Skip to content

Instantly share code, notes, and snippets.

/omnia-reflash

Created November 12, 2017 09:43
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save anonymous/05c66a0d9bb5dfd535aa786e30fc5eac to your computer and use it in GitHub Desktop.
Save anonymous/05c66a0d9bb5dfd535aa786e30fc5eac to your computer and use it in GitHub Desktop.
Download ZIP
Raw
omnia-reflash
U-Boot SPL 2015.10-rc2 (Aug 18 2016 - 20:43:35)
High speed PHY - Version: 2.0
SERDES0 card detect: PEX
Initialize Turris board topology
Detected Device ID 6820
board SerDes lanes topology details:
| Lane # | Speed | Type |
--------------------------------
| 0 | 5 | PCIe0 |
| 1 | 5 | USB3 HOST0 |
| 2 | 5 | PCIe1 |
| 3 | 5 | USB3 HOST1 |
| 4 | 5 | PCIe2 |
| 5 | 0 | SGMII2 |
--------------------------------
:** Link is Gen1, check the EP capability
PCIe, Idx 0: remains Gen1
:** Link is Gen1, check the EP capability
PCIe, Idx 1: remains Gen1
PCIe, Idx 2: detected no link
High speed PHY - Ended Successfully
DDR3 Training Sequence - Ver TIP-1.29.0
Memory config in EEPROM: 0x02
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
U-Boot 2015.10-rc2 (Aug 18 2016 - 20:43:35 +0200), Build: jenkins-omnia-master-23
SoC: MV88F6820-A0
Watchdog enabled
I2C: ready
SPI: ready
DRAM: 2 GiB (ECC not enabled)
Enabling Armada 385 watchdog.
Disabling MCU startup watchdog.
Regdomain set to **
MMC: mv_sdh: 0
SF: Detected S25FL164K with page size 256 Bytes, erase size 64 KiB, total 8 MiB
*** Warning - bad CRC, using default environment
PCI:
00:01.0 - 168c:002e - Network controller
PCI:
01:00.0 - 11ab:6820 - Memory controller
01:01.0 - 168c:003c - Network controller
Model: Marvell Armada 385 GP
Board: Turris Omnia SN: 0000000B00010FC7
Regdomain set to **
SCSI: MVEBU SATA INIT
SATA link 0 timeout.
SATA link 1 timeout.
AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
flags: 64bit ncq led only pmp fbss pio slum part sxs
Net: neta2
Hit any key to stop autoboot: 0
Setting bus to 1
BOOT RESCUE
SF: Detected S25FL164K with page size 256 Bytes, erase size 64 KiB, total 8 MiB
device 0 offset 0x100000, size 0x700000
SF: 7340032 bytes @ 0x100000 Read: OK
Kernel image @ 0x1000000 [ 0x000000 - 0x689b30 ]
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.13-369554f06f5670aea91212be2c6d6e58-7 (beast@slave01) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49274) ) #4 SMP Thu Aug 18 20:46:34 CEST 2016
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Turris Omnia
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 11 pages/cpu @eefcb000 s13952 r8192 d22912 u45056
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 rootfstype=btrfs rootdelay=2 root=b301 rootflags=subvol=@,commit=5 rw omniarescue=3
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2069096K/2097152K available (4730K kernel code, 144K rwdata, 676K rodata, 4912K init, 182K bss, 28056K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc054fe6c (5408 kB)
[ 0.000000] .init : 0xc0550000 - 0xc0a1c000 (4912 kB)
[ 0.000000] .data : 0xc0a1c000 - 0xc0a40274 ( 145 kB)
[ 0.000000] .bss : 0xc0a40274 - 0xc0a6dc38 ( 183 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000000] Switching to timer-based delay loop, resolution 40ns
[ 0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[ 0.000010] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000148] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.000156] pid_max: default: 32768 minimum: 301
[ 0.000204] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000209] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000424] CPU: Testing write buffer coherency: ok
[ 0.000530] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.000543] Setting up static identity map for 0x8280 - 0x82d8
[ 0.000620] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.000700] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.001127] Booting CPU 1
[ 0.001298] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.001326] Brought up 2 CPUs
[ 0.001332] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[ 0.001335] CPU: All CPU(s) started in SVC mode.
[ 0.003015] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.003071] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.003088] xor: measuring software checksum speed
[ 0.099896] arm4regs : 2787.600 MB/sec
[ 0.199898] 8regs : 1859.200 MB/sec
[ 0.299897] 32regs : 1669.200 MB/sec
[ 0.299900] xor: using function: arm4regs (2787.600 MB/sec)
[ 0.299906] pinctrl core: initialized pinctrl subsystem
[ 0.300235] NET: Registered protocol family 16
[ 0.300733] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.329920] cpuidle: using governor ladder
[ 0.332553] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.332561] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.530176] raid6: int32x1 gen() 155 MB/s
[ 0.699949] raid6: int32x1 xor() 202 MB/s
[ 0.869940] raid6: int32x2 gen() 255 MB/s
[ 1.039965] raid6: int32x2 xor() 229 MB/s
[ 1.209976] raid6: int32x4 gen() 284 MB/s
[ 1.379992] raid6: int32x4 xor() 190 MB/s
[ 1.549915] raid6: int32x8 gen() 371 MB/s
[ 1.719951] raid6: int32x8 xor() 214 MB/s
[ 1.719954] raid6: using algorithm int32x8 gen() 371 MB/s
[ 1.719957] raid6: .... xor() 214 MB/s, rmw enabled
[ 1.719960] raid6: using intx1 recovery algorithm
[ 1.720546] clocksource: Switched to clocksource armada_370_xp_clocksource
[ 1.720902] NET: Registered protocol family 2
[ 1.721141] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.721179] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.721240] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.721277] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.721304] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.721403] NET: Registered protocol family 1
[ 2.853611] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 2.853926] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.853932] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.854252] bounce: pool size: 64 pages
[ 2.854284] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.854289] io scheduler noop registered
[ 2.854293] io scheduler deadline registered (default)
[ 2.854666] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 2.854993] irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
[ 2.855141] irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
[ 2.855463] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[ 2.855473] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 2.855478] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 2.855484] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.855778] PCI: bus0: Fast back to back transfers disabled
[ 2.855784] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.855791] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.855797] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.856060] PCI: bus1: Fast back to back transfers disabled
[ 2.856318] PCI: bus2: Fast back to back transfers disabled
[ 2.856378] PCI: bus3: Fast back to back transfers enabled
[ 2.856440] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
[ 2.856447] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe04fffff]
[ 2.856454] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[ 2.856465] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.856471] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 2.856479] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe03fffff 64bit]
[ 2.856491] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0400000-0xe040ffff pref]
[ 2.856495] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 2.856501] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe04fffff]
[ 2.856507] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 2.856613] mv_xor f1060800.xor: Marvell shared XOR driver
[ 2.890819] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 2.890915] mv_xor f1060900.xor: Marvell shared XOR driver
[ 2.930816] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 2.930961] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 2.931275] console [ttyS0] disabled
[ 2.951347] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 15625000) is a 16550A
[ 3.706271] console [ttyS0] enabled
[ 3.730060] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 23, base_baud = 15625000) is a 16550A
[ 3.739776] m25p80 spi0.0: s25fl164k (8192 Kbytes)
[ 3.746147] 2 ofpart partitions found on MTD device spi0.0
[ 3.751662] Creating 2 MTD partitions on "spi0.0":
[ 3.756465] 0x000000000000-0x000000100000 : "U-Boot"
[ 3.761797] 0x000000100000-0x000000800000 : "Rescue system"
[ 3.768051] libphy: Fixed MDIO Bus: probed
[ 3.772381] libphy: orion_mdio_bus: probed
[ 3.778497] mvneta f1030000.ethernet eth0: Using hardware mac address d8:58:d7:00:64:ad
[ 3.787298] mvneta f1034000.ethernet eth1: Using hardware mac address d8:58:d7:00:64:ae
[ 3.796113] mvneta f1070000.ethernet eth2: Using hardware mac address d8:58:d7:00:64:af
[ 3.804363] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[ 4.320654] i2c /dev entries driver
[ 4.324886] at24 1-0054: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
[ 4.331668] i2c i2c-0: Added multiplexed i2c bus 1
[ 4.336539] i2c i2c-0: Added multiplexed i2c bus 2
[ 4.341422] i2c i2c-0: Added multiplexed i2c bus 3
[ 4.346282] i2c i2c-0: Added multiplexed i2c bus 4
[ 4.351155] i2c i2c-0: Added multiplexed i2c bus 5
[ 4.356016] i2c i2c-0: Added multiplexed i2c bus 6
[ 4.360890] i2c i2c-0: Added multiplexed i2c bus 7
[ 4.365785] i2c i2c-0: Added multiplexed i2c bus 8
[ 4.370597] pca954x 0-0070: registered 8 multiplexed busses for I2C mux pca9547
[ 4.378056] sdhci: Secure Digital Host Controller Interface driver
[ 4.384258] sdhci: Copyright(c) Pierre Ossman
[ 4.388769] sdhci-pxav3 f10d8000.sdhci: No vmmc regulator found
[ 4.394714] sdhci-pxav3 f10d8000.sdhci: No vqmmc regulator found
[ 4.440546] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 4.447994] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.463076] NET: Registered protocol family 10
[ 4.468008] NET: Registered protocol family 17
[ 4.472487] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 4.485129] 8021q: 802.1Q VLAN Support v1.8
[ 4.489368] Registering SWP/SWPB emulation handler
[ 4.494746] Btrfs loaded
[ 4.497844] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mi:10
[ 4.504595] mvsw61xx 10.mvsw61xx: Using indirect addressing
[ 4.523828] mmc0: Enabling HPI failed
[ 4.527502] mmc0: new high speed MMC card at address 0001
[ 4.533136] mmcblk0: mmc0:0001 M MOR 1.83 GiB
[ 4.537745] mmcblk0boot0: mmc0:0001 M MOR partition 1 2.00 MiB
[ 4.543760] mmcblk0boot1: mmc0:0001 M MOR partition 2 2.00 MiB
[ 4.549760] mmcblk0rpmb: mmc0:0001 M MOR partition 3 128 KiB
[ 4.555528] armada38x-rtc f10a3800.rtc: setting system clock to 2017-11-12 09:28:02 UTC (1510478882)
[ 4.566862] Freeing unused kernel memory: 4912K (c0550000 - c0a1c000)
modprobe grace
modprobe libata
[ 4.640298] SCSI subsystem initialized
modprobe async_raid6_rec[ 4.652478] async_tx: api initialized (async)
ov
modprobe nls_base
modprobe sha256_generic
modprobe mac8021[ 4.662471] Loading modules backported from Linux version master-2015-12-03-0-g1677f62
1
[ 4.670779] Backport generated by backports.git backports-20151120-0-g906a6b3
[ 4.690122] cfg80211: World regulatory domain updated:
[ 4.695299] cfg80211: DFS Master region: unset
[ 4.699667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.709481] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.717517] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.726943] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.734986] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.744506] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.754020] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.762136] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.770158] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
modprobe fuse
[ 4.782604] fuse init (API version 7.23)
modprobe dm-region-hash
[ 4.791922] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
modprobe xfs
[ 4.868335] SGI XFS with security attributes, no debug enabled
modprobe orion_wdt
[ 4.876632] orion_wdt: Initial timeout 171 sec
modprobe md4
modprobe mvsdio
modprobe cifs
modprobe cryptodev
[ 4.901731] cryptodev: driver 1.8 loaded.
modprobe async_xor
modprobe ahci_mvebu
[ 4.911226] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 4.920300] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 4.929778] scsi host0: ahci-mvebu
[ 4.933392] scsi host1: ahci-mvebu
[ 4.936898] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44
[ 4.944848] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44
[ 5.300541] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.305973] ata1: SATA link down (SStatus 0 SControl 300)
modprobe marvell-cesa
[ 5.314697] marvell-cesa f1090000.crypto: CESA device successfully registered
modprobe libcrc32c
modprobe fat
modprobe dm-crypt
modprobe algif_hash
[ 5.330705] NET: Registered protocol family 38
modprobe sunrpc
[ 5.347492] RPC: Registered named UNIX socket transport module.
[ 5.353455] RPC: Registered udp transport module.
[ 5.358169] RPC: Registered tcp transport module.
[ 5.362892] RPC: Registered tcp NFSv4.1 backchannel transport module.
modprobe nfs
modprobe af_alg
modprobe algif_skcipher
modprobe dm-mod
modprobe nls_utf8
modprobe vfat
modprobe nfsv3
modprobe raid1
[ 5.396718] md: raid1 personality registered for level 1
modprobe sd_mod
modprobe loop
[ 5.409070] loop: module loaded
modprobe ahci_platform
modprobe libahci_platform
modprobe md5
modprobe multipath
[ 5.420102] md: multipath personality registered for level -4
modprobe usb-storage
[ 5.435731] usbcore: registered new interface driver usbfs
[ 5.441303] usbcore: registered new interface driver hub
[ 5.446659] usbcore: registered new device driver usb
[ 5.452973] usbcore: registered new interface driver usb-storage
modprobe nls_cp437
modprobe des_generic
modprobe lockd
modprobe usb-common
modprobe hwmon
modprobe seqiv
modprobe async_pq
modprobe armada_thermal
modprobe dm-mirror
modprobe ehci-orion
[ 5.490514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.497372] ehci-orion: EHCI orion driver
[ 5.501542] orion-ehci f1058000.usb: EHCI Host Controller
[ 5.506965] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 5.514638] orion-ehci f1058000.usb: irq 39, io mem 0xf1058000
[ 5.530562] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 5.536754] hub 1-0:1.0: USB hub found
[ 5.540525] hub 1-0:1.0: 1 port detected
modprobe gf128mul
modprobe cbc
modprobe cfg80211
modprobe thermal_sys
modprobe xhci-pci
modprobe async_memcpy
modprobe hmac
modprobe authenc
modprobe md-mod
modprobe sha512_generic
modprobe dm-log
modprobe xts
modprobe ehci-hcd
modprobe usbcore
modprobe aead
modprobe crypto_null
modprobe ath
modprobe linear
[ 5.580406] md: linear personality registered for level -1
modprobe raid10
[ 5.588797] md: raid10 personality registered for level 10
modprobe libahci
modprobe raid0
[ 5.598093] md: raid0 personality registered for level 0
modprobe compat
modprobe xhci-hcd
modprobe xhci-plat-hcd
[ 5.608840] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 5.614391] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[ 5.622020] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 5.630603] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
[ 5.636634] hub 2-0:1.0: USB hub found
[ 5.640406] hub 2-0:1.0: 1 port detected
[ 5.644482] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 5.649811] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[ 5.657393] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.665742] hub 3-0:1.0: USB hub found
[ 5.669512] hub 3-0:1.0: 1 port detected
[ 5.673616] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 5.678948] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[ 5.686559] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 5.695139] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
[ 5.701148] hub 4-0:1.0: USB hub found
[ 5.704918] hub 4-0:1.0: 1 port detected
[ 5.708942] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 5.714291] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[ 5.721835] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.730158] hub 5-0:1.0: USB hub found
[ 5.733946] hub 5-0:1.0: 1 port detected
modprobe ehci-platform
[ 5.740246] ehci-platform: EHCI generic platform driver
modprobe exportfs
modprobe async_tx
modprobe block2mtd
modprobe ecb
modprobe exfat
[ 5.757028] exFAT: Version 1.2.9
modprobe raid456
[ 5.766196] md: raid6 personality registered for level 6
[ 5.771568] md: raid5 personality registered for level 5
[ 5.776891] md: raid4 personality registered for level 4
modprobe scsi_mod
MODE=3
Mode: Reflash...
