switcher rapidement entre deux fenetres sans utiliser deux bureaux :)
Windows+P : faire apparaitre/disparaitre le scratchpad
Ctrl+Alt+L : Lockscreen

Tips & Tricks :


Le chemin vers le fond d'ecran se change tout en haut du fichier config
Pour changer entre l'effet blur et l'effet pixelised du lockscreen, commenter/decommenter une des deux lignes
commencant par convert dans i3lock.sh (une seule active a la fois !)
Mettre la barre de status en haut de l'ecran : dans config, ligne 160, rajouter position top sur une nouvelle ligne entre les accolades, sous le chemin vers i3status.conf


## config
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
exec_always --no-startup-id feh --bg-fill ~/.config/i3/background.jpg
# WARNING
# WARNING: This configuration file is a template for the i3-config-wizard to
# WARNING: generate a config which uses keysyms in your current layout. It does
# WARNING: not get loaded by i3. Please do not change it.
# WARNING

# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!

set $mod Mod4

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:monospace 8

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8

# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn’t scale on retina/hidpi displays.

# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod

# start a terminal
bindsym $mod+Return exec i3-sensible-terminal

# kill focused window
bindsym $mod+Shift+Q kill

# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop

# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right

# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right

# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+colon move right

# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right

# split in horizontal orientation
bindsym $mod+h split h

# split in vertical orientation
bindsym $mod+v split v

# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split

# toggle tiling / floating
bindsym $mod+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle

# focus the parent container
bindsym $mod+a focus parent

# focus the child container
#bindsym $mod+d focus child

# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10

# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10

# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym j resize shrink width 10 px or 10 ppt
        bindsym k resize grow height 10 px or 10 ppt
        bindsym l resize shrink height 10 px or 10 ppt
        bindsym semicolon resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left resize shrink width 10 px or 10 ppt
        bindsym Down resize grow height 10 px or 10 ppt
        bindsym Up resize shrink height 10 px or 10 ppt
        bindsym Right resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

bindsym $mod+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
        status_command i3status --config ~/.config/i3/i3status.conf
}

# Cool lockscreen
bindsym Control+Mod1+l exec bash ~/.config/i3/i3lock.sh

# Remove borders
new_window pixel

# Hide borders when there's only one window opened
hide_edge_borders smart

bindsym $mod+Shift+p move scratchpad
bindsym $mod+p scratchpad show

bindsym $mod+F10 exec pactl set-sink-mute 0 toggle
bindsym $mod+F11 exec pactl set-sink-volume 0 -5%
bindsym $mod+F12 exec pactl set-sink-volume 0 +5%

## i3lock.sh
#!/bin/bash

mkdir "/home/$USER/.tmp"

tmpbg="/home/$USER/.tmp/screen.png"

scrot "$tmpbg"
convert "$tmpbg" -scale 10% -scale 1000% "$tmpbg"

### Alternative blurred lockscreen
#convert "$tmpbg" -blur 0x4 "$tmpbg"

# -u hides the i3lock ring :
# i3lock -u -i "$tmpbg"
i3lock -i "$tmpbg"

rm -rf /home/$USER/.tmp

## i3status.conf
# i3status configuration file.
# see "man i3status" for documentation.

# It is important that this file is edited as UTF-8.
# The following line should contain a sharp s:
# ß
# If the above line is not correctly displayed, fix your editor first!

general {
        colors = true
        interval = 5
}

order += "disk /"
order += "ethernet _first_"
order += "load"
order += "volume master"
order += "tztime local"

volume master {
  format = "♪: %volume"
  device = "default"
  mixer = "Master"
  mixer_idx = 0
}

ethernet _first_ {
	format_up = "E: %ip (%speed)"
	format_down = "E: down"
	}

tztime local {
        format = "%H:%M:%S %d-%m-%Y"
}

load {
        format = "L: %1min"
}

disk "/" {
        format = "%avail"
}
	# This file has been auto-generated by i3-config-wizard(1).
	# It will not be overwritten, so edit it as you like.
	#
	# Should you change your keyboard layout some time, delete
	# this file and re-run i3-config-wizard(1).
	exec_always --no-startup-id feh --bg-fill ~/.config/i3/background.jpg
	# WARNING
	# WARNING: This configuration file is a template for the i3-config-wizard to
	# WARNING: generate a config which uses keysyms in your current layout. It does
	# WARNING: not get loaded by i3. Please do not change it.
	# WARNING

	# i3 config file (v4)
	#
	# Please see http://i3wm.org/docs/userguide.html for a complete reference!

	set $mod Mod4

	# Font for window titles. Will also be used by the bar unless a different font
	# is used in the bar {} block below.
	font pango:monospace 8

	# This font is widely installed, provides lots of unicode glyphs, right-to-left
	# text rendering and scalability on retina/hidpi displays (thanks to pango).
	#font pango:DejaVu Sans Mono 8

	# Before i3 v4.8, we used to recommend this one as the default:
	# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
	# The font above is very space-efficient, that is, it looks good, sharp and
	# clear in small sizes. However, its unicode glyph coverage is limited, the old
	# X core fonts rendering does not support right-to-left and this being a bitmap
	# font, it doesn’t scale on retina/hidpi displays.

	# Use Mouse+$mod to drag floating windows to their wanted position
	floating_modifier $mod

	# start a terminal
	bindsym $mod+Return exec i3-sensible-terminal

	# kill focused window
	bindsym $mod+Shift+Q kill

	# start dmenu (a program launcher)
	bindsym $mod+d exec dmenu_run
	# There also is the (new) i3-dmenu-desktop which only displays applications
	# shipping a .desktop file. It is a wrapper around dmenu, so you need that
	# installed.
	# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop

	# change focus
	bindsym $mod+j focus left
	bindsym $mod+k focus down
	bindsym $mod+l focus up
	bindsym $mod+semicolon focus right

	# alternatively, you can use the cursor keys:
	bindsym $mod+Left focus left
	bindsym $mod+Down focus down
	bindsym $mod+Up focus up
	bindsym $mod+Right focus right

	# move focused window
	bindsym $mod+Shift+j move left
	bindsym $mod+Shift+k move down
	bindsym $mod+Shift+l move up
	bindsym $mod+Shift+colon move right

	# alternatively, you can use the cursor keys:
	bindsym $mod+Shift+Left move left
	bindsym $mod+Shift+Down move down
	bindsym $mod+Shift+Up move up
	bindsym $mod+Shift+Right move right

	# split in horizontal orientation
	bindsym $mod+h split h

	# split in vertical orientation
	bindsym $mod+v split v

	# enter fullscreen mode for the focused container
	bindsym $mod+f fullscreen toggle

	# change container layout (stacked, tabbed, toggle split)
	bindsym $mod+s layout stacking
	bindsym $mod+w layout tabbed
	bindsym $mod+e layout toggle split

	# toggle tiling / floating
	bindsym $mod+Shift+space floating toggle

	# change focus between tiling / floating windows
	bindsym $mod+space focus mode_toggle

	# focus the parent container
	bindsym $mod+a focus parent

	# focus the child container
	#bindsym $mod+d focus child

	# switch to workspace
	bindsym $mod+1 workspace 1
	bindsym $mod+2 workspace 2
	bindsym $mod+3 workspace 3
	bindsym $mod+4 workspace 4
	bindsym $mod+5 workspace 5
	bindsym $mod+6 workspace 6
	bindsym $mod+7 workspace 7
	bindsym $mod+8 workspace 8
	bindsym $mod+9 workspace 9
	bindsym $mod+0 workspace 10

	# move focused container to workspace
	bindsym $mod+Shift+1 move container to workspace 1
	bindsym $mod+Shift+2 move container to workspace 2
	bindsym $mod+Shift+3 move container to workspace 3
	bindsym $mod+Shift+4 move container to workspace 4
	bindsym $mod+Shift+5 move container to workspace 5
	bindsym $mod+Shift+6 move container to workspace 6
	bindsym $mod+Shift+7 move container to workspace 7
	bindsym $mod+Shift+8 move container to workspace 8
	bindsym $mod+Shift+9 move container to workspace 9
	bindsym $mod+Shift+0 move container to workspace 10

	# reload the configuration file
	bindsym $mod+Shift+c reload
	# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
	bindsym $mod+Shift+r restart
	# exit i3 (logs you out of your X session)
	bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

	# resize window (you can also use the mouse for that)
	mode "resize" {
	# These bindings trigger as soon as you enter the resize mode

	# Pressing left will shrink the window’s width.
	# Pressing right will grow the window’s width.
	# Pressing up will shrink the window’s height.
	# Pressing down will grow the window’s height.
	bindsym j resize shrink width 10 px or 10 ppt
	bindsym k resize grow height 10 px or 10 ppt
	bindsym l resize shrink height 10 px or 10 ppt
	bindsym semicolon resize grow width 10 px or 10 ppt

	# same bindings, but for the arrow keys
	bindsym Left resize shrink width 10 px or 10 ppt
	bindsym Down resize grow height 10 px or 10 ppt
	bindsym Up resize shrink height 10 px or 10 ppt
	bindsym Right resize grow width 10 px or 10 ppt

	# back to normal: Enter or Escape
	bindsym Return mode "default"
	bindsym Escape mode "default"
	}

	bindsym $mod+r mode "resize"

	# Start i3bar to display a workspace bar (plus the system information i3status
	# finds out, if available)
	bar {
	status_command i3status --config ~/.config/i3/i3status.conf
	}

	# Cool lockscreen
	bindsym Control+Mod1+l exec bash ~/.config/i3/i3lock.sh

	# Remove borders
	new_window pixel

	# Hide borders when there's only one window opened
	hide_edge_borders smart

	bindsym $mod+Shift+p move scratchpad
	bindsym $mod+p scratchpad show

	bindsym $mod+F10 exec pactl set-sink-mute 0 toggle
	bindsym $mod+F11 exec pactl set-sink-volume 0 -5%
	bindsym $mod+F12 exec pactl set-sink-volume 0 +5%
	#!/bin/bash

	mkdir "/home/$USER/.tmp"

	tmpbg="/home/$USER/.tmp/screen.png"

	scrot "$tmpbg"
	convert "$tmpbg" -scale 10% -scale 1000% "$tmpbg"

	### Alternative blurred lockscreen
	#convert "$tmpbg" -blur 0x4 "$tmpbg"

	# -u hides the i3lock ring :
	# i3lock -u -i "$tmpbg"
	i3lock -i "$tmpbg"

	rm -rf /home/$USER/.tmp
	# i3status configuration file.
	# see "man i3status" for documentation.

	# It is important that this file is edited as UTF-8.
	# The following line should contain a sharp s:
	# ß
	# If the above line is not correctly displayed, fix your editor first!

	general {
	colors = true
	interval = 5
	}

	order += "disk /"
	order += "ethernet _first_"
	order += "load"
	order += "volume master"
	order += "tztime local"

	volume master {
	format = "♪: %volume"
	device = "default"
	mixer = "Master"
	mixer_idx = 0
	}

	ethernet _first_ {
	format_up = "E: %ip (%speed)"
	format_down = "E: down"
	}

	tztime local {
	format = "%H:%M:%S %d-%m-%Y"
	}

	load {
	format = "L: %1min"
	}

	disk "/" {
	format = "%avail"
	}