Created
January 5, 2021 15:00
-
-
Save alexfoias/48aec3fa49c10cf1f79d37c39ae45b54 to your computer and use it in GitHub Desktop.
SMART diagnostic
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-76-generic] (local build) | |
| Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Barracuda 7200.14 (AF) | |
| Device Model: ST3000DM001-1CH166 | |
| Serial Number: Z1F5G5F4 | |
| LU WWN Device Id: 5 000c50 0790a929e | |
| Firmware Version: CC43 | |
| User Capacity: 3,000,592,982,016 bytes [3.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 7200 rpm | |
| Form Factor: 3.5 inches | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) | |
| Local Time is: Tue Jan 5 09:53:39 2021 EST | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| Read SMART Data failed: scsi error badly formed scsi parameters | |
| === START OF READ SMART DATA SECTION === | |
| SMART Status command failed: scsi error badly formed scsi parameters | |
| SMART overall-health self-assessment test result: UNKNOWN! | |
| SMART Status, Attributes and Thresholds cannot be read. | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 70 (device log contains only the most recent five errors) | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 70 occurred at disk power-on lifetime: 20749 hours (864 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 ff ff ff 4f 00 16d+15:51:25.349 READ DMA EXT | |
| 25 00 01 ff ff ff 4f 00 16d+15:51:25.340 READ DMA EXT | |
| 35 00 01 ff ff ff 4f 00 16d+15:51:25.340 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:25.340 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:25.339 WRITE DMA EXT | |
| Error 69 occurred at disk power-on lifetime: 20749 hours (864 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 ff ff ff 4f 00 16d+15:51:24.316 READ DMA EXT | |
| 25 00 01 ff ff ff 4f 00 16d+15:51:24.307 READ DMA EXT | |
| 35 00 01 ff ff ff 4f 00 16d+15:51:24.307 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:24.306 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:24.306 WRITE DMA EXT | |
| Error 68 occurred at disk power-on lifetime: 20749 hours (864 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 ff ff ff 4f 00 16d+15:51:20.465 READ DMA EXT | |
| 25 00 01 ff ff ff 4f 00 16d+15:51:20.456 READ DMA EXT | |
| 35 00 01 ff ff ff 4f 00 16d+15:51:20.456 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:20.456 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:20.455 WRITE DMA EXT | |
| Error 67 occurred at disk power-on lifetime: 20749 hours (864 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 ff ff ff 4f 00 16d+15:51:19.248 READ DMA EXT | |
| 25 00 01 ff ff ff 4f 00 16d+15:51:19.239 READ DMA EXT | |
| 35 00 01 ff ff ff 4f 00 16d+15:51:19.239 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:19.239 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:19.238 WRITE DMA EXT | |
| Error 66 occurred at disk power-on lifetime: 20749 hours (864 days + 13 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 25 00 a8 ff ff ff 4f 00 16d+15:51:17.999 READ DMA EXT | |
| 25 00 01 ff ff ff 4f 00 16d+15:51:17.990 READ DMA EXT | |
| 35 00 01 ff ff ff 4f 00 16d+15:51:17.990 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:17.990 WRITE DMA EXT | |
| 35 00 10 ff ff ff 4f 00 16d+15:51:17.990 WRITE DMA EXT | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| Selective Self-tests/Logging not supported | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment