-
-
Save amarjandu/3ba8b8923ae124e1fa93ae5d244cfb60 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
================================================== | |
Starting the Dafang Hacks Custom Application Layer | |
================================================== | |
Loaded common functions | |
Created etc directory on sdcard | |
Bind mounted /system/sdcard/bin/busybox to /bin/busybox | |
Bind mounted /system/sdcard/root to /root | |
Bind mounted /system/sdcard/etc to /etc | |
wpa_supplicant: wpa_supplicant v2.5 | |
random: Trying to read entropy from /dev/random | |
Successfully initialized wpa_supplicant | |
Initializing interface 'wlan0' conf '/system/sdcard/config/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' | |
Configuration file '/system/sdcard/config/wpa_supplicant.conf' -> '/system/sdcard/config/wpa_supplicant.conf' | |
Reading configuration file '/system/sdcard/config/wpa_supplicant.conf' | |
ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=0' | |
update_config=1 | |
country='US' | |
Priority group 0 | |
id=0 ssid='Twinkle' | |
nl80211: Could not add multicast membership for vendor events: -2 (No such file or directory) | |
rfkill: Cannot open RFKILL control device | |
nl80211: RFKILL status not available | |
nl80211: Supported cipher 00-0f-ac:1 | |
nl80211: Supported cipher 00-0f-ac:5 | |
nl80211: Supported cipher 00-0f-ac:2 | |
nl80211: Supported cipher 00-0f-ac:4 | |
nl80211: Using driver-based off-channel TX | |
nl80211: Disable use_monitor with device_ap_sme since no monitor mode support detected | |
nl80211: interface wlan0 in phy phy0 | |
nl80211: Set mode ifindex 2 iftype 2 (STATION) | |
nl80211: Subscribe to mgmt frames with non-AP handle 0xba0268 | |
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xba0268 match=06 | |
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xba0268 match=0a07 | |
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xba0268 match=0a11 | |
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xba0268 match=1101 | |
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xba0268 match=1102 | |
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xba0268 match=0505 | |
netlink: Operstate: ifindex=2 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT) | |
nl80211: Could not re-add multicast membership for vendor events: -2 (No such file or directory) | |
nl80211: driver param='(null)' | |
Add interface wlan0 to a new radio phy0 | |
nl80211: Regulatory information - country=00 | |
nl80211: 2402-2472 @ 40 MHz 20 mBm | |
nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) | |
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) | |
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) | |
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) | |
nl80211: 57240-63720 @ 2160 MHz 0 mBm | |
nl80211: Added 802.11b mode based on 802.11g information | |
wlan0: Own MAC address: 78:11:dc:12:c4:40 | |
wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 | |
wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 | |
wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 | |
wpa_driver_nl80211_set_key: ifindex=2 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 | |
wlan0: RSN: flushing PMKID list in the driver | |
nl80211: Flush PMKIDs | |
wlan0: Setting scan request: 0.100000 sec | |
ENGINE: Loading dynamic engine | |
ENGINE: Loading dynamic engine | |
EAPOL: SUPP_PAE entering state DISCONNECTED | |
EAPOL: Supplicant port status: Unauthorized | |
nl80211: Skip set_supp_port(unauthorized) while not associated | |
EAPOL: KEY_RX entering state NO_KEY_RECEIVE | |
EAPOL: SUPP_BE entering state INITIALIZE | |
EAP: EAP entering state DISABLED | |
ctrl_interface_group=0 | |
wlan0: Added interface wlan0 | |
