Instantly share code, notes, and snippets.

Embed
What would you like to do?
Xilinx Zynq MP First Stage Boot Loader
Release 2016.4 Mar 21 2017 - 10:11:24
U-Boot 2016.07 (Mar 07 2017 - 14:06:33 -0600) Xilinx ZynqMP ZCU102 revB
I2C: ready
DRAM: 4 GiB
EL Level: EL3
MMC: sdhci@ff170000: 0
Using default environment
In: serial@ff000000
Out: serial@ff000000
Err: serial@ff000000
Bootmode: LVL_SHFT_SD_MODE1
SCSI: SATA link 0 timeout.
SATA link 1 timeout.
AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
scanning bus for devices...
Found 0 device(s).
Net: ZYNQ GEM: ff0e0000, phyaddr 12, interface rgmii-id
eth0: ethernet@ff0e0000
Error: ethernet@ff0e0000 address ff:ff:ff:ff:ff:ff illegal value
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Device: sdhci@ff170000
Manufacturer ID: 3
OEM: 5344
Name: SL16G
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.8 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
reading uEnv.txt
309 bytes read in 11 ms (27.3 KiB/s)
Loaded environment from uEnv.txt
Importing environment from SD ...
reading system.dtb
29222 bytes read in 17 ms (1.6 MiB/s)
reading Image
12600832 bytes read in 815 ms (14.7 MiB/s)
## Flattened Device Tree blob at 04000000
Booting using the fdt blob at 0x4000000
Loading Device Tree to 000000000fff5000, end 000000000ffff225 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.0-xilinx-v2016.3 (kratsg@dc) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT Tue Mar 7 14:43:00 CST 2017
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
[ 0.000000] bootconsole [cdns0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 256 MiB at 0x0000000070000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] swapper[0]: undefined instruction: pc=ffffff800808f2c0
[ 0.000000] Code: b8236885 29009841 17ffffa5 00000000 (d4000003)
[ 0.000000] Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-xilinx-v2016.3 #1
[ 0.000000] Hardware name: ZynqMP ZCU102 RevB (DT)
[ 0.000000] task: ffffff8008c07400 ti: ffffff8008bf8000 task.ti: ffffff8008bf8000
[ 0.000000] PC is at arm_smccc_smc+0x0/0x20
[ 0.000000] LR is at __invoke_psci_fn_smc+0x28/0x38
[ 0.000000] pc : [<ffffff800808f2c0>] lr : [<ffffff800866e118>] pstate: 000002c5
[ 0.000000] sp : ffffff8008bfbe70
[ 0.000000] x29: ffffff8008bfbe80 x28: 000000000086b000
[ 0.000000] x27: ffffff80080811a8 x26: 0000000000d04000
[ 0.000000] x25: ffffff8008cc2138 x24: 0000000081000200
[ 0.000000] x23: ffffff8008a524a0 x22: ffffff8008c0bb10
[ 0.000000] x21: ffffff8008c14000 x20: ffffff8008ce6000
[ 0.000000] x19: ffffff8008ce6b68 x18: 0000000000000010
[ 0.000000] x17: 0000000000000000 x16: 0000000000000018
[ 0.000000] x15: 0000000000000006 x14: ffffffffffffffff
[ 0.000000] x13: 0000000000000038 x12: 0101010101010101
[ 0.000000] x11: 0000000000000004 x10: 0101010101010101
[ 0.000000] x9 : 0000000000000004 x8 : 0000000000000004
[ 0.000000] x7 : 0000000000000000 x6 : 0000000000000000
[ 0.000000] x5 : 0000000000000000 x4 : 0000000000000000
[ 0.000000] x3 : 0000000000000000 x2 : 0000000000000000
[ 0.000000] x1 : 0000000000000000 x0 : 0000000084000000
[ 0.000000]
[ 0.000000] Process swapper (pid: 0, stack limit = 0xffffff8008bf8020)
[ 0.000000] Stack: (0xffffff8008bfbe70 to 0xffffff8008bfc000)
[ 0.000000] be60: ffffff8008bfbe90 ffffff8008c0bb10
[ 0.000000] be80: ffffff8008bfbeb0 ffffff8008baf010 ffffff8008bfbeb0 ffffff8008698cb4
[ 0.000000] bea0: ffffffc87ffa0da8 ffffffc06fffff00 ffffff8008bfbee0 ffffff8008baf220
[ 0.000000] bec0: ffffff8008c08000 ffffffc06fffff00 ffffff8008c14000 ffffff8008c0bb10
[ 0.000000] bee0: ffffff8008bfbef0 ffffff8008baf370 ffffff8008bfbf10 ffffff8008b88664
[ 0.000000] bf00: ffffff8008c08000 ffffff8008bcc528 ffffff8008bfbfa0 ffffff8008b85650
[ 0.000000] bf20: ffffff8008bc1248 ffffff8008bfd000 ffffff8008c88000 ffffff8008c88000
[ 0.000000] bf40: 0000000000000000 0000000000000000 0000000000d01000 0000000000d04000
[ 0.000000] bf60: ffffff80080811a8 ffffff8008870050 0000000000000001 000000000fff5000
[ 0.000000] bf80: 0000000000000001 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] bfa0: 0000000000000000 ffffff80080811d8 0000000000000400 0000000000000e12
[ 0.000000] bfc0: 000000000fff5000 0000000030d00800 0000000000000000 0000000000000000
[ 0.000000] bfe0: 0000000000000000 ffffff8008bc1248 0000000000000000 0000000000000000
[ 0.000000] Call trace:
[ 0.000000] Exception stack(0xffffff8008bfbca0 to 0xffffff8008bfbdc0)
[ 0.000000] bca0: ffffff8008ce6b68 ffffff8008ce6000 ffffff8008bfbe70 ffffff800808f2c0
[ 0.000000] bcc0: 00000000000002c5 0000000000000000 0000000000000004 ffffff8000030001
[ 0.000000] bce0: ffffff800808f2c0 ffffff8008c8a1e0 0000000000000000 0000000000000029
[ 0.000000] bd00: 0000000000000000 0000000000000029 0000000000000006 00000000000002c0
[ 0.000000] bd20: 0000000100000000 ffffff8008c8ae60 0000000000000000 ffffff8008c9ab50
[ 0.000000] bd40: ffffff8008bfbde0 ffffff80080d6fe8 0000000084000000 0000000000000000
[ 0.000000] bd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] bd80: 0000000000000000 0000000000000000 0000000000000004 0000000000000004
[ 0.000000] bda0: 0101010101010101 0000000000000004 0101010101010101 0000000000000038
[ 0.000000] [<ffffff800808f2c0>] arm_smccc_smc+0x0/0x20
[ 0.000000] [<ffffff8008baf010>] psci_probe+0x30/0x22c
[ 0.000000] [<ffffff8008baf220>] psci_0_2_init+0x14/0x1c
[ 0.000000] [<ffffff8008baf370>] psci_dt_init+0x30/0x40
[ 0.000000] [<ffffff8008b88664>] setup_arch+0x4f4/0x6ac
[ 0.000000] [<ffffff8008b85650>] start_kernel+0x70/0x3a8
[ 0.000000] [<ffffff80080811d8>] 0xffffff80080811d8
[ 0.000000] Code: b8236885 29009841 17ffffa5 00000000 (d4000003)
[ 0.000000] ---[ end trace cb88537fdc8fa200 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment