app.toml

# This is a TOML config file.
# For more information, see https://github.com/toml-lang/toml

###############################################################################
###                           Base Configuration                            ###
###############################################################################

# The minimum gas prices a validator is willing to accept for processing a
# transaction. A transaction's fees must meet the minimum of any denomination
# specified in this config (e.g. 0.25token1;0.0001token2).
minimum-gas-prices = "0stake"

# default: the last 100 states are kept in addition to every 500th state; pruning at 10 block intervals
# nothing: all historic states will be saved, nothing will be deleted (i.e. archiving node)
# everything: all saved states will be deleted, storing only the current and previous state; pruning at 10 block intervals
# custom: allow pruning options to be manually specified through 'pruning-keep-recent', 'pruning-keep-every', and 'pruning-interval'
pruning = "default"

# These are applied if and only if the pruning strategy is custom.
pruning-keep-recent = "0"
pruning-keep-every = "0"
pruning-interval = "0"

# HaltHeight contains a non-zero block height at which a node will gracefully
# halt and shutdown that can be used to assist upgrades and testing.
#
# Note: Commitment of state will be attempted on the corresponding block.
halt-height = 0

# HaltTime contains a non-zero minimum block time (in Unix seconds) at which
# a node will gracefully halt and shutdown that can be used to assist upgrades
# and testing.
#
# Note: Commitment of state will be attempted on the corresponding block.
halt-time = 0

# MinRetainBlocks defines the minimum block height offset from the current
# block being committed, such that all blocks past this offset are pruned
# from Tendermint. It is used as part of the process of determining the
# ResponseCommit.RetainHeight value during ABCI Commit. A value of 0 indicates
# that no blocks should be pruned.
#
# This configuration value is only responsible for pruning Tendermint blocks.
# It has no bearing on application state pruning which is determined by the
# "pruning-*" configurations.
#
# Note: Tendermint block pruning is dependant on this parameter in conunction
# with the unbonding (safety threshold) period, state pruning and state sync
# snapshot parameters to determine the correct minimum value of
# ResponseCommit.RetainHeight.
min-retain-blocks = 0

# InterBlockCache enables inter-block caching.
inter-block-cache = true

# IndexEvents defines the set of events in the form {eventType}.{attributeKey},
# which informs Tendermint what to index. If empty, all events will be indexed.
#
# Example:
# ["message.sender", "message.recipient"]
index-events = []

# IavlCacheSize set the size of the iavl tree cache. 
# Default cache size is 50mb.
iavl-cache-size = 781250

# IAVLDisableFastNode enables or disables the fast node feature of IAVL. 
# Default is true.
iavl-disable-fastnode = true

###############################################################################
###                         Telemetry Configuration                         ###
###############################################################################

[telemetry]

# Prefixed with keys to separate services.
service-name = ""

# Enabled enables the application telemetry functionality. When enabled,
# an in-memory sink is also enabled by default. Operators may also enabled
# other sinks such as Prometheus.
enabled = true

# Enable prefixing gauge values with hostname.
enable-hostname = false

# Enable adding hostname to labels.
enable-hostname-label = false

# Enable adding service to labels.
enable-service-label = false

# PrometheusRetentionTime, when positive, enables a Prometheus metrics sink.
prometheus-retention-time = 60

# GlobalLabels defines a global set of name/value label tuples applied to all
# metrics emitted using the wrapper functions defined in telemetry package.
#
# Example:
# [["chain_id", "cosmoshub-1"]]
global-labels = [
]

###############################################################################
###                           API Configuration                             ###
###############################################################################

[api]

# Enable defines if the API server should be enabled.
enable = true

# Swagger defines if swagger documentation should automatically be registered.
swagger = true

# Address defines the API server to listen on.
address = "tcp://0.0.0.0:2317"

# MaxOpenConnections defines the number of maximum open connections.
max-open-connections = 1000

# RPCReadTimeout defines the Tendermint RPC read timeout (in seconds).
rpc-read-timeout = 10

# RPCWriteTimeout defines the Tendermint RPC write timeout (in seconds).
rpc-write-timeout = 0

# RPCMaxBodyBytes defines the Tendermint maximum response body (in bytes).
rpc-max-body-bytes = 1000000

# EnableUnsafeCORS defines if CORS should be enabled (unsafe - use it at your own risk).
enabled-unsafe-cors = false

###############################################################################
###                           Rosetta Configuration                         ###
###############################################################################

[rosetta]

