fusb302-rasp-power

[    3.232643] typec_fusb302 4-0022: Looking up vbus-supply from device tree
[    3.233490] typec_fusb302 4-0022: sw reset
[    3.239292] typec_fusb302 4-0022: fusb302 device ID: 0x91
[    3.241330] typec_fusb302 4-0022: Setting usb_comm capable false
[    3.254603] typec_fusb302 4-0022: pd := off
[    3.258591] typec_fusb302 4-0022: vbus is already Off
[    3.267031] typec_fusb302 4-0022: charge is already Off
[    3.267034] typec_fusb302 4-0022: vconn is already Off
[    3.267037] typec_fusb302 4-0022: Setting voltage/current limit 5000 mV 3000 mA
[    3.267043] typec_fusb302 4-0022: polarity 0
[    3.267046] typec_fusb302 4-0022: Requesting mux state 0, usb-role 0, orientation 0
[    3.268113] typec_fusb302 4-0022: pd header := Sink, Device
[    3.279506] typec_fusb302 4-0022: state change INVALID_STATE -> SNK_UNATTACHED [rev1 NONE_AMS]
[    3.293744] typec_fusb302 4-0022: cc1=Open, cc2=Open
[    3.295734] typec_fusb302 4-0022: CC1: 0 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected]
[    3.297748] typec_fusb302 4-0022: state change SNK_UNATTACHED -> PORT_RESET [rev1 NONE_AMS]
[    3.299760] typec_fusb302 4-0022: 4-0022: registered
[    3.299768] typec_fusb302 4-0022: Setting usb_comm capable false
[    3.308410] typec_fusb302 4-0022: pd := off
[    3.310426] typec_fusb302 4-0022: vbus is already Off
[    3.312417] typec_fusb302 4-0022: charge is already Off
[    3.316388] typec_fusb302 4-0022: vconn is already Off
[    3.316393] typec_fusb302 4-0022: Setting voltage/current limit 5000 mV 3000 mA
[    3.322395] typec_fusb302 4-0022: polarity 0
[    3.324368] typec_fusb302 4-0022: Requesting mux state 0, usb-role 0, orientation 0
[    3.325173] typec_fusb302 4-0022: pd header := Sink, Device
[    3.328478] typec_fusb302 4-0022: cc:=2
[    3.332603] typec_fusb302 4-0022: cc := Rd
[    3.342171] typec_fusb302 4-0022: pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS]
[    3.345420] typec_fusb302 4-0022: state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[    3.349878] typec_fusb302 4-0022: pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS]
[    4.274419] typec_fusb302 4-0022: state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [delayed 920 ms]
[    4.276794] typec_fusb302 4-0022: Start toggling
[    4.282449] typec_fusb302 4-0022: start drp toggling
[    4.283865] typec_fusb302 4-0022: state change SNK_UNATTACHED -> TOGGLING [rev1 NONE_AMS]
[    4.285684] typec_fusb302 4-0022: IRQ: 0x80, a: 0x00, b: 0x00, status0: 0x83
[    4.289609] typec_fusb302 4-0022: IRQ: VBUS_OK, vbus=On
[    4.311033] typec_fusb302 4-0022: IRQ: 0x01, a: 0x40, b: 0x00, status0: 0x81
[    4.315054] typec_fusb302 4-0022: IRQ: TOGDONE
[    4.325478] typec_fusb302 4-0022: detected cc1=Open, cc2=Rp-def
[    4.329371] typec_fusb302 4-0022: cc1=Open, cc2=Rp-def
[    4.330939] typec_fusb302 4-0022: CC1: 0 -> 0, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected]
[    4.332503] typec_fusb302 4-0022: state change TOGGLING -> SNK_ATTACH_WAIT [rev1 NONE_AMS]
[    4.334080] typec_fusb302 4-0022: pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 200 ms [rev1 NONE_AMS]
[    4.535654] typec_fusb302 4-0022: state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 200 ms]
[    4.539852] typec_fusb302 4-0022: state change SNK_DEBOUNCED -> SNK_ATTACHED [rev1 NONE_AMS]
[    4.539856] typec_fusb302 4-0022: polarity 1
[    4.539860] typec_fusb302 4-0022: Requesting mux state 1, usb-role 2, orientation 2
[    4.546567] typec_fusb302 4-0022: pd header := Sink, Device
[    4.546571] typec_fusb302 4-0022: state change SNK_ATTACHED -> SNK_STARTUP [rev1 NONE_AMS]
[    4.546574] typec_fusb302 4-0022: state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
[    4.546578] typec_fusb302 4-0022: Setting voltage/current limit 5000 mV 0 mA
[    4.546585] typec_fusb302 4-0022: vbus=0 charge:=1
[    4.546588] typec_fusb302 4-0022: vbus is already Off
[    4.546591] typec_fusb302 4-0022: state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
[    4.608499] typec_fusb302 4-0022: pd := on
[    4.608503] typec_fusb302 4-0022: pending state change SNK_WAIT_CAPABILITIES -> SNK_SOFT_RESET @ 310 ms [rev3 NONE_AMS]
[    4.918788] typec_fusb302 4-0022: state change SNK_WAIT_CAPABILITIES -> SNK_SOFT_RESET [delayed 310 ms]
[    4.925482] typec_fusb302 4-0022: AMS SOFT_RESET_AMS start
[    4.925492] typec_fusb302 4-0022: state change SNK_SOFT_RESET -> AMS_START [rev3 SOFT_RESET_AMS]
[    4.925500] typec_fusb302 4-0022: state change AMS_START -> SOFT_RESET_SEND [rev3 SOFT_RESET_AMS]
[    4.925514] typec_fusb302 4-0022: PD TX, header: 0x8d
[    4.947943] typec_fusb302 4-0022: sending PD message header: 8d
[    4.979658] typec_fusb302 4-0022: sending PD message len: 0
[    5.022888] typec_fusb302 4-0022: IRQ: 0x41, a: 0x10, b: 0x00, status0: 0x81
[    5.032746] typec_fusb302 4-0022: IRQ: BC_LVL, handler pending
[    5.042486] typec_fusb302 4-0022: IRQ: PD retry failed
[    5.052051] typec_fusb302 4-0022: PD TX complete, status: 2
[    5.061535] typec_fusb302 4-0022: state change SOFT_RESET_SEND -> HARD_RESET_SEND [rev3 SOFT_RESET_AMS]
[    5.068020] typec_fusb302 4-0022: AMS SOFT_RESET_AMS finished
[    5.068026] typec_fusb302 4-0022: AMS HARD_RESET start
[    5.068033] typec_fusb302 4-0022: PD TX, type: 0x5
[    5.070813] typec_fusb302 4-0022: IRQ: 0x41, a: 0x08, b: 0x00, status0: 0x81
[    5.084470] typec_fusb302 4-0022: IRQ: BC_LVL, handler pending
[    5.084474] typec_fusb302 4-0022: IRQ: PD hardreset sent
[    5.085346] typec_fusb302 4-0022: PD TX complete, status: 0
[    5.096695] typec_fusb302 4-0022: state change HARD_RESET_SEND -> HARD_RESET_START [rev3 HARD_RESET]
[    5.116215] typec_fusb302 4-0022: BC_LVL handler, status0=0x81
[    5.126205] typec_fusb302 4-0022: pd := off
[    5.126218] typec_fusb302 4-0022: state change HARD_RESET_START -> SNK_HARD_RESET_SINK_OFF [rev3 HARD_RESET]
[    5.126223] typec_fusb302 4-0022: vconn:=0
[    5.126227] typec_fusb302 4-0022: vconn is already Off
[    5.126233] typec_fusb302 4-0022: Requesting mux state 1, usb-role 2, orientation 2
[    5.126838] typec_fusb302 4-0022: BC_LVL handler, status0=0x81
[    5.233042] typec_fusb302 4-0022: pd header := Sink, Device
[    5.239479] typec_fusb302 4-0022: pending state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_SINK_ON @ 650 ms [rev3 HARD_RESET]
[    5.896215] typec_fusb302 4-0022: state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_SINK_ON [delayed 650 ms]
[    5.897382] typec_fusb302 4-0022: AMS HARD_RESET finished
[    5.899303] typec_fusb302 4-0022: pd header := Sink, Device
[    5.899305] typec_fusb302 4-0022: state change SNK_HARD_RESET_SINK_ON -> SNK_STARTUP [rev3 NONE_AMS]
[    5.899307] typec_fusb302 4-0022: state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
[    5.899309] typec_fusb302 4-0022: Setting voltage/current limit 5000 mV 0 mA
[    5.899313] typec_fusb302 4-0022: state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
[    5.909556] typec_fusb302 4-0022: pd := on
[    5.910669] typec_fusb302 4-0022: pending state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND @ 310 ms [rev3 NONE_AMS]
[    6.221790] typec_fusb302 4-0022: state change SNK_WAIT_CAPABILITIES -> HARD_RESET_SEND [delayed 310 ms]
[    6.221793] typec_fusb302 4-0022: AMS HARD_RESET start
[    6.221795] typec_fusb302 4-0022: PD TX, type: 0x5
[    6.224999] typec_fusb302 4-0022: IRQ: 0x41, a: 0x08, b: 0x00, status0: 0x81
[    6.225011] typec_fusb302 4-0022: IRQ: BC_LVL, handler pending
[    6.225015] typec_fusb302 4-0022: IRQ: PD hardreset sent
[    6.225810] typec_fusb302 4-0022: PD TX complete, status: 0
[    6.225831] typec_fusb302 4-0022: state change HARD_RESET_SEND -> HARD_RESET_START [rev3 HARD_RESET]
[    6.230495] typec_fusb302 4-0022: pd := off
[    6.230500] typec_fusb302 4-0022: state change HARD_RESET_START -> SNK_HARD_RESET_SINK_OFF [rev3 HARD_RESET]
[    6.230502] typec_fusb302 4-0022: vconn:=0
[    6.230504] typec_fusb302 4-0022: vconn is already Off
[    6.230506] typec_fusb302 4-0022: Requesting mux state 1, usb-role 2, orientation 2
[    6.231305] typec_fusb302 4-0022: pd header := Sink, Device
[    6.231309] typec_fusb302 4-0022: pending state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_SINK_ON @ 650 ms [rev3 HARD_RESET]
[    6.256808] typec_fusb302 4-0022: BC_LVL handler, status0=0x81
[    6.881546] typec_fusb302 4-0022: state change SNK_HARD_RESET_SINK_OFF -> SNK_HARD_RESET_SINK_ON [delayed 650 ms]
[    6.881560] typec_fusb302 4-0022: AMS HARD_RESET finished
[    6.882429] typec_fusb302 4-0022: pd header := Sink, Device
[    6.882440] typec_fusb302 4-0022: state change SNK_HARD_RESET_SINK_ON -> SNK_STARTUP [rev3 NONE_AMS]
[    6.882450] typec_fusb302 4-0022: state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
[    6.882459] typec_fusb302 4-0022: Setting voltage/current limit 5000 mV 0 mA
[    6.882481] typec_fusb302 4-0022: state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
[    6.887502] typec_fusb302 4-0022: pd := on
[    6.887519] typec_fusb302 4-0022: pending state change SNK_WAIT_CAPABILITIES -> SNK_READY @ 310 ms [rev3 NONE_AMS]
[    7.197548] typec_fusb302 4-0022: state change SNK_WAIT_CAPABILITIES -> SNK_READY [delayed 310 ms]