-
-
Save alexdelprete/a8d6ad98ae2c934f12606becd4b01b61 to your computer and use it in GitHub Desktop.
type: custom:stack-in-card | |
cards: | |
- type: custom:mushroom-template-card | |
layout: horizontal | |
primary: > | |
{% set lock_name = state_attr('lock.portoncino','friendly_name') %} {% set | |
trigger = states('sensor.portoncino_trigger') %} {% if | |
is_state('lock.portoncino','unlocked') and | |
is_state('binary_sensor.portoncino_door_sensor','off') %} | |
{{ lock_name }}: closed & unlocked by {{ trigger }} | |
{% elif is_state('lock.portoncino','locked') and | |
is_state('binary_sensor.portoncino_door_sensor','off') %} | |
{{ lock_name }}: closed & locked by {{ trigger }} | |
{% elif is_state('lock.portoncino','unlocked') and | |
is_state('binary_sensor.portoncino_door_sensor','on') %} | |
{{ lock_name }}: open & unlocked by {{ trigger }} | |
{% else %} | |
{{ lock_name }}: state unknown! | |
{% endif %} | |
secondary: > | |
{% set battery_level = states('sensor.portoncino_battery_level') | int | | |
round(0) %} {% set bt_rssi_level = | |
states('sensor.portoncino_bluetooth_signal_strength') | int | round(0) %} | |
{% set wifi_rssi_level = states('sensor.portoncino_wifi_signal_strength') | |
| int | round(0) %} {% set uptime = states('sensor.portoncino_uptime') | | |
int %} Battery: {{ battery_level ~ '%' }} | BT: {{ bt_rssi_level ~ 'dBm' | |
}} | WiFi: {{ wifi_rssi_level ~ 'dBm' }} | Uptime: {{ uptime ~ 'm' if | |
(uptime|int) < 60 else ((uptime|int)/60)|round(1) ~ 'h' }} | |
icon: > | |
{% if is_state('lock.portoncino','unlocked') and | |
is_state('binary_sensor.portoncino_door_sensor','off') %} | |
mdi:door-closed | |
{% elif is_state('lock.portoncino','locked') and | |
is_state('binary_sensor.portoncino_door_sensor','off') %} | |
mdi:door-closed-lock | |
{% elif is_state('lock.portoncino','unlocked') and | |
is_state('binary_sensor.portoncino_door_sensor','on') %} | |
mdi:door-open | |
{% endif%} | |
icon_color: > | |
{% if is_state('lock.portoncino','locked') and | |
is_state('binary_sensor.portoncino_door_sensor','off') %} | |
green | |
{% elif is_state('lock.portoncino','unlocked') and | |
is_state('binary_sensor.portoncino_door_sensor','off') %} | |
yellow | |
{% elif is_state('lock.portoncino','unlocked') and | |
is_state('binary_sensor.portoncino_door_sensor','on') %} %} | |
red | |
{% endif%} | |
badge_icon: > | |
{% set battery_level = states('sensor.portoncino_battery_level') | int | | |
round(0) %} {% if battery_level < 80 %} | |
mdi:battery-{{ battery_level }} | |
{% elif battery_level < 60 %} | |
mdi:battery-alert-variant-outline | |
{% else %} {% endif %} | |
badge_color: > | |
{% set battery_level = states('sensor.portoncino_battery_level') | int | | |
round(0) %} {% if battery_level < 80 %} | |
orange | |
{% elif battery_level < 60 %} | |
red | |
{% else %} | |
green | |
{% endif %} | |
tap_action: | |
action: none | |
card_mod: | |
style: | | |
ha-card { | |
background: none; | |
box-shadow: none; | |
} | |
- type: custom:mushroom-lock-card | |
entity: lock.portoncino | |
name: Laundry Room Door | |
primary_info: none | |
secondary_info: none | |
icon_type: none | |
layout: vertical | |
card_mod: | |
style: | | |
ha-card { | |
background: none; | |
box-shadow: none; | |
} |
My pleasure brother. :)
Hi brother, lately i'm having an issue with this card, from time to time it says state unknown, are you getting the same error?
Just taking this last screenshot I realized that although the entity for the binary sensor's door still reports data, it isn't showing inside the mqtt device for the nuki hub, I don't know if this might be the problem.
My friend...I don't see your door sensor in the device page. Do you have one?
The template I gave you is based on the status of LOCK + DOOR SENSOR. If you don't have the Door Sensor, it should've never worked. :)
The overall status presented in the template is determined by this code: if lock is X AND door is Y then output that message.
{% set lock_name = state_attr('lock.portoncino','friendly_name') %} {% set
trigger = states('sensor.portoncino_trigger') %} {% if
is_state('lock.portoncino','unlocked') and
is_state('binary_sensor.portoncino_door_sensor','off') %}
{{ lock_name }}: closed & unlocked by {{ trigger }}
{% elif is_state('lock.portoncino','locked') and
is_state('binary_sensor.portoncino_door_sensor','off') %}
{{ lock_name }}: closed & locked by {{ trigger }}
{% elif is_state('lock.portoncino','unlocked') and
is_state('binary_sensor.portoncino_door_sensor','on') %}
{{ lock_name }}: open & unlocked by {{ trigger }}
{% else %}
{{ lock_name }}: state unknown!
{% endif %}
I suspect you're having issues with the door sensor, sometimes it needs to be reconfigured again via the Nuki Mobile app.
I understand the lines for the status as they are pretty straightforward, and as I was telling you I after taking the last screenshot I realized that the door sensor wasn't showing up in the mqtt nuki device, I don't know what update broke it. But the binary sensor is still reporting data and with the same entity ID
{% if is_state('lock.nuki','unlocked') and
is_state('binary_sensor.puerta_de_casa_door_sensor','off') %}
mdi:door-closed
{% elif is_state('lock.nuki','locked') and
is_state('binary_sensor.puerta_de_casa_door_sensor','off') %}
mdi:door-closed-lock
{% elif is_state('lock.nuki','unlocked') and
is_state('binary_sensor.puerta_de_casa_door_sensor','on') %}
mdi:door-open
{% endif%}
It was saying mqtt although it wasn't being shown inside the Nuki hub device I don't know why.
But never mind. 8.21 update fixed it and it's showing inside the Nuki hub device again now. I haven't tested it much, but it's working well now so, I won't disturb you anymore 😅😅😅
Ps: Again, I appreciate your willingness to help and giving me support for this issue, it's nice to find kind-hearted people on the internet that helps with kind words even with the dumbest things. I currently live in Spain in a non-tourist city at all but will most likely move to London in the near future as I have family there if you ever there and want a beer or cyder just let me know and it will be on me for sure, my Mediterranean brother!! Thank you very much
Don't worry my friend, it's nothing special. If you need anything, you know how to contact me. I'm also on Discord (alexdelprete#5566) and Telegram (@alexdelprete). :)
Thank you very much, brother
I appreciate your willingness to help me!
Now I only need for the Mushroom cards to give the option to have a confirmation message for unlatch