wlan0: State: DISCONNECTED -> DISCONNECTED | |
nl80211: Set wlan0 operstate 0->0 (DORMANT) | |
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT) | |
Daemonize.. | |
udhcpc: deleting routers | |
adding dns 192.168.1.1 | |
Initialized gpios | |
Determined image sensor model as jxf22 | |
dropbear: | |
lighttpd: | |
Startup finished! | |
Contents of dmesg after startup: | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Initializing cgroup subsys cpuacct | |
[ 0.000000] Linux version 3.10.14 (root@ubuntu) (gcc version 4.7.2 (Ingenic r2.3.3 2016.12) ) #21 PREEMPT Thu Oct 19 11:38:16 CST 2017 | |
[ 0.000000] bootconsole [early0] enabled | |
[ 0.000000] CPU0 RESET ERROR PC:F9E6108E | |
[ 0.000000] CPU0 revision is: 00d00101 (Ingenic Xburst) | |
[ 0.000000] FPU revision is: 00b70000 | |
[ 0.000000] cgu_get_rate, parent = 712704000, rate = 0, m = 0, n = 0, reg val = 0x000020ff | |
[ 0.000000] CCLK:712MHz L2CLK:356Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz | |
[ 0.000000] Determined physical RAM map: | |
[ 0.000000] memory: 0051b000 @ 00010000 (usable) | |
[ 0.000000] memory: 00035000 @ 0052b000 (usable after init) | |
[ 0.000000] User-defined physical RAM map: | |
[ 0.000000] memory: 028b9000 @ 00000000 (usable) | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x00000000-0x028b8fff] | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x00000000-0x028b8fff] | |
[ 0.000000] On node 0 totalpages: 10425 | |
[ 0.000000] free_area_init_node: node 0, pgdat 805285f0, node_mem_map 81000000 | |
[ 0.000000] Normal zone: 82 pages used for memmap | |
[ 0.000000] Normal zone: 0 pages reserved | |
[ 0.000000] Normal zone: 10425 pages, LIFO batch:1 | |
[ 0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes. | |
[ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes | |
[ 0.000000] pls check processor_id[0x00d00101],sc_jz not support! | |
[ 0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes. | |
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 | |
[ 0.000000] pcpu-alloc: [0] 0 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 10343 | |
[ 0.000000] Kernel command line: console=ttyS1,115200n8 mem=41700K@0x0 ispmem=8M@0x28B9000 rmem=15644K@0x30B9000 init=/linuxrc rootfstype=squashfs root=/dev/mtdblock2 rw mtdparts=jz_sfc:256k(boot),2048k(kernel),3392k(root),640k(driver),4736k(appfs),2048k(backupk),640k(backupd),2048k(backupa),256k(config),256k(para),-(flag) | |
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) | |
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.000000] Memory: 35192k/41700k available (3951k kernel code, 6508k reserved, 1276k data, 212k init, 0k highmem) | |
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] NR_IRQS:418 | |
[ 0.000000] clockevents_config_and_register success. | |
[ 0.000028] Calibrating delay loop... 709.42 BogoMIPS (lpj=3547136) | |
[ 0.057700] pid_max: default: 32768 minimum: 301 | |
[ 0.062745] Mount-cache hash table entries: 512 | |
[ 0.067959] Initializing cgroup subsys debug | |
[ 0.072224] Initializing cgroup subsys freezer | |
[ 0.079780] regulator-dummy: no parameters | |
[ 0.084057] NET: Registered protocol family 16 | |
[ 0.109162] bio: create slab <bio-0> at 0 | |
[ 0.116035] jz-dma jz-dma: JZ SoC DMA initialized | |
[ 0.121300] SCSI subsystem initialized | |
[ 0.125382] usbcore: registered new interface driver usbfs | |
[ 0.130924] usbcore: registered new interface driver hub | |
[ 0.136428] usbcore: registered new device driver usb | |
[ 0.141734] i2c-gpio i2c-gpio.1: using pins 57 (SDA) and 58 (SCL) | |
[ 0.148024] (null): set:249 hold:250 dev=100000000 h=500 l=500 | |
[ 0.154155] media: Linux media interface: v0.10 | |
[ 0.158756] Linux video capture interface: v2.00 | |
[ 0.165946] Switching to clocksource jz_clocksource | |
[ 0.171616] jz-dwc2 jz-dwc2: cgu clk gate get error | |
[ 0.176622] cfg80211: Calling CRDA to update world regulatory domain | |
[ 0.183085] jz-dwc2 jz-dwc2: regulator vbus get error | |
[ 0.188144] DWC IN OTG MODE | |
[ 0.341057] sft id =========================off | |
[ 0.345679] dwc2 dwc2: Keep PHY ON | |
[ 0.349052] dwc2 dwc2: Using Buffer DMA mode | |
[ 0.552752] dwc2 dwc2: Core Release: 3.00a | |
[ 0.556868] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller | |
[ 0.563226] dwc2 dwc2: new USB bus registered, assigned bus number 1 | |
[ 0.570767] hub 1-0:1.0: USB hub found | |
[ 0.574584] hub 1-0:1.0: 1 port detected | |
[ 0.578650] dwc2 dwc2: DWC2 Host Initialized | |
[ 0.583224] NET: Registered protocol family 2 | |
[ 0.588283] TCP established hash table entries: 512 (order: 0, 4096 bytes) | |
[ 0.595270] TCP bind hash table entries: 512 (order: -1, 2048 bytes) | |
[ 0.601672] TCP: Hash tables configured (established 512 bind 512) | |
[ 0.607980] TCP: reno registered | |
[ 0.611214] UDP hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.617116] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
[ 0.623815] NET: Registered protocol family 1 | |
[ 0.628546] RPC: Registered named UNIX socket transport module. | |
[ 0.634570] RPC: Registered udp transport module. | |
[ 0.639264] RPC: Registered tcp transport module. | |
[ 0.644050] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.651182] freq_udelay_jiffys[0].max_num = 10 | |
[ 0.655612] cpufreq udelay loops_per_jiffy | |
[ 0.660043] dwc2 dwc2: ID PIN CHANGED! | |
[ 0.663901] init DWC as A_HOST | |
[ 0.666947] 12000 59724 59724 | |
[ 0.670185] 24000 119448 119448 | |
[ 0.673764] 60000 298620 298620 | |
[ 0.677134] 120000 597241 597241 | |
[ 0.680665] 200000 995402 995402 | |
[ 0.684320] 300000 1493103 1493103 | |
[ 0.687955] 600000 2986206 2986206 | |
[ 0.691690] 792000 3941793 3941793 | |
[ 0.695371] 1008000 5016827 5016827 | |
[ 0.699167] 1200000 5972413 5972413 | |
[ 0.709612] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.716729] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
[ 0.723428] msgmni has been set to 68 | |
[ 0.728743] io scheduler noop registered | |
[ 0.732817] io scheduler cfq registered (default) | |
[ 0.739601] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1 | |
[ 0.748258] console [ttyS1] enabled, bootconsole disabled | |
[ 0.764441] brd: module loaded | |
[ 0.770101] loop: module loaded | |
[ 0.774435] zram: Created 2 device(s) ... | |
[ 0.778664] logger: created 256K log 'log_main' | |
[ 0.784161] jz SADC driver registeres over! | |
[ 0.789630] jz TCU driver register completed | |
[ 0.794807] the id code = c84018, the flash name is GD25Q127C | |
[ 0.800735] JZ SFC Controller for SFC channel 0 driver register | |
[ 0.806946] 11 cmdlinepart partitions found on MTD device jz_sfc | |
[ 0.813154] Creating 11 MTD partitions on "jz_sfc": | |
[ 0.818183] 0x000000000000-0x000000040000 : "boot" | |
[ 0.823810] 0x000000040000-0x000000240000 : "kernel" | |
[ 0.829547] 0x000000240000-0x000000590000 : "root" | |
[ 0.835188] 0x000000590000-0x000000630000 : "driver" | |
[ 0.841006] 0x000000630000-0x000000ad0000 : "appfs" | |
[ 0.846703] 0x000000ad0000-0x000000cd0000 : "backupk" | |
[ 0.852623] 0x000000cd0000-0x000000d70000 : "backupd" | |
[ 0.858471] 0x000000d70000-0x000000f70000 : "backupa" | |
[ 0.864405] 0x000000f70000-0x000000fb0000 : "config" | |
[ 0.870211] 0x000000fb0000-0x000000ff0000 : "para" | |
[ 0.875902] 0x000000ff0000-0x000001000000 : "flag" | |
[ 0.881544] SPI NOR MTD LOAD OK | |
[ 0.884864] tun: Universal TUN/TAP device driver, 1.6 | |
[ 0.890066] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
[ 0.896633] usbcore: registered new interface driver zd1201 | |
[ 0.902468] usbcore: registered new interface driver r8152 | |
[ 0.908214] usbcore: registered new interface driver usb-storage | |
[ 0.914585] usbcore: registered new interface driver usbserial | |
[ 0.920634] usbcore: registered new interface driver usbserial_generic | |
[ 0.927438] usbserial: USB Serial support registered for generic | |
[ 0.933688] usbcore: registered new interface driver ch341 | |
[ 0.939372] usbserial: USB Serial support registered for ch341-uart | |
[ 0.945884] usbcore: registered new interface driver cp210x | |
[ 0.951683] usbserial: USB Serial support registered for cp210x | |
[ 0.957832] usbcore: registered new interface driver pl2303 | |
[ 0.963631] usbserial: USB Serial support registered for pl2303 | |
[ 1.469637] i8042: i8042 controller selftest timeout | |
[ 1.475366] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing | |
[ 1.490883] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0 | |
[ 1.520888] jzmmc_v1.2 jzmmc_v1.2.0: register success! | |
[ 1.526259] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing | |
[ 1.570996] jzmmc_v1.2 jzmmc_v1.2.1: register success! | |
[ 1.576463] hidraw: raw HID events driver (C) Jiri Kosina | |
[ 1.583450] usbcore: registered new interface driver usbhid | |
[ 1.589192] usbhid: USB HID core driver | |
[ 1.593498] TCP: cubic registered | |
[ 1.596916] NET: Registered protocol family 17 | |
[ 1.602746] input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
[ 1.609884] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) | |
[ 1.623086] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. | |
[ 1.630788] Freeing unused kernel memory: 212K (8052b000 - 80560000) | |
[ 1.773569] dwc2 dwc2: ++OTG Interrupt: A-Device Timeout Change++ | |
[ 2.618477] mmc0: new SD card at address 8dd0 | |
[ 2.626865] mmcblk0: mmc0:8dd0 SU02G 1.89 GiB | |
[ 2.633847] mmcblk0: p1 | |
[ 3.005142] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
[ 4.169818] Unable to find swap-space signature | |
[ 4.751391] RTL871X: module init start | |
[ 4.755264] RTL871X: rtl8189es v4.3.18.3_20185.20161116_pmpinclu_mac_monitor_minMem_EDCA542B_pbyr | |
[ 4.764477] RTL871X: build time: Oct 19 2017 11:54:52 | |
[ 4.769684] wlan power on | |
[ 4.791347] RTL871X: module init ret=0 | |
[ 4.850460] mmc1: new SDIO card at address 0001 | |
[ 4.883527] bFWReady == _FALSE call reset 8051... | |
[ 4.921357] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=78:11:dc:12:c4:40 | |
[ 6.971083] ==> rtl8188e_iol_efuse_patch | |
[ 8.709249] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008 | |
[ 8.764583] RTL871X: start auth | |
[ 9.062907] RTL871X: auth success, start assoc | |
[ 9.071170] RTL871X: assoc success | |
[ 9.075051] RTL871X: recv eapol packet | |
[ 9.102723] RTL871X: send eapol packet | |
[ 9.111965] RTL871X: recv eapol packet | |
[ 9.118769] RTL871X: send eapol packet | |
[ 9.126834] RTL871X: set pairwise key camid:4, addr:8c:3b:ad:f6:e6:2f, kid:0, type:AES | |
[ 9.140013] RTL871X: set group key camid:5, addr:8c:3b:ad:f6:e6:2f, kid:1, type:AES | |
[ 11.814700] request spk en gpio 63 ok! | |
[ 11.814719] jz_codec_register: probe() successful! | |
[ 11.822229] cgu_set_rate, parent = 712704000, rate = 2048000, n = 348, reg val = 0x0000215c | |
[ 11.822251] cgu_enable,cgu_i2s reg val = 0x2000215c | |
[ 12.171359] dma dma0chan24: Channel 24 have been requested.(phy id 7,type 0x06 desc a0fa1000) | |
[ 12.180653] dma dma0chan25: Channel 25 have been requested.(phy id 6,type 0x06 desc a0f78000) | |
[ 13.243150] motor_probe743 | |
[ 13.265710] name : i2c-gpio1 nr : 1 | |
[ 13.269311] name : i2c0 nr : 0 | |
[ 13.335721] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 13.342836] i2c i2c-0: --I2C txabrt: | |
[ 13.346522] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 13.353095] error: sensor_read,172 ret = -5 | |
[ 13.357399] sensor_read: addr=0xa value = 0x0 | |
[ 13.361987] err sensor read addr = 0xa, value = 0x0 | |
[ 13.427005] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 13.434107] i2c i2c-0: --I2C txabrt: | |
[ 13.437794] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 13.444365] error: sensor_read,172 ret = -5 | |
[ 13.448672] sensor_read: addr=0x300a value = 0x0 | |
[ 13.453531] err sensor read addr = 0x300a, value = 0x0 | |
[ 13.519048] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 13.526155] i2c i2c-0: --I2C txabrt: | |
[ 13.529841] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 13.536412] error: sensor_read,172 ret = -5 | |
[ 13.540718] sensor_read: addr=0x300b value = 0x0 | |
[ 13.545574] err sensor read addr = 0x300b, value = 0x0 | |
[ 13.610872] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 13.617959] i2c i2c-0: --I2C txabrt: | |
[ 13.621701] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 13.628260] error: sensor_read,172 ret = -5 | |
[ 13.632587] sensor_read: addr=0xa value = 0x0 | |
[ 13.637161] err sensor read addr = 0xa, value = 0x0 | |
[ 13.702450] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 13.709542] i2c i2c-0: --I2C txabrt: | |
[ 13.713247] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 13.719803] error: sensor_read,172 ret = -5 | |
[ 13.724126] sensor_read: addr=0x580b value = 0x0 | |
[ 13.728969] err sensor read addr = 0x580b, value = 0x0 | |
[ 13.794268] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 13.801371] i2c i2c-0: --I2C txabrt: | |
[ 13.805058] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 13.811628] error: sensor_read,172 ret = -5 | |
[ 13.815934] sensor_read: addr=0x580b value = 0x0 | |
[ 13.820776] err sensor read addr = 0x580b, value = 0x0 | |
[ 13.886228] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 13.893343] i2c i2c-0: --I2C txabrt: | |
[ 13.897030] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 13.903602] error: sensor_read,172 ret = -5 | |
[ 13.907909] sensor_read: addr=0x3107 value = 0x0 | |
[ 13.912768] err sensor read addr = 0x3107, value = 0x0 | |
[ 13.978428] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 13.985540] i2c i2c-0: --I2C txabrt: | |
[ 13.989228] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 13.995801] error: sensor_read,172 ret = -5 | |
[ 14.000109] sensor_read: addr=0x3107 value = 0x0 | |
[ 14.004974] err sensor read addr = 0x3107, value = 0x0 | |
[ 14.070264] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.077365] i2c i2c-0: --I2C txabrt: | |
[ 14.081066] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.087622] error: sensor_read,172 ret = -5 | |
[ 14.092025] sensor_read: addr=0x3000 value = 0x0 | |
[ 14.096980] err sensor read addr = 0x3000, value = 0x0 | |
[ 14.163000] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.170094] i2c i2c-0: --I2C txabrt: | |
[ 14.173799] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.180356] error: sensor_read,172 ret = -5 | |
[ 14.184676] sensor_read: addr=0xa value = 0x0 | |
[ 14.189252] err sensor read addr = 0xa, value = 0x0 | |
[ 14.254283] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.261386] i2c i2c-0: --I2C txabrt: | |
[ 14.265074] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.271644] error: sensor_read,172 ret = -5 | |
[ 14.275951] sensor_read: addr=0xf0 value = 0x0 | |
[ 14.280615] err sensor read addr = 0xf0, value = 0x0 | |
[ 14.345965] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.353071] i2c i2c-0: --I2C txabrt: | |
[ 14.356757] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.363327] error: sensor_read,172 ret = -5 | |
[ 14.367635] sensor_read: addr=0xf0 value = 0x0 | |
[ 14.372313] err sensor read addr = 0xf0, value = 0x0 | |
[ 14.437415] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.444517] i2c i2c-0: --I2C txabrt: | |
[ 14.448202] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.454770] error: sensor_read,172 ret = -5 | |
[ 14.459077] sensor_read: addr=0xf0 value = 0x0 | |
[ 14.463757] err sensor read addr = 0xf0, value = 0x0 | |
[ 14.529059] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.536165] i2c i2c-0: --I2C txabrt: | |
[ 14.539851] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.546421] error: sensor_read,172 ret = -5 | |
[ 14.550728] sensor_read: addr=0xfc value = 0x0 | |
[ 14.555405] err sensor read addr = 0xfc, value = 0x0 | |
[ 14.620512] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.627613] i2c i2c-0: --I2C txabrt: | |
[ 14.631315] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.637871] error: sensor_read,172 ret = -5 | |
[ 14.642191] sensor_read: addr=0x3004 value = 0x0 | |
[ 14.647035] err sensor read addr = 0x3004, value = 0x0 | |
[ 14.712677] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.719767] i2c i2c-0: --I2C txabrt: | |
[ 14.723511] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.730069] error: sensor_read,172 ret = -5 | |
[ 14.734398] sensor_read: addr=0x300a value = 0x0 | |
[ 14.739243] err sensor read addr = 0x300a, value = 0x0 | |
[ 14.804559] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.811663] i2c i2c-0: --I2C txabrt: | |
[ 14.815350] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.821923] error: sensor_read,172 ret = -5 | |
[ 14.826229] sensor_read: addr=0x31f3 value = 0x0 | |
[ 14.831085] err sensor read addr = 0x31f3, value = 0x0 | |
[ 14.896371] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.903472] i2c i2c-0: --I2C txabrt: | |
[ 14.907157] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 14.913805] error: sensor_read,172 ret = -5 | |
[ 14.918209] sensor_read: addr=0x3107 value = 0x0 | |
[ 14.923083] err sensor read addr = 0x3107, value = 0x0 | |
[ 14.988373] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 14.995478] i2c i2c-0: --I2C txabrt: | |
[ 14.999165] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 15.005740] error: sensor_read,172 ret = -5 | |
[ 15.010047] sensor_read: addr=0x4 value = 0x0 | |
[ 15.014640] err sensor read addr = 0x4, value = 0x0 | |
[ 15.079658] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 15.086761] i2c i2c-0: --I2C txabrt: | |
[ 15.090449] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 15.097019] error: sensor_read,172 ret = -5 | |
[ 15.101339] sensor_read: addr=0xa value = 0x0 | |
[ 15.105914] err sensor read addr = 0xa, value = 0x0 | |
[ 15.171112] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 15.178202] i2c i2c-0: --I2C txabrt: | |
[ 15.181904] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 15.188460] error: sensor_read,172 ret = -5 | |
[ 15.192780] sensor_read: addr=0x0 value = 0x0 | |
[ 15.197356] err sensor read addr = 0x0, value = 0x0 | |
[ 15.263793] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt | |
[ 15.270905] i2c i2c-0: --I2C txabrt: | |
[ 15.274594] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK | |
[ 15.281167] error: sensor_read,172 ret = -5 | |
[ 15.285475] sensor_read: addr=0x300a value = 0x0 | |
[ 15.290317] err sensor read addr = 0x300a, value = 0x0 | |
[ 15.356070] sensor_read: addr=0xa value = 0xf | |
[ 15.361061] sensor_read: addr=0xb value = 0x22 | |
[ 15.365732] info: success sensor find : jxf22 | |
[ 15.528799] register all isp device successfully! | |
[ 15.536743] @@@@ tx-isp-probe ok @@@@@ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment