———————————————————
>>>СКАЧАТЬ<<<
———————————————————
Download link
———————————————————
Настройка d-link dgs-1224t
Add a Trunking Name and select the ports to be trunked together, and click Apply to activate the selected Trunking groups. If a report message is received before above timer expires, the Leave message is dropped. Link Status: Reporting Down indicates the port is disconnected. Не умеет сторожить привязку MAC: к портам - привязать можно, а вот определить реакцию настройка d-link dgs-1224t чужой MAC на порту - нельзя. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802. By default, Trap Setting is Disabled. To see the list of web browsers the Web-based Utility supports, see Supported web browsers on page 20. By default DHCP is disabled.
SNMP defines both the format of the MIB specifications and the protocol used to access this information over the network. Figure 17 — Tool Menu Reset: Provides a safe reset option for the Switch. Front Panel The figure below shows the front panel of the Switch. Rename: Press to rename the VLAN group. A timer is started with a time interval equal to IgsLeaveProcessInterval.
Link Status: Reporting Down indicates the port is disconnected. This enables network managers to better monitor настройка d-link dgs-1224t performances. BPDU packets are sent even if a BPDU packet was not received. By selecting a range of ports From Port and To Portthe Speed and Flow Control can be set for all such ports, by clicking Apply. Monitor List All Web-Smart devices in the Monitor List can be monitored, with Trap information available to be received for monitoring status information of the device. Discovery List This is the list where all Web-Smart devices on the network are discovered.
Настройка d-link dgs-1224t
To print the manual completely, please, it. Add a Trunking Name and select the ports to be trunked together, and click Apply to activate the selected Trunking groups. SNMP defines both the format of the MIB specifications and the protocol used to access this information over the network. By pressing the Discovery button, all the Web-Smart devices are listed in the discovery list.
Default is 10 seconds. Тормознутый веб интерфейс - лучше бы выкинули графику, но грузилось бы быстрее. If Enabled, the IGMP Global Settings will need to be entered: Query Interval 60-600 sec : The Query Interval is the interval between General Queries sent.