[ 5.960551] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[ 6.248992] usb 2-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 6.257929] usb 2-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 6.277959] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 6.284189] scsi host2: usb-storage 2-1:1.0
[ 7.292236] scsi 2:0:0:0: Direct-Access JetFlash TS512MJF2A 1.00 PQ: 0 ANSI: 2
[ 7.306878] sd 2:0:0:0: [sda] 1003600 512-byte logical blocks: (514 MB/490 MiB)
[ 7.314513] sd 2:0:0:0: [sda] Write Protect is off
[ 7.319594] sd 2:0:0:0: [sda] No Caching mode page found
[ 7.324929] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 7.339175] sda: sda1
[ 7.348622] sd 2:0:0:0: [sda] Attached SCSI removable disk
Testing FS on device sda1
mount_fs /dev/sda1 /srcmnt
[ 7.890691] FAT-fs (sda1): IO charset iso8859-1 not found
[ 7.896702] [EXFAT] trying to mount...
[ 7.900845] [EXFAT] mounted successfully
Searching for /srcmnt/omnia-medkit*.tar.gz on sda1
Found medkit file /srcmnt/omnia-medkit-latest.tar.gz on device sda1
[ 17.910532] mmc0: Timeout waiting for hardware interrupt.
[ 27.930532] mmc0: Timeout waiting for hardware interrupt.
[ 27.935985] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00
[ 27.998065] random: nonblocking pool is initialized
[ 49.410799] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 70.885636] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 92.360471] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 113.835308] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 135.310145] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 156.784982] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 178.259818] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 199.734654] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 221.209490] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 242.684327] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 264.159164] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 285.634000] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 307.108836] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 328.583673] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 350.058510] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 371.533346] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 393.008182] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 414.483019] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 435.957856] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 457.432692] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 478.907528] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 500.382365] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 521.857202] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 543.332037] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 564.806874] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 586.281711] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 607.756548] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 627.950538] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect
[ 627.957527] blk_update_request: I/O error, dev mmcblk0, sector 0
[ 627.963554] Buffer I/O error on dev mmcblk0, logical block 0, lost async page write
1+0 records in
1+0 records out
512 bytes (51[ 627.984292] mmc0: Controller never released inhibit bit(s).
2B) copied, 620.[ 627.989934] mmcblk0: unknown error -5 sending read/write command, card status 0xe00
061598 seconds, [ 627.998984] blk_update_request: I/O error, dev mmcblk0, sector 0
0B/s
Wel[ 628.006389] blk_update_request: I/O error, dev mmcblk0, sector 8
come to fdisk (u[ 628.013799] blk_update_request: I/O error, dev mmcblk0, sector 16
til-linux 2.25.2[ 628.021297] blk_update_request: I/O error, dev mmcblk0, sector 24
).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
[ 628.038852] mmc0: Controller never released inhibit bit(s).
[ 628.045123] mmcblk0: unknown error -5 sending read/write command, card status 0xe00
[ 628.052816] blk_update_request: I/O error, dev mmcblk0, sector 0
[ 628.058837] Buffer I/O error on dev mmcblk0, logical block 0, async page read
fdisk: cannot open /dev/mmcblk0: I/O error
[ 628.077355] mmc0: Controller never released inhibit bit(s).
[ 628.083002] mmcblk0: unknown error -5 sending read/write command, card status 0xe00
[ 628.090696] blk_update_request: I/O error, dev mmcblk0, sector 0
[ 628.096718] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 628.113906] mmc0: Controller never released inhibit bit(s).
[ 628.119539] mmcblk0: unknown error -5 sending read/write command, card status 0xe00
[ 628.127231] blk_update_request: I/O error, dev mmcblk0, sector 0
[ 628.133265] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 628.140421] mmcblk0: unable to read partition table
blockdev: /dev/mmcblk0: I/O error
Error: Partition /dev/mmcblk0p1 missing. Exit.
umount_fs /srcmnt
[ 629.200586] [EXFAT] trying to unmount...
[ 629.204532] [EXFAT] unmounted successfully
BusyBox v1.23.2 (2016-08-18 20:38:45 CEST) built-in shell (ash)
/ # [ 649.594357] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 671.069193] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 692.544030] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 714.018866] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 735.493703] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 756.968540] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 778.443375] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 799.918212] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 821.393048] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
[ 842.867885] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment