Terminal Logs

gistfile1.txt

Recv: wait
Recv: wait
Send: N79 M105*25
Recv: ok 79
Recv: T:35.52 /0 B:36.49 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N80 M105*31
Recv: ok 80
Recv: T:35.31 /0 B:36.34 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N81 M105*30
Recv: ok 81
Recv: T:34.90 /0 B:36.13 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N82 M105*29
Recv: ok 82
Recv: T:34.69 /0 B:35.93 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N83 M105*28
Recv: ok 83
Recv: T:34.48 /0 B:35.72 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N84 M105*27
Recv: ok 84
Recv: T:34.28 /0 B:35.52 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N85 M105*26
Recv: ok 85
Recv: T:34.07 /0 B:35.31 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N86 M105*25
Recv: ok 86
Recv: T:33.87 /0 B:35.21 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N87 M105*24
Recv: ok 87
Recv: T:33.66 /0 B:35.10 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N88 M105*23
Recv: ok 88
Recv: T:33.45 /0 B:34.90 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N89 M105*22
Recv: ok 89
Recv: T:33.30 /0 B:34.69 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N90 M105*30
Recv: ok 90
Recv: T:33.25 /0 B:34.69 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
--- client too slow, log output disabled while printing ---
Changing monitoring state from 'Offline: See octoprint.log for details' to 'Operational'
Connection closed, closing down monitor
Connecting to: /dev/ttyUSB0
Changing monitoring state from 'Offline' to 'Opening serial port'
Connected to: Serial<id=0x6d290c10, open=True>(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from 'Opening serial port' to 'Connecting'
Send: N0 M110 N0*125
Recv: start
Send: N0 M110 N0*125
Recv: Info: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
Recv: Free RAM:10732
Recv: SD init fail
Recv: ok
Changing monitoring state from 'Connecting' to 'Operational'
Send: N0 M110 N0*125
Recv: ok
Send: N1 M115*39
Recv: ok 1
Send: N2 M21*18
Recv: FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
Recv: Printed filament:1339.51m Printing time:18 days 6 hours 25 min
Recv: ok 2
Send: N3 M115*37
Recv: SD init fail
Recv: ok 3
Send: N4 M21*20
Recv: FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
Recv: Printed filament:1339.51m Printing time:18 days 6 hours 25 min
Recv: ok 4
Send: N5 M20*20
Recv: SD init fail
Recv: ok 5
Send: N6 M115*32
Recv: Begin file list
Recv: End file list
Recv: ok 6
Recv: FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
Recv: Printed filament:1339.51m Printing time:18 days 6 hours 25 min
Send: N7 M105*32
Recv: ok 7
Recv: T:30.67 /0 B:33.25 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N8 M105*47
Recv: ok 8
Recv: T:30.57 /0 B:33.25 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N9 M105*46
Recv: ok 9
Recv: T:30.46 /0 B:33.09 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N10 M105*22
Recv: ok 10
Recv: T:30.36 /0 B:33.04 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N11 M105*23
Recv: ok 11
Recv: T:30.31 /0 B:33.04 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N12 M105*20
Recv: ok 12
Recv: T:30.15 /0 B:32.84 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N13 M105*21
Recv: ok 13
Recv: T:30.05 /0 B:32.84 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N14 M105*18
Recv: ok 14
Recv: T:29.93 /0 B:32.84 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N15 M105*19
Recv: ok 15
Recv: T:29.93 /0 B:32.63 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
--- client too slow, log output disabled while printing ---
Changing monitoring state from 'Printing' to 'Offline: See octoprint.log for details'
Changing monitoring state from 'Offline: See octoprint.log for details' to 'Operational'
Connection closed, closing down monitor
Connecting to: /dev/ttyUSB0
Changing monitoring state from 'Offline' to 'Opening serial port'
Connected to: Serial<id=0x6cdb2c70, open=True>(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from 'Opening serial port' to 'Connecting'
Send: N0 M110 N0*125
Recv: start
Send: N0 M110 N0*125
Recv: Info: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
Recv: Free RAM:10732
Recv: SD init fail
Recv: ok
Changing monitoring state from 'Connecting' to 'Operational'
Send: N0 M110 N0*125
Recv: ok
Send: N1 M115*39
Recv: ok 1
Send: N2 M21*18
Recv: FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
Recv: Printed filament:1339.51m Printing time:18 days 6 hours 25 min
Recv: ok 2
Send: N3 M21*19
Recv: SD init fail
Recv: ok 3
Send: N4 M20*21
Recv: SD init fail
Recv: ok 4
Send: N5 M115*35
Recv: Begin file list
Recv: End file list
Recv: ok 5
Send: N6 M115*32
Recv: FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
Recv: Printed filament:1339.51m Printing time:18 days 6 hours 25 min
Recv: ok 6
Recv: FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
Recv: Printed filament:1339.51m Printing time:18 days 6 hours 25 min
Send: N7 M105*32
Recv: ok 7
Recv: T:27.52 /0 B:31.19 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N8 M105*47
Recv: ok 8
Recv: T:27.52 /0 B:31.19 /0 B@:0 @:0
--- client too slow, log output disabled while printing ---
Changing monitoring state from 'Offline: See octoprint.log for details' to 'Operational'
Connection closed, closing down monitor
Connecting to: /dev/ttyUSB0
Changing monitoring state from 'Offline' to 'Opening serial port'
Connected to: Serial<id=0x6cd89d90, open=True>(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from 'Opening serial port' to 'Connecting'
Send: N0 M110 N0*125
Recv: start
Send: N0 M110 N0*125
Recv: Info: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
Recv: Free RAM:10732
Recv: SD init fail
Recv: ok
Changing monitoring state from 'Connecting' to 'Operational'
Send: N0 M110 N0*125
Recv: ok
Send: N1 M115*39
Recv: ok 1
Send: N2 M21*18
Recv: FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
Recv: Printed filament:1339.51m Printing time:18 days 6 hours 25 min
Recv: ok 2
Send: N3 M115*37
Recv: SD init fail
Recv: ok 3
Send: N4 M21*20
Recv: FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
Recv: Printed filament:1339.51m Printing time:18 days 6 hours 25 min
Recv: ok 4
Send: N5 M20*20
Recv: SD init fail
Recv: ok 5
Send: N6 M115*32
Recv: Begin file list
Recv: End file list
Recv: ok 6
Recv: FIRMWARE_NAME:Repetier_0.91 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:2
Recv: Printed filament:1339.51m Printing time:18 days 6 hours 25 min
Send: N7 M105*32
Recv: ok 7
Recv: T:25.64 /0 B:29.13 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N8 M105*47
Recv: ok 8
Recv: T:25.64 /0 B:29.13 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N9 M105*46
Recv: ok 9
Recv: T:25.64 /0 B:28.86 /0 B@:0 @:0
Recv: wait
Recv: wait
Recv: wait
Recv: wait
Send: N10 M105*22
Recv: wait
Recv: ok 10
Recv: T:25.64 /0 B:28.86 /0 B@:0 @:0
--- client too slow, log output disabled while printing ---