Created
July 13, 2015 03:42
-
-
Save alfonsojon/eb412ab46c9606683833 to your computer and use it in GitHub Desktop.
Smartctl output for /dev/sda on server
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build) | |
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Seagate Barracuda 7200.12 | |
Device Model: ST31000528AS | |
Serial Number: 9VPAGC6Y | |
LU WWN Device Id: 5 000c50 02d30b120 | |
Firmware Version: HP35 | |
User Capacity: 1,000,204,886,016 bytes [1.00 TB] | |
Sector Size: 512 bytes logical/physical | |
Rotation Rate: 7200 rpm | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
SATA Version is: SATA 2.6, 3.0 Gb/s | |
Local Time is: Sun Jul 12 22:33:55 2015 CDT | |
==> WARNING: A firmware update for this drive may be available, | |
see the following Seagate web pages: | |
http://knowledge.seagate.com/articles/en_US/FAQ/207931en | |
http://knowledge.seagate.com/articles/en_US/FAQ/213891en | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x82) Offline data collection activity | |
was completed without error. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 609) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 176) minutes. | |
SCT capabilities: (0x103f) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 10 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x002f 118 099 006 Pre-fail Always - 189811059 | |
3 Spin_Up_Time 0x0023 096 093 000 Pre-fail Always - 0 | |
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1381 | |
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 32 | |
7 Seek_Error_Rate 0x002f 087 060 030 Pre-fail Always - 651700226 | |
9 Power_On_Hours 0x0032 056 056 000 Old_age Always - 38706 | |
10 Spin_Retry_Count 0x0033 100 100 097 Pre-fail Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 684 | |
180 Unknown_HDD_Attribute 0x002b 100 100 000 Pre-fail Always - 34672 | |
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 | |
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 12885098611 | |
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
190 Airflow_Temperature_Cel 0x0022 056 048 045 Old_age Always - 44 (Min/Max 44/48) | |
194 Temperature_Celsius 0x0022 044 052 000 Old_age Always - 44 (0 19 0 0 0) | |
195 Hardware_ECC_Recovered 0x003a 030 013 000 Old_age Always - 189811059 | |
196 Reallocated_Event_Count 0x0032 100 100 036 Old_age Always - 32 | |
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
SMART Error Log Version: 1 | |
ATA Error Count: 1 | |
CR = Command Register [HEX] | |
FR = Features Register [HEX] | |
SC = Sector Count Register [HEX] | |
SN = Sector Number Register [HEX] | |
CL = Cylinder Low Register [HEX] | |
CH = Cylinder High Register [HEX] | |
DH = Device/Head Register [HEX] | |
DC = Device Command Register [HEX] | |
ER = Error register [HEX] | |
ST = Status register [HEX] | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Error 1 occurred at disk power-on lifetime: 4251 hours (177 days + 3 hours) | |
When the command that caused the error occurred, the device was in an unknown state. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
04 51 00 00 00 00 00 Error: ABRT | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
00 00 00 00 00 00 00 04 00:01:23.346 NOP [Abort queued commands] | |
b0 d4 01 82 4f c2 a0 00 00:01:15.422 SMART EXECUTE OFF-LINE IMMEDIATE | |
b0 d0 01 00 4f c2 a0 00 00:01:15.110 SMART READ DATA | |
b0 d0 01 00 4f c2 a0 00 00:01:13.854 SMART READ DATA | |
b0 d0 01 00 4f c2 a0 00 00:01:04.657 SMART READ DATA | |
SMART Self-test log structure revision number 1 | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Extended offline Completed without error 00% 38704 - | |
# 2 Short offline Completed without error 00% 8294 - | |
# 3 Short offline Completed without error 00% 5977 - | |
# 4 Short offline Completed without error 00% 5975 - | |
# 5 Extended offline Aborted by host 90% 5974 - | |
# 6 Short offline Aborted by host 90% 5974 - | |
# 7 Short captive Completed without error 00% 4251 - | |
# 8 Extended captive Interrupted (host reset) 90% 4251 - | |
# 9 Short offline Completed without error 00% 2868 - | |
#10 Short offline Completed without error 00% 1256 - | |
#11 Short offline Aborted by host 50% 818 - | |
#12 Extended offline Aborted by host 90% 1 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment