Created
November 18, 2024 23:32
-
-
Save aniket-l/328ad93ed60c2419ed7be9f85e6b6075 to your computer and use it in GitHub Desktop.
j7200-evm u-boot OPP_LOW v4 testing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2025.01-rc2-00111-g23bc2db79d85-dirty (Nov 19 2024 - 04:51:09 +0530) | |
| SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| No efuse found for opp_0 | |
| OPP_LOW: k3_avs_check_opp failed: -22 | |
| Trying to boot from DFU | |
| ####DOWNLOAD ... OK | |
| Ctrl+C to exit ... | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Loading Environment from nowhere... OK | |
| init_env from device 18 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.11.0(release):v2.11.0-dirty | |
| NOTICE: BL31: Built : 11:51:22, May 23 2024 | |
| I/TC: | |
| I/TC: OP-TEE version: 4.4.0-dev (gcc version 13.3.0 (GCC)) #1 Fri Oct 18 17:45:27 UTC 2024 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: GIC redistributor base address not provided | |
| I/TC: Assuming default GIC group status and modifier | |
| I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: HUK Initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2025.01-rc2-00111-g23bc2db79d85-dirty (Nov 19 2024 - 04:51:34 +0530) | |
| SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| Detected: J7X-BASE-CPB rev A | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Trying to boot from DFU | |
| cdns-ti cdns-usb@4104000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 | |
| cdns-usb3-peripheral usb@6000000: DRD version v1 (ID: 0004024e, rev: 00000200) | |
| cdns-usb3-peripheral usb@6000000: Initialized ep0 support: | |
| cdns-usb3-peripheral usb@6000000: Initialized ep1out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep2out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep3out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep4out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep5out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep6out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep7out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep8out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep9out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep10out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep11out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep12out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep13out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep14out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep15out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep1in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep2in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep3in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep4in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep5in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep6in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep7in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep8in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep9in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep10in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep11in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep12in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep13in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep14in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep15in support: BULK, INT ISO | |
| #####DOWNLOAD ... OK | |
| Ctrl+C to exit ... | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| U-Boot 2025.01-rc2-00111-g23bc2db79d85-dirty (Nov 19 2024 - 04:51:34 +0530) | |
| SoC: J7200 SR2.0 GP | |
| Model: Texas Instruments J7200 EVM | |
| Board: J7200X-PM2-SOM rev E8 | |
| DRAM: 4 GiB | |
| Core: 103 devices, 33 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 | |
| Detected: J7X-BASE-CPB rev A | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 0 | |
| => | |
| =>i2c bus | |
| Bus 0: i2c@42120000 (active 0) | |
| 51: generic_51, offset len 2, flags 0 | |
| 54: generic_54, offset len 2, flags 0 | |
| Bus 1: i2c@2000000 (active 1) | |
| 21: gpio@21, offset len 1, flags 0 | |
| 20: gpio@20, offset len 1, flags 0 | |
| 22: gpio@22, offset len 1, flags 0 | |
| Bus 2: i2c@2010000 | |
| 20: gpio@20, offset len 1, flags 0 | |
| =>i2c dev 0 | |
| Setting bus to 0 | |
| =>i2c md 0x4c 0xe | |
| 000e: 37 00 41 00 37 00 b2 00 00 00 12 12 12 12 00 00 7.A.7........... | |
| => | |
| =>boot | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| SD/MMC found on device 1 | |
| 574 bytes read in 2 ms (280.3 KiB/s) | |
| Loaded env from uEnv.txt | |
| Importing environment from mmc1 ... | |
| Scanning for bootflows in all bootdevs | |
| Seq Method State Uclass Part Name Filename | |
| --- ----------- ------ -------- ---- ------------------------ ---------------- | |
| Scanning global bootmeth 'efi_mgr': | |
| Cannot persist EFI variables without system partition | |
| 0 efi_mgr ready (none) 0 <NULL> | |
| ** Booting bootflow '<NULL>' with efi_mgr | |
| Booting: mmc 1 | |
| error: no such device: ((hd0,msdos1)/EFI/BOOT)/EFI/BOOT/grub.cfg. | |
| error: serial port `com0' isn't found. | |
| GNU GRUB version 2.12 | |
| ┌───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐││││││││││││││││││││││││││││││││││││││││││││││││││││││││││└───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Use the ▲ and ▼ keys to select which entry is highlighted. | |
| Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. *boot The highlighted entry will be executed automatically in 3s. The highlighted entry will be executed automatically in 2s. The highlighted entry will be executed automatically in 1s. The highlighted entry will be executed automatically in 0s. Booting `boot' | |
| EFI stub: Booting Linux Kernel... | |
| EFI stub: EFI_RNG_PROTOCOL unavailable | |
| EFI stub: Using DTB from configuration table | |
| EFI stub: Exiting boot services... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| I/TC: Reserved shared memory is enabled | |
| I/TC: Dynamic shared memory is enabled | |
| I/TC: Normal World virtualization support is disabled | |
| I/TC: Asynchronous notifications are disabled | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] | |
| [ 0.000000] Linux version 6.6.44-ti-01386-g126a8167b591-dirty (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP PREEMPT Wed Oct 30 19:49:32 UTC 2024 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J7200 EVM | |
| [ 0.000000] efi: EFI v2.10 by Das U-Boot | |
| [ 0.000000] efi: RTPROP=0xfce5c040 SMBIOS 3.0=0xfdeb8000 MEMRESERVE=0xfce36040 | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 | |
| [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a47fffff (8192 KiB) nomap non-reusable ipc-memories@a4000000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a47fffff] | |
| [ 0.000000] node 0: [mem 0x00000000a4800000-0x00000000fce5bfff] | |
| [ 0.000000] node 0: [mem 0x00000000fce5c000-0x00000000fce5cfff] | |
| [ 0.000000] node 0: [mem 0x00000000fce5d000-0x00000000fce5dfff] | |
| [ 0.000000] node 0: [mem 0x00000000fce5e000-0x00000000fce7ffff] | |
| [ 0.000000] node 0: [mem 0x00000000fce80000-0x00000000fdeb7fff] | |
| [ 0.000000] node 0: [mem 0x00000000fdeb8000-0x00000000fdeb8fff] | |
| [ 0.000000] node 0: [mem 0x00000000fdeb9000-0x00000000ffebffff] | |
| [ 0.000000] node 0: [mem 0x00000000ffec0000-0x00000000ffecffff] | |
| [ 0.000000] node 0: [mem 0x00000000ffed0000-0x00000000ffffffff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fae00000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.5 | |
| [ 0.000000] percpu: Embedded 20 pages/cpu s42920 r8192 d30808 u81920 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: Spectre-v3a | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: detected: ARM erratum 1742098 | |
| [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/Image root=PARTUUID=076c4a2a-02 rootwait rootfstype=ext4 | |
| [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/Image", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 | |
| [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 2. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000f2e00000-0x00000000f6e00000] (64MB) | |
| [ 0.000000] Memory: 3895816K/4194304K available (12032K kernel code, 1252K rwdata, 4040K rodata, 2432K init, 504K bss, 265720K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 960 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.000187] Console: colour dummy device 80x25 | |
| [ 0.000193] printk: console [tty0] enabled | |
| [ 0.000497] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.000507] pid_max: default: 32768 minimum: 301 | |
| [ 0.000553] LSM: initializing lsm=capability,integrity | |
| [ 0.000618] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.000641] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.001535] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.001588] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.001721] rcu: Hierarchical SRCU implementation. | |
| [ 0.001728] rcu: Max phase no-delay instances is 1000. | |
| [ 0.001908] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.002054] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.002218] Remapping and enabling EFI services. | |
| [ 0.002368] smp: Bringing up secondary CPUs ... | |
| [ 0.010905] Detected PIPT I-cache on CPU1 | |
| [ 0.010951] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 | |
| [ 0.010967] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 | |
| [ 0.010999] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] | |
| [ 0.011087] smp: Brought up 1 node, 2 CPUs | |
| [ 0.011111] SMP: Total of 2 processors activated. | |
| [ 0.011117] CPU features: detected: 32-bit EL0 Support | |
| [ 0.011122] CPU features: detected: CRC32 instructions | |
| [ 0.011210] CPU: All CPU(s) started at EL2 | |
| [ 0.011218] alternatives: applying system-wide alternatives | |
| [ 0.012118] devtmpfs: initialized | |
| [ 0.017834] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.017860] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| [ 0.018496] pinctrl core: initialized pinctrl subsystem | |
| [ 0.018778] SMBIOS 3.7.0 present. | |
| [ 0.018795] DMI: ti Texas Instruments J7200 EVM/Texas Instruments J7200 EVM, BIOS 2025.01-rc2-00111-g23bc2db79d85-dirty 01/01/2025 | |
| [ 0.019168] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.019695] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.019806] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.019933] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.019997] audit: initializing netlink subsys (disabled) | |
| [ 0.020105] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.020309] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.020314] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.020339] cpuidle: using governor menu | |
| [ 0.020424] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.020459] ASID allocator initialised with 65536 entries | |
| [ 0.029995] Modules: 27664 pages in range for non-PLT usage | |
| [ 0.030002] Modules: 519184 pages in range for PLT usage | |
| [ 0.030456] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.030470] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.030476] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.030481] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.030486] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.030491] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.030496] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.030500] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.031279] k3-chipinfo 43000014.chipid: Family:J7200 rev:SR2.0 JTAGID[0x1bb6d02f] Detected | |
| [ 0.031691] iommu: Default domain type: Translated | |
| [ 0.031702] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.031844] SCSI subsystem initialized | |
| [ 0.032057] usbcore: registered new interface driver usbfs | |
| [ 0.032075] usbcore: registered new interface driver hub | |
| [ 0.032096] usbcore: registered new device driver usb | |
| [ 0.032348] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.032354] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.032364] PTP clock support registered | |
| [ 0.032466] EDAC MC: Ver: 3.0.0 | |
| [ 0.032737] scmi_core: SCMI protocol bus registered | |
| [ 0.032774] efivars: Registered efivars operations | |
| [ 0.032970] FPGA manager framework | |
| [ 0.033020] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.033440] vgaarb: loaded | |
| [ 0.033611] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.033739] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.033758] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.036892] NET: Registered PF_INET protocol family | |
| [ 0.037193] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.038788] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
| [ 0.038829] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.038846] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.038992] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| [ 0.040172] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.040345] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.040416] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.040559] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.040904] RPC: Registered named UNIX socket transport module. | |
| [ 0.040916] RPC: Registered udp transport module. | |
| [ 0.040920] RPC: Registered tcp transport module. | |
| [ 0.040924] RPC: Registered tcp-with-tls transport module. | |
| [ 0.040928] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.040937] NET: Registered PF_XDP protocol family | |
| [ 0.040954] PCI: CLS 0 bytes, default 64 | |
| [ 0.041644] Initialise system trusted keyrings | |
| [ 0.041765] workingset: timestamp_bits=46 max_order=20 bucket_order=0 | |
| [ 0.041943] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.042101] NFS: Registering the id_resolver key type | |
| [ 0.042126] Key type id_resolver registered | |
| [ 0.042130] Key type id_legacy registered | |
| [ 0.042144] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.042150] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.055701] Key type asymmetric registered | |
| [ 0.055710] Asymmetric key parser 'x509' registered | |
| [ 0.055745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
| [ 0.055753] io scheduler mq-deadline registered | |
| [ 0.055759] io scheduler kyber registered | |
| [ 0.055785] io scheduler bfq registered | |
| [ 0.057592] pinctrl-single 4301c000.pinctrl: 13 pins, size 52 | |
| [ 0.057751] pinctrl-single 4301c038.pinctrl: 2 pins, size 8 | |
| [ 0.057842] pinctrl-single 4301c068.pinctrl: 59 pins, size 236 | |
| [ 0.058105] pinctrl-single 4301c174.pinctrl: 8 pins, size 32 | |
| [ 0.058250] pinctrl-single 104200.pinctrl: 20 pins, size 80 | |
| [ 0.058312] pinctrl-single 104280.pinctrl: 8 pins, size 32 | |
| [ 0.058411] pinctrl-single 11c000.pinctrl: 67 pins, size 268 | |
| [ 0.058678] pinctrl-single 11c11c.pinctrl: 3 pins, size 12 | |
| [ 0.062191] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled | |
| [ 0.067403] loop: module loaded | |
| [ 0.068020] megasas: 07.725.01.00-rc1 | |
| [ 0.069907] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.070462] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.071066] usbcore: registered new interface driver usb-storage | |
| [ 0.071413] i2c_dev: i2c /dev entries driver | |
| [ 0.072047] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.072055] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.072179] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.072500] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.072737] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 0.073204] usbcore: registered new interface driver usbhid | |
| [ 0.073211] usbhid: USB HID core driver | |
| [ 0.073984] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
| [ 0.074252] optee: probing for conduit method. | |
| [ 0.074271] optee: revision 4.4 (8f645256efc0dc66) | |
| [ 0.090747] optee: dynamic shared memory is enabled | |
| [ 0.091190] random: crng init done | |
| [ 0.091255] optee: initialized driver | |
| [ 0.092523] NET: Registered PF_PACKET protocol family | |
| [ 0.092575] Key type dns_resolver registered | |
| [ 0.096164] registered taskstats version 1 | |
| [ 0.096383] Loading compiled-in X.509 certificates | |
| [ 0.103987] ti-sci 44083000.system-controller: ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| [ 0.175111] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 0.176043] pca953x 1-0021: supply vcc not found, using dummy regulator | |
| [ 0.176121] pca953x 1-0021: using no AI | |
| [ 0.198047] pca953x 1-0020: supply vcc not found, using dummy regulator | |
| [ 0.198099] pca953x 1-0020: using no AI | |
| [ 0.198742] pca953x 1-0022: supply vcc not found, using dummy regulator | |
| [ 0.198800] pca953x 1-0022: using AI | |
| [ 0.199426] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz | |
| [ 0.199990] pca953x 2-0020: supply vcc not found, using dummy regulator | |
| [ 0.200063] pca953x 2-0020: using no AI | |
| [ 0.213936] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz | |
| [ 0.214065] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created | |
| [ 0.214153] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created | |
| [ 0.214241] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created | |
| [ 0.214386] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 209 created | |
| [ 0.217301] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,32] sci-dev-id:235 | |
| [ 0.217320] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 0.217327] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 0.220393] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[120,200] sci-dev-id:211 | |
| [ 0.220413] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 0.220419] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 0.221123] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 271, base_baud = 6000000) is a 8250 | |
| [ 0.221798] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 272, base_baud = 3000000) is a 8250 | |
| [ 0.221840] printk: console [ttyS2] enabled | |
| [ 1.858866] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 273, base_baud = 3000000) is a 8250 | |
| [ 1.868155] 2830000.serial: ttyS5 at MMIO 0x2830000 (irq = 274, base_baud = 3000000) is a 8250 | |
| [ 1.877250] cadence-qspi 47040000.spi: couldn't determine phase-detect-selector | |
| [ 1.885322] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.929615] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.939580] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.947866] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 1.960796] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.968011] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.974284] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:0 | |
| [ 1.984665] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0 | |
| [ 1.993743] mmc0: CQHCI version 5.10 | |
| [ 2.034175] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit | |
| [ 2.128972] mmc0: Command Queue Engine enabled | |
| [ 2.133437] mmc0: new HS400 MMC card at address 0001 | |
| [ 2.138836] mmcblk0: mmc0:0001 S0J56X 14.8 GiB | |
| [ 2.144777] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB | |
| [ 2.150561] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB | |
| [ 2.156385] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (239:0) | |
| [ 2.293468] tps6594-rtc tps6594-rtc.4.auto: registered as rtc0 | |
| [ 2.299440] tps6594-rtc tps6594-rtc.4.auto: hctosys: unable to read the hardware clock | |
| [ 2.336537] vdd_core_0v85: Bringing 800000uV into 850000-850000uV | |
| [ 2.450665] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges: | |
| [ 2.458180] j721e-pcie 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0x0018001000 | |
| [ 2.466268] j721e-pcie 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0x0018011000 | |
| [ 2.474352] j721e-pcie 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000 | |
| [ 3.484783] j721e-pcie 2910000.pcie: PCI host bridge to bus 0000:00 | |
| [ 3.491071] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 3.496551] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x18001000-0x18010fff]) | |
| [ 3.506015] pci_bus 0000:00: root bus resource [mem 0x18011000-0x1fffffff] | |
| [ 3.512898] pci 0000:00:00.0: [104c:b00f] type 01 class 0x060400 | |
| [ 3.518993] pci 0000:00:00.0: supports D1 | |
| [ 3.522997] pci 0000:00:00.0: PME# supported from D0 D1 D3hot | |
| [ 3.528752] pci 0000:00:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit] | |
| [ 3.535615] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 64bit] (contains BAR0 for 4 VFs) | |
| [ 3.546924] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 3.555029] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 3.561648] pci 0000:00:00.0: BAR 7: assigned [mem 0x18400000-0x193fffff 64bit] | |
| [ 3.568948] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 3.573972] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 | |
| [ 3.580758] pcieport 0000:00:00.0: PME: Signaling with IRQ 618 | |
| [ 3.586775] pcieport 0000:00:00.0: AER: enabled with IRQ 618 | |
| [ 3.593301] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) | |
| [ 3.603544] ti-udma 31150000.dma-controller: Channels: 50 (tchan: 25, rchan: 25, gp-rflow: 8) | |
| [ 3.613417] cadence-qspi 47040000.spi: couldn't determine phase-detect-selector | |
| [ 3.623489] spi-nor spi0.0: s28hs512t (65536 Kbytes) | |
| [ 3.628506] 7 fixed-partitions partitions found on MTD device 47040000.spi.0 | |
| [ 3.635593] Creating 7 MTD partitions on "47040000.spi.0": | |
| [ 3.641080] 0x000000000000-0x000000100000 : "ospi.tiboot3" | |
| [ 3.647186] 0x000000100000-0x000000300000 : "ospi.tispl" | |
| [ 3.653015] 0x000000300000-0x000000700000 : "ospi.u-boot" | |
| [ 3.658896] 0x000000700000-0x000000740000 : "ospi.env" | |
| [ 3.664491] 0x000000740000-0x000000780000 : "ospi.env.backup" | |
| [ 3.670717] 0x000000800000-0x000003fc0000 : "ospi.rootfs" | |
| [ 3.676578] 0x000003fc0000-0x000004000000 : "ospi.phypattern" | |
| [ 3.682814] cadence-qspi 47040000.spi: Phase Detect Selector should be in between [0, 7]. Skipping Calibration | |
| [ 3.693361] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 3.737614] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 3.747590] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 3.755872] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 3.768743] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 3.775956] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 3.782198] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:0 | |
| [ 3.798220] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 | |
| [ 3.809207] mmc1: CQHCI version 5.10 | |
| [ 3.810697] clk: Disabling unused clocks | |
| [ 3.829807] ALSA device list: | |
| [ 3.832773] No soundcards found. | |
| [ 3.852211] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit | |
| [ 3.859802] Waiting for root device PARTUUID=076c4a2a-02... | |
| [ 3.914782] mmc1: new ultra high speed SDR104 SDHC card at address aaaa | |
| [ 3.921814] mmcblk1: mmc1:aaaa SL32G 29.7 GiB | |
| [ 3.930693] mmcblk1: p1 p2 | |
| [ 3.948356] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem | |
| [ 3.955669] EXT4-fs (mmcblk1p2): write access will be enabled during recovery | |
| [ 4.159334] EXT4-fs (mmcblk1p2): orphan cleanup on readonly fs | |
| [ 4.166282] EXT4-fs (mmcblk1p2): recovery complete | |
| [ 4.177076] EXT4-fs (mmcblk1p2): mounted filesystem 7299f552-401b-49f4-9d51-e89833d59903 ro with ordered data mode. Quota mode: none. | |
| [ 4.189111] VFS: Mounted root (ext4 filesystem) readonly on device 179:98. | |
| [ 4.199409] devtmpfs: mounted | |
| [ 4.203876] Freeing unused kernel memory: 2432K | |
| [ 4.208515] Run /sbin/init as init process | |
| [ 4.394431] systemd[1]: System time before build time, advancing clock. | |
| [ 4.432454] NET: Registered PF_INET6 protocol family | |
| [ 4.438016] Segment Routing with IPv6 | |
| [ 4.441699] In-situ OAM (IOAM) with IPv6 | |
| [ 4.473505] systemd[1]: systemd 255.4^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
| [ 4.505302] systemd[1]: Detected architecture arm64. | |
| Welcome to Arago 2023.10! | |
| [ 4.529751] systemd[1]: Hostname set to <j7200-evm>. | |
| [ 4.741791] systemd[1]: /usr/lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 4.809635] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 4.862429] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 4.900661] systemd[1]: Created slice Slice /system/getty. | |
| [ OK ] Created slice Slice /system/getty. | |
| [ 4.922850] systemd[1]: Created slice Slice /system/modprobe. | |
| [ OK ] Created slice Slice /system/modprobe. | |
| [ 4.946749] systemd[1]: Created slice Slice /system/serial-getty. | |
| [ OK ] Created slice Slice /system/serial-getty. | |
| [ 4.970522] systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| [ 4.993848] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ OK ] Started Dispatch Password Requests to Console Directory Watch. | |
| [ 5.017772] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Started Forward Password Requests to Wall Directory Watch. | |
| [ 5.041699] systemd[1]: Expecting device /dev/ttyS2... | |
| Expecting device /dev/ttyS2... | |
| [ 5.057722] systemd[1]: Reached target Path Units. | |
| [ OK ] Reached target Path Units. | |
| [ 5.073678] systemd[1]: Reached target Remote File Systems. | |
| [ OK ] Reached target Remote File Systems. | |
| [ 5.093676] systemd[1]: Reached target Slice Units. | |
| [ OK ] Reached target Slice Units. | |
| [ 5.109677] systemd[1]: Reached target Swaps. | |
| [ OK ] Reached target Swaps. | |
| [ 5.148487] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [ OK ] Listening on RPCbind Server Activation Socket. | |
| [ 5.173813] systemd[1]: Reached target RPC Port Mapper. | |
| [ OK ] Reached target RPC Port Mapper. | |
| [ 5.199199] systemd[1]: Listening on Process Core Dump Socket. | |
| [ OK ] Listening on Process Core Dump Socket. | |
| [ 5.221890] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [ OK ] Listening on initctl Compatibility Named Pipe. | |
| [ 5.246270] systemd[1]: Listening on Journal Audit Socket. | |
| [ OK ] Listening on Journal Audit Socket. | |
| [ 5.270008] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| [ 5.290024] systemd[1]: Listening on Journal Socket. | |
| [ OK ] Listening on Journal Socket. | |
| [ 5.310045] systemd[1]: Listening on Network Service Netlink Socket. | |
| [ OK ] Listening on Network Service Netlink Socket. | |
| [ 5.339175] systemd[1]: Listening on udev Control Socket. | |
| [ OK ] Listening on udev Control Socket. | |
| [ 5.361953] systemd[1]: Listening on udev Kernel Socket. | |
| [ OK ] Listening on udev Kernel Socket. | |
| [ 5.381944] systemd[1]: Listening on User Database Manager Socket. | |
| [ OK ] Listening on User Database Manager Socket. | |
| [ 5.429826] systemd[1]: Mounting Huge Pages File System... | |
| Mounting Huge Pages File System... | |
| [ 5.451840] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting POSIX Message Queue File System... | |
| [ 5.489077] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting Kernel Debug File System... | |
| [ 5.505951] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). | |
| [ 5.523754] systemd[1]: Mounting Temporary Directory /tmp... | |
| Mounting Temporary Directory /tmp... | |
| [ 5.565504] systemd[1]: Starting Create List of Static Device Nodes... | |
| Starting Create List of Static Device Nodes 5.574615] systemd[1]: Starting Load Kernel Module configfs... | |
| m... | |
| Starting Load Kernel Module configfs... | |
| [ 5.607992] systemd[1]: Starting Load Kernel Module drm... | |
| Starting Load Kernel Module drm... | |
| [ 5.630284] systemd[1]: Starting Load Kernel Module fuse... | |
| Starting Load Kernel Module fuse... | |
| [ 5.671030] systemd[1]: Starting RPC Bind... | |
| Starting RPC Bind... | |
| [ 5.680740] fuse: init (API version 7.39) | |
| [ 5.696279] systemd[1]: Starting File System Check on Root Device... | |
| Starting File System Check on Root Device... | |
| [ 5.722091] systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| [ 5.742101] systemd[1]: Starting Load Kernel Modules... | |
| Starting Load Kernel Modules... | |
| [ 5.758277] systemd[1]: Starting Generate network units from Kernel command line... | |
| Starting Generate network units from Kernel command line... | |
| [ 5.777153] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting Coldplug All udev Devices... | |
| [ 5.792040] systemd[1]: Started RPC Bind. | |
| [ OK ] Started RPC Bind. | |
| [ 5.802760] systemd[1]: Mounted Huge Pages File System. | |
| [ OK ] Mounted Huge Pages File System.[ 5.812685] systemd[1]: Mounted POSIX Message Queue File System. | |
| [ 5.814356] systemd-journald[111]: Collecting audit messages is enabled. | |
| [ OK ] Mounted POSIX Message Queue File Sy[ 5.832117] systemd[1]: Mounted Kernel Debug File System. | |
| stem. | |
| [ 5.836783] cryptodev: loading out-of-tree module taints kernel. | |
| [ OK ] Mounted Kernel Debug File System 5.849895] cryptodev: driver 1.14 loaded. | |
| m. | |
| [ 5.852345] systemd[1]: Mounted Temporary Directory /tmp. | |
| [ OK ] Mounted Temporary Directory /tmp. | |
| [ 5.876887] systemd[1]: Finished Create List of Static Device Nodes. | |
| [ OK ] Finished Create List of Static Devi[ 5.888836] systemd[1]: modprobe@configfs.service: Deactivated successfully. | |
| ce Nodes. | |
| [ 5.901078] systemd[1]: Finished Load Kernel Module configfs. | |
| [ OK ] Finished Load Kernel Module configf[ 5.907627] systemd[1]: Started Journal Service. | |
| s. | |
| [ OK ] Started Journal Service. | |
| [ OK ] Finished Load Kernel Module drm. | |
| [ OK ] Finished Load Kernel Module fuse. | |
| [ OK ] Finished Load Kernel Modules. | |
| [ OK ] Finished Generate network units from Kernel command line. | |
| [ OK ] Finished File System Check on Root Device. | |
| Mounting FUSE Control File System... | |
| Mounting Kernel Configuration File System... | |
| Starting Remount Root and Kernel File Systems... | |
| Starting Apply Kernel Variables... | |
| Starting Create Static Device Nodes in /dev gracefully... | |
| [ 6.141145] EXT4-fs (mmcblk1p2): re-mounted 7299f552-401b-49f4-9d51-e89833d59903 r/w. Quota mode: none. | |
| [ OK ] Mounted FUSE Control File System. | |
| [ OK ] Mounted Kernel Configuration File System. | |
| [ OK ] Finished Remount Root and Kernel File Systems. | |
| Starting Flush Journal to Persistent Storage... | |
| [ OK ] Finished Apply Kernel Variables[ 6.251744] systemd-journald[111]: Received client request to flush runtime journal. | |
| . | |
| [ OK ] Finished Create Static Device Nodes in /dev gracefully. | |
| [ OK ] Finished Flush Journal to Persistent Storage. | |
| Starting Create Static Device Nodes in /dev... | |
| [ OK ] Finished Coldplug All udev Devices. | |
| [ OK ] Finished Create Static Device Nodes in /dev. | |
| [ OK ] Reached target Preparation for Local File Systems. | |
| Mounting /var/volatile... | |
| [ 6.423124] audit: type=1334 audit(1709054766.024:2): prog-id=6 op=LOAD | |
| [ 6.430121] audit: type=1334 audit(1709054766.032:3): prog-id=7 op=LOAD | |
| Starting Rule-based Manager for Device Events and Files... | |
| [ OK ] Mounted /var/volatile. | |
| Starting Load/Save OS Random Seed... | |
| [ OK ] Reached target Local File Systems. | |
| Starting Create Volatile Files and Directories... | |
| [ OK ] Finished Load/Save OS Random Seed. | |
| [ 6.572966] audit: type=1334 audit(1709054766.172:4): prog-id=8 op=LOAD | |
| [ 6.579718] audit: type=1334 audit(1709054766.172:5): prog-id=9 op=LOAD | |
| [ 6.586436] audit: type=1334 audit(1709054766.172:6): prog-id=10 op=LOAD | |
| Starting User Database Manager... | |
| [ OK ] Finished Create Volatile Files and Directories. | |
| [ 6.637679] audit: type=1334 audit(1709054766.236:7): prog-id=11 op=LOAD | |
| Starting Network Name Resolution... | |
| [ 6.676047] audit: type=1334 audit(1709054766.276:8): prog-id=12 op=LOAD | |
| Starting Network Time Synchronization... | |
| Starting Record System Boot/Shutdown in UTMP... | |
| [ OK ] Started User Database Manager. | |
| [ OK ] Finished Record System Boot/Shutdown in UTMP. | |
| [ OK ] Started Rule-based Manager for Device Events and Files. | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Reached target Host and Network Name Lookups. | |
| [ OK ] Started Network Time Synchronization. | |
| [ OK ] Found device /dev/ttyS2. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Reached target System Time Set. | |
| [ OK ] Started Daily rotation of log files. | |
| [ OK ] Reached target Timer Units. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| Starting Docker Socket for the API... | |
| [ OK ] Listening on dropbear.socket. | |
| [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. | |
| Starting Weston socket... | |
| [ 7.310925] audit: type=1334 audit(1709248329.552:9): prog-id=13 op=LOAD | |
| Starting D-Bus System Message Bus... | |
| Starting Reboot and dump vmcore via kexec... | |
| [ OK ] Listening on Docker Socket for the API. | |
| [ OK ] Listening on Weston socket. | |
| [ OK ] Started D-Bus System Message Bus. | |
| [ OK ] Finished Reboot and dump vmcore via kexec. | |
| [ 7.454025] dbus-broker-lau[301]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set | |
| [ OK ] Reached target Socket Units. | |
| [ OK ] Reached target Basic System. | |
| [ OK ] Started Job spooling tools. | |
| Starting Avahi mDNS/DNS-SD Stack... | |
| [ OK ] Started Periodic Command Scheduler. | |
| Starting Print notice about GPLv3 packages... | |
| Starting IPv6 Packet Filtering Framework... | |
| Starting IPv4 Packet Filtering Framework... | |
| [ OK ] Started irqbalance daemon. | |
| [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. | |
| [ 7.779416] audit: type=1334 audit(1709248330.020:10): prog-id=14 op=LOAD | |
| [ 7.793729] audit: type=1334 audit(1709248330.036:11): prog-id=15 op=LOAD | |
| Starting User Login Management... | |
| Starting Telnet Server... | |
| [ OK ] Finished IPv6 Packet Filtering Framework. | |
| [ OK ] Finished IPv4 Packet Filtering Framework. | |
| [ OK ] Finished Telnet Server. | |
| [ OK ] Reached target Preparation for Network. | |
| Starting Network Configuration... | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| [ OK ] Started User Login Management. | |
| [ 8.203308] CAN device driver interface | |
| [ 8.230713] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 8.249728] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 8.258695] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' | |
| [ 8.343614] ti-udma 285c0000.dma-controller: chan1: is running! | |
| [ OK ] Started Network Configuration. | |
| [ OK ] Reached target Network. | |
| [ 8.403963] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 8.422667] at24 0-0050: supply vcc not found, using dummy regulator | |
| [ 8.429332] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| [ 8.462888] m_can_platform 2701000.can: m_can device registered (irq=709, version=32) | |
| Starting Enable and configure wl18xx bluetooth stack... | |
| [ 8.481095] m_can_platform 40528000.can: m_can device registered (irq=711, version=32) | |
| [ 8.499872] m_can_platform 40568000.can: m_can device registered (irq=712, version=32) | |
| [ 8.508528] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
| Starting containerd container runtime... | |
| [ 8.535681] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc8900 | |
| [ 8.547683] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc8900 | |
| Starting LLDP daemon... | |
| [ OK ] Started Netperf Benchmark Server. | |
| Starting Permit User Sessions... | |
| [ OK ] Finished Enable and configure wl18xx bluetooth stack. | |
| [ OK ] Finished Permit User Sessions. | |
| [ OK ] Started Getty on tty1. | |
| [ OK ] Started Serial Getty on ttyS2. | |
| [ OK ] Reached target Login Prompts. | |
| Starting Synchronize System and HW clocks.[ 8.757961] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) | |
| .. | |
| Starting Weston, a Wayland compositor, as a system service... | |
| [ 8.795315] platform 41000000.r5f: configured R5F for IPC-only mode | |
| [ 8.807866] platform 41000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000 | |
| [ 8.818593] gpio-mux mux-controller: 2-way mux-controller registered | |
| [ 8.828290] remoteproc remoteproc0: 41000000.r5f is available | |
| [ 8.834774] remoteproc remoteproc0: attaching to 41000000.r5f | |
| [ 8.842069] m_can_platform 2731000.can: m_can device registered (irq=715, version=32) | |
| [ 8.844055] rproc-virtio rproc-virtio.11.auto: assigned reserved memory node r5f-dma-memory@a0000000 | |
| [ 8.859694] virtio_rpmsg_bus virtio0: rpmsg host is online | |
| [ 8.865400] rproc-virtio rproc-virtio.11.auto: registered virtio0 (type 7) | |
| [ 8.872391] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd | |
| [ 8.880096] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe | |
| [ 8.888886] remoteproc remoteproc0: remote processor 41000000.r5f is now attached | |
| [ OK ] Started LLDP daemon. | |
| [ 8.928622] platform 5c00000.r5f: configured R5F for remoteproc mode | |
| [ 8.954732] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memory@a2000000 | |
| [ 8.997049] remoteproc remoteproc1: 5c00000.r5f is available | |
| [ 9.026105] remoteproc remoteproc1: powering up 5c00000.r5f | |
| [ 9.031931] remoteproc remoteproc1: Booting fw image j7200-main-r5f0_0-fw, size 75448 | |
| [ 9.041665] rproc-virtio rproc-virtio.12.auto: assigned reserved memory node r5f-dma-memory@a2000000 | |
| [ 9.053479] virtio_rpmsg_bus virtio1: rpmsg host is online | |
| [ 9.060413] rproc-virtio rproc-virtio.12.auto: registered virtio1 (type 7) | |
| [ 9.067463] remoteproc remoteproc1: remote processor 5c00000.r5f is now up | |
| [ OK ] Created slice Slice /system/tee-supplicant. | |
| [ OK ] Started TEE Supplicant on teepriv0. | |
| [ OK ] Created slice User Slice of UID 1000. | |
| Starting User Runtime Directory /run/user/1000... | |
| [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. | |
| [ OK ] Finished User Runtime Directory /run/user/1000. | |
| Starting User Manager for UID 1000... | |
| [ 9.270860] m_can_platform 2701000.can main_mcan0: renamed from can0 | |
| [ OK ] Reached target Hardware activated USB gadget. | |
| Starting Virtual Console Setup... | |
| [ 9.401249] m_can_platform 40528000.can mcu_mcan0: renamed from can1 | |
| [ 9.478767] m_can_platform 40568000.can mcu_mcan1: renamed from can2 | |
| [ 9.519530] m_can_platform 2731000.can main_mcan3: renamed from can3 | |
| [ OK ] Finished Virtual Console Setup. | |
| [ OK ] Finished Synchronize System and HW clocks. | |
| [ OK ] Started User Manager for UID 1000. | |
| [ OK ] Started Session c1 of User weston. | |
| [ OK ] Created slice Slice /system/systemd-fsck. | |
| Expecting device /dev/mmcblk1p1... | |
| [ OK ] Found device /dev/mmcblk1p1. | |
| Starting File System Check on /dev/mmcblk1p1... | |
| [FAILED] Failed to start Weston, a Wayland compositor, as a system service. | |
| See 'systemctl status weston.service' for details. | |
| [ OK ] Finished File System Check on /dev/mmcblk1p1. | |
| Mounting /run/media/boot-mmcblk1p1... | |
| [ OK ] Mounted /run/media/boot-mmcblk1p1. | |
| [ OK ] Started containerd container runtime. | |
| *************************************************************** | |
| *************************************************************** | |
| NOTICE: This file system contains the following GPL-3.0 packages: | |
| adwaita-icon-theme-symbolic | |
| autoconf | |
| bash | |
| bc | |
| binutils | |
| cifs-utils | |
| coreutils-stdbuf | |
| coreutils | |
| cpio | |
| cpp-symlinks | |
| cpp | |
| dosfstools | |
| elfutils | |
| findutils | |
| g++-symlinks | |
| g++ | |
| gawk | |
| gcc-symlinks | |
| gcc | |
| gdb | |
| gdbserver | |
| gettext | |
| glmark2 | |
| gnu-config | |
| grub-common | |
| grub-editenv | |
| grub-efi | |
| gzip | |
| kbd-keymaps-pine | |
| less | |
| libasm1 | |
| libatomic-dev | |
| libatomic1 | |
| libbfd | |
| libdebuginfod1 | |
| libdw1 | |
| libelf1 | |
| libgcc-s-dev | |
| libgcc1 | |
| libgdbm-compat4 | |
| libgdbm6 | |
| libgettextlib | |
| libgettextsrc | |
| libgmp10 | |
| libidn2-0 | |
| libmpc3 | |
| libmpfr6 | |
| libopcodes | |
| libqt5charts-examples | |
| libqt5charts-plugins | |
| libqt5charts-qmlplugins | |
| libqt5charts5 | |
| libqt5serialport-examples | |
| libqt5serialport-plugins | |
| libqt5serialport-qmlplugins | |
| libqt5serialport5 | |
| libqt5svg-examples | |
| libqt5svg-plugins | |
| libqt5svg-qmlplugins | |
| libqt5svg5 | |
| libqt5virtualkeyboard-plugins | |
| libqt5virtualkeyboard-qmlplugins | |
| libqt5virtualkeyboard5 | |
| libreadline8 | |
| libstdc++-dev | |
| libstdc++6 | |
| libunistring5 | |
| m4 | |
| make | |
| nettle | |
| parted | |
| piglit | |
| qt3d-plugins | |
| qt3d-qmlplugins | |
| qt3d | |
| qtbase-examples | |
| qtbase-plugins | |
| qtbase-qmlplugins | |
| qtbase | |
| qtconnectivity-plugins | |
| qtconnectivity-qmlplugins | |
| qtconnectivity | |
| qtdeclarative-plugins | |
| qtdeclarative-qmlplugins | |
| qtdeclarative-tools | |
| qtdeclarative | |
| qtgraphicaleffects-qmlplugins | |
| qtlocation-examples | |
| qtlocation-plugins | |
| qtlocation-qmlplugins | |
| qtlocation | |
| qtmultimedia-examples | |
| qtmultimedia-plugins | |
| qtmultimedia-qmlplugins | |
| qtmultimedia | |
| qtquics-qmlplugins.control | |
| qtquics2-plugins.control | |
| qtquics2-qmlplugins.control | |
| qtquics2.control | |
| qtscript-examples | |
| qtscript-plugins | |
| qtscript-qmlplugins | |
| qtscript | |
| qtwayland-examples | |
| qtwayland-plugins | |
| qtwayland-qmlplugins | |
| qtwayland | |
| tar | |
| which | |
| If you do not wish to distribute GPL-3.0 components please remove | |
| the above packages prior to distribution. This can be done using | |
| the opkg remove command. i.e.: | |
| opkg remove <package> | |
| Where <package> is the name printed in the list above | |
| NOTE: If the package is a dependency of another package you | |
| will be notified of the dependent packages. You should | |
| use the --force-removal-of-dependent-packages option to | |
| also remove the dependent packages as well | |
| *************************************************************** | |
| *************************************************************** | |
| [ OK ] Finished Print notice about GPLv3 packages. | |
| [ OK ] Reached target Multi-User System. | |
| [ OK ] Reached target Graphical Interface. | |
| Starting Record Runlevel Change in UTMP... | |
| [ OK ] Finished Record Runlevel Change in UTMP. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project j7200-evm ttyS2 | |
| Arago 2023.10 j7200-evm ttyS2 | |
| j7200-evm login:root | |
| [ 12.954000] kauditd_printk_skb: 8 callbacks suppressed | |
| [ 12.954006] audit: type=1006 audit(1709248335.196:16): pid=913 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 | |
| [ 12.972033] audit: type=1300 audit(1709248335.196:16): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe14cc128 a2=1 a3=1 items=0 ppid=1 pid=913 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd-executor" key=(null) | |
| [ 12.998756] audit: type=1327 audit(1709248335.196:16): proctitle="(systemd)" | |
| [ 13.006065] audit: type=1334 audit(1709248335.212:17): prog-id=18 op=LOAD | |
| [ 13.013120] audit: type=1300 audit(1709248335.212:17): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffffbb85298 a2=90 a3=0 items=0 ppid=1 pid=913 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" key=(null) | |
| [ 13.039158] audit: type=1327 audit(1709248335.212:17): proctitle="(systemd)" | |
| [ 13.046527] audit: type=1334 audit(1709248335.212:18): prog-id=18 op=UNLOAD | |
| [ 13.053838] audit: type=1300 audit(1709248335.212:18): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=1 a2=0 a3=ffff852a6c60 items=0 ppid=1 pid=913 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" key=(null) | |
| [ 13.079627] audit: type=1327 audit(1709248335.212:18): proctitle="(systemd)" | |
| [ 13.086853] audit: type=1334 audit(1709248335.212:19): prog-id=19 op=LOAD | |
| root@j7200-evm:~#uname -a | |
| Linux j7200-evm 6.6.44-ti-01386-g126a8167b591-dirty # | |
| root@j7200-evm:~# | |
| root@j7200-evm:~#k3conf dump clock 202 | |
| |------------------------------------------------------------------------------| | |
| | VERSION INFO | | |
| |------------------------------------------------------------------------------| | |
| | K3CONF | (version 0.3-nogit built Thu Jul 25 14:13:02 UTC 2024) | | |
| | SoC | J7200 SR2.0 | | |
| | SYSFW | ABI: 4.0 (firmware version 0x000a '10.1.6--v10.01.06 (Fiery Fox))') | | |
| |------------------------------------------------------------------------------| | |
| |-------------------------------------------------------------------------------------------| | |
| | Device ID | Clock ID | Clock Name | Status | Clock Frequency | | |
| |-------------------------------------------------------------------------------------------| | |
| | 202 | 2 | DEV_A72SS0_CORE0_0_ARM_CLK_CLK | CLK_STATE_READY | 2000000000 | | |
| |-------------------------------------------------------------------------------------------| | |
| root@j7200-evm:~#k3conf dump clock 4 | |
| |------------------------------------------------------------------------------| | |
| | VERSION INFO | | |
| |------------------------------------------------------------------------------| | |
| | K3CONF | (version 0.3-nogit built Thu Jul 25 14:13:02 UTC 2024) | | |
| | SoC | J7200 SR2.0 | | |
| | SYSFW | ABI: 4.0 (firmware version 0x000a '10.1.6--v10.01.06 (Fiery Fox))') | | |
| |------------------------------------------------------------------------------| | |
| |------------------------------------------------------------------------------------------| | |
| | Device ID | Clock ID | Clock Name | Status | Clock Frequency | | |
| |------------------------------------------------------------------------------------------| | |
| | 4 | 0 | DEV_A72SS0_CORE0_ARM_CLK_CLK | CLK_STATE_READY | 2000000000 | | |
| | 4 | 1 | DEV_A72SS0_CORE0_MSMC_CLK | CLK_STATE_READY | 1000000000 | | |
| | 4 | 2 | DEV_A72SS0_CORE0_PLL_CTRL_CLK | CLK_STATE_READY | 500000000 | | |
| |------------------------------------------------------------------------------------------| | |
| root@j7200-evm:~# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2025.01-rc2-00111-g23bc2db79d85-dirty (Nov 19 2024 - 04:56:06 +0530) | |
| SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| Changed A72 CPU frequency @0 to 1000000000Hz in DT | |
| Changed MSMC frequency @2 to 500000000Hz in DT | |
| Trying to boot from DFU | |
| ####DOWNLOAD ... OK | |
| Ctrl+C to exit ... | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Loading Environment from nowhere... OK | |
| init_env from device 18 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.11.0(release):v2.11.0-dirty | |
| NOTICE: BL31: Built : 11:51:22, May 23 2024 | |
| I/TC: | |
| I/TC: OP-TEE version: 4.4.0-dev (gcc version 13.3.0 (GCC)) #1 Fri Oct 18 17:45:27 UTC 2024 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: GIC redistributor base address not provided | |
| I/TC: Assuming default GIC group status and modifier | |
| I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: HUK Initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2025.01-rc2-00111-g23bc2db79d85-dirty (Nov 19 2024 - 04:56:31 +0530) | |
| SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| Detected: J7X-BASE-CPB rev A | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Trying to boot from DFU | |
| cdns-ti cdns-usb@4104000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19 | |
| cdns-usb3-peripheral usb@6000000: DRD version v1 (ID: 0004024e, rev: 00000200) | |
| cdns-usb3-peripheral usb@6000000: Initialized ep0 support: | |
| cdns-usb3-peripheral usb@6000000: Initialized ep1out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep2out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep3out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep4out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep5out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep6out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep7out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep8out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep9out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep10out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep11out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep12out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep13out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep14out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep15out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep1in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep2in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep3in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep4in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep5in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep6in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep7in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep8in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep9in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep10in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep11in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep12in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep13in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep14in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep15in support: BULK, INT ISO | |
| #####DOWNLOAD ... OK | |
| Ctrl+C to exit ... | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| U-Boot 2025.01-rc2-00111-g23bc2db79d85-dirty (Nov 19 2024 - 04:56:31 +0530) | |
| SoC: J7200 SR2.0 GP | |
| Model: Texas Instruments J7200 EVM | |
| Board: J7200X-PM2-SOM rev E8 | |
| DRAM: 4 GiB | |
| Core: 103 devices, 33 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 | |
| Detected: J7X-BASE-CPB rev A | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 0 | |
| => | |
| =>i2c bus | |
| Bus 0: i2c@42120000 (active 0) | |
| 51: generic_51, offset len 2, flags 0 | |
| 54: generic_54, offset len 2, flags 0 | |
| Bus 1: i2c@2000000 (active 1) | |
| 21: gpio@21, offset len 1, flags 0 | |
| 20: gpio@20, offset len 1, flags 0 | |
| 22: gpio@22, offset len 1, flags 0 | |
| Bus 2: i2c@2010000 | |
| 20: gpio@20, offset len 1, flags 0 | |
| =>i2c dev 0 | |
| Setting bus to 0 | |
| =>i2c md 0x4c 0xe | |
| 000e: 2f 00 41 00 37 00 b2 00 00 00 12 12 12 12 00 00 /.A.7........... | |
| => | |
| =>boot | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| SD/MMC found on device 1 | |
| 574 bytes read in 1 ms (560.5 KiB/s) | |
| Loaded env from uEnv.txt | |
| Importing environment from mmc1 ... | |
| Scanning for bootflows in all bootdevs | |
| Seq Method State Uclass Part Name Filename | |
| --- ----------- ------ -------- ---- ------------------------ ---------------- | |
| Scanning global bootmeth 'efi_mgr': | |
| Cannot persist EFI variables without system partition | |
| 0 efi_mgr ready (none) 0 <NULL> | |
| ** Booting bootflow '<NULL>' with efi_mgr | |
| Booting: mmc 1 | |
| error: no such device: ((hd0,msdos1)/EFI/BOOT)/EFI/BOOT/grub.cfg. | |
| error: serial port `com0' isn't found. | |
| GNU GRUB version 2.12 | |
| ┌───────────────────────────────────────────────────────────────────────────┐││││││││││││││││││││││││││││││││││││││││││││││││││││││││└───────────────────────────────────────────────────────────────────────────┘ Use the ▲ and ▼ keys to select which entry is highlighted. | |
| Press enter to boot the selected OS, `e' to edit the commands | |
| before booting or `c' for a command-line. *boot The highlighted entry will be executed automatically in 3s. The highlighted entry will be executed automatically in 2s. The highlighted entry will be executed automatically in 1s. The highlighted entry will be executed automatically in 0s. Booting `boot' | |
| EFI stub: Booting Linux Kernel... | |
| EFI stub: EFI_RNG_PROTOCOL unavailable | |
| EFI stub: Using DTB from configuration table | |
| EFI stub: Exiting boot services... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| I/TC: Reserved shared memory is enabled | |
| I/TC: Dynamic shared memory is enabled | |
| I/TC: Normal World virtualization support is disabled | |
| I/TC: Asynchronous notifications are disabled | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] | |
| [ 0.000000] Linux version 6.6.44-ti-01386-g126a8167b591-dirty (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP PREEMPT Wed Oct 30 19:49:32 UTC 2024 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J7200 EVM | |
| [ 0.000000] efi: EFI v2.10 by Das U-Boot | |
| [ 0.000000] efi: RTPROP=0xfce5c040 SMBIOS 3.0=0xfdeb8000 MEMRESERVE=0xfce36040 | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 | |
| [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a47fffff (8192 KiB) nomap non-reusable ipc-memories@a4000000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a47fffff] | |
| [ 0.000000] node 0: [mem 0x00000000a4800000-0x00000000fce5bfff] | |
| [ 0.000000] node 0: [mem 0x00000000fce5c000-0x00000000fce5cfff] | |
| [ 0.000000] node 0: [mem 0x00000000fce5d000-0x00000000fce5dfff] | |
| [ 0.000000] node 0: [mem 0x00000000fce5e000-0x00000000fce7ffff] | |
| [ 0.000000] node 0: [mem 0x00000000fce80000-0x00000000fdeb7fff] | |
| [ 0.000000] node 0: [mem 0x00000000fdeb8000-0x00000000fdeb8fff] | |
| [ 0.000000] node 0: [mem 0x00000000fdeb9000-0x00000000ffebffff] | |
| [ 0.000000] node 0: [mem 0x00000000ffec0000-0x00000000ffecffff] | |
| [ 0.000000] node 0: [mem 0x00000000ffed0000-0x00000000ffffffff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fae00000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.5 | |
| [ 0.000000] percpu: Embedded 20 pages/cpu s42920 r8192 d30808 u81920 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: Spectre-v3a | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: detected: ARM erratum 1742098 | |
| [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/Image root=PARTUUID=076c4a2a-02 rootwait rootfstype=ext4 | |
| [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/Image", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 | |
| [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 2. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000f2e00000-0x00000000f6e00000] (64MB) | |
| [ 0.000000] Memory: 3895816K/4194304K available (12032K kernel code, 1252K rwdata, 4040K rodata, 2432K init, 504K bss, 265720K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 960 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.000333] Console: colour dummy device 80x25 | |
| [ 0.000345] printk: console [tty0] enabled | |
| [ 0.000926] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.000946] pid_max: default: 32768 minimum: 301 | |
| [ 0.001028] LSM: initializing lsm=capability,integrity | |
| [ 0.001137] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.001175] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.002702] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.002807] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.003017] rcu: Hierarchical SRCU implementation. | |
| [ 0.003031] rcu: Max phase no-delay instances is 1000. | |
| [ 0.003326] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.003541] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.003847] Remapping and enabling EFI services. | |
| [ 0.004143] smp: Bringing up secondary CPUs ... | |
| [ 0.012903] Detected PIPT I-cache on CPU1 | |
| [ 0.012975] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 | |
| [ 0.012999] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 | |
| [ 0.013048] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] | |
| [ 0.013182] smp: Brought up 1 node, 2 CPUs | |
| [ 0.013222] SMP: Total of 2 processors activated. | |
| [ 0.013234] CPU features: detected: 32-bit EL0 Support | |
| [ 0.013244] CPU features: detected: CRC32 instructions | |
| [ 0.013407] CPU: All CPU(s) started at EL2 | |
| [ 0.013419] alternatives: applying system-wide alternatives | |
| [ 0.014813] devtmpfs: initialized | |
| [ 0.025101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.025141] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| [ 0.025940] pinctrl core: initialized pinctrl subsystem | |
| [ 0.026396] SMBIOS 3.7.0 present. | |
| [ 0.026425] DMI: ti Texas Instruments J7200 EVM/Texas Instruments J7200 EVM, BIOS 2025.01-rc2-00111-g23bc2db79d85-dirty 01/01/2025 | |
| [ 0.027017] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.028116] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.028328] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.028579] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.028642] audit: initializing netlink subsys (disabled) | |
| [ 0.028799] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.029163] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.029170] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.029215] cpuidle: using governor menu | |
| [ 0.029356] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.029416] ASID allocator initialised with 65536 entries | |
| [ 0.048454] Modules: 27664 pages in range for non-PLT usage | |
| [ 0.048465] Modules: 519184 pages in range for PLT usage | |
| [ 0.049190] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.049212] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.049223] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.049233] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.049243] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.049252] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.049261] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.049270] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.050580] k3-chipinfo 43000014.chipid: Family:J7200 rev:SR2.0 JTAGID[0x1bb6d02f] Detected | |
| [ 0.051671] iommu: Default domain type: Translated | |
| [ 0.051695] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.051936] SCSI subsystem initialized | |
| [ 0.052292] usbcore: registered new interface driver usbfs | |
| [ 0.052327] usbcore: registered new interface driver hub | |
| [ 0.052358] usbcore: registered new device driver usb | |
| [ 0.052818] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.052831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.052850] PTP clock support registered | |
| [ 0.053046] EDAC MC: Ver: 3.0.0 | |
| [ 0.053493] scmi_core: SCMI protocol bus registered | |
| [ 0.053565] efivars: Registered efivars operations | |
| [ 0.053861] FPGA manager framework | |
| [ 0.053945] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.054694] vgaarb: loaded | |
| [ 0.054946] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.055167] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.055204] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.061137] NET: Registered PF_INET protocol family | |
| [ 0.061508] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.064337] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
| [ 0.064397] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.064465] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.064691] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| [ 0.066010] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.066211] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.066318] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.066539] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.067079] RPC: Registered named UNIX socket transport module. | |
| [ 0.067099] RPC: Registered udp transport module. | |
| [ 0.067108] RPC: Registered tcp transport module. | |
| [ 0.067116] RPC: Registered tcp-with-tls transport module. | |
| [ 0.067124] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.067138] NET: Registered PF_XDP protocol family | |
| [ 0.067165] PCI: CLS 0 bytes, default 64 | |
| [ 0.068231] Initialise system trusted keyrings | |
| [ 0.068425] workingset: timestamp_bits=46 max_order=20 bucket_order=0 | |
| [ 0.068710] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.068979] NFS: Registering the id_resolver key type | |
| [ 0.069023] Key type id_resolver registered | |
| [ 0.069033] Key type id_legacy registered | |
| [ 0.069055] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.069067] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.096124] Key type asymmetric registered | |
| [ 0.096140] Asymmetric key parser 'x509' registered | |
| [ 0.096196] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
| [ 0.096211] io scheduler mq-deadline registered | |
| [ 0.096221] io scheduler kyber registered | |
| [ 0.096267] io scheduler bfq registered | |
| [ 0.099667] pinctrl-single 4301c000.pinctrl: 13 pins, size 52 | |
| [ 0.099874] pinctrl-single 4301c038.pinctrl: 2 pins, size 8 | |
| [ 0.100064] pinctrl-single 4301c068.pinctrl: 59 pins, size 236 | |
| [ 0.100535] pinctrl-single 4301c174.pinctrl: 8 pins, size 32 | |
| [ 0.100805] pinctrl-single 104200.pinctrl: 20 pins, size 80 | |
| [ 0.100930] pinctrl-single 104280.pinctrl: 8 pins, size 32 | |
| [ 0.101110] pinctrl-single 11c000.pinctrl: 67 pins, size 268 | |
| [ 0.101594] pinctrl-single 11c11c.pinctrl: 3 pins, size 12 | |
| [ 0.108310] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled | |
| [ 0.117572] loop: module loaded | |
| [ 0.118627] megasas: 07.725.01.00-rc1 | |
| [ 0.122097] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.123104] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.124274] usbcore: registered new interface driver usb-storage | |
| [ 0.124904] i2c_dev: i2c /dev entries driver | |
| [ 0.126083] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.126097] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.126321] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.126930] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.127430] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 0.128332] usbcore: registered new interface driver usbhid | |
| [ 0.128345] usbhid: USB HID core driver | |
| [ 0.129649] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
| [ 0.130258] optee: probing for conduit method. | |
| [ 0.130291] optee: revision 4.4 (8f645256efc0dc66) | |
| [ 0.146868] optee: dynamic shared memory is enabled | |
| [ 0.147673] random: crng init done | |
| [ 0.147785] optee: initialized driver | |
| [ 0.149953] NET: Registered PF_PACKET protocol family | |
| [ 0.150036] Key type dns_resolver registered | |
| [ 0.156828] registered taskstats version 1 | |
| [ 0.157133] Loading compiled-in X.509 certificates | |
| [ 0.169844] ti-sci 44083000.system-controller: ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| [ 0.279086] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 0.280287] pca953x 1-0021: supply vcc not found, using dummy regulator | |
| [ 0.280403] pca953x 1-0021: using no AI | |
| [ 0.303565] pca953x 1-0020: supply vcc not found, using dummy regulator | |
| [ 0.303678] pca953x 1-0020: using no AI | |
| [ 0.304525] pca953x 1-0022: supply vcc not found, using dummy regulator | |
| [ 0.304621] pca953x 1-0022: using AI | |
| [ 0.305347] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz | |
| [ 0.306236] pca953x 2-0020: supply vcc not found, using dummy regulator | |
| [ 0.306349] pca953x 2-0020: using no AI | |
| [ 0.327373] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz | |
| [ 0.327583] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created | |
| [ 0.327724] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created | |
| [ 0.327862] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created | |
| [ 0.328102] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 209 created | |
| [ 0.332433] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,32] sci-dev-id:235 | |
| [ 0.332466] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 0.332478] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 0.338077] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[120,200] sci-dev-id:211 | |
| [ 0.338107] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 0.338119] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 0.339288] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 271, base_baud = 6000000) is a 8250 | |
| [ 0.340421] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 272, base_baud = 3000000) is a 8250 | |
| [ 0.340485] printk: console [ttyS2] enabled | |
| [ 1.979407] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 273, base_baud = 3000000) is a 8250 | |
| [ 1.989132] 2830000.serial: ttyS5 at MMIO 0x2830000 (irq = 274, base_baud = 3000000) is a 8250 | |
| [ 1.998492] cadence-qspi 47040000.spi: couldn't determine phase-detect-selector | |
| [ 2.007117] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 2.050954] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 2.061538] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 2.069854] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 2.082917] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 2.090149] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 2.096635] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:0 | |
| [ 2.107882] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0 | |
| [ 2.117379] mmc0: CQHCI version 5.10 | |
| [ 2.159513] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit | |
| [ 2.255101] mmc0: Command Queue Engine enabled | |
| [ 2.259577] mmc0: new HS400 MMC card at address 0001 | |
| [ 2.265116] mmcblk0: mmc0:0001 S0J56X 14.8 GiB | |
| [ 2.271345] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB | |
| [ 2.277356] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB | |
| [ 2.283314] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (239:0) | |
| [ 2.420978] tps6594-rtc tps6594-rtc.4.auto: registered as rtc0 | |
| [ 2.426979] tps6594-rtc tps6594-rtc.4.auto: hctosys: unable to read the hardware clock | |
| [ 2.467590] vdd_core_0v85: Bringing 800000uV into 850000-850000uV | |
| [ 2.593615] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges: | |
| [ 2.601183] j721e-pcie 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0x0018001000 | |
| [ 2.609293] j721e-pcie 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0x0018011000 | |
| [ 2.617395] j721e-pcie 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000 | |
| [ 3.627791] j721e-pcie 2910000.pcie: PCI host bridge to bus 0000:00 | |
| [ 3.634102] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 3.639595] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x18001000-0x18010fff]) | |
| [ 3.649073] pci_bus 0000:00: root bus resource [mem 0x18011000-0x1fffffff] | |
| [ 3.655979] pci 0000:00:00.0: [104c:b00f] type 01 class 0x060400 | |
| [ 3.662120] pci 0000:00:00.0: supports D1 | |
| [ 3.666135] pci 0000:00:00.0: PME# supported from D0 D1 D3hot | |
| [ 3.671907] pci 0000:00:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit] | |
| [ 3.678782] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 64bit] (contains BAR0 for 4 VFs) | |
| [ 3.691578] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 3.699763] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 3.706402] pci 0000:00:00.0: BAR 7: assigned [mem 0x18400000-0x193fffff 64bit] | |
| [ 3.713720] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 3.718794] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 | |
| [ 3.725684] pcieport 0000:00:00.0: PME: Signaling with IRQ 618 | |
| [ 3.731807] pcieport 0000:00:00.0: AER: enabled with IRQ 618 | |
| [ 3.738926] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) | |
| [ 3.750548] ti-udma 31150000.dma-controller: Channels: 50 (tchan: 25, rchan: 25, gp-rflow: 8) | |
| [ 3.761504] cadence-qspi 47040000.spi: couldn't determine phase-detect-selector | |
| [ 3.772206] spi-nor spi0.0: s28hs512t (65536 Kbytes) | |
| [ 3.777338] 7 fixed-partitions partitions found on MTD device 47040000.spi.0 | |
| [ 3.784410] Creating 7 MTD partitions on "47040000.spi.0": | |
| [ 3.789904] 0x000000000000-0x000000100000 : "ospi.tiboot3" | |
| [ 3.796467] 0x000000100000-0x000000300000 : "ospi.tispl" | |
| [ 3.802665] 0x000000300000-0x000000700000 : "ospi.u-boot" | |
| [ 3.808916] 0x000000700000-0x000000740000 : "ospi.env" | |
| [ 3.814900] 0x000000740000-0x000000780000 : "ospi.env.backup" | |
| [ 3.821475] 0x000000800000-0x000003fc0000 : "ospi.rootfs" | |
| [ 3.827749] 0x000003fc0000-0x000004000000 : "ospi.phypattern" | |
| [ 3.834373] cadence-qspi 47040000.spi: Phase Detect Selector should be in between [0, 7]. Skipping Calibration | |
| [ 3.845260] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 3.890955] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 3.901583] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 3.909902] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 3.922853] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 3.930081] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 3.936511] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:0 | |
| [ 3.954321] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 | |
| [ 3.966376] mmc1: CQHCI version 5.10 | |
| [ 3.968868] clk: Disabling unused clocks | |
| [ 3.991932] ALSA device list: | |
| [ 3.994908] No soundcards found. | |
| [ 4.010909] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit | |
| [ 4.018637] Waiting for root device PARTUUID=076c4a2a-02... | |
| [ 4.073796] mmc1: new ultra high speed SDR104 SDHC card at address aaaa | |
| [ 4.081015] mmcblk1: mmc1:aaaa SL32G 29.7 GiB | |
| [ 4.090338] mmcblk1: p1 p2 | |
| [ 4.110398] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem | |
| [ 4.117729] EXT4-fs (mmcblk1p2): write access will be enabled during recovery | |
| [ 4.338916] EXT4-fs (mmcblk1p2): orphan cleanup on readonly fs | |
| [ 4.346963] EXT4-fs (mmcblk1p2): recovery complete | |
| [ 4.357743] EXT4-fs (mmcblk1p2): mounted filesystem 7299f552-401b-49f4-9d51-e89833d59903 ro with ordered data mode. Quota mode: none. | |
| [ 4.369823] VFS: Mounted root (ext4 filesystem) readonly on device 179:98. | |
| [ 4.380348] devtmpfs: mounted | |
| [ 4.385088] Freeing unused kernel memory: 2432K | |
| [ 4.389801] Run /sbin/init as init process | |
| [ 4.586091] systemd[1]: System time before build time, advancing clock. | |
| [ 4.628889] NET: Registered PF_INET6 protocol family | |
| [ 4.634821] Segment Routing with IPv6 | |
| [ 4.638529] In-situ OAM (IOAM) with IPv6 | |
| [ 4.675369] systemd[1]: systemd 255.4^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) | |
| [ 4.707318] systemd[1]: Detected architecture arm64. | |
| Welcome to Arago 2023.10! | |
| [ 4.729165] systemd[1]: Hostname set to <j7200-evm>. | |
| [ 5.034046] systemd[1]: /usr/lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 5.129800] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 5.199569] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 5.244363] systemd[1]: Created slice Slice /system/getty. | |
| [ OK ] Created slice Slice /system/getty. | |
| [ 5.268987] systemd[1]: Created slice Slice /system/modprobe. | |
| [ OK ] Created slice Slice /system/modprobe. | |
| [ 5.292920] systemd[1]: Created slice Slice /system/serial-getty. | |
| [ OK ] Created slice Slice /system/serial-getty. | |
| [ 5.316533] systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| [ 5.339347] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ OK ] Started Dispatch Password Requests to Console Directory Watch. | |
| [ 5.363232] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Started Forward Password Requests to Wall Directory Watch. | |
| [ 5.387099] systemd[1]: Expecting device /dev/ttyS2... | |
| Expecting device /dev/ttyS2... | |
| [ 5.407144] systemd[1]: Reached target Path Units. | |
| [ OK ] Reached target Path Units. | |
| [ 5.427054] systemd[1]: Reached target Remote File Systems. | |
| [ OK ] Reached target Remote File Systems. | |
| [ 5.447043] systemd[1]: Reached target Slice Units. | |
| [ OK ] Reached target Slice Units. | |
| [ 5.467051] systemd[1]: Reached target Swaps. | |
| [ OK ] Reached target Swaps. | |
| [ 5.522702] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [ OK ] Listening on RPCbind Server Activation Socket. | |
| [ 5.547224] systemd[1]: Reached target RPC Port Mapper. | |
| [ OK ] Reached target RPC Port Mapper. | |
| [ 5.574881] systemd[1]: Listening on Process Core Dump Socket. | |
| [ OK ] Listening on Process Core Dump Socket. | |
| [ 5.595398] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [ OK ] Listening on initctl Compatibility Named Pipe. | |
| [ 5.619979] systemd[1]: Listening on Journal Audit Socket. | |
| [ OK ] Listening on Journal Audit Socket. | |
| [ 5.643600] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| [ 5.667591] systemd[1]: Listening on Journal Socket. | |
| [ OK ] Listening on Journal Socket. | |
| [ 5.683698] systemd[1]: Listening on Network Service Netlink Socket. | |
| [ OK ] Listening on Network Service Netlink Socket. | |
| [ 5.712722] systemd[1]: Listening on udev Control Socket. | |
| [ OK ] Listening on udev Control Socket. | |
| [ 5.735531] systemd[1]: Listening on udev Kernel Socket. | |
| [ OK ] Listening on udev Kernel Socket. | |
| [ 5.755509] systemd[1]: Listening on User Database Manager Socket. | |
| [ OK ] Listening on User Database Manager Socket. | |
| [ 5.807283] systemd[1]: Mounting Huge Pages File System... | |
| Mounting Huge Pages File System... | |
| [ 5.826681] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting POSIX Message Queue File System... | |
| [ 5.859063] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting Kernel Debug File System... | |
| [ 5.875652] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). | |
| [ 5.894901] systemd[1]: Mounting Temporary Directory /tmp... | |
| Mounting Temporary Directory /tmp... | |
| [ 5.920087] systemd[1]: Starting Create List of Static Device Nodes... | |
| Starting Create List of Static Device Nodes... | |
| [ 5.963882] systemd[1]: Starting Load Kernel Module configfs... | |
| Starting Load Kernel Module configfs... | |
| [ 5.995909] systemd[1]: Starting Load Kernel Module drm... | |
| Starting Load Kernel Module drm... | |
| [ 6.027799] systemd[1]: Starting Load Kernel Module fuse... | |
| Starting Load Kernel Module fuse... | |
| [ 6.059441] systemd[1]: Starting RPC Bind... | |
| Starting RPC Bind... | |
| [ 6.072666] fuse: init (API version 7.39) | |
| [ 6.083392] systemd[1]: Starting File System Check on Root Device... | |
| Starting File System Check on Root Device... | |
| [ 6.123719] systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| [ 6.172631] systemd[1]: Starting Load Kernel Modules... | |
| Starting Load Kernel Modules... | |
| [ 6.183689] systemd[1]: Starting Generate network units from Kernel command line... | |
| Starting Generate network units from Kernel command line... | |
| [ 6.229542] cryptodev: loading out-of-tree module taints kernel. | |
| [ 6.235718] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting Coldplug All udev Devices... | |
| [ 6.247179] cryptodev: driver 1.14 loaded. | |
| [ 6.254046] systemd[1]: Started RPC Bind. | |
| [ OK ] Started RPC Bind. | |
| [ 6.264190] systemd[1]: Mounted Huge Pages File System. | |
| [ OK ] Mounted Huge Pages File System. | |
| [ 6.282398] systemd[1]: Mounted POSIX Message Queue File System. | |
| [ OK ] Mounted POSIX Message Queue File Sy[ 6.292252] systemd[1]: Mounted Kernel Debug File System. | |
| stem. | |
| [ OK ] Mounted Kernel Debug File System 6.303866] systemd[1]: Mounted Temporary Directory /tmp. | |
| m. | |
| [ 6.315223] systemd-journald[112]: Collecting audit messages is enabled. | |
| [ OK ] Mounted Temporary Directory /tmp. | |
| [ 6.342736] systemd[1]: Finished Create List of Static Device Nodes. | |
| [ OK ] Finished Create List of Static Device Nodes. | |
| [ 6.368601] systemd[1]: modprobe@configfs.service: Deactivated successfully. | |
| [ 6.384150] systemd[1]: Finished Load Kernel Module configfs. | |
| [ OK ] Finished Load Kernel Module configfs. | |
| [ 6.408835] systemd[1]: modprobe@drm.service: Deactivated successfully. | |
| [ 6.423883] systemd[1]: Finished Load Kernel Module drm. | |
| [ OK ] Finished Load Kernel Module drm. | |
| [ 6.437046] systemd[1]: modprobe@fuse.service: Deactivated successfully. | |
| [ 6.448078] systemd[1]: Finished Load Kernel Module fuse. | |
| [ OK ] Finished Load Kernel Module fuse. | |
| [ 6.471935] systemd[1]: Started Journal Service. | |
| [ OK ] Started Journal Service. | |
| [ OK ] Finished File System Check on Root Device. | |
| [ OK ] Finished Load Kernel Modules. | |
| [ OK ] Finished Generate network units from Kernel command line. | |
| Mounting FUSE Control File System... | |
| Mounting Kernel Configuration File System... | |
| Starting Remount Root and Kernel File Systems... | |
| Starting Apply Kernel Variables... | |
| Starting Create Static Device Nodes in /dev gracefully... | |
| [ OK ] Mounted FUSE Control File System. | |
| [ OK ] Mounted Kernel Configuration File S[ 6.734671] EXT4-fs (mmcblk1p2): re-mounted 7299f552-401b-49f4-9d51-e89833d59903 r/w. Quota mode: none. | |
| ystem. | |
| [ OK ] Finished Remount Root and Kernel File Systems. | |
| Starting Flush Journal to Persistent Storage... | |
| [ OK ] Finished Apply Kernel Variables[ 6.861767] systemd-journald[112]: Received client request to flush runtime journal. | |
| . | |
| [ OK ] Finished Create Static Device Nodes in /dev gracefully. | |
| [ OK ] Finished Flush Journal to Persistent Storage. | |
| Starting Create Static Device Nodes in /dev... | |
| [ OK ] Finished Create Static Device Nodes in /dev. | |
| [ OK ] Reached target Preparation for Local File Systems. | |
| Mounting /var/volatile... | |
| [ 7.075194] audit: type=1334 audit(1709054766.484:2): prog-id=6 op=LOAD | |
| [ 7.091078] audit: type=1334 audit(1709054766.484:3): prog-id=7 op=LOAD | |
| Starting Rule-based Manager for Device Events and Files... | |
| [ OK ] Finished Coldplug All udev Devices. | |
| [ OK ] Mounted /var/volatile. | |
| Starting Load/Save OS Random Seed... | |
| [ OK ] Reached target Local File Systems. | |
| Starting Create Volatile Files and Directories... | |
| [ OK ] Finished Load/Save OS Random Seed. | |
| [ 7.294283] audit: type=1334 audit(1709054766.704:4): prog-id=8 op=LOAD | |
| [ 7.303640] audit: type=1334 audit(1709054766.712:5): prog-id=9 op=LOAD | |
| [ 7.314266] audit: type=1334 audit(1709054766.712:6): prog-id=10 op=LOAD | |
| Starting User Database Manager... | |
| [ OK ] Finished Create Volatile Files and Directories. | |
| [ 7.391580] audit: type=1334 audit(1709054766.804:7): prog-id=11 op=LOAD | |
| Starting Network Name Resolution... | |
| [ 7.438910] audit: type=1334 audit(1709054766.848:8): prog-id=12 op=LOAD | |
| Starting Network Time Synchronization... | |
| Starting Record System Boot/Shutdown in UTMP... | |
| [ OK ] Started User Database Manager. | |
| [ OK ] Started Rule-based Manager for Device Events and Files. | |
| [ OK ] Finished Record System Boot/Shutdown in UTMP. | |
| [ OK ] Started Network Time Synchronization. | |
| [ OK ] Reached target System Time Set. | |
| [ OK ] Found device /dev/ttyS2. | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Reached target Host and Network Name Lookups. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily rotation of log files. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Reached target Timer Units. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| Starting Docker Socket for the API... | |
| [ OK ] Listening on dropbear.socket. | |
| [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. | |
| Starting Weston socket... | |
| [ 8.150969] audit: type=1334 audit(1709248631.940:9): prog-id=13 op=LOAD | |
| Starting D-Bus System Message Bus... | |
| Starting Reboot and dump vmcore via kexec... | |
| [ OK ] Listening on Docker Socket for the API. | |
| [ OK ] Listening on Weston socket. | |
| [ OK ] Reached target Socket Units. | |
| [ OK ] Finished Reboot and dump vmcore via kexec. | |
| [ OK ] Started D-Bus System Message Bus. | |
| [ OK ] Reached target Basic System. | |
| [ 8.443474] dbus-broker-lau[249]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set | |
| [ OK ] Started Job spooling tools. | |
| Starting Avahi mDNS/DNS-SD Stack... | |
| [ OK ] Started Periodic Command Scheduler. | |
| Starting Print notice about GPLv3 packages... | |
| Starting IPv6 Packet Filtering Framework... | |
| Starting IPv4 Packet Filtering Framework... | |
| [ OK ] Started irqbalance daemon. | |
| [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. | |
| [ 8.694110] audit: type=1334 audit(1709248632.484:10): prog-id=14 op=LOAD | |
| Starting User Login Management... | |
| [ 8.711049] audit: type=1334 audit(1709248632.484:11): prog-id=15 op=LOAD | |
| Starting Telnet Server... | |
| [ OK ] Finished IPv6 Packet Filtering Framework. | |
| [ OK ] Finished IPv4 Packet Filtering Framework. | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| [ OK ] Reached target Preparation for Network. | |
| Starting Network Configuration... | |
| [ OK ] Finished Telnet Server. | |
| [ OK ] Started User Login Management. | |
| [ 9.610643] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
| [ 9.639169] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
| [ 9.645616] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' | |
| [ OK ] Started Network Configuration. | |
| [ OK ] Reached target Network. | |
| [ 9.884652] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| Starting Enable and configure wl18xx bluetooth stack... | |
| Starting containerd container runtime... | |
| Starting LLDP daemon... | |
| [ OK ] Started Netperf Benchmark Server. | |
| [ 9.943322] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| Starting Permit User Sessions... | |
| [ OK ] Finished Permit User Sessions. | |
| [ OK ] Started Getty on tty1. | |
| [ OK ] Started Serial Getty on ttyS2. | |
| [ OK ] Reached target Login Prompts. | |
| Starting Synchronize System and HW clocks... | |
| Starting Weston, a Wayland compositor, as a system service... | |
| [ OK ] Finished Enable and configure wl18xx bluetooth stack. | |
| [ OK ] Started LLDP daemon. | |
| [ OK ] Created slice User Slice of UID 1000. | |
| Starting User Runtime Directory /run/user/1000... | |
| [ 10.580560] CAN device driver interface | |
| [ OK ] Finished User Runtime Directory /run/user/1000. | |
| [ 10.622584] ti-udma 285c0000.dma-controller: chan1: is running! | |
| Starting User Manager for UID 1000... | |
| [ 10.911230] at24 0-0050: supply vcc not found, using dummy regulator | |
| [ 11.037588] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
| [ 11.389101] k3_r5_rproc bus@100000:bus@28380000:r5fss@41000000: k3_r5_cluster_rproc_init failed, ret = -517 | |
| [ 11.475684] m_can_platform 2701000.can: m_can device registered (irq=710, version=32) | |
| [ 11.495549] m_can_platform 40528000.can: m_can device registered (irq=711, version=32) | |
| [ 11.516804] m_can_platform 40568000.can: m_can device registered (irq=712, version=32) | |
| [ 11.576497] remoteproc remoteproc0: releasing 41000000.r5f | |
| [ 11.588435] k3_r5_rproc bus@100000:bus@28380000:r5fss@41000000: k3_r5_cluster_rproc_init failed, ret = -517 | |
| [ 11.603078] k3_r5_rproc bus@100000:r5fss@5c00000: k3_r5_cluster_rproc_init failed, ret = -517 | |
| [ 11.675742] remoteproc remoteproc0: releasing 41000000.r5f | |
| [ 11.685818] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc8900 | |
| [ 11.747225] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc8900 | |
| [ 11.751438] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) | |
| [ 11.759507] remoteproc remoteproc1: releasing 5c00000.r5f | |
| [ 11.775125] platform 41000000.r5f: configured R5F for IPC-only mode | |
| [ 11.785761] platform 41000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000 | |
| [ 11.801653] remoteproc remoteproc0: 41000000.r5f is available | |
| [ 11.810092] remoteproc remoteproc0: attaching to 41000000.r5f | |
| [ 11.819325] rproc-virtio rproc-virtio.11.auto: assigned reserved memory node r5f-dma-memory@a0000000 | |
| [ 11.835693] virtio_rpmsg_bus virtio0: rpmsg host is online | |
| [ 11.844386] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd | |
| [ 11.847100] rproc-virtio rproc-virtio.11.auto: registered virtio0 (type 7) | |
| [ 11.852053] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe | |
| [ 11.863454] remoteproc remoteproc0: remote processor 41000000.r5f is now attached | |
| [ 11.891344] platform 5c00000.r5f: configured R5F for remoteproc mode | |
| [ 11.907306] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memory@a2000000 | |
| [ OK ] Started User Manager for UID 1000. | |
| [ 11.932454] remoteproc remoteproc1: 5c00000.r5f is available | |
| [ OK ] Started Session c1 of User weston. | |
| [ 11.956261] remoteproc remoteproc1: powering up 5c00000.r5f | |
| [ 11.964283] remoteproc remoteproc1: Booting fw image j7200-main-r5f0_0-fw, size 75448 | |
| [ 11.976521] rproc-virtio rproc-virtio.12.auto: assigned reserved memory node r5f-dma-memory@a2000000 | |
| [ 11.989175] virtio_rpmsg_bus virtio1: rpmsg host is online | |
| [ 11.995494] rproc-virtio rproc-virtio.12.auto: registered virtio1 (type 7) | |
| [ 12.002518] remoteproc remoteproc1: remote processor 5c00000.r5f is now up | |
| [FAILED] Failed to start Weston, a Wayland compositor, as a system service. | |
| See 'systemctl status weston.service' for details. | |
| [ 12.198470] gpio-mux mux-controller: 2-way mux-controller registered | |
| [ OK ] Finished Synchronize System and HW clocks. | |
| [ 12.236038] m_can_platform 2731000.can: m_can device registered (irq=715, version=32) | |
| [ OK ] Created slice Slice /system/tee-supplicant. | |
| [ OK ] Started TEE Supplicant on teepriv0. | |
| [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. | |
| Starting Virtual Console Setup... | |
| [ OK ] Created slice Slice /system/systemd-fsck. | |
| Expecting device /dev/mmcblk1p1... | |
| [ 12.796634] m_can_platform 2701000.can main_mcan0: renamed from can0 | |
| [ OK ] Reached target Hardware activated USB gadget. | |
| [ 12.885994] m_can_platform 40528000.can mcu_mcan0: renamed from can1 | |
| [ OK ] Finished Virtual Console Setup. | |
| [ 12.939030] m_can_platform 40568000.can mcu_mcan1: renamed from can2 | |
| [ 12.993028] m_can_platform 2731000.can main_mcan3: renamed from can3 | |
| [ OK ] Found device /dev/mmcblk1p1. | |
| [ OK ] Started containerd container runtime. | |
| Starting File System Check on /dev/mmcblk1p1... | |
| [ OK ] Finished File System Check on /dev/mmcblk1p1. | |
| Mounting /run/media/boot-mmcblk1p1... | |
| [ OK ] Mounted /run/media/boot-mmcblk1p1. | |
| *************************************************************** | |
| *************************************************************** | |
| NOTICE: This file system contains the following GPL-3.0 packages: | |
| adwaita-icon-theme-symbolic | |
| autoconf | |
| bash | |
| bc | |
| binutils | |
| cifs-utils | |
| coreutils-stdbuf | |
| coreutils | |
| cpio | |
| cpp-symlinks | |
| cpp | |
| dosfstools | |
| elfutils | |
| findutils | |
| g++-symlinks | |
| g++ | |
| gawk | |
| gcc-symlinks | |
| gcc | |
| gdb | |
| gdbserver | |
| gettext | |
| glmark2 | |
| gnu-config | |
| grub-common | |
| grub-editenv | |
| grub-efi | |
| gzip | |
| kbd-keymaps-pine | |
| less | |
| libasm1 | |
| libatomic-dev | |
| libatomic1 | |
| libbfd | |
| libdebuginfod1 | |
| libdw1 | |
| libelf1 | |
| libgcc-s-dev | |
| libgcc1 | |
| libgdbm-compat4 | |
| libgdbm6 | |
| libgettextlib | |
| libgettextsrc | |
| libgmp10 | |
| libidn2-0 | |
| libmpc3 | |
| libmpfr6 | |
| libopcodes | |
| libqt5charts-examples | |
| libqt5charts-plugins | |
| libqt5charts-qmlplugins | |
| libqt5charts5 | |
| libqt5serialport-examples | |
| libqt5serialport-plugins | |
| libqt5serialport-qmlplugins | |
| libqt5serialport5 | |
| libqt5svg-examples | |
| libqt5svg-plugins | |
| libqt5svg-qmlplugins | |
| libqt5svg5 | |
| libqt5virtualkeyboard-plugins | |
| libqt5virtualkeyboard-qmlplugins | |
| libqt5virtualkeyboard5 | |
| libreadline8 | |
| libstdc++-dev | |
| libstdc++6 | |
| libunistring5 | |
| m4 | |
| make | |
| nettle | |
| parted | |
| piglit | |
| qt3d-plugins | |
| qt3d-qmlplugins | |
| qt3d | |
| qtbase-examples | |
| qtbase-plugins | |
| qtbase-qmlplugins | |
| qtbase | |
| qtconnectivity-plugins | |
| qtconnectivity-qmlplugins | |
| qtconnectivity | |
| qtdeclarative-plugins | |
| qtdeclarative-qmlplugins | |
| qtdeclarative-tools | |
| qtdeclarative | |
| qtgraphicaleffects-qmlplugins | |
| qtlocation-examples | |
| qtlocation-plugins | |
| qtlocation-qmlplugins | |
| qtlocation | |
| qtmultimedia-examples | |
| qtmultimedia-plugins | |
| qtmultimedia-qmlplugins | |
| qtmultimedia | |
| qtquics-qmlplugins.control | |
| qtquics2-plugins.control | |
| qtquics2-qmlplugins.control | |
| qtquics2.control | |
| qtscript-examples | |
| qtscript-plugins | |
| qtscript-qmlplugins | |
| qtscript | |
| qtwayland-examples | |
| qtwayland-plugins | |
| qtwayland-qmlplugins | |
| qtwayland | |
| tar | |
| which | |
| If you do not wish to distribute GPL-3.0 components please remove | |
| the above packages prior to distribution. This can be done using | |
| the opkg remove command. i.e.: | |
| opkg remove <package> | |
| Where <package> is the name printed in the list above | |
| NOTE: If the package is a dependency of another package you | |
| will be notified of the dependent packages. You should | |
| use the --force-removal-of-dependent-packages option to | |
| also remove the dependent packages as well | |
| *************************************************************** | |
| *************************************************************** | |
| [ OK ] Finished Print notice about GPLv3 packages. | |
| [ OK ] Reached target Multi-User System. | |
| [ OK ] Reached target Graphical Interface. | |
| Starting Record Runlevel Change in UTMP... | |
| [ OK ] Finished Record Runlevel Change in UTMP. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project j7200-evm ttyS2 | |
| Arago 2023.10 j7200-evm ttyS2 | |
| j7200-evm login:root | |
| [ 15.941260] kauditd_printk_skb: 8 callbacks suppressed | |
| [ 15.941271] audit: type=1006 audit(1709248639.732:16): pid=918 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 | |
| [ 15.959178] audit: type=1300 audit(1709248639.732:16): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffd24238e8 a2=1 a3=1 items=0 ppid=1 pid=918 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd-executor" key=(null) | |
| [ 15.985763] audit: type=1327 audit(1709248639.732:16): proctitle="(systemd)" | |
| [ 15.992870] audit: type=1334 audit(1709248639.760:17): prog-id=18 op=LOAD | |
| [ 15.999733] audit: type=1300 audit(1709248639.760:17): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffdf9e1868 a2=90 a3=0 items=0 ppid=1 pid=918 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" key=(null) | |
| [ 16.025525] audit: type=1327 audit(1709248639.760:17): proctitle="(systemd)" | |
| [ 16.033212] audit: type=1334 audit(1709248639.776:18): prog-id=18 op=UNLOAD | |
| [ 16.040767] audit: type=1300 audit(1709248639.776:18): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=1 a2=0 a3=ffff867c0c60 items=0 ppid=1 pid=918 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" key=(null) | |
| [ 16.066746] audit: type=1327 audit(1709248639.776:18): proctitle="(systemd)" | |
| [ 16.074358] audit: type=1334 audit(1709248639.776:19): prog-id=19 op=LOAD | |
| root@j7200-evm:~#uname -a | |
| Linux j7200-evm 6.6.44-ti-01386-g126a8167b591-dirty # | |
| root@j7200-evm:~# | |
| root@j7200-evm:~#k3conf dump clock 202 | |
| |------------------------------------------------------------------------------| | |
| | VERSION INFO | | |
| |------------------------------------------------------------------------------| | |
| | K3CONF | (version 0.3-nogit built Thu Jul 25 14:13:02 UTC 2024) | | |
| | SoC | J7200 SR2.0 | | |
| | SYSFW | ABI: 4.0 (firmware version 0x000a '10.1.6--v10.01.06 (Fiery Fox))') | | |
| |------------------------------------------------------------------------------| | |
| |-------------------------------------------------------------------------------------------| | |
| | Device ID | Clock ID | Clock Name | Status | Clock Frequency | | |
| |-------------------------------------------------------------------------------------------| | |
| | 202 | 2 | DEV_A72SS0_CORE0_0_ARM_CLK_CLK | CLK_STATE_READY | 1000000000 | | |
| |-------------------------------------------------------------------------------------------| | |
| root@j7200-evm:~#k3conf dump clock 4 | |
| |------------------------------------------------------------------------------| | |
| | VERSION INFO | | |
| |------------------------------------------------------------------------------| | |
| | K3CONF | (version 0.3-nogit built Thu Jul 25 14:13:02 UTC 2024) | | |
| | SoC | J7200 SR2.0 | | |
| | SYSFW | ABI: 4.0 (firmware version 0x000a '10.1.6--v10.01.06 (Fiery Fox))') | | |
| |------------------------------------------------------------------------------| | |
| |------------------------------------------------------------------------------------------| | |
| | Device ID | Clock ID | Clock Name | Status | Clock Frequency | | |
| |------------------------------------------------------------------------------------------| | |
| | 4 | 0 | DEV_A72SS0_CORE0_ARM_CLK_CLK | CLK_STATE_READY | 1000000000 | | |
| | 4 | 1 | DEV_A72SS0_CORE0_MSMC_CLK | CLK_STATE_READY | 500000000 | | |
| | 4 | 2 | DEV_A72SS0_CORE0_PLL_CTRL_CLK | CLK_STATE_READY | 500000000 | | |
| |------------------------------------------------------------------------------------------| | |
| root@j7200-evm:~# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment