8BitDo Ultimate 2.4GHz wifi working in linux

8BitDoUltimateWifi_Linux.MD

FROM https://www.reddit.com/r/Fedora/comments/zmvkdj/8bitdo_ultimate_bluetooth_controller_working_in/

---

I've bought this new controller from 8BitDo and wished to use on linux, to my sadness the controller didn't work out of the box, neither by cable, the 2.4G dongle or bluetooth.

So I've tried a number of solutions and this one from u/GodOfEmus over in the 8bitdo community was the one to work for me:

1. Create a new file /etc/udev/rules.d/99-8bitdo-xinput.rules
2. Paste this udev rule in there, then save and exit the file:

  ACTION=="add", ATTRS{idVendor}=="2dc8", ATTRS{idProduct}=="3106", RUN+="/sbin/modprobe xpad", RUN+="/bin/sh -c 'echo 2dc8 3106 > /sys/bus/usb/drivers/xpad/new_id'"

3. Run the following command in a terminal: sudo udevadm control --reload
4. Unplug and replug the controller if it was already plugged in, it might take a second if you have the bluetooth version

It will basically "cheat" the OS to see the controller as an generic xbox device, so sadly no bluetooth nor gyro control if you care about that, but the rumbling is working for me.

Link to the original post: https://www.reddit.com/r/8bitdo/comments/ykdsmv/ultimate_24_ghz_model_right_analog_not_working_in/

And link to the comment of u/GodOfEmus with the solution: https://www.reddit.com/r/8bitdo/comments/ykdsmv/comment/iv48s4k/?utm_source=share&utm_medium=web2x&context=3

Sharing this solution here to spread the word in our community

JFYI: it works out of the box on latest Linux Mint 21.3 with 6.5 kernel. Also it works out of the box on Steam Deck.

This was a big help, thanks!

Works out of the box in Fedora 40 now! I just bought the controller, plugged the 2.4GHz dongle in and it just works! also works via cable. Tho I only tested X input mode

Annoyingly the wireless dongle doesn't seem to have power/wakeup support, also, controller just doesn't work in general for me on Kernel 6.8

Annoyingly the wireless dongle doesn't seem to have power/wakeup support, also, controller just doesn't work in general for me on Kernel 6.8

I concur. I'm having issues where sometimes Garuda Linux will see it connected, and sometimes it won't. The udev rule in this gist also didn't help fix it.

For anyone who is looking to just make the controller work but not make it "cheat" the OS. You can use udev to give its input files read/write permissions.

1. create a /etc/udev/rules.d/99-8bitdo-xinput.rules with your favorite editor
2. inside the file, add the following:
   1. ACTION=="add", ATTRS{idVendor}=="2dc8", ATTRS{idProduct}=="3016", MODE="0666"
   2. This gives the input file of any 8bitdo controller R/W permissions automatically when connected.
3. reload udev with sudo udevadm control --reload-rules or just reboot your computer.

This is helpful when you want to just read the controller's input according to SDL, not remapping to an xbox controller. Example use case is when you want it to work with ROS (https://answers.ros.org/question/384456/ros2-joy_node-debugging/)

FYI always check your model. the new ultimate 2.4ghz w/ the hall effect joysticks have id of 3109.

FYI always check your model. the new ultimate 2.4ghz w/ the hall effect joysticks have id of 3109.

Yeah, I haven't actually been using any of the udev rules here, been writing my own. I updated to kernel 6.9.5 and haven't had any issues with the controller not working since, but still not seeing power/wakeup support. Wondering if they shipped the new hall effect ultimate controllers with a worse dongle.

cat "${${$(grep 3109 /sys/bus/usb/devices/*/idProduct):0:-5}/idProduct/power/wake}"
cat: /sys/bus/usb/devices/1-3/power/wake: No such file or directory

Certainly seems like they shipped the new ones with a crappier dongle, if this does turn out to be the case, they've definitely lost a customer in me, given they marketed this controller around the steam deck, knowing full well that the steam deck community wants a controller that can wake the system remotely.

I bought the Bluetooth/dongle version earlier this year, while the dongle is still causing problems with constant disconnects when using Bluetooth it works out of the box and can be tested with evtest.

I worked for me on Lubuntu 22.04 for the "8Bitdo Ultimate C 2.4g".
Thank you!

Just as described:

1️⃣ I ran: sudo nano /etc/udev/rules.d/99-8bitdo-xinput.rules and typed my computer password

2️⃣ I pasted the following line:
ACTION=="add", ATTRS{idVendor}=="2dc8", ATTRS{idProduct}=="3106", RUN+="/sbin/modprobe xpad", RUN+="/bin/sh -c 'echo 2dc8 3106 > /sys/bus/usb/drivers/xpad/new_id'"

3️⃣ I pressed: CTRL + X

4️⃣ I typed "y" and then "ENTER" to save the buffer

5️⃣ I pressed "ENTER" one again

6️⃣ I ran: sudo udevadm control --reload

7️⃣ Disconnected the 2.4g receiver

8️⃣ Connected the 2.4g receiver

9️⃣ I pressed and held the "X button + 8bitdo button" in the controller until it did a small vibration

🔟 DONE!