Created
April 22, 2025 10:14
-
-
Save aniket-l/9124c65a85a093a5bdc4517e0f813259 to your computer and use it in GitHub Desktop.
J7200-EVM u-boot i2c repeated start v3
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2025.04-rc5-00838-g2a6fad734363-dirty (Apr 22 2025 - 15:14:47 +0530) | |
| SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x4c, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x4c, len=0x1, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x4c, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x4c, len=0x1, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x4c, len=0x2, i2c_con_reg=0x8603 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x48, len=0x2, i2c_con_reg=0x8603 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x48, len=0x2, i2c_con_reg=0x8603 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x48, len=0x2, i2c_con_reg=0x8603 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x48, len=0x2, i2c_con_reg=0x8603 | |
| Trying to boot from DFU | |
| ####DOWNLOAD ... OK | |
| Ctrl+C to exit ... | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x4c, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x4c, len=0x1, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x4c, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x4c, len=0x1, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x4c, len=0x2, i2c_con_reg=0x8603 | |
| Loading Environment from nowhere... OK | |
| init_env from device 18 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.11.0(release):v2.11.0-906-g58b25570c9-dirty | |
| NOTICE: BL31: Built : 04:20:32, Nov 1 2024 | |
| I/TC: | |
| I/TC: OP-TEE version: 4.4.0-dev (gcc version 13.3.0 (GCC)) #1 Fri Oct 18 17:45:27 UTC 2024 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: GIC redistributor base address not provided | |
| I/TC: Assuming default GIC group status and modifier | |
| I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: HUK Initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2025.04-rc5-00838-g2a6fad734363-dirty (Apr 22 2025 - 15:15:06 +0530) | |
| SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| omap24_i2c_findpsc: speed [kHz]: 400 psc: 0x9 sscl: 0x9 ssch: 0x3 | |
| omap24_i2c_findpsc: speed [kHz]: 400 psc: 0x9 sscl: 0x9 ssch: 0x3 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x7, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x1, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x7, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x3, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x2e, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x3, i2c_con_reg=0x8403 | |
| Detected: J7X-BASE-CPB rev A | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x7, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x1, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x7, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x3, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x2e, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x3, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0xc2, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x3, i2c_con_reg=0x8403 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Trying to boot from DFU | |
| cdns-usb3-peripheral usb@6000000: DRD version v1 (ID: 0004024e, rev: 00000200) | |
| cdns-usb3-peripheral usb@6000000: Initialized ep0 support: | |
| cdns-usb3-peripheral usb@6000000: Initialized ep1out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep2out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep3out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep4out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep5out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep6out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep7out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep8out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep9out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep10out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep11out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep12out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep13out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep14out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep15out support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep1in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep2in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep3in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep4in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep5in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep6in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep7in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep8in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep9in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep10in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep11in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep12in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep13in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep14in support: BULK, INT ISO | |
| cdns-usb3-peripheral usb@6000000: Initialized ep15in support: BULK, INT ISO | |
| #####DOWNLOAD ... OK | |
| Ctrl+C to exit ... | |
| Skipping authentication on GP device | |
| Skipping authentication on GP device | |
| U-Boot 2025.04-rc5-00838-g2a6fad734363-dirty (Apr 22 2025 - 15:15:06 +0530) | |
| SoC: J7200 SR2.0 GP | |
| Model: Texas Instruments J7200 EVM | |
| Board: J7200X-PM2-SOM rev E8 | |
| DRAM: 2 GiB (effective 4 GiB) | |
| omap24_i2c_findpsc: speed [kHz]: 400 psc: 0x9 sscl: 0x9 ssch: 0x3 | |
| omap24_i2c_findpsc: speed [kHz]: 400 psc: 0x9 sscl: 0x9 ssch: 0x3 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x22, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x22, len=0x3, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x22, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x22, len=0x3, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x22, len=0x4, i2c_con_reg=0x8603 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x22, len=0x2, i2c_con_reg=0x8603 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x22, len=0x2, i2c_con_reg=0x8603 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x22, len=0x2, i2c_con_reg=0x8603 | |
| Core: 100 devices, 32 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 | |
| omap24_i2c_findpsc: speed [kHz]: 400 psc: 0x9 sscl: 0x9 ssch: 0x3 | |
| omap24_i2c_findpsc: speed [kHz]: 400 psc: 0x9 sscl: 0x9 ssch: 0x3 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x7, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x1, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x7, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x3, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x2e, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x51, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x51, len=0x3, i2c_con_reg=0x8403 | |
| Detected: J7X-BASE-CPB rev A | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x7, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x1, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x1, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x7, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x3, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x2e, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x3, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0xc2, i2c_con_reg=0x8403 | |
| omap_i2c_xfer: 2 messages | |
| omap_i2c_xfer: chip=0x54, len=0x2, i2c_con_reg=0x8601 | |
| omap_i2c_xfer: chip=0x54, len=0x3, i2c_con_reg=0x8403 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 2 1 0 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x22, len=0x2, i2c_con_reg=0x8603 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x22, len=0x2, i2c_con_reg=0x8603 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x22, len=0x2, i2c_con_reg=0x8603 | |
| omap_i2c_xfer: 1 messages | |
| omap_i2c_xfer: chip=0x22, len=0x2, i2c_con_reg=0x8603 | |
| SD/MMC found on device 1 | |
| 574 bytes read in 1 ms (560.5 KiB/s) | |
| Loaded env from uEnv.txt | |
| Importing environment from mmc1 ... | |
| Scanning for bootflows in all bootdevs | |
| Seq Method State Uclass Part Name Filename | |
| --- ----------- ------ -------- ---- ------------------------ ---------------- | |
| Scanning global bootmeth 'efi_mgr': | |
| Cannot persist EFI variables without system partition | |
| 0 efi_mgr ready (none) 0 <NULL> | |
| ** Booting bootflow '<NULL>' with efi_mgr | |
| Booting: mmc 1 | |
| error: no such device: ((hd0,msdos1)/EFI/BOOT)/EFI/BOOT/grub.cfg. | |
| error: serial port `com0' isn't found. | |
| GNU GRUB version 2.12 | |
| �������─�����������������������������������������─�������������������������������������������������������������─�����������������������������������������������������������������������������������������������������������������│���������������������│��������������������������������������������│����������������│����│����������│��������������������������─�����������������������������������������─�������������������������������������������������������������─��������������� Use the � and � keys to select which entry is highlighted. | |
| Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. *boot The highlighted entry will be executed automatically in 3s. The highlighted entry will be executed automatically in 2s. The highlighted entry will be executed automatically in 1s. The highlighted entry will be executed automatically in 0s. Booting `boot' | |
| EFI stub: Booting Linux Kernel... | |
| EFI stub: EFI_RNG_PROTOCOL unavailable | |
| EFI stub: Using DTB from configuration table | |
| EFI stub: Exiting boot services... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| I/TC: Reserved shared memory is enabled | |
| I/TC: Dynamic shared memory is enabled | |
| I/TC: Normal World virtualization support is disabled | |
| I/TC: Asynchronous notifications are disabled | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] | |
| [ 0.000000] Linux version 6.12.13-ti-g5657fc069e8b (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP PREEMPT Thu Feb 20 17:02:08 UTC 2025 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J7200 EVM | |
| [ 0.000000] efi: EFI v2.11 by Das U-Boot | |
| [ 0.000000] efi: RTPROP=0xfce70040 SMBIOS 3.0=0xfdecc000 MEMRESERVE=0xfce48040 | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 | |
| [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a47fffff (8192 KiB) nomap non-reusable ipc-memories@a4000000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a47fffff] | |
| [ 0.000000] node 0: [mem 0x00000000a4800000-0x00000000fce6ffff] | |
| [ 0.000000] node 0: [mem 0x00000000fce70000-0x00000000fce70fff] | |
| [ 0.000000] node 0: [mem 0x00000000fce71000-0x00000000fce71fff] | |
| [ 0.000000] node 0: [mem 0x00000000fce72000-0x00000000fce93fff] | |
| [ 0.000000] node 0: [mem 0x00000000fce94000-0x00000000fdecbfff] | |
| [ 0.000000] node 0: [mem 0x00000000fdecc000-0x00000000fdeccfff] | |
| [ 0.000000] node 0: [mem 0x00000000fdecd000-0x00000000ffecffff] | |
| [ 0.000000] node 0: [mem 0x00000000ffed0000-0x00000000ffedffff] | |
| [ 0.000000] node 0: [mem 0x00000000ffee0000-0x00000000ffffffff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fae00000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.5 | |
| [ 0.000000] percpu: Embedded 22 pages/cpu s51288 r8192 d30632 u90112 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: Spectre-v3a | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: detected: ARM erratum 1742098 | |
| [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/Image root=PARTUUID=076c4a2a-02 rootwait rootfstype=ext4 | |
| [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/Image", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 | |
| [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 2. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000f2c00000-0x00000000f6c00000] (64MB) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. | |
| [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 960 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1 | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.000293] Console: colour dummy device 80x25 | |
| [ 0.000300] printk: legacy console [tty0] enabled | |
| [ 0.000612] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.000623] pid_max: default: 32768 minimum: 301 | |
| [ 0.000672] LSM: initializing lsm=capability | |
| [ 0.000756] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.000781] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.019991] rcu: Hierarchical SRCU implementation. | |
| [ 0.020009] rcu: Max phase no-delay instances is 1000. | |
| [ 0.020153] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level | |
| [ 0.020485] Remapping and enabling EFI services. | |
| [ 0.020636] smp: Bringing up secondary CPUs ... | |
| [ 0.029180] Detected PIPT I-cache on CPU1 | |
| [ 0.029241] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 | |
| [ 0.029257] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 | |
| [ 0.029293] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] | |
| [ 0.029456] smp: Brought up 1 node, 2 CPUs | |
| [ 0.029479] SMP: Total of 2 processors activated. | |
| [ 0.029484] CPU: All CPU(s) started at EL2 | |
| [ 0.029489] CPU features: detected: 32-bit EL0 Support | |
| [ 0.029494] CPU features: detected: CRC32 instructions | |
| [ 0.029522] alternatives: applying system-wide alternatives | |
| [ 0.029797] Memory: 3885704K/4194304K available (12352K kernel code, 1232K rwdata, 4432K rodata, 2624K init, 604K bss, 267728K reserved, 32768K cma-reserved) | |
| [ 0.030315] devtmpfs: initialized | |
| [ 0.035927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.035955] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| [ 0.036474] 27408 pages in range for non-PLT usage | |
| [ 0.036482] 518928 pages in range for PLT usage | |
| [ 0.036627] pinctrl core: initialized pinctrl subsystem | |
| [ 0.036924] SMBIOS 3.7.0 present. | |
| [ 0.036943] DMI: ti Texas Instruments J7200 EVM/Texas Instruments J7200 EVM, BIOS 2025.04-rc5-00838-g2a6fad734363-dirty 04/01/2025 | |
| [ 0.036956] DMI: Memory slots populated: 0/0 | |
| [ 0.038954] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.039431] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.039559] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.039700] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.039740] audit: initializing netlink subsys (disabled) | |
| [ 0.039904] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.040154] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.040159] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.040195] cpuidle: using governor menu | |
| [ 0.040302] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.040340] ASID allocator initialised with 65536 entries | |
| [ 0.044284] /bus@100000/interrupt-controller@1800000: Fixed dependency cycle(s) with /bus@100000/interrupt-controller@1800000 | |
| [ 0.051479] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.051498] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.051504] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.051510] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.051515] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.051520] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.051526] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.051531] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.052520] k3-chipinfo 43000014.chipid: Family:J7200 rev:SR2.0 JTAGID[0x1bb6d02f] Detected | |
| [ 0.052952] iommu: Default domain type: Translated | |
| [ 0.052966] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.053397] SCSI subsystem initialized | |
| [ 0.053601] usbcore: registered new interface driver usbfs | |
| [ 0.053623] usbcore: registered new interface driver hub | |
| [ 0.053641] usbcore: registered new device driver usb | |
| [ 0.053920] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.053928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.053939] PTP clock support registered | |
| [ 0.053957] EDAC MC: Ver: 3.0.0 | |
| [ 0.054154] scmi_core: SCMI protocol bus registered | |
| [ 0.054194] efivars: Registered efivars operations | |
| [ 0.054400] FPGA manager framework | |
| [ 0.054451] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.054895] vgaarb: loaded | |
| [ 0.055078] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.055233] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.055253] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.058661] NET: Registered PF_INET protocol family | |
| [ 0.058964] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.060419] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
| [ 0.060469] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.060483] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.060650] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| [ 0.061818] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.061985] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.062053] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.062213] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.062584] RPC: Registered named UNIX socket transport module. | |
| [ 0.062597] RPC: Registered udp transport module. | |
| [ 0.062602] RPC: Registered tcp transport module. | |
| [ 0.062606] RPC: Registered tcp-with-tls transport module. | |
| [ 0.062611] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.062625] PCI: CLS 0 bytes, default 64 | |
| [ 0.063285] Initialise system trusted keyrings | |
| [ 0.063433] workingset: timestamp_bits=46 max_order=20 bucket_order=0 | |
| [ 0.063622] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.063785] NFS: Registering the id_resolver key type | |
| [ 0.063807] Key type id_resolver registered | |
| [ 0.063812] Key type id_legacy registered | |
| [ 0.063828] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.063835] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.085284] Key type asymmetric registered | |
| [ 0.085297] Asymmetric key parser 'x509' registered | |
| [ 0.085335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) | |
| [ 0.085342] io scheduler mq-deadline registered | |
| [ 0.085349] io scheduler kyber registered | |
| [ 0.085375] io scheduler bfq registered | |
| [ 0.087321] pinctrl-single 4301c000.pinctrl: 13 pins, size 52 | |
| [ 0.087448] pinctrl-single 4301c038.pinctrl: 2 pins, size 8 | |
| [ 0.087542] pinctrl-single 4301c068.pinctrl: 59 pins, size 236 | |
| [ 0.087796] pinctrl-single 4301c174.pinctrl: 8 pins, size 32 | |
| [ 0.087938] pinctrl-single 104200.pinctrl: 20 pins, size 80 | |
| [ 0.088004] pinctrl-single 104280.pinctrl: 8 pins, size 32 | |
| [ 0.088101] pinctrl-single 11c000.pinctrl: 67 pins, size 268 | |
| [ 0.088362] pinctrl-single 11c110.pinctrl: 1 pins, size 4 | |
| [ 0.088430] pinctrl-single 11c11c.pinctrl: 3 pins, size 12 | |
| [ 0.088534] pinctrl-single 11c164.pinctrl: 2 pins, size 8 | |
| [ 0.089048] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.092156] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.096498] loop: module loaded | |
| [ 0.097123] megasas: 07.727.03.00-rc1 | |
| [ 0.099017] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.099573] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.100217] usbcore: registered new interface driver usb-storage | |
| [ 0.100599] i2c_dev: i2c /dev entries driver | |
| [ 0.101239] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.101249] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.101403] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.101906] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 0.102352] usbcore: registered new interface driver usbhid | |
| [ 0.102360] usbhid: USB HID core driver | |
| [ 0.103034] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 (0,8000003f) counters available | |
| [ 0.103355] optee: probing for conduit method. | |
| [ 0.103377] optee: revision 4.4 (8f645256efc0dc66) | |
| [ 0.119823] optee: dynamic shared memory is enabled | |
| [ 0.120249] optee: initialized driver | |
| [ 0.120334] random: crng init done | |
| [ 0.121669] NET: Registered PF_PACKET protocol family | |
| [ 0.121724] Key type dns_resolver registered | |
| [ 0.125433] registered taskstats version 1 | |
| [ 0.125510] Loading compiled-in X.509 certificates | |
| [ 0.132524] ti-sci 44083000.system-controller: ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') | |
| [ 0.198530] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 0.199339] pca953x 1-0021: supply vcc not found, using dummy regulator | |
| [ 0.199404] pca953x 1-0021: using no AI | |
| [ 0.215565] pca953x 1-0020: supply vcc not found, using dummy regulator | |
| [ 0.215626] pca953x 1-0020: using no AI | |
| [ 0.216321] pca953x 1-0022: supply vcc not found, using dummy regulator | |
| [ 0.216381] pca953x 1-0022: using AI | |
| [ 0.217064] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz | |
| [ 0.217651] pca953x 2-0020: supply vcc not found, using dummy regulator | |
| [ 0.217715] pca953x 2-0020: using no AI | |
| [ 0.231426] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz | |
| [ 0.231561] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created | |
| [ 0.231658] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created | |
| [ 0.231746] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created | |
| [ 0.231906] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 209 created | |
| [ 0.234837] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,32] sci-dev-id:235 | |
| [ 0.234858] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 0.234864] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 0.237898] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[120,200] sci-dev-id:211 | |
| [ 0.237919] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 0.237924] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 0.238663] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 268, base_baud = 6000000) is a 8250 | |
| [ 0.239379] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 269, base_baud = 3000000) is a 8250 | |
| [ 0.239436] printk: legacy console [ttyS2] enabled | |
| [ 1.898241] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 270, base_baud = 3000000) is a 8250 | |
| [ 1.907596] 2830000.serial: ttyS0 at MMIO 0x2830000 (irq = 271, base_baud = 3000000) is a 8250 | |
| [ 1.916707] cadence-qspi 47040000.spi: couldn't determine phase-detect-selector | |
| [ 1.924890] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.967085] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.976924] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.985208] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 1.998190] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 2.005409] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64, Policers 8 | |
| [ 2.013830] mmc0: CQHCI version 5.10 | |
| [ 2.057663] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit | |
| [ 2.150372] mmc0: Command Queue Engine enabled | |
| [ 2.154838] mmc0: new HS400 MMC card at address 0001 | |
| [ 2.164197] mmcblk0: mmc0:0001 S0J56X 14.8 GiB | |
| [ 2.169893] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB | |
| [ 2.175589] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB | |
| [ 2.181162] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (239:0) | |
| [ 2.277194] tps6594-rtc tps6594-rtc.4.auto: registered as rtc0 | |
| [ 2.283171] tps6594-rtc tps6594-rtc.4.auto: hctosys: unable to read the hardware clock | |
| [ 2.320678] vdd_core_0v85: Bringing 800000uV into 850000-850000uV | |
| [ 2.440048] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges: | |
| [ 2.447577] j721e-pcie 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0x0018001000 | |
| [ 2.455669] j721e-pcie 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0x0018011000 | |
| [ 2.463765] j721e-pcie 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000 | |
| [ 3.575551] j721e-pcie 2910000.pcie: PCI host bridge to bus 0000:00 | |
| [ 3.581849] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 3.587330] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x18001000-0x18010fff]) | |
| [ 3.596795] pci_bus 0000:00: root bus resource [mem 0x18011000-0x1fffffff] | |
| [ 3.603678] pci 0000:00:00.0: [104c:b00f] type 01 class 0x060400 PCIe Root Port | |
| [ 3.610990] pci 0000:00:00.0: PCI bridge to [bus 00] | |
| [ 3.615951] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] | |
| [ 3.622035] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] | |
| [ 3.628816] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] | |
| [ 3.636637] pci 0000:00:00.0: supports D1 | |
| [ 3.640644] pci 0000:00:00.0: PME# supported from D0 D1 D3hot | |
| [ 3.646400] pci 0000:00:00.0: VF BAR 0 [mem 0x00000000-0x003fffff 64bit] | |
| [ 3.653091] pci 0000:00:00.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit]: contains BAR 0 for 4 VFs | |
| [ 3.663654] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 3.671757] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 3.678379] pci 0000:00:00.0: VF BAR 0 [mem 0x18400000-0x193fffff 64bit]: assigned | |
| [ 3.685944] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 3.690910] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] | |
| [ 3.696472] pci_bus 0000:00: resource 5 [mem 0x18011000-0x1fffffff] | |
| [ 3.702800] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 | |
| [ 3.709601] pcieport 0000:00:00.0: PME: Signaling with IRQ 613 | |
| [ 3.715624] pcieport 0000:00:00.0: AER: enabled with IRQ 613 | |
| [ 3.722159] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) | |
| [ 3.732384] ti-udma 31150000.dma-controller: Channels: 50 (tchan: 25, rchan: 25, gp-rflow: 8) | |
| [ 3.742193] cadence-qspi 47040000.spi: couldn't determine phase-detect-selector | |
| [ 3.752370] 7 fixed-partitions partitions found on MTD device 47040000.spi.0 | |
| [ 3.759467] Creating 7 MTD partitions on "47040000.spi.0": | |
| [ 3.764944] 0x000000000000-0x000000100000 : "ospi.tiboot3" | |
| [ 3.771095] 0x000000100000-0x000000300000 : "ospi.tispl" | |
| [ 3.776905] 0x000000300000-0x000000700000 : "ospi.u-boot" | |
| [ 3.782818] 0x000000700000-0x000000740000 : "ospi.env" | |
| [ 3.788453] 0x000000740000-0x000000780000 : "ospi.env.backup" | |
| [ 3.794710] 0x000000800000-0x000003fc0000 : "ospi.rootfs" | |
| [ 3.800627] 0x000003fc0000-0x000004000000 : "ospi.phypattern" | |
| [ 3.806896] cadence-qspi 47040000.spi: Phase Detect Selector should be in between [0, 7]. Skipping Calibration | |
| [ 3.817471] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 3.859082] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 3.868951] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 3.877236] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 3.890169] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 3.897389] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64, Policers 8 | |
| [ 3.910041] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 | |
| [ 3.920595] clk: Disabling unused clocks | |
| [ 3.920959] mmc1: CQHCI version 5.10 | |
| [ 3.939704] PM: genpd: Disabling unused power domains | |
| [ 3.944832] ALSA device list: | |
| [ 3.947843] No soundcards found. | |
| [ 3.969690] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit | |
| [ 3.977307] Waiting for root device PARTUUID=076c4a2a-02... | |
| [ 4.046614] mmc1: new ultra high speed SDR104 SDHC card at address aaaa | |
| [ 4.057627] mmcblk1: mmc1:aaaa SC16G 14.8 GiB | |
| [ 4.067620] mmcblk1: p1 p2 | |
| [ 4.081123] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem | |
| [ 4.088449] EXT4-fs (mmcblk1p2): write access will be enabled during recovery | |
| [ 5.506532] EXT4-fs (mmcblk1p2): orphan cleanup on readonly fs | |
| [ 5.512424] EXT4-fs (mmcblk1p2): recovery complete | |
| [ 5.545216] EXT4-fs (mmcblk1p2): mounted filesystem c015616e-4227-41c5-b323-8bac0c4e2340 ro with ordered data mode. Quota mode: none. | |
| [ 5.557244] VFS: Mounted root (ext4 filesystem) readonly on device 179:98. | |
| [ 5.567573] devtmpfs: mounted | |
| [ 5.572345] Freeing unused kernel memory: 2624K | |
| [ 5.576971] Run /sbin/init as init process | |
| [ 5.660069] EXT4-fs (mmcblk1p2): re-mounted c015616e-4227-41c5-b323-8bac0c4e2340 r/w. Quota mode: none. | |
| Seeding 256 bits and crediting | |
| Saving 256 bits of creditable seed for next boot | |
| Starting syslogd: OK | |
| Starting klogd: OK | |
| Running sysctl: OK | |
| Starting network: [ 5.830690] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 5.840191] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| udhcpc: started, v1.37.0 | |
| udhcpc: broadcasting discover | |
| udhcpc: no lease, forking to background | |
| OK | |
| Starting crond: OK | |
| Starting sshd: OK | |
| Welcome to Buildroot | |
| ti-target login: root | |
| # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment