tiltswitch_demo.ino

int tiltX = 9;
int tiltZ = 12;
int tiltY = 6;

void setup() {
  // put your setup code here, to run once:
  pinMode(13, OUTPUT);
  digitalWrite(13, 0);
  pinMode(tiltZ, INPUT_PULLUP);
  pinMode(10, OUTPUT);
  digitalWrite(10, 0);
  pinMode(tiltX, INPUT_PULLUP);
  pinMode(7, OUTPUT);
  digitalWrite(7, 0);
  pinMode(tiltY, INPUT_PULLUP);

  pinMode(A0, OUTPUT);
  pinMode(A1, OUTPUT);
  digitalWrite(A1, 0);

  pinMode(A2, OUTPUT);
  pinMode(A3, OUTPUT);
  digitalWrite(A3, 0);

  pinMode(A4, OUTPUT);
  pinMode(A5, OUTPUT);
  digitalWrite(A5, 0);

  Serial.begin(115200);
}

void loop() {
  // put your main code here, to run repeatedly:
  Serial.print("X: ");
  Serial.println(digitalRead(tiltX));
  if (digitalRead(tiltX) == 0) {
    digitalWrite(A0, 1);
  } else {
    digitalWrite(A0, 0);
  }
  Serial.print("Y: ");
  Serial.println(digitalRead(tiltY));
  if (digitalRead(tiltY) == 0) {
    digitalWrite(A2, 1);
  } else {
    digitalWrite(A2, 0);
  }
  Serial.print("Z: ");
  Serial.println(digitalRead(tiltZ));
  if (digitalRead(tiltZ) == 0) {
    digitalWrite(A4, 1);
  } else {
    digitalWrite(A4, 0);
  }
  delay(30);
}