# Enable defines if the Rosetta API server should be enabled.
enable = false

# Address defines the Rosetta API server to listen on.
address = ":8080"

# Network defines the name of the blockchain that will be returned by Rosetta.
blockchain = "app"

# Network defines the name of the network that will be returned by Rosetta.
network = "network"

# Retries defines the number of retries when connecting to the node before failing.
retries = 3

# Offline defines if Rosetta server should run in offline mode.
offline = false

###############################################################################
###                           gRPC Configuration                            ###
###############################################################################

[grpc]

# Enable defines if the gRPC server should be enabled.
enable = true

# Address defines the gRPC server address to bind to.
address = "0.0.0.0:8090"

###############################################################################
###                        gRPC Web Configuration                           ###
###############################################################################

[grpc-web]

# GRPCWebEnable defines if the gRPC-web should be enabled.
# NOTE: gRPC must also be enabled, otherwise, this configuration is a no-op.
enable = true

# Address defines the gRPC-web server address to bind to.
address = "0.0.0.0:9091"

# EnableUnsafeCORS defines if CORS should be enabled (unsafe - use it at your own risk).
enable-unsafe-cors = false

###############################################################################
###                        State Sync Configuration                         ###
###############################################################################

# State sync snapshots allow other nodes to rapidly join the network without replaying historical
# blocks, instead downloading and applying a snapshot of the application state at a given height.
[state-sync]

# snapshot-interval specifies the block interval at which local state sync snapshots are
# taken (0 to disable). Must be a multiple of pruning-keep-every.
snapshot-interval = 500

# snapshot-keep-recent specifies the number of recent snapshots to keep and serve (0 to keep all).
snapshot-keep-recent = 3

[wasm]
# This is the maximum sdk gas (wasm and storage) that we allow for any x/wasm "smart" queries
query_gas_limit = 3000000
# This defines the memory size for Wasm modules that we can keep cached to speed-up instantiation
# The value is in MiB not bytes
memory_cache_size = 100

config.toml

[DEFAULT]
# This is a TOML config file.
# For more information, see https://github.com/toml-lang/toml

# NOTE: Any path below can be absolute (e.g. "/var/myawesomeapp/data") or
# relative to the home directory (e.g. "data"). The home directory is
# "$HOME/.tendermint" by default, but could be changed via $TMHOME env variable
# or --home cmd flag.

#######################################################################
###                   Main Base Config Options                      ###
#######################################################################

# TCP or UNIX socket address of the ABCI application,
# or the name of an ABCI application compiled in with the Tendermint binary
proxy_app = "tcp://127.0.0.1:26658"

# A custom human readable name for this node
moniker = "testnet-1-full-node-eris"

# If this node is many blocks behind the tip of the chain, FastSync
# allows them to catchup quickly by downloading blocks in parallel
# and verifying their commits
fast_sync = true

# Database backend: goleveldb | cleveldb | boltdb | rocksdb | badgerdb
# * goleveldb (github.com/syndtr/goleveldb - most popular implementation)
#   - pure go
#   - stable
# * cleveldb (uses levigo wrapper)
#   - fast
#   - requires gcc
#   - use cleveldb build tag (go build -tags cleveldb)
# * boltdb (uses etcd's fork of bolt - github.com/etcd-io/bbolt)
#   - EXPERIMENTAL
#   - may be faster is some use-cases (random reads - indexer)
#   - use boltdb build tag (go build -tags boltdb)
# * rocksdb (uses github.com/tecbot/gorocksdb)
#   - EXPERIMENTAL
#   - requires gcc
#   - use rocksdb build tag (go build -tags rocksdb)
# * badgerdb (uses github.com/dgraph-io/badger)
#   - EXPERIMENTAL
#   - use badgerdb build tag (go build -tags badgerdb)
db_backend = "goleveldb"

# Database directory
db_dir = "data"

# Output level for logging, including package level options
log_level = "info"

# Output format: 'plain' (colored text) or 'json'
log_format = "json"

##### additional base config options #####

# Path to the JSON file containing the initial validator set and other meta data
genesis_file = "config/genesis.json"

# Path to the JSON file containing the private key to use as a validator in the consensus protocol
priv_validator_key_file = "config/priv_validator_key.json"

# Path to the JSON file containing the last sign state of a validator
priv_validator_state_file = "data/priv_validator_state.json"

# TCP or UNIX socket address for Tendermint to listen on for
# connections from an external PrivValidator process
priv_validator_laddr = ""

# Path to the JSON file containing the private key to use for node authentication in the p2p protocol
node_key_file = "config/node_key.json"

# Mechanism to connect to the ABCI application: socket | grpc
abci = "socket"

# If true, query the ABCI app on connecting to a new peer
# so the app can decide if we should keep the connection or not
filter_peers = false


