morningreis

OPNsense + ProtonVPN + Wireguard

Published: 16 December 2022

Reference: https://docs.opnsense.org/manual/how-tos/wireguard-selective-routing.html

Goal: Set up one or more Wireguard connections from ProtonVPN on OPNsense, with policy based routing, and optional Killswitch.

I'm writing this guide first as a reference for my future self for when I inevitably forget how to do this, but also to help others out. I found there were not many guides on this specific configuration, particularly not with multiple concurrent connections, and these were some steps which were not at all obvious. I did begin with the guide in the official OPNsense documentation, but even that was missing info to make ProtonVPN work. If you are a pfSense user, it is very similar to OPNsense, and you should be able to follow along with some success, but I have not tested it myself.

ssddanbrown

@if ($format === 'pdf')
<style media="print">
    .print-header-footer {
        position: fixed;
        width: 100%;
    }

    .print-footer {
        position: fixed;
        bottom: -40px;

tstellanova

Install pigpio

If you're working with the rpi3's gpio, the pigpio library can be very handy.

sudo apt-get update
sudo apt-get install pigpio 

If you also want to access pigpio from python, install: sudo apt-get install python-pigpio python3-pigpio

Setup pigpiod service to run at boot

colinux

#!/bin/bash

# Renames subtitles files according to tv shows names found in a directory
# Acceped syntaxes for season/episode are: 304, s3e04, s03e04, 3x04 (case insensitive)
#
# Usage:
# Put this gist somewhere in your $PATH, like /usr/local/bin/subtitles-renamer
# Chmod +x it
# cd ~/YourHolidaysTvShowsWithSubtitles
# subtitles-renamer