dump

U-Boot SPL 2017.11-00035-ge9282bb30b-dirty (Dec 12 2017 - 11:22:21)
High speed PHY - Version: 2.0
Detected Device ID 6810
board SerDes lanes topology details:
 | Lane #  | Speed |  Type       |
 --------------------------------
 |   0    |  5   |  PCIe0	|
 |   1    |  0   |  SGMII1	|
 --------------------------------
PCIe, Idx 0: detected no link
High speed PHY - Ended Successfully
DDR3 Training Sequence - Ver TIP-1.29.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully


U-Boot 2017.11-00035-ge9282bb30b-dirty (Dec 12 2017 - 11:22:21 +0100)

SoC:   MV88F6810-A0 at 1066 MHz
DRAM:  1 GiB (533 MHz, 16-bit, ECC not enabled)
WDT:   Enabling Armada 385 watchdog.
NAND:  PXA3xx: strength 4, ecc_stepsize 512, page_size 2048
256 MiB
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
ubi0: default fastmap pool size: 100
ubi0: default fastmap WL pool size: 50
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=1", size 255 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 2032, bad PEBs: 8, corrupted PEBs: 0
ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 0
ubi0: available PEBs: 1994, total reserved PEBs: 38, PEBs reserved for bad PEB handling: 32
Volume config not found!

** Unable to read env from ubi0:config **
Volume config_r not found!

** Unable to read redundant env from ubi0:config_r **
*** Warning - bad CRC, using default environment

Model: Triax dvb-tc output
Board: Triax dvb-tc output
Net:   
Warning: ethernet@30000 (eth0) using random MAC address - 26:d3:56:98:ca:b4
eth0: ethernet@30000
=> 
=> 
=> 
=> 
=> nand erase.part ubi0; nand scrub 0xFF80000 0x80000; nand bad

NAND erase.part: device 0 offset 0x100000, size 0xff00000

Erasing at 0x100000 --   0% complete.
Erasing at 0x380000 --   1% complete.
Erasing at 0x600000 --   2% complete.
Erasing at 0x8a0000 --   3% complete.
Erasing at 0xb20000 --   4% complete.
Erasing at 0xda0000 --   5% complete.
Erasing at 0x1040000 --   6% complete.
Erasing at 0x12c0000 --   7% complete.
Erasing at 0x1560000 --   8% complete.
Erasing at 0x17e0000 --   9% complete.
Erasing at 0x1a60000 --  10% complete.
Erasing at 0x1d00000 --  11% complete.
Erasing at 0x1f80000 --  12% complete.
Erasing at 0x2220000 --  13% complete.
Erasing at 0x24a0000 --  14% complete.
Erasing at 0x2720000 --  15% complete.
Erasing at 0x29c0000 --  16% complete.
Erasing at 0x2c40000 --  17% complete.
Erasing at 0x2ee0000 --  18% complete.
Erasing at 0x3160000 --  19% complete.
Erasing at 0x33e0000 --  20% complete.
Erasing at 0x3680000 --  21% complete.
Erasing at 0x3900000 --  22% complete.
Erasing at 0x3ba0000 --  23% complete.
Erasing at 0x3e20000 --  24% complete.
Erasing at 0x40a0000 --  25% complete.
Erasing at 0x4340000 --  26% complete.
Erasing at 0x45c0000 --  27% complete.
Erasing at 0x4860000 --  28% complete.
Erasing at 0x4ae0000 --  29% complete.
Erasing at 0x4d60000 --  30% complete.
Erasing at 0x5000000 --  31% complete.
Erasing at 0x5280000 --  32% complete.
Erasing at 0x5520000 --  33% complete.
Erasing at 0x57a0000 --  34% complete.
Erasing at 0x5a20000 --  35% complete.
Erasing at 0x5cc0000 --  36% complete.
Erasing at 0x5f40000 --  37% complete.
Erasing at 0x61e0000 --  38% complete.
Erasing at 0x6460000 --  39% complete.
Erasing at 0x66e0000 --  40% complete.
Erasing at 0x6980000 --  41% complete.
Erasing at 0x6c00000 --  42% complete.
Erasing at 0x6ea0000 --  43% complete.
Erasing at 0x7120000 --  44% complete.
Erasing at 0x73a0000 --  45% complete.
Erasing at 0x7640000 --  46% complete.
Erasing at 0x78c0000 --  47% complete.
Erasing at 0x7b60000 --  48% complete.
Erasing at 0x7de0000 --  49% complete.
Erasing at 0x8060000 --  50% complete.
Erasing at 0x8300000 --  51% complete.
Erasing at 0x8580000 --  52% complete.
Erasing at 0x8820000 --  53% complete.
Erasing at 0x8aa0000 --  54% complete.
Erasing at 0x8d20000 --  55% complete.
Erasing at 0x8fc0000 --  56% complete.
Erasing at 0x9240000 --  57% complete.
Erasing at 0x94e0000 --  58% complete.
Erasing at 0x9760000 --  59% complete.
Erasing at 0x99e0000 --  60% complete.
Erasing at 0x9c80000 --  61% complete.
Erasing at 0x9f00000 --  62% complete.
Erasing at 0xa1a0000 --  63% complete.
Erasing at 0xa420000 --  64% complete.
Erasing at 0xa6a0000 --  65% complete.
Erasing at 0xa940000 --  66% complete.
Erasing at 0xabc0000 --  67% complete.
Erasing at 0xae60000 --  68% complete.
Erasing at 0xb0e0000 --  69% complete.
Erasing at 0xb360000 --  70% complete.
Erasing at 0xb600000 --  71% complete.
Erasing at 0xb880000 --  72% complete.
Erasing at 0xbb20000 --  73% complete.
Erasing at 0xbda0000 --  74% complete.
Erasing at 0xc020000 --  75% complete.
Erasing at 0xc2c0000 --  76% complete.
Erasing at 0xc540000 --  77% complete.
Erasing at 0xc7e0000 --  78% complete.
Erasing at 0xca60000 --  79% complete.
Erasing at 0xcce0000 --  80% complete.
Erasing at 0xcf80000 --  81% complete.
Erasing at 0xd200000 --  82% complete.
Erasing at 0xd4a0000 --  83% complete.
Erasing at 0xd720000 --  84% complete.
Erasing at 0xd9a0000 --  85% complete.
Erasing at 0xdc40000 --  86% complete.
Erasing at 0xdec0000 --  87% complete.
Erasing at 0xe160000 --  88% complete.
Erasing at 0xe3e0000 --  89% complete.
Erasing at 0xe660000 --  90% complete.
Erasing at 0xe900000 --  91% complete.
Erasing at 0xeb80000 --  92% complete.
Erasing at 0xee20000 --  93% complete.
Erasing at 0xf0a0000 --  94% complete.
Erasing at 0xf320000 --  95% complete.
Erasing at 0xf5c0000 --  96% complete.
Erasing at 0xf840000 --  97% complete.
Erasing at 0xfae0000 --  98% complete.
Erasing at 0xfd60000 --  99% complete.
Skipping bad block at  0x0ff00000                                          

Skipping bad block at  0x0ff20000                                          

Skipping bad block at  0x0ff40000                                          

Skipping bad block at  0x0ff60000                                          

Skipping bad block at  0x0ff80000                                          

Skipping bad block at  0x0ffa0000                                          

Skipping bad block at  0x0ffc0000                                          

Skipping bad block at  0x0ffe0000                                          

OK

NAND scrub: device 0 offset 0xff80000, size 0x80000
Warning: scrub option will erase all factory set bad blocks!
         There is no reliable way to recover them.
         Use this command only for testing purposes if you
         are sure of what you are doing!

Really scrub this NAND flash? <y/N>
y


Erasing at 0xff80000 --  25% complete.
Erasing at 0xffa0000 --  50% complete.
Erasing at 0xffc0000 --  75% complete.
Erasing at 0xffe0000 -- 100% complete.
OK

Device 0 bad blocks:
Bad block table not found for chip 0
Bad block table not found for chip 0
Scanning device for bad blocks
Bad block table written to 0x00000ffe0000, version 0x01
Bad block table written to 0x00000ffc0000, version 0x01
  0ff00000
  0ff20000
  0ff40000
  0ff60000
  0ff80000
  0ffa0000
  0ffc0000
  0ffe0000
=> setenv bootargs 'console=ttyS0,115200 mtdparts=pxa3xx_nand-0:1m(uboot),-(ubi0)'
=> setenv bootcmd 'tftpboot $loadaddr skny/triax/zImage; tftpboot $rdaddr skny/triax/cpiou; tftpboot $fdtaddr skny/triax/dtb; bootz $loadaddr $rdaddr $fdtaddr'
=> setenv loadaddr 0x2000000
=> setenv rdaddr 0x2400000
=> setenv fdtaddr 0x3b00000
=> setenv ethaddr de:f5:81:e0:28:d8
=> setenv ipaddr 172.16.11.42
=> setenv serverip 172.16.10.35
=> boot
Using ethernet@30000 device
TFTP from server 172.16.10.35; our IP address is 172.16.11.42
Filename 'skny/triax/zImage'.
Load address: 0x2000000
Loading: *#################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 ########
	 4.5 MiB/s
done
Bytes transferred = 3926064 (3be830 hex)
Using ethernet@30000 device
TFTP from server 172.16.10.35; our IP address is 172.16.11.42
Filename 'skny/triax/cpiou'.
Load address: 0x2400000
Loading: *#################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 ###########################################
	 4.4 MiB/s
done
Bytes transferred = 11116879 (a9a14f hex)
Using ethernet@30000 device
TFTP from server 172.16.10.35; our IP address is 172.16.11.42
Filename 'skny/triax/dtb'.
Load address: 0x3b00000
Loading: *##
	 3.1 MiB/s
done
Bytes transferred = 16402 (4012 hex)
## Loading init Ramdisk from Legacy Image at 02400000 ...
   Image Name:   rescue-rootfs-output-module-20171120
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    11116815 Bytes = 10.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 03b00000
   Booting using the fdt blob at 0x3b00000
   Using Device Tree in place at 03b00000, end 03b07011

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.15.0-rc1-00094-g1791eb8f2475-dirty (skn@skn) (gcc version 7.2.0 (Arch Repository)) #33 SMP PREEMPT Wed Dec 13 07:06:23 CET 2017
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Triax DVB-TC Output
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] percpu: Embedded 16 pages/cpu @ef7cd000 s36684 r8192 d20660 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260608
[    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=pxa3xx_nand-0:1m(uboot),-(ubi0)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1018760K/1048576K available (6144K kernel code, 385K rwdata, 1344K rodata, 1024K init, 155K bss, 29816K reserved, 0K cma-reserved, 262144K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0700000   (7136 kB)
[    0.000000]       .init : 0xc0900000 - 0xc0a00000   (1024 kB)
[    0.000000]       .data : 0xc0a00000 - 0xc0a606c0   ( 386 kB)
[    0.000000]        .bss : 0xc0a606c0 - 0xc0a875e4   ( 156 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000009] sched_clock: 64 bits at 533MHz, resolution 1ns, wraps every 2199023255551ns
[    0.000023] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x7aed16d152, max_idle_ns: 440795225656 ns
[    0.000042] Switching to timer-based delay loop, resolution 1ns
[    0.000201] Ignoring duplicate/late registration of read_current_timer delay
[    0.000212] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000547] Console: colour dummy device 80x30
[    0.000565] Calibrating delay loop (skipped), value calculated using timer frequency.. 1066.00 BogoMIPS (lpj=5330000)
[    0.000575] pid_max: default: 32768 minimum: 301
[    0.000655] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000665] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001029] CPU: Testing write buffer coherency: ok
[    0.001189] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.040130] Setting up static identity map for 0x100000 - 0x100060
[    0.040225] mvebu-soc-id: MVEBU SoC ID=0x6810, Rev=0x4
[    0.040318] mvebu-pmsu: Initializing Power Management Service Unit
[    0.060104] Hierarchical SRCU implementation.
[    0.100103] smp: Bringing up secondary CPUs ...
[    0.170163] Booting CPU 1
[    1.200099] CPU1: failed to come online
[    1.200151] smp: Brought up 1 node, 1 CPU
[    1.200158] SMP: Total of 1 processors activated (1066.00 BogoMIPS).
[    1.200163] CPU: All CPU(s) started in SVC mode.
[    1.200695] devtmpfs: initialized
[    1.202488] random: get_random_u32 called from bucket_table_alloc+0x114/0x240 with crng_init=0
[    1.202530] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    1.202702] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    1.202714] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.202808] pinctrl core: initialized pinctrl subsystem
[    1.203192] NET: Registered protocol family 16
[    1.203811] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    1.204347] cpuidle: using governor ladder
[    1.204402] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    1.204408] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    1.204535] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    1.204544] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    1.240378] SCSI subsystem initialized
[    1.250456] random: fast init done
[    1.260174] clocksource: Switched to clocksource arm_global_timer
[    1.283104] NET: Registered protocol family 2
[    1.283487] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.283545] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.283640] TCP: Hash tables configured (established 8192 bind 8192)
[    1.283720] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.283757] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.283877] NET: Registered protocol family 1
[    1.304156] RPC: Registered named UNIX socket transport module.
[    1.304163] RPC: Registered udp transport module.
[    1.304168] RPC: Registered tcp transport module.
[    1.304172] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.304306] Trying to unpack rootfs image as initramfs...
[    1.835333] Freeing initrd memory: 10860K
[    1.835618] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.836497] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[    1.847900] bounce: pool size: 64 pages
[    1.847933] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.847940] io scheduler noop registered
[    1.847945] io scheduler deadline registered
[    1.847979] io scheduler cfq registered (default)
[    1.847985] io scheduler mq-deadline registered
[    1.847990] io scheduler kyber registered
[    1.848718] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    1.850320] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[    1.850331] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    1.850339] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    1.850347] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.850523] PCI: bus0: Fast back to back transfers disabled
[    1.850533] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.850597] PCI: bus1: Fast back to back transfers enabled
[    1.850623] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.850938] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.910665] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    1.910809] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.970658] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    1.994106] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.995167] console [ttyS0] disabled
[    2.015302] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 15625000) is a 16550A
[    2.687827] console [ttyS0] enabled
[    2.696096] brd: module loaded
[    2.699894] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    2.706311] nand: Micron MT29F2G08ABAEAH4
[    2.710358] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    2.718019] nand: NAND_ECC_NONE selected by board driver. This is not recommended!
[    2.725646] nand: WARNING: pxa3xx_nand-0: the ECC used on your system is too weak compared to the one required by the NAND chip
[    2.737193] Scanning device for bad blocks
[    2.886460] 2 cmdlinepart partitions found on MTD device pxa3xx_nand-0
[    2.893016] Creating 2 MTD partitions on "pxa3xx_nand-0":
[    2.898437] 0x000000000000-0x000000100000 : "uboot"
[    2.903816] 0x000000100000-0x000010000000 : "ubi0"
[    2.913428] libphy: Fixed MDIO Bus: probed
[    2.917857] libphy: orion_mdio_bus: probed
[    2.922211] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    2.931460] mvneta f1030000.ethernet eth0: Using hardware mac address de:f5:81:e0:28:d8
[    2.940244] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[    2.947865] i2c /dev entries driver
[    2.962020] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.974588] orion_wdt: Initial timeout 171 sec
[    2.980555] marvell-cesa f1090000.crypto: CESA device successfully registered
[    2.988159] NET: Registered protocol family 10
[    3.003213] Segment Routing with IPv6
[    3.006933] NET: Registered protocol family 17
[    3.011501] ThumbEE CPU extension supported.
[    3.015788] Registering SWP/SWPB emulation handler
[    3.022321] armada38x-rtc f10a3800.rtc: setting system clock to 2097-01-10 06:02:22 UTC (4008636142)
[    3.032881] Freeing unused kernel memory: 1024K

INIT: version 2.88 booting

Starting udev
[    3.262374] udevd[88]: starting version 3.2.1
[    3.277083] udevd[89]: starting eudev-3.2.1
Starting ifplugd:  eth0

[    3.829725] mvneta f1030000.ethernet eth0: configuring for fixed/sgmii link mode
[    3.842644] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.848534] mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[    3.865975] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mon Nov 20 12:39:11 UTC 2017


INIT: Entering runlevel: 5


Configuring network interfaces... done.

Starting system message bus: dbus.

Starting OpenBSD Secure Shell server: sshd

  generating ssh RSA key...

  generating ssh ECDSA key...

  generating ssh DSA key...

  generating ssh ED25519 key...

done.

Slot: Unknown


PIL/basic pil-2017.07-3-gcbd7a4f-dirty output-module /dev/ttyS0



output-module login: root
Password: 

root@output-module:~# 
root@output-module:~# nanddump -nop --bb=dumpbad /dev/mtd1 | grep -i "4d 56"
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x0ff00000...
0x07f7ac20: 00 53 6f 43 3a 20 20 20 00 4d 56 37 38 32 33 30
0x07f7ac30: 2d 00 4d 56 37 38 32 36 30 2d 00 4d 56 37 38 34
0x07f7ac40: 36 30 2d 00 4d 56 38 38 46 36 37 32 30 2d 00 4d
0x07f7ac50: 56 38 38 46 36 38 31 30 2d 00 4d 56 38 38 46 36
0x07f7ac60: 38 32 30 2d 00 4d 56 38 38 46 36 38 32 38 2d 00
0x07f85b50: 00 00 00 00 22 7b 86 00 42 62 74 30 4d 56 42 62
libmtd: error!: cannot read 2048 bytes from mtd1 (eraseblock 2039, offset 129024)
        error 22 (Invalid argument)
nanddump: error!: mtd_read
root@output-module:~#