#######################################################################
###                 Advanced Configuration Options                  ###
#######################################################################

#######################################################
###       RPC Server Configuration Options          ###
#######################################################
[rpc]

# TCP or UNIX socket address for the RPC server to listen on
laddr = "tcp://0.0.0.0:36657"

# A list of origins a cross-domain request can be executed from
# Default value '[]' disables cors support
# Use '["*"]' to allow any origin
cors_allowed_origins = []

# A list of methods the client is allowed to use with cross-domain requests
cors_allowed_methods = ["HEAD", "GET", "POST", ]

# A list of non simple headers the client is allowed to use with cross-domain requests
cors_allowed_headers = ["Origin", "Accept", "Content-Type", "X-Requested-With", "X-Server-Time", ]

# TCP or UNIX socket address for the gRPC server to listen on
# NOTE: This server only supports /broadcast_tx_commit
grpc_laddr = ""

# Maximum number of simultaneous connections.
# Does not include RPC (HTTP&WebSocket) connections. See max_open_connections
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
# Should be < {ulimit -Sn} - {MaxNumInboundPeers} - {MaxNumOutboundPeers} - {N of wal, db and other open files}
# 1024 - 40 - 10 - 50 = 924 = ~900
grpc_max_open_connections = 900

# Activate unsafe RPC commands like /dial_seeds and /unsafe_flush_mempool
unsafe = false

# Maximum number of simultaneous connections (including WebSocket).
# Does not include gRPC connections. See grpc_max_open_connections
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
# Should be < {ulimit -Sn} - {MaxNumInboundPeers} - {MaxNumOutboundPeers} - {N of wal, db and other open files}
# 1024 - 40 - 10 - 50 = 924 = ~900
max_open_connections = 900

# Maximum number of unique clientIDs that can /subscribe
# If you're using /broadcast_tx_commit, set to the estimated maximum number
# of broadcast_tx_commit calls per block.
max_subscription_clients = 100

# Maximum number of unique queries a given client can /subscribe to
# If you're using GRPC (or Local RPC client) and /broadcast_tx_commit, set to
# the estimated # maximum number of broadcast_tx_commit calls per block.
max_subscriptions_per_client = 5

# Experimental parameter to specify the maximum number of events a node will
# buffer, per subscription, before returning an error and closing the
# subscription. Must be set to at least 100, but higher values will accommodate
# higher event throughput rates (and will use more memory).
experimental_subscription_buffer_size = 200

# Experimental parameter to specify the maximum number of RPC responses that
# can be buffered per WebSocket client. If clients cannot read from the
# WebSocket endpoint fast enough, they will be disconnected, so increasing this
# parameter may reduce the chances of them being disconnected (but will cause
# the node to use more memory).
#
# Must be at least the same as "experimental_subscription_buffer_size",
# otherwise connections could be dropped unnecessarily. This value should
# ideally be somewhat higher than "experimental_subscription_buffer_size" to
# accommodate non-subscription-related RPC responses.
experimental_websocket_write_buffer_size = 200

# If a WebSocket client cannot read fast enough, at present we may
# silently drop events instead of generating an error or disconnecting the
# client.
#
# Enabling this experimental parameter will cause the WebSocket connection to
# be closed instead if it cannot read fast enough, allowing for greater
# predictability in subscription behaviour.
experimental_close_on_slow_client = false

# How long to wait for a tx to be committed during /broadcast_tx_commit.
# WARNING: Using a value larger than 10s will result in increasing the
# global HTTP write timeout, which applies to all connections and endpoints.
# See https://github.com/tendermint/tendermint/issues/3435
timeout_broadcast_tx_commit = "10s"

# Maximum size of request body, in bytes
max_body_bytes = 1000000

# Maximum size of request header, in bytes
max_header_bytes = 1048576

# The path to a file containing certificate that is used to create the HTTPS server.
# Might be either absolute path or path related to Tendermint's config directory.
# If the certificate is signed by a certificate authority,
# the certFile should be the concatenation of the server's certificate, any intermediates,
# and the CA's certificate.
# NOTE: both tls_cert_file and tls_key_file must be present for Tendermint to create HTTPS server.
# Otherwise, HTTP server is run.
tls_cert_file = ""

# The path to a file containing matching private key that is used to create the HTTPS server.
# Might be either absolute path or path related to Tendermint's config directory.
# NOTE: both tls-cert-file and tls-key-file must be present for Tendermint to create HTTPS server.
# Otherwise, HTTP server is run.
tls_key_file = ""

# pprof listen address (https://golang.org/pkg/net/http/pprof)
pprof_laddr = "localhost:6060"

#######################################################
###           P2P Configuration Options             ###
#######################################################
[p2p]

# Address to listen for incoming connections
laddr = "tcp://0.0.0.0:26656"

# Address to advertise to peers for them to dial
# If empty, will use the same port as the laddr,
# and will introspect on the listener or use UPnP
# to figure out the address. ip and port are required
# example: 159.89.10.97:26656
external_address = "tcp://34.173.227.148:26656"

# Comma separated list of seed nodes to connect to
seeds = "53f2367d8f8291af8e3b6ca60efded0675ff6314@34.29.15.170:26656,64391878009b8804d90fda13805e45041f492155@35.232.157.206:26656,"

# Comma separated list of nodes to keep persistent connections to
persistent_peers = ""

# UPNP port forwarding
upnp = false

# Path to address book
addr_book_file = "config/addrbook.json"

# Set true for strict address routability rules
# Set false for private or local networks
addr_book_strict = false

# Maximum number of inbound peers
max_num_inbound_peers = 40

# Maximum number of outbound peers to connect to, excluding persistent peers
max_num_outbound_peers = 10

# List of node IDs, to which a connection will be (re)established ignoring any existing limits
unconditional_peer_ids = ""

# Maximum pause when redialing a persistent peer (if zero, exponential backoff is used)
persistent_peers_max_dial_period = "0s"

# Time to wait before flushing messages out on the connection
flush_throttle_timeout = "100ms"

# Maximum size of a message packet payload, in bytes
max_packet_msg_payload_size = 1024

# Rate at which packets can be sent, in bytes/second
send_rate = 5120000

# Rate at which packets can be received, in bytes/second
recv_rate = 5120000

# Set true to enable the peer-exchange reactor
pex = true

# Seed mode, in which node constantly crawls the network and looks for
# peers. If another node asks it for addresses, it responds and disconnects.
#
# Does not work if the peer-exchange reactor is disabled.
seed_mode = false

# Comma separated list of peer IDs to keep private (will not be gossiped to other peers)
private_peer_ids = ""

# Toggle to disable guard against peers connecting from the same ip.
allow_duplicate_ip = false

# Peer connection configuration.
handshake_timeout = "20s"
dial_timeout = "3s"

#######################################################
###          Mempool Configuration Option          ###
#######################################################
[mempool]

# Mempool version to use:
#   1) "v0" - (default) FIFO mempool.
#   2) "v1" - prioritized mempool.
version = "v0"

recheck = true
broadcast = true
wal_dir = ""

# Maximum number of transactions in the mempool
size = 5000

# Limit the total size of all txs in the mempool.
# This only accounts for raw transactions (e.g. given 1MB transactions and
# max_txs_bytes=5MB, mempool will only accept 5 transactions).
max_txs_bytes = 1073741824

# Size of the cache (used to filter transactions we saw earlier) in transactions
cache_size = 10000

# Do not remove invalid transactions from the cache (default: false)
# Set to true if it's not possible for any invalid transaction to become valid
# again in the future.
keep-invalid-txs-in-cache = false

# Maximum size of a single transaction.
# NOTE: the max size of a tx transmitted over the network is {max_tx_bytes}.
max_tx_bytes = 1048576

# Maximum size of a batch of transactions to send to a peer
# Including space needed by encoding (one varint per transaction).
# XXX: Unused due to https://github.com/tendermint/tendermint/issues/5796
max_batch_bytes = 0

# ttl-duration, if non-zero, defines the maximum amount of time a transaction
# can exist for in the mempool.
#
# Note, if ttl-num-blocks is also defined, a transaction will be removed if it
# has existed in the mempool at least ttl-num-blocks number of blocks or if it's
# insertion time into the mempool is beyond ttl-duration.
ttl-duration = "0s"

# ttl-num-blocks, if non-zero, defines the maximum number of blocks a transaction
# can exist for in the mempool.
#
# Note, if ttl-duration is also defined, a transaction will be removed if it
# has existed in the mempool at least ttl-num-blocks number of blocks or if
# it's insertion time into the mempool is beyond ttl-duration.
ttl-num-blocks = 0

#######################################################
###         State Sync Configuration Options        ###
#######################################################
[statesync]
# State sync rapidly bootstraps a new node by discovering, fetching, and restoring a state machine
# snapshot from peers instead of fetching and replaying historical blocks. Requires some peers in
# the network to take and serve state machine snapshots. State sync is not attempted if the node
# has any local state (LastBlockHeight > 0). The node will have a truncated block history,
# starting from the height of the snapshot.
enable = false

# RPC servers (comma-separated) for light client verification of the synced state machine and
# retrieval of state data for node bootstrapping. Also needs a trusted height and corresponding
# header hash obtained from a trusted source, and a period during which validators can be trusted.
#
# For Cosmos SDK-based chains, trust_period should usually be about 2/3 of the unbonding time (~2
# weeks) during which they can be financially punished (slashed) for misbehavior.
rpc_servers = ""
trust_height = 0
trust_hash = ""
trust_period = "168h0m0s"

# Time to spend discovering snapshots before initiating a restore.
discovery_time = "15s"

# Temporary directory for state sync snapshot chunks, defaults to the OS tempdir (typically /tmp).
# Will create a new, randomly named directory within, and remove it when done.
temp_dir = ""

# The timeout duration before re-requesting a chunk, possibly from a different
# peer (default: 1 minute).
chunk_request_timeout = "10s"

# The number of concurrent chunk fetchers to run (default: 1).
chunk_fetchers = "4"

#######################################################
###       Fast Sync Configuration Connections       ###
#######################################################
[fastsync]

# Fast Sync version to use:
#   1) "v0" (default) - the legacy fast sync implementation
#   2) "v1" - refactor of v0 version for better testability
#   2) "v2" - complete redesign of v0, optimized for testability & readability
version = "v0"

#######################################################
###         Consensus Configuration Options         ###
#######################################################
[consensus]

wal_file = "data/cs.wal/wal"

# How long we wait for a proposal block before prevoting nil
timeout_propose = "3s"
# How much timeout_propose increases with each round
timeout_propose_delta = "500ms"
# How long we wait after receiving +2/3 prevotes for “anything” (ie. not a single block or nil)
timeout_prevote = "1s"
# How much the timeout_prevote increases with each round
timeout_prevote_delta = "500ms"
# How long we wait after receiving +2/3 precommits for “anything” (ie. not a single block or nil)
timeout_precommit = "1s"
# How much the timeout_precommit increases with each round
timeout_precommit_delta = "500ms"
# How long we wait after committing a block, before starting on the new
# height (this gives us a chance to receive some more precommits, even
# though we already have +2/3).
timeout_commit = "1s"

# How many blocks to look back to check existence of the node's consensus votes before joining consensus
# When non-zero, the node will panic upon restart
# if the same consensus key was used to sign {double_sign_check_height} last blocks.
# So, validators should stop the state machine, wait for some blocks, and then restart the state machine to avoid panic.
double_sign_check_height = 0

# Make progress as soon as we have all the precommits (as if TimeoutCommit = 0)
skip_timeout_commit = false

# EmptyBlocks mode and possible interval between empty blocks
create_empty_blocks = true
create_empty_blocks_interval = "0s"

# Reactor sleep duration parameters
peer_gossip_sleep_duration = "100ms"
peer_query_maj23_sleep_duration = "2s"

#######################################################
###         Storage Configuration Options           ###
#######################################################
[storage]

# Set to true to discard ABCI responses from the state store, which can save a
# considerable amount of disk space. Set to false to ensure ABCI responses are
# persisted. ABCI responses are required for /block_results RPC queries, and to
# reindex events in the command-line tool.
discard_abci_responses = false

#######################################################
###   Transaction Indexer Configuration Options     ###
#######################################################
[tx_index]

# What indexer to use for transactions
#
# The application will set which txs to index. In some cases a node operator will be able
# to decide which txs to index based on configuration set in the application.
#
# Options:
#   1) "null"
#   2) "kv" (default) - the simplest possible indexer, backed by key-value storage (defaults to levelDB; see DBBackend).
#               - When "kv" is chosen "tx.height" and "tx.hash" will always be indexed.
#   3) "psql" - the indexer services backed by PostgreSQL.
# When "kv" or "psql" is chosen "tx.height" and "tx.hash" will always be indexed.
indexer = "kv"

# The PostgreSQL connection configuration, the connection format:
#   postgresql://<user>:<password>@<host>:<port>/<db>?<opts>
psql-conn = ""

#######################################################
###       Instrumentation Configuration Options     ###
#######################################################
[instrumentation]

# When true, Prometheus metrics are served under /metrics on
# PrometheusListenAddr.
# Check out the documentation for the list of available metrics.
prometheus = true

# Address to listen for Prometheus collector(s) connections
prometheus_listen_addr = ":26660"

# Maximum number of simultaneous connections.
# If you want to accept a larger number than the default, make sure
# you increase your OS limits.
# 0 - unlimited.
max_open_connections = 3

# Instrumentation namespace
namespace = "tendermint"