andreineculau/.bashrc

## .bashrc
. /usr/local/share/liquidprompt
. path/to/lp_andreineculau.theme
lp_theme andreineculau

## .liquidpromptrc
### ~/.liquidpromptrc
### NOTE customization at the bottom,
### on top of vanilla https://github.com/nojhan/liquidprompt/blob/master/liquidpromptrc-dist

####################################
# LIQUID PROMPT CONFIGURATION FILE #
####################################

# This example config file does not contain all possible config options, nor
# does it have detailed option descriptions. See the documentation for that:
# https://liquidprompt.readthedocs.io/en/stable/config.html

# If you want to use different themes and features,
# you can load the corresponding files here:
#source ~/.config/liquidprompt/nojhan.theme
#LP_PS1_FILE=~/.config/liquidprompt/nojhan.ps1

#############
# BEHAVIOUR #
#############

# Display the battery level in more urgent color when the level is below this threshold.
# Recommended value is 75
LP_BATTERY_THRESHOLD=75

# Display the load average over the past minute when above this threshold.
# This value is scaled per CPU, so on a quad-core machine, the load average
# would need to be 2.40 or greater to be displayed.
# Recommended value is 0.60
LP_LOAD_THRESHOLD=0.60

# Display the temperature when the temperate is above this threshold (in
# degrees Celsius).
# Recommended value is 60
LP_TEMP_THRESHOLD=60

# Use the shorten path feature if the path is too long to fit in the prompt
# line.
# Recommended value is 1
LP_ENABLE_SHORTEN_PATH=1

# The maximum percentage of the screen width used to display the path before
# removing the center portion of the path and replacing with '...'.
# Recommended value is 35
LP_PATH_LENGTH=35

# The number of directories (including '/') to keep at the beginning of a
# shortened path.
# Recommended value is 2
LP_PATH_KEEP=2

# Determine if the hostname should always be displayed, even if not connecting
# through network.
# Defaults to 0 (do not display hostname when locally connected)
# set to 1 if you want to always see the hostname
# set to -1 if you want to never see the hostname
LP_HOSTNAME_ALWAYS=0

# Use the fully qualified domain name (FQDN) instead of the short hostname when
# the hostname is displayed
LP_ENABLE_FQDN=0

# When to display the user name:
# 1: always display the user name
# 0: hide the logged user (always display different users)
# -1: never display the user name
# Default value is 1
LP_USER_ALWAYS=1

# Display the actual values of load/batteries along with their
# corresponding marks. Set to 0 to only print the colored marks.
# Defaults to 1 (display percentages)
LP_PERCENTS_ALWAYS=1

# Use the permissions feature and display a red ':' before the prompt to show
# when you don't have write permission to the current directory.
# Recommended value is 1
LP_ENABLE_PERM=1

# Enable the proxy detection feature.
# Recommended value is 1
LP_ENABLE_PROXY=1

# Enable the jobs feature.
# Recommended value is 1
LP_ENABLE_JOBS=1

# Enable the detached sessions feature.
# Default value is 1
LP_ENABLE_DETACHED_SESSIONS=1

# Enable the load feature.
# Recommended value is 1
LP_ENABLE_LOAD=1

# Enable the battery feature.
# Recommended value is 1
LP_ENABLE_BATT=1

# Enable the 'sudo credentials' feature.
# Be warned that this may pollute the syslog if you don't have sudo
# credentials, and the sysadmin might hate you.
LP_ENABLE_SUDO=0

# Enable the directory stack support.
LP_ENABLE_DIRSTACK=0

# Enable the VCS features with the root account.
# Recommended value is 0
LP_ENABLE_VCS_ROOT=0

# Enable the Git special features.
# Recommended value is 1
LP_ENABLE_GIT=1

# Enable the Subversion special features.
# Recommended value is 1
LP_ENABLE_SVN=1

# Enable the Mercurial special features.
# Recommended value is 1
LP_ENABLE_HG=1

# Enable the Fossil special features.
# Recommended value is 1
LP_ENABLE_FOSSIL=1

# Enable the Bazaar special features.
# Recommended value is 1
LP_ENABLE_BZR=1

# Show time of when the current prompt was displayed.
LP_ENABLE_TIME=0

# Show runtime of the previous command if over LP_RUNTIME_THRESHOLD
# Recommended value is 0
LP_ENABLE_RUNTIME=0

# Minimal runtime (in seconds) before the runtime will be displayed
# Recommended value is 2
LP_RUNTIME_THRESHOLD=2

# Ring the terminal bell if the runtime of the previous command exceeded
# LP_RUNTIME_BELL_THRESHOLD
# Recommended value is 0
LP_ENABLE_RUNTIME_BELL=0

# Minimal runtime (in seconds) before the terminal bell will be rung.
# Recommended value is 10
LP_RUNTIME_BELL_THRESHOLD=10

# Display the virtualenv that is currently activated, if any
# Recommended value is 1
LP_ENABLE_VIRTUALENV=1

# Display the ruby virtual env that is currently activated, if any
# Recommended value is 1
LP_ENABLE_RUBY_VENV=1

# If using RVM, personalize the rvm-prompt.
# see http://rvm.io/workflow/prompt for details.
# Warning, this variable must be a shell array.
LP_RUBY_RVM_PROMPT_OPTIONS=(i v g s)

# Display the terraform workspace that is currently activated, if any
# Recommended value is 0
LP_ENABLE_TERRAFORM=0

# Display the enabled software collections, if any
# Recommended value is 1
LP_ENABLE_SCLS=1

# Show current Kubernetes kubectl context
LP_ENABLE_KUBECONTEXT=0

# Delimiter to shorten kubectl context by removing a suffix.
# E.g. when your context names are dev-cluster and test-cluster, set to "-"
# in order to output "dev" and "test" in prompt.
LP_DELIMITER_KUBECONTEXT_SUFFIX=

# Delimiter to shorten kubectl context by removing a prefix.
# E.g. when your context names are like
# arn:aws:eks:$REGION:$ACCOUNT_ID:cluster/$CLUSTER_NAME, set to "/"
# in order to output "$CLUSTER_NAME" in prompt.
LP_DELIMITER_KUBECONTEXT_PREFIX=

# Display the current active AWS_PROFILE, if any
# Recommended value is 1
LP_ENABLE_AWS_PROFILE=1

# Show highest system temperature
LP_ENABLE_TEMP=1

# When showing the time, use an analog clock instead of numeric values.
# Recommended value is 0
LP_TIME_ANALOG=0

# Use the prompt as the title of the terminal window
# Recommended value is 0
LP_ENABLE_TITLE=0

# Enable Title for screen, byobu, and tmux
LP_ENABLE_SCREEN_TITLE=0

# Use different colors for the different hosts you SSH to
LP_ENABLE_SSH_COLORS=0

# Show the error code of the last command if it was not 0
LP_ENABLE_ERROR=1

# Specify an array of absolute paths in which all vcs will be disabled.
# Ex: ("/root" "/home/me/large-remove-svn-repo")
LP_DISABLED_VCS_PATHS=()

# Use a local liquidpromptrc if it exists.
# Can be helpful if you sync your primary config across machines, or if
# there's a system-wide config at /etc/liquidpromptrc from which you'd
# like to make only minor deviations.
#LOCAL_RCFILE=$HOME/.liquidpromptrc.local
#[ -f "$LOCAL_RCFILE" ] && source "$LOCAL_RCFILE"

# vim: set et sts=4 sw=4 tw=120 ft=sh:

########################################################################################################################

LP_ENABLE_SHORTEN_PATH=0
LP_HOSTNAME_ALWAYS=1
LP_ENABLE_TIME=1
LP_ENABLE_RUNTIME=1
LP_RUNTIME_THRESHOLD=0
LP_ENABLE_TEMP=1
LP_ENABLE_TITLE=1
LP_ENABLE_SCREEN_TITLE=1
LP_ENABLE_SSH_COLORS=1
LP_MARK_DIRSTACK="≡"
LP_ENABLE_DIRSTACK=0
LP_MARK_PERM=""
LP_ENABLE_PERM=0

## lp_andreineculau.theme
_lp_andreineculau_theme_activate() {
    _lp_default_theme_activate
}

_lp_andreineculau_theme_directory() {
    _lp_default_theme_directory
}

_lp_andreineculau_theme_prompt() {
    _lp_default_theme_prompt_data
    # _lp_default_theme_prompt_template

    PS1=$'\n'
    PS1+="${LP_PS1_PREFIX}"
    local PS1_MISC="${LP_ERR}${LP_RUNTIME} ${LP_TIME}${LP_JOBS}${LP_BATT}${LP_LOAD}${LP_TEMP}"
    if (( _LP_SHELL_zsh )); then
        RPROMPT="${PS1_MISC}"
    else
        PS1+="${LP_PS1_LINE_PREFIX:-}${PS1_MISC}${LP_PS1_LINE_POSTFIX:-}"
        PS1+=$'\n'
    fi

    local MAYBE_SHLVL=${SHLVL}
    [[ "${MAYBE_SHLVL}" != "1" ]] || MAYBE_SHLVL=" "
    # PS1+="${LP_PS1_LINE_PREFIX:-}${MAYBE_SHLVL}${LP_PWD}${LP_PERM}${LP_DIRSTACK} as ${LP_USER}${LP_HOST}${LP_PS1_LINE_POSTFIX:-}"$'\n'
    PS1+="${LP_PS1_LINE_PREFIX:-}${MAYBE_SHLVL}${LP_PWD} as ${LP_USER}${LP_HOST}${LP_PS1_LINE_POSTFIX:-}"$'\n'

    local PS1_ENV="${LP_SCLS}${LP_AWS_PROFILE}${LP_VENV}${LP_RUBY_VENV}${LP_TFSPACE}${LP_KUBECONTEXT}${LP_PROXY}"
    [[ -z "${PS1_ENV}" ]] || PS1+="${LP_PS1_LINE_PREFIX:-}${PS1_ENV}${LP_PS1_LINE_POSTFIX:-}"$'\n'

    local PS1_VCS="${LP_VCS:1}"
    if _lp_find_vcs; then
        _lp_vcs_commit_id
        PS1_VCS+=" ${lp_vcs_commit_id}"
        if [[ "${lp_vcs_type}" = "git" ]]; then
            local GIT_REF=$(git -C "${lp_vcs_root}" symbolic-ref -q HEAD 2>/dev/null | head -1 | sed "s/HEAD//")
            PS1_VCS+=" $(git -C "${lp_vcs_root}" for-each-ref --format="%(upstream:short)" ${GIT_REF:-HEAD} 2>/dev/null)"

            # local GIT_TRACK_REMOTE=$(git -C "${lp_vcs_root}" for-each-ref --format="%(upstream:short)" ${GIT_REF} 2>/dev/null | cut -d"/" -f1)
            # if [[ -n "${GIT_TRACK_REMOTE}" ]]; then
            #     local GIT_TRACK_REMOTE_URL=$(git -C "${lp_vcs_root}" remote get-url ${GIT_TRACK_REMOTE})
            #     if [[ -n "${GIT_TRACK_REMOTE_URL}" ]] && [[ "${GIT_TRACK_REMOTE_URL}" =~ github\.com ]]; then
            #         local GITHUB_REPO=$(echo "${GIT_TRACK_REMOTE_URL}" | sed "s,.*github.com[:/],," | sed "s,\.git$,,")

            #         local GIT_HASH=$(git -C "${lp_vcs_root}" log -n 1 --pretty=format:%h 2>/dev/null)
            #         local GITHUB_STATUS_URL="https://api.github.com/repos/${GITHUB_REPO}/commits/${GIT_HASH}/status"
            #         local PS_GIT_HUB_CI_STATUS="$(curl -qfs -H "Accept: application/vnd.github.v3+json" ${GITHUB_STATUS_URL} | jq -r .state)"
            #         case ${PS_GIT_HUB_CI_STATUS} in
            #             "")
            #             ;;
            #             neutral,cancelled)
            #                 PS_GIT_HUB_CI_STATUS="${GREY}CI:??${NORMAL}"
            #                 ;;
            #             pending)
            #                 PS_GIT_HUB_CI_STATUS="${GREY}CI:..${NORMAL}"
            #                 ;;
            #             success)
            #                 PS_GIT_HUB_CI_STATUS="${GREEN}CI:+1${NORMAL}"
            #                 ;;
            #             *)
            #                 # PS_GIT_HUB_CI_STATUS="${RED}!! $(hub ci-status -f '%U')${NORMAL}"
            #                 PS_GIT_HUB_CI_STATUS="${RED}CI:${PS_GIT_HUB_CI_STATUS}${NORMAL}"
            #                 ;;
            #         esac
            #         PS1_VCS+=" ${PS_GIT_HUB_CI_STATUS}"
            #     fi
            # fi
        fi
    fi
    [[ -z "${PS1_VCS}" ]] || PS1+="${LP_PS1_LINE_PREFIX:-}${PS1_VCS}${LP_PS1_LINE_POSTFIX:-}"$'\n'

    PS1+="${LP_PS1_LINE_PREFIX:-}${LP_MARK_PREFIX:1}${LP_COLOR_MARK}${LP_MARK_DEFAULT} ${LP_PS1_LINE_POSTFIX:-}"
    PS1+="${LP_PS1_POSTFIX}"

    _lp_formatted_title "${LP_PS1_PREFIX}${LP_MARK_BRACKET_OPEN}${lp_username_raw-}${lp_hostname_raw+@}${lp_hostname_raw-}${LP_MARK_PERM}${lp_path-}${LP_MARK_BRACKET_CLOSE}${LP_MARK_PREFIX}${lp_smart_mark} ${LP_PS1_POSTFIX}"
}
	. /usr/local/share/liquidprompt
	. path/to/lp_andreineculau.theme
	lp_theme andreineculau
	### ~/.liquidpromptrc
	### NOTE customization at the bottom,
	### on top of vanilla https://github.com/nojhan/liquidprompt/blob/master/liquidpromptrc-dist

	####################################
	# LIQUID PROMPT CONFIGURATION FILE #
	####################################

	# This example config file does not contain all possible config options, nor
	# does it have detailed option descriptions. See the documentation for that:
	# https://liquidprompt.readthedocs.io/en/stable/config.html

	# If you want to use different themes and features,
	# you can load the corresponding files here:
	#source ~/.config/liquidprompt/nojhan.theme
	#LP_PS1_FILE=~/.config/liquidprompt/nojhan.ps1

	#############
	# BEHAVIOUR #
	#############

	# Display the battery level in more urgent color when the level is below this threshold.
	# Recommended value is 75
	LP_BATTERY_THRESHOLD=75

	# Display the load average over the past minute when above this threshold.
	# This value is scaled per CPU, so on a quad-core machine, the load average
	# would need to be 2.40 or greater to be displayed.
	# Recommended value is 0.60
	LP_LOAD_THRESHOLD=0.60

	# Display the temperature when the temperate is above this threshold (in
	# degrees Celsius).
	# Recommended value is 60
	LP_TEMP_THRESHOLD=60

	# Use the shorten path feature if the path is too long to fit in the prompt
	# line.
	# Recommended value is 1
	LP_ENABLE_SHORTEN_PATH=1

	# The maximum percentage of the screen width used to display the path before
	# removing the center portion of the path and replacing with '...'.
	# Recommended value is 35
	LP_PATH_LENGTH=35

	# The number of directories (including '/') to keep at the beginning of a
	# shortened path.
	# Recommended value is 2
	LP_PATH_KEEP=2

	# Determine if the hostname should always be displayed, even if not connecting
	# through network.
	# Defaults to 0 (do not display hostname when locally connected)
	# set to 1 if you want to always see the hostname
	# set to -1 if you want to never see the hostname
	LP_HOSTNAME_ALWAYS=0

	# Use the fully qualified domain name (FQDN) instead of the short hostname when
	# the hostname is displayed
	LP_ENABLE_FQDN=0

	# When to display the user name:
	# 1: always display the user name
	# 0: hide the logged user (always display different users)
	# -1: never display the user name
	# Default value is 1
	LP_USER_ALWAYS=1

	# Display the actual values of load/batteries along with their
	# corresponding marks. Set to 0 to only print the colored marks.
	# Defaults to 1 (display percentages)
	LP_PERCENTS_ALWAYS=1

	# Use the permissions feature and display a red ':' before the prompt to show
	# when you don't have write permission to the current directory.
	# Recommended value is 1
	LP_ENABLE_PERM=1

	# Enable the proxy detection feature.
	# Recommended value is 1
	LP_ENABLE_PROXY=1

	# Enable the jobs feature.
	# Recommended value is 1
	LP_ENABLE_JOBS=1

	# Enable the detached sessions feature.
	# Default value is 1
	LP_ENABLE_DETACHED_SESSIONS=1

	# Enable the load feature.
	# Recommended value is 1
	LP_ENABLE_LOAD=1

	# Enable the battery feature.
	# Recommended value is 1
	LP_ENABLE_BATT=1

	# Enable the 'sudo credentials' feature.
	# Be warned that this may pollute the syslog if you don't have sudo
	# credentials, and the sysadmin might hate you.
	LP_ENABLE_SUDO=0

	# Enable the directory stack support.
	LP_ENABLE_DIRSTACK=0

	# Enable the VCS features with the root account.
	# Recommended value is 0
	LP_ENABLE_VCS_ROOT=0

	# Enable the Git special features.
	# Recommended value is 1
	LP_ENABLE_GIT=1

	# Enable the Subversion special features.
	# Recommended value is 1
	LP_ENABLE_SVN=1

	# Enable the Mercurial special features.
	# Recommended value is 1
	LP_ENABLE_HG=1

	# Enable the Fossil special features.
	# Recommended value is 1
	LP_ENABLE_FOSSIL=1

	# Enable the Bazaar special features.
	# Recommended value is 1
	LP_ENABLE_BZR=1

	# Show time of when the current prompt was displayed.
	LP_ENABLE_TIME=0

	# Show runtime of the previous command if over LP_RUNTIME_THRESHOLD
	# Recommended value is 0
	LP_ENABLE_RUNTIME=0

	# Minimal runtime (in seconds) before the runtime will be displayed
	# Recommended value is 2
	LP_RUNTIME_THRESHOLD=2

	# Ring the terminal bell if the runtime of the previous command exceeded
	# LP_RUNTIME_BELL_THRESHOLD
	# Recommended value is 0
	LP_ENABLE_RUNTIME_BELL=0

	# Minimal runtime (in seconds) before the terminal bell will be rung.
	# Recommended value is 10
	LP_RUNTIME_BELL_THRESHOLD=10

	# Display the virtualenv that is currently activated, if any
	# Recommended value is 1
	LP_ENABLE_VIRTUALENV=1

	# Display the ruby virtual env that is currently activated, if any
	# Recommended value is 1
	LP_ENABLE_RUBY_VENV=1

	# If using RVM, personalize the rvm-prompt.
	# see http://rvm.io/workflow/prompt for details.
	# Warning, this variable must be a shell array.
	LP_RUBY_RVM_PROMPT_OPTIONS=(i v g s)

	# Display the terraform workspace that is currently activated, if any
	# Recommended value is 0
	LP_ENABLE_TERRAFORM=0

	# Display the enabled software collections, if any
	# Recommended value is 1
	LP_ENABLE_SCLS=1

	# Show current Kubernetes kubectl context
	LP_ENABLE_KUBECONTEXT=0

	# Delimiter to shorten kubectl context by removing a suffix.
	# E.g. when your context names are dev-cluster and test-cluster, set to "-"
	# in order to output "dev" and "test" in prompt.
	LP_DELIMITER_KUBECONTEXT_SUFFIX=

	# Delimiter to shorten kubectl context by removing a prefix.
	# E.g. when your context names are like
	# arn:aws:eks:$REGION:$ACCOUNT_ID:cluster/$CLUSTER_NAME, set to "/"
	# in order to output "$CLUSTER_NAME" in prompt.
	LP_DELIMITER_KUBECONTEXT_PREFIX=

	# Display the current active AWS_PROFILE, if any
	# Recommended value is 1
	LP_ENABLE_AWS_PROFILE=1

	# Show highest system temperature
	LP_ENABLE_TEMP=1

	# When showing the time, use an analog clock instead of numeric values.
	# Recommended value is 0
	LP_TIME_ANALOG=0

	# Use the prompt as the title of the terminal window
	# Recommended value is 0
	LP_ENABLE_TITLE=0

	# Enable Title for screen, byobu, and tmux
	LP_ENABLE_SCREEN_TITLE=0

	# Use different colors for the different hosts you SSH to
	LP_ENABLE_SSH_COLORS=0

	# Show the error code of the last command if it was not 0
	LP_ENABLE_ERROR=1

	# Specify an array of absolute paths in which all vcs will be disabled.
	# Ex: ("/root" "/home/me/large-remove-svn-repo")
	LP_DISABLED_VCS_PATHS=()

	# Use a local liquidpromptrc if it exists.
	# Can be helpful if you sync your primary config across machines, or if
	# there's a system-wide config at /etc/liquidpromptrc from which you'd
	# like to make only minor deviations.
	#LOCAL_RCFILE=$HOME/.liquidpromptrc.local
	#[ -f "$LOCAL_RCFILE" ] && source "$LOCAL_RCFILE"

	# vim: set et sts=4 sw=4 tw=120 ft=sh:

	########################################################################################################################

	LP_ENABLE_SHORTEN_PATH=0
	LP_HOSTNAME_ALWAYS=1
	LP_ENABLE_TIME=1
	LP_ENABLE_RUNTIME=1
	LP_RUNTIME_THRESHOLD=0
	LP_ENABLE_TEMP=1
	LP_ENABLE_TITLE=1
	LP_ENABLE_SCREEN_TITLE=1
	LP_ENABLE_SSH_COLORS=1
	LP_MARK_DIRSTACK="≡"
	LP_ENABLE_DIRSTACK=0
	LP_MARK_PERM=""
	LP_ENABLE_PERM=0
	_lp_andreineculau_theme_activate() {
	_lp_default_theme_activate
	}

	_lp_andreineculau_theme_directory() {
	_lp_default_theme_directory
	}

	_lp_andreineculau_theme_prompt() {
	_lp_default_theme_prompt_data
	# _lp_default_theme_prompt_template

	PS1=$'\n'
	PS1+="${LP_PS1_PREFIX}"
	local PS1_MISC="${LP_ERR}${LP_RUNTIME} ${LP_TIME}${LP_JOBS}${LP_BATT}${LP_LOAD}${LP_TEMP}"
	if (( _LP_SHELL_zsh )); then
	RPROMPT="${PS1_MISC}"
	else
	PS1+="${LP_PS1_LINE_PREFIX:-}${PS1_MISC}${LP_PS1_LINE_POSTFIX:-}"
	PS1+=$'\n'
	fi

	local MAYBE_SHLVL=${SHLVL}
	[[ "${MAYBE_SHLVL}" != "1" ]] \|\| MAYBE_SHLVL=" "
	# PS1+="${LP_PS1_LINE_PREFIX:-}${MAYBE_SHLVL}${LP_PWD}${LP_PERM}${LP_DIRSTACK} as ${LP_USER}${LP_HOST}${LP_PS1_LINE_POSTFIX:-}"$'\n'
	PS1+="${LP_PS1_LINE_PREFIX:-}${MAYBE_SHLVL}${LP_PWD} as ${LP_USER}${LP_HOST}${LP_PS1_LINE_POSTFIX:-}"$'\n'

	local PS1_ENV="${LP_SCLS}${LP_AWS_PROFILE}${LP_VENV}${LP_RUBY_VENV}${LP_TFSPACE}${LP_KUBECONTEXT}${LP_PROXY}"
	[[ -z "${PS1_ENV}" ]] \|\| PS1+="${LP_PS1_LINE_PREFIX:-}${PS1_ENV}${LP_PS1_LINE_POSTFIX:-}"$'\n'

	local PS1_VCS="${LP_VCS:1}"
	if _lp_find_vcs; then
	_lp_vcs_commit_id
	PS1_VCS+=" ${lp_vcs_commit_id}"
	if [[ "${lp_vcs_type}" = "git" ]]; then
	local GIT_REF=$(git -C "${lp_vcs_root}" symbolic-ref -q HEAD 2>/dev/null \| head -1 \| sed "s/HEAD//")
	PS1_VCS+=" $(git -C "${lp_vcs_root}" for-each-ref --format="%(upstream:short)" ${GIT_REF:-HEAD} 2>/dev/null)"

	# local GIT_TRACK_REMOTE=$(git -C "${lp_vcs_root}" for-each-ref --format="%(upstream:short)" ${GIT_REF} 2>/dev/null \| cut -d"/" -f1)
	# if [[ -n "${GIT_TRACK_REMOTE}" ]]; then
	# local GIT_TRACK_REMOTE_URL=$(git -C "${lp_vcs_root}" remote get-url ${GIT_TRACK_REMOTE})
	# if [[ -n "${GIT_TRACK_REMOTE_URL}" ]] && [[ "${GIT_TRACK_REMOTE_URL}" =~ github\.com ]]; then
	# local GITHUB_REPO=$(echo "${GIT_TRACK_REMOTE_URL}" \| sed "s,.*github.com[:/],," \| sed "s,\.git$,,")

	# local GIT_HASH=$(git -C "${lp_vcs_root}" log -n 1 --pretty=format:%h 2>/dev/null)
	# local GITHUB_STATUS_URL="https://api.github.com/repos/${GITHUB_REPO}/commits/${GIT_HASH}/status"
	# local PS_GIT_HUB_CI_STATUS="$(curl -qfs -H "Accept: application/vnd.github.v3+json" ${GITHUB_STATUS_URL} \| jq -r .state)"
	# case ${PS_GIT_HUB_CI_STATUS} in
	# "")
	# ;;
	# neutral,cancelled)
	# PS_GIT_HUB_CI_STATUS="${GREY}CI:??${NORMAL}"
	# ;;
	# pending)
	# PS_GIT_HUB_CI_STATUS="${GREY}CI:..${NORMAL}"
	# ;;
	# success)
	# PS_GIT_HUB_CI_STATUS="${GREEN}CI:+1${NORMAL}"
	# ;;
	# *)
	# # PS_GIT_HUB_CI_STATUS="${RED}!! $(hub ci-status -f '%U')${NORMAL}"
	# PS_GIT_HUB_CI_STATUS="${RED}CI:${PS_GIT_HUB_CI_STATUS}${NORMAL}"
	# ;;
	# esac
	# PS1_VCS+=" ${PS_GIT_HUB_CI_STATUS}"
	# fi
	# fi
	fi
	fi
	[[ -z "${PS1_VCS}" ]] \|\| PS1+="${LP_PS1_LINE_PREFIX:-}${PS1_VCS}${LP_PS1_LINE_POSTFIX:-}"$'\n'

	PS1+="${LP_PS1_LINE_PREFIX:-}${LP_MARK_PREFIX:1}${LP_COLOR_MARK}${LP_MARK_DEFAULT} ${LP_PS1_LINE_POSTFIX:-}"
	PS1+="${LP_PS1_POSTFIX}"

	_lp_formatted_title "${LP_PS1_PREFIX}${LP_MARK_BRACKET_OPEN}${lp_username_raw-}${lp_hostname_raw+@}${lp_hostname_raw-}${LP_MARK_PERM}${lp_path-}${LP_MARK_BRACKET_CLOSE}${LP_MARK_PREFIX}${lp_smart_mark} ${LP_PS1_POSTFIX}"
	}