Skip to content

Instantly share code, notes, and snippets.

@alberts-s
Created October 11, 2015 20:57
Show Gist options
  • Save alberts-s/42d248066e05f2c97509 to your computer and use it in GitHub Desktop.
Save alberts-s/42d248066e05f2c97509 to your computer and use it in GitHub Desktop.
[ 0.000000] .text : 0xc0008000 - 0xc098638c (9721 kB)
[ 0.000000] .init : 0xc0987000 - 0xc0f8ae40 (6160 kB)
[ 0.000000] .data : 0xc0f8c000 - 0xc1007738 ( 494 kB)
[ 0.000000] .bss : 0xc1007eec - 0xc10e0400 ( 866 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:544
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39 (alberts00@Muffle) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #2 SMP PREEMPT Sun Oct 11 22:55:03 EEST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun8i
[ 0.000000] Ignoring tag cmdline (using the default kernel command line)
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] cma: CMA: reserved 256 MiB at 70000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c1004cc0, node_mem_map c10e1000
[ 0.000000] Normal zone: 1710 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 192850 pages, LIFO batch:31
[ 0.000000] HighMem zone: 594 pages used for memmap
[ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c19f8000 s11840 r8192 d12736 u32768
[ 0.000000] pcpu-alloc: s11840 r8192 d12736 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: earlyprintk=ttyS0,115200 loglevel=8 initcall_debug=0 console=ttyS0,115200 console=tty0 init=/init
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 758660k/758660k available, 289916k reserved, 8192K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc098638c (9721 kB)
[ 0.000000] .init : 0xc0987000 - 0xc0f8ae40 (6160 kB)
[ 0.000000] .data : 0xc0f8c000 - 0xc1007738 ( 494 kB)
[ 0.000000] .bss : 0xc1007eec - 0xc10e0400 ( 866 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:544
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.019915] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[ 0.019969] pid_max: default: 32768 minimum: 301
[ 0.020241] Mount-cache hash table entries: 512
[ 0.021121] Initializing cgroup subsys cpuacct
[ 0.021151] Initializing cgroup subsys freezer
[ 0.021198] CPU: Testing write buffer coherency: ok
[ 0.021251] ftrace: allocating 26204 entries in 77 pages
[ 0.050266] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.050299] [sunxi_smp_prepare_cpus] enter
[ 0.050341] Setting up static identity map for 0x406d2c90 - 0x406d2ce8
[ 0.051182] CPU1: Booted secondary processor
[ 0.051182] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.051314] CPU2: Booted secondary processor
[ 0.051314] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.051314] CPU3: Booted secondary processor
[ 0.051314] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.060174] Brought up 4 CPUs
[ 0.060257] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[ 0.060841] devtmpfs: initialized
[ 0.063132] wakeup src cnt is : 1.
[ 0.063153] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
[ 0.063176] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
[ 0.063200] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
[ 0.063225] sunxi pm init
[ 0.063357] pinctrl core: initialized pinctrl subsystem
[ 0.073914] NET: Registered protocol family 16
[ 0.074578] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.074578] script_sysfs_init success
[ 0.074578] sunxi_dump_init success
[ 0.074578] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[ 0.074578] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[ 0.074592] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.074627] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.074800] script config pll_video to 297 Mhz
[ 0.074825] script config pll_de to 864 Mhz
[ 0.074847] script config pll_ve to 402 Mhz
[ 0.074879] sunxi_default_clk_init
[ 0.074895] try to set pll6ahb1 to 200000000
[ 0.074921] try to set ahb clk source to pll6ahb1
[ 0.074939] set ahb clk source to pll6ahb1
[ 0.074957] try to set ahb1 to 200000000
[ 0.074975] try to set apb1 to 100000000
[ 0.075302] ===fe3o4==== sunxi_root_procfs_attach ret:0
[ 0.080807] bio: create slab <bio-0> at 0
[ 0.080807] [ARISC] :sunxi-arisc driver v1.04
[ 0.095592] [ARISC] :arisc version: [v0.1.34]
[ 0.173995] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
[ 0.180384] SCSI subsystem initialized
[ 0.180570] usbcore: registered new interface driver usbfs
[ 0.180646] usbcore: registered new interface driver hub
[ 0.180688] usbcore: registered new device driver usb
[ 0.180688] twi_chan_cfg()335 - [twi0] has no twi_regulator.
[ 0.180688] twi_chan_cfg()335 - [twi1] has no twi_regulator.
[ 0.180688] twi_chan_cfg()335 - [twi2] has no twi_regulator.
[ 0.180688] Linux video capture interface: v2.00
[ 0.180709] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.181186] Bluetooth: Core ver 2.16
[ 0.181234] NET: Registered protocol family 31
[ 0.181255] Bluetooth: HCI device and connection manager initialized
[ 0.181282] Bluetooth: HCI socket layer initialized
[ 0.181304] Bluetooth: L2CAP socket layer initialized
[ 0.181347] Bluetooth: SCO socket layer initialized
[ 0.181559] cfg80211: Calling CRDA to update world regulatory domain
[ 0.181636] Switching to clocksource arch_sys_counter
[ 0.192040] FS-Cache: Loaded
[ 0.192315] CacheFiles: Loaded
[ 0.202057] NET: Registered protocol family 2
[ 0.202324] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.202852] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.204466] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.205258] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.205281] TCP: reno registered
[ 0.205301] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205345] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205623] NET: Registered protocol family 1
[ 0.205962] RPC: Registered named UNIX socket transport module.
[ 0.205990] RPC: Registered udp transport module.
[ 0.206008] RPC: Registered tcp transport module.
[ 0.206025] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.545805] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
[ 0.545952] sunxi_reg_init enter
[ 0.546685] audit: initializing netlink socket (disabled)
[ 0.546743] type=2000 audit(0.540:1): initialized
[ 0.549831] highmem bounce pool size: 64 pages
[ 0.550825] NFS: Registering the id_resolver key type
[ 0.551173] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.551824] NTFS driver 2.1.30 [Flags: R/W].
[ 0.551947] fuse init (API version 7.18)
[ 0.552715] Btrfs loaded
[ 0.552751] msgmni has been set to 1465
[ 0.553766] io scheduler noop registered
[ 0.553793] io scheduler deadline registered
[ 0.553875] io scheduler cfq registered (default)
[ 0.554299] [DISP]disp_module_init
[ 0.554584] cmdline,disp=
[ 0.563412] [DISP] Fb_map_kernel_logo,line:925:Fb_map_kernel_logo failed!
[ 0.576152] Console: switching to colour frame buffer device 160x45
[ 0.589839] [DISP]disp_module_init finish
[ 0.590150] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[ 0.590579] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.590722] sw_uart_pm()890 - uart0 clk is already enable
[ 0.590851] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[ 0.782829] console [ttyS0] enabled
[ 1.216831] sunxi_cmatest_init enter
[ 1.380437] sunxi_cmatest_init success
[ 1.534370] loop: module loaded
[ 1.684331] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
[ 1.847559] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator.
[ 1.939137] tun: Universal TUN/TAP device driver, 1.6
[ 1.948563] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.960465] PPP generic driver version 2.4.2
[ 1.969265] PPP BSD Compression module registered
[ 1.978353] PPP Deflate Compression module registered
[ 1.989906] PPP MPPE Compression module registered
[ 1.999054] NET: Registered protocol family 24
[ 2.007762] PPTP driver version 0.8.5
[ 2.015714] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.046826] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.059599] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[ 2.072344] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[ 2.100038] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[ 2.110997] hub 1-0:1.0: USB hub found
[ 2.118999] hub 1-0:1.0: 1 port detected
[ 2.147495] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.160287] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
[ 2.173008] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
[ 2.200034] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
[ 2.210841] hub 2-0:1.0: USB hub found
[ 2.218756] hub 2-0:1.0: 1 port detected
[ 2.247188] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.259921] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 3
[ 2.272583] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
[ 2.300044] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
[ 2.310869] hub 3-0:1.0: USB hub found
[ 2.318826] hub 3-0:1.0: 1 port detected
[ 2.327325] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.358113] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.370622] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
[ 2.383049] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[ 2.454511] hub 4-0:1.0: USB hub found
[ 2.462641] hub 4-0:1.0: 1 port detected
[ 2.491204] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.503694] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 5
[ 2.516074] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
[ 2.584483] hub 5-0:1.0: USB hub found
[ 2.592523] hub 5-0:1.0: 1 port detected
[ 2.620977] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.633343] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 6
[ 2.645652] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
[ 2.714501] hub 6-0:1.0: USB hub found
[ 2.722580] hub 6-0:1.0: 1 port detected
[ 2.731058] Initializing USB Mass Storage driver...
[ 2.740554] usbcore: registered new interface driver usb-storage
[ 2.751156] USB Mass Storage support registered.
[ 2.760232] usbcore: registered new interface driver ums-alauda
[ 2.770764] usbcore: registered new interface driver ums-cypress
[ 2.781362] usbcore: registered new interface driver ums-datafab
[ 2.791902] usbcore: registered new interface driver ums_eneub6250
[ 2.802594] usbcore: registered new interface driver ums-freecom
[ 2.813046] usbcore: registered new interface driver ums-isd200
[ 2.823353] usbcore: registered new interface driver ums-jumpshot
[ 2.833826] usbcore: registered new interface driver ums-karma
[ 2.843852] usbcore: registered new interface driver ums-onetouch
[ 2.854115] usbcore: registered new interface driver ums-realtek
[ 2.864208] usbcore: registered new interface driver ums-sddr09
[ 2.874169] usbcore: registered new interface driver ums-sddr55
[ 2.884051] usbcore: registered new interface driver ums-usbat
[ 2.893884] usbcore: registered new interface driver usbserial
[ 2.903517] usbserial: USB Serial Driver core
[ 2.911509] usbcore: registered new interface driver option
[ 2.920863] USB Serial support registered for GSM modem (1-port)
[ 2.931203] file system registered
[ 2.939527] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.950465] android_usb gadget: Number of LUNs=3
[ 2.958767] lun0: LUN: removable file: (no medium)
[ 2.967353] lun1: LUN: removable file: (no medium)
[ 2.975878] lun2: LUN: removable file: (no medium)
[ 2.984654] android_usb gadget: android_usb ready
[ 2.993126] uinput result 0 , vmouse_init
[ 3.001380] mousedev: PS/2 mouse device common for all mice
[ 3.010889] sunxikbd_init failed.
[ 3.017674] ls_fetch_sysconfig_para: type err device_used = 0.
[ 3.027407] =========script_get_err============
[ 3.035480] ltr_init: ls_fetch_sysconfig_para err.
[ 3.044344] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[ 3.054881] i2c /dev entries driver
[ 3.062058] IR RC5(x) protocol handler initialized
[ 3.070532] sunxi tsc version 0.1
[ 3.077366] tscdev_init: tsc driver is disabled
[ 3.085519] sunxi cedar version 0.1
[ 3.092561] [cedar]: install start!!!
[ 3.099761] [cedar]: install end!!!
[ 3.106568] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[ 3.116636] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
[ 3.127993] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[ 3.141506] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[ 3.150859] timeout_to_interv, line 167
[ 3.158227] interv_to_timeout, line 189
[ 3.165568] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
[ 3.178170] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.190911] Bluetooth: HCI UART driver ver 2.2
[ 3.199239] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[ 3.212244] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.109 2014-12-4 20:51) Compiled in Oct 11 2015 at 22:45:11
[ 3.227394] [mmc]: get mmc0's sdc_power is null!
[ 3.236297] [mmc]: get mmc1's sdc_power is null!
[ 3.245164] [mmc]: get mmc1's 2xmode ok, val = 1
[ 3.254048] [mmc]: get mmc1's ddrmode ok, val = 1
[ 3.263094] [mmc]: get mmc2's sdc_power is null!
[ 3.272022] [mmc]: get mmc2's 2xmode ok, val = 1
[ 3.280615] [mmc]: get mmc2's ddrmode ok, val = 1
[ 3.289267] [mmc]: MMC host used card: 0x7, boot card: 0x5, io_card 2
[ 3.300818] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.315374] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.328496] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.329788] [mmc]: sdc0 power_supply is null
[ 3.350028] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.363757] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.379530] sunxi_leds_fetch_sysconfig_para script_parser_fetch "leds_para" leds_used = -1063626804
[ 3.392928] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
[ 3.404434] =========script_get_err============
[ 3.412887] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
[ 3.424571] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.425662] usbcore: registered new interface driver usbhid
[ 3.425667] usbhid: USB HID core driver
[ 3.457665] asoc: sndcodec <-> sunxi-codec mapping ok
[ 3.458492] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.480749] *******************Try sdio*******************
[ 3.491396] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
[ 3.503562] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[ 3.513402] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
[ 3.525883] oprofile: using arm/armv7-ca7
[ 3.526028] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
[ 3.526865] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
[ 3.526887] *******************Try sd *******************
[ 3.527527] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.527640] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.530114] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.551515] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.559257] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.559319] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.559418] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 3.559483] mmc0: new high speed SD card at address 0002
[ 3.674737] mmcblk0: mmc0:0002 00000 1.86 GiB
[ 3.683268] u32 classifier
[ 3.689764] Actions configured
[ 3.689859] mmcblk0: p1 p2
[ 3.690430] *******************sd init ok*******************
[ 3.690449] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.691977] [mmc]: sdc2 power_supply is null
[ 3.710023] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.747582] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 3.759258] Netfilter messages via NETLINK v0.30.
[ 3.768035] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 3.779821] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.779883] nf_conntrack version 0.5.0 (15950 buckets, 63800 max)
[ 3.804473] ctnetlink v0.93: registering with nfnetlink.
[ 3.814150] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 3.815120] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.839595] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 8, RTO !!
[ 3.851459] *******************Try sdio*******************
[ 3.851465] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 3.871752] xt_time: kernel timezone is -0000
[ 3.880294] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 3.892155] IPv4 over IPv4 tunneling driver
[ 3.900460] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 3.912563] gre: GRE over IPv4 demultiplexor driver
[ 3.921640] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 3.933327] ip_gre: GRE over IPv4 tunneling driver
[ 3.942290] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 3.954038] *******************Try sd *******************
[ 3.954570] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.954726] arp_tables: (C) 2002 David S. Miller
[ 3.954784] TCP: cubic registered
[ 3.954788] Initializing XFRM netlink socket
[ 3.997321] NET: Registered protocol family 10
[ 4.005715] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.018157] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.029911] Mobile IPv6
[ 4.036066] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.047799] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.057340] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.069124] *******************Try mmc*******************
[ 4.069286] IPv6 over IPv4 tunneling driver
[ 4.070162] NET: Registered protocol family 17
[ 4.070188] NET: Registered protocol family 15
[ 4.104231] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.104277] Bluetooth: RFCOMM TTY layer initialized
[ 4.104291] Bluetooth: RFCOMM socket layer initialized
[ 4.104297] Bluetooth: RFCOMM ver 1.11
[ 4.104302] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.104307] Bluetooth: BNEP filters: protocol multicast
[ 4.104315] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.104430] L2TP core driver, V2.0
[ 4.104447] PPPoL2TP kernel driver, V2.0
[ 4.104451] L2TP IP encapsulation support (L2TPv3)
[ 4.197889] L2TP netlink interface
[ 4.205126] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 1, RTO !!
[ 4.216675] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.216694] L2TP ethernet pseudowire support (L2TPv3)
[ 4.216700] Registering the dns_resolver key type
[ 4.247628] VFP support v0.3: [mmc]: sdc2 power_supply is null
[ 4.250360] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.251880] [mmc]: sdc2 power_supply is null
[ 4.270022] [mmc]: sdc2 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.292380] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.304004] implementor 41 architecture 2 part 30 variant 7 rev 5
[ 4.314261] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.325900] ThumbEE CPU extension supported.
[ 4.325909] [mmc]: sdc2 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.347813] Registering SWP/SWPB emulation handler
[ 4.348815] [mmc]: sdc2 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.370387] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 8, RTO !!
[ 4.382028] *******************Try sdio*******************
[ 4.382729] cmdline,disp=
[ 4.382756] [HDMI] power vcc-hdmi-18
[ 4.406662] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.418617] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:10 UTC (10)
[ 4.419368] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.420471] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.421567] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.421589] *******************Try sd *******************
[ 4.422674] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.423771] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.424867] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.425964] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.425984] *******************Try mmc*******************
[ 4.425994] [mmc]: sdc2 set ios: clk 300000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.427181] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 1, RTO !!
[ 4.427205] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<7>[ 4.427300] [mmc]: sdc2 power_supply is null
[ 4.429864] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.431400] [mmc]: sdc2 power_supply is null
[ 4.450033] [mmc]: sdc2 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.471651] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.473286] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.473309] [mmc]: sdc2 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.476174] [mmc]: sdc2 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.478916] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 8, RTO !!
[ 4.478936] *******************Try sdio*******************
[ 4.480556] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.482196] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.483831] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.485466] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.485486] *******************Try sd *******************
[ 4.487106] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.488741] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.490376] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.492011] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.492031] *******************Try mmc*******************
[ 4.492039] [mmc]: sdc2 set ios: clk 200000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.493782] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 1, RTO !!
[ 4.493804] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.493894] [mmc]: sdc2 power_supply is null
[ 4.496456] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.497977] [mmc]: sdc2 power_supply is null
[ 4.510032] [mmc]: sdc2 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.532190] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.534363] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.534386] [mmc]: sdc2 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.537515] [mmc]: sdc2 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.540817] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 8, RTO !!
[ 4.540837] *******************Try sdio*******************
[ 4.542997] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.545170] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.547343] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.549517] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.549537] *******************Try sd *******************
[ 4.551697] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.553870] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.556043] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.558217] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.558236] *******************Try mmc*******************
[ 4.558244] [mmc]: sdc2 set ios: clk 150000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.560551] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 1, RTO !!
[ 4.560574] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.560663] [mmc]: sdc2 power_supply is null
[ 4.569724] ths_fetch_sysconfig_para: type err device_used = 1.
[ 4.712165] CPU Budget:Register notifier
[ 4.712174] CPU Budget:register Success
[ 4.712180] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[ 4.714530] [rf_pm]: select module num is 7
[ 4.714539] [rf_pm]: module power0 name vcc-wifi-33
[ 4.714545] [rf_pm]: failed to fetch module_power1
[ 4.714551] [rf_pm]: mod has no chip_en gpio
[ 4.714556] [rf_pm]: failed to fetch lpo_use_apclk
[ 4.714560] [rf_pm]: regulator on.
[ 4.714794] [wifi_pm]: wifi gpio init is OK !!
[ 4.714848] ALSA device list:
[ 4.714852] #0: audiocodec
[ 4.714857] #1: sndhdmi
[ 4.714908] Warning: unable to open an initial console.
[ 4.718976] Freeing init memory: 6156K
[ 5.020044] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=5
[ 5.710042] CPU Budget: Temperature: 71 Limit state:1 item[1200000,3,-1,0 0]
[ 5.721080] CPU Budget:Try to down cpu 3, cluster0 online 4, limit 3
[ 5.732206] CPU3: shutdown
[ 5.738372] [hotplug]: cpu(0) try to kill cpu(3)
[ 5.746691] [hotplug]: cpu3 is killed! .
[ 5.754804] [ddrfreq] temperature=71 C, ddr freq up
[ 5.763249] CPU Budget:update CPU 0 cpufreq max to 1200000 min to 480000
[ 6.280126] CPU Budget: Temperature: 68 Limit state:0 item[1200000,4,-1,0 0]
[ 6.297576] [ddrfreq] temperature=68 C, ddr freq up
[ 6.312713] CPU Budget:update CPU 0 cpufreq max to 1200000 min to 480000
[ 13.097924] systemd-udevd[117]: bind failed: No such file or directory
[ 13.115343] systemd-udevd[117]: error binding udev control socket
[ 13.459595] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 13.615534] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
[ 13.615543]
[ 13.635226] [<c0016a8c>] (unwind_backtrace+0x0/0xec) from [<c06c6d38>] (dump_stack+0x20/0x24)
[ 13.649745] [<c06c6d38>] (dump_stack+0x20/0x24) from [<c06c701c>] (panic+0x94/0x1f0)
[ 13.663546] [<c06c701c>] (panic+0x94/0x1f0) from [<c002be84>] (do_exit+0x3ac/0x7ec)
[ 13.676793] [<c002be84>] (do_exit+0x3ac/0x7ec) from [<c002c5b4>] (do_group_exit+0x98/0xc4)
[ 13.690727] [<c002c5b4>] (do_group_exit+0x98/0xc4) from [<c002c600>] (__wake_up_parent+0x0/0x30)
[ 13.705381] [<c002c600>] (__wake_up_parent+0x0/0x30) from [<c000e100>] (ret_fast_syscall+0x0/0x30)
[ 13.720375] CPU1: stopping
[ 13.728415] [<c0016a8c>] (unwind_backtrace+0x0/0xec) from [<c06c6d38>] (dump_stack+0x20/0x24)
[ 13.730361] [<c06c6d38>] (dump_stack+0x20/0x24) from [<c00145d8>] (handle_IPI+0x174/0x2fc)
[ 13.730361] [<c00145d8>] (handle_IPI+0x174/0x2fc) from [<c0008564>] (gic_handle_irq+0x7c/0x84)
[ 13.730361] [<c0008564>] (gic_handle_irq+0x7c/0x84) from [<c000dcc0>] (__irq_svc+0x40/0x70)
[ 13.730361] Exception stack(0xef0b9e28 to 0xef0b9e70)
[ 13.730361] 9e20: c1a02438 600f0013 00075300 00000000 c1a023d0 ee7dd4c0
[ 13.730361] 9e40: c1a02438 600f0013 ffff9031 c0f8a3d0 00075300 ef0b9e7c ef0b9e80 ef0b9e70
[ 13.730361] 9e60: c04da668 c06d21a0 600f0013 ffffffff
[ 13.730361] [<c000dcc0>] (__irq_svc+0x40/0x70) from [<c06d21a0>] (_raw_spin_unlock_irqrestore+0x2c/0x58)
[ 13.730361] [<c06d21a0>] (_raw_spin_unlock_irqrestore+0x2c/0x58) from [<c04da668>] (cpufreq_interactive_timer_resched+0xc0/0xc8)
[ 13.730361] [<c04da668>] (cpufreq_interactive_timer_resched+0xc0/0xc8) from [<c04dac38>] (cpufreq_interactive_timer+0x5c8/0x5f0)
[ 13.730361] [<c04dac38>] (cpufreq_interactive_timer+0x5c8/0x5f0) from [<c04dd4c0>] (cpufreq_interactive_idle_notifier+0x120/0x13c)
[ 13.730361] [<c04dd4c0>] (cpufreq_interactive_idle_notifier+0x120/0x13c) from [<c004e48c>] (notifier_call_chain+0x48/0x78)
[ 13.730361] [<c004e48c>] (notifier_call_chain+0x48/0x78) from [<c004e744>] (__atomic_notifier_call_chain+0x48/0x5c)
[ 13.730361] [<c004e744>] (__atomic_notifier_call_chain+0x48/0x5c) from [<c004e780>] (atomic_notifier_call_chain+0x28/0x30)
[ 13.730361] [<c004e780>] (atomic_notifier_call_chain+0x28/0x30) from [<c0029c68>] (idle_notifier_call_chain+0x24/0x2c)
[ 13.730361] [<c0029c68>] (idle_notifier_call_chain+0x24/0x2c) from [<c000f888>] (cpu_idle+0xdc/0xf4)
[ 13.730361] [<c000f888>] (cpu_idle+0xdc/0xf4) from [<c06c3ba8>] (secondary_start_kernel+0x108/0x12c)
[ 13.730361] [<c06c3ba8>] (secondary_start_kernel+0x108/0x12c) from [<406c3174>] (0x406c3174)
[ 13.730370] CPU0: stopping
[ 13.730370] [<c0016a8c>] (unwind_backtrace+0x0/0xec) from [<c06c6d38>] (dump_stack+0x20/0x24)
[ 13.730370] [<c06c6d38>] (dump_stack+0x20/0x24) from [<c00145d8>] (handle_IPI+0x174/0x2fc)
[ 13.730370] [<c00145d8>] (handle_IPI+0x174/0x2fc) from [<c0008564>] (gic_handle_irq+0x7c/0x84)
[ 13.730370] [<c0008564>] (gic_handle_irq+0x7c/0x84) from [<c000dcc0>] (__irq_svc+0x40/0x70)
[ 13.730370] Exception stack(0xc0f8df18 to 0xc0f8df60)
[ 13.730370] df00: c19f8b38 00000000
[ 13.730370] df20: 00000007 00000000 c0f8c000 c1007fc8 c06d52a4 c0fb7250 c19f5140 410fc075
[ 13.730370] df40: 00000000 c0f8df6c c0f8df70 c0f8df60 c000f420 c000f424 60050013 ffffffff
[ 13.730370] [<c000dcc0>] (__irq_svc+0x40/0x70) from [<c000f424>] (default_idle+0x34/0x3c)
[ 13.730370] [<c000f424>] (default_idle+0x34/0x3c) from [<c000f84c>] (cpu_idle+0xa0/0xf4)
[ 13.730370] [<c000f84c>] (cpu_idle+0xa0/0xf4) from [<c06be6c4>] (rest_init+0x9c/0xb8)
[ 13.730370] [<c06be6c4>] (rest_init+0x9c/0xb8) from [<c0987850>] (start_kernel+0x2dc/0x334)
[ 14.221328] [hotplug]: cpu(2) try to kill cpu(0)
[ 15.233073] [hotplug]: try to kill cpu:0 failed!
[ 15.244737] [hotplug]: cpu(2) try to kill cpu(1)
[ 16.256362] [hotplug]: try to kill cpu:1 failed!
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment