amdprophet/HMC Basic Commands.md

## HMC Basic Commands.md

      
    Raw
  

              HMC Basic Commands.md
            
          
    HMC Basic Commands

Show managed frames attached to a hmc

lssyscfg -r sys -F name:type_model:serial_num
Show managed lpars attached to a frame

lssyscfg -m <frame> -r lpar -F name
Show profiles from a specific lpar

lssyscfg -r prof -m <frame> --filter "lpar_names=<lpar>"
Shutdown lpar from HMC

chsysstate -m <frame> -r lpar -n <lpar> -o shutdown –immed
To perform a partition shutdown using the shutdown command on the client operating system

chsysstate -r lpar -o osshutdown –n <lpar> -m <frame>
To perform a delayed partition shut down (white button shut down)

chsysstate -r lpar -o shutdown –n <lpar> -m <frame>
To perform an immediate partition shutdown (operator panel function)

chsysstate -r lpar -o shutdown --immed –n <lpar> -m <frame>
To perform an immediate restart of a partition (operator panel function 3)

chsysstate -r lpar -o shutdown --immed --restart –n <lpar> -m <frame>
To perform a restart of a partition after initiating a dump (operator panel function 22)

chsysstate -r lpar -o dumprestart –n <lpar> -m <frame>
Boot lpar

chsysstate -r lpar -m <frame> -o on -n <lpar> -f <profile>
To perform a partition boot into system management services

chsysstate -r lpar -m <frame> -o on -n <lpar> -b sms
To perform a partition boot into diagnostic with default bootlist

chsysstate -r lpar -m <frame> -o on -n <lpar> -b dd
To perform a partition boot into diagnostic with stored bootlist

chsysstate -r lpar -m <frame> -o on -n <lpar> -b ds
To perform a partition boot into diagnostic with stored bootlist

chsysstate -r lpar -m <frame> -o on -n <lpar> -b ds
To perform a partition boot into open firmware OK prompt

chsysstate -r lpar -m <frame> -o on -n <lpar> -b of
To perform a partition boot into normal mode

chsysstate -r lpar -m <frame> -o on -n <lpar> -b norm
Show free processor/memory/adapters on specific frame/lpar

Proc

lshwres -r proc -m <framename> --level sys
lshwres -r proc -m <framename> --level lpar
Mem

lshwres -r mem -m <framename> --level sys
lshwres -r mem -m <framename> --level lpar
Adapters

lshwres -r hca -m <framename> --level sys
lshwres -r hca -m <framename> --level lpar
Show io resources in a frame

lshwres -r io --rsubtype unit -m <frame>
lshwres -r io --rsubtype bus -m <frame>
lshwres -r io --rsubtype slot -m <frame>