Created
December 17, 2017 11:54
-
-
Save anonymous/0d9be95cd9c36ff006f7aa03e7c2cc85 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 2.015333] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 15625000) is a 16550A | |
[ 2.687858] console [ttyS0] enabled | |
[ 2.696113] brd: module loaded | |
[ 2.699910] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda | |
[ 2.706329] nand: Micron MT29F2G08ABAEAH4 | |
[ 2.710376] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 | |
[ 2.718070] 2 cmdlinepart partitions found on MTD device pxa3xx_nand-0 | |
[ 2.724654] Creating 2 MTD partitions on "pxa3xx_nand-0": | |
[ 2.730076] 0x000000000000-0x000000100000 : "uboot" | |
[ 2.736744] 0x000000100000-0x000010000000 : "ubi0" | |
[ 3.072337] libphy: Fixed MDIO Bus: probed | |
[ 3.076768] libphy: orion_mdio_bus: probed | |
[ 3.081121] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled | |
[ 3.090379] mvneta f1030000.ethernet eth0: Using hardware mac address de:f5:81:e0:28:d8 | |
[ 3.099143] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0 | |
[ 3.106786] i2c /dev entries driver | |
[ 3.120927] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). | |
[ 3.133496] orion_wdt: Initial timeout 171 sec | |
[ 3.139409] marvell-cesa f1090000.crypto: CESA device successfully registered | |
[ 3.147044] NET: Registered protocol family 10 | |
[ 3.162097] Segment Routing with IPv6 | |
[ 3.165815] NET: Registered protocol family 17 | |
[ 3.170355] ThumbEE CPU extension supported. | |
[ 3.174642] Registering SWP/SWPB emulation handler | |
[ 3.181208] armada38x-rtc f10a3800.rtc: setting system clock to 2105-07-27 07:51:26 UTC (4278124286) | |
[ 3.191724] Freeing unused kernel memory: 1024K | |
INIT: version 2.88 booting | |
[ 3.334666] print_req_error: I/O error, dev mtdblock1, sector 0 | |
[ 3.340922] print_req_error: I/O error, dev mtdblock1, sector 8 | |
[ 3.347018] print_req_error: I/O error, dev mtdblock1, sector 16 | |
[ 3.353257] print_req_error: I/O error, dev mtdblock1, sector 24 | |
[ 3.359541] print_req_error: I/O error, dev mtdblock1, sector 0 | |
[ 3.365482] Buffer I/O error on dev mtdblock1, logical block 0, async page read | |
[ 3.373170] print_req_error: I/O error, dev mtdblock0, sector 0 | |
[ 3.379266] print_req_error: I/O error, dev mtdblock0, sector 8 | |
[ 3.385423] print_req_error: I/O error, dev mtdblock0, sector 16 | |
[ 3.391627] print_req_error: I/O error, dev mtdblock0, sector 24 | |
[ 3.397844] print_req_error: I/O error, dev mtdblock0, sector 0 | |
[ 3.403783] Buffer I/O error on dev mtdblock0, logical block 0, async page read | |
Starting udev | |
[ 3.458214] udevd[88]: starting version 3.2.1 | |
[ 3.471172] udevd[89]: starting eudev-3.2.1 | |
Starting ifplugd: eth0 | |
[ 4.030360] mvneta f1030000.ethernet eth0: configuring for fixed/sgmii link mode | |
[ 4.042556] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
[ 4.048452] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
[ 4.065995] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
Mon Nov 20 12:39:11 UTC 2017 | |
INIT: Entering runlevel: 5 | |
Configuring network interfaces... done. | |
Starting system message bus: dbus. | |
Starting OpenBSD Secure Shell server: sshd | |
generating ssh RSA key... | |
generating ssh ECDSA key... | |
generating ssh DSA key... | |
generating ssh ED25519 key... | |
done. | |
Slot: Unknown | |
PIL/basic pil-2017.07-3-gcbd7a4f-dirty wandboard /dev/ttyS0 | |
output-module login: root | |
Password: | |
root@output-module:~# flash_eraseall /dev/mtd1 | |
flash_eraseall has been replaced by `flash_erase <mtddev> 0 0`; please use it | |
flash_erase: Skipping bad block at 00000000 | |
flash_erase: Skipping bad block at 00020000 | |
flash_erase: Skipping bad block at 00040000 | |
flash_erase: Skipping bad block at 00060000 | |
flash_erase: Skipping bad block at 00080000 | |
flash_erase: Skipping bad block at 000a0000 | |
flash_erase: Skipping bad block at 000c0000 | |
flash_erase: Skipping bad block at 000e0000 | |
flash_erase: Skipping bad block at 00100000 | |
flash_erase: Skipping bad block at 00120000 | |
flash_erase: Skipping bad block at 00140000 | |
flash_erase: Skipping bad block at 00160000 | |
flash_erase: Skipping bad block at 00180000 | |
flash_erase: Skipping bad block at 001a0000 | |
flash_erase: Skipping bad block at 001c0000 | |
flash_erase: Skipping bad block at 001e0000 | |
flash_erase: Skipping bad block at 00200000 | |
flash_erase: Skipping bad block at 00220000 | |
flash_erase: Skipping bad block at 00240000 | |
flash_erase: Skipping bad block at 00260000 | |
flash_erase: Skipping bad block at 00280000 | |
[...] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment