-
-
Save anonymous/41ccb09030005acb7f89 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
DDR Version 1.04 20130517 | |
In | |
DDR3 | |
300MHz | |
Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
Memory OK | |
OUT | |
BUILD=====6 | |
F:32 1061 2 0 40 | |
GetRemapTbl flag = 0 | |
OK! 54999 | |
unsigned! | |
SecureBootEn = 0 0 | |
Boot ver: 2013-06-20#1.24 | |
start_linux=====66694 | |
119682 Starting kernel...@0x60408000 | |
barebox 2014.04.0-00208-g43d92a9 #1048 Sun Apr 27 09:28:07 CEST 2014 | |
Board: Radxa Rock | |
arc-emac 10204000.ethernet: ARC EMAC detected with id: 0x7fd02 | |
mdio_bus: miibus0: probed | |
i2c-gpio i2c-gpio0: using pins 58 (SDA) and 59 (SCL) | |
malloc space: 0x64000000 -> 0x67ffffff (size 64 MiB) | |
Open /dev/env0 No such file or directory | |
no valid environment found on /dev/env0. Using default environment | |
running /env/bin/init... | |
Hit any key to stop autoboot: 1 | |
barebox@Radxa Rock:/ devinfo | |
devices: | |
`---- global | |
`---- platform | |
`---- mem0 | |
`---- 0x00000000-0x7fffffff: /dev/ram0 | |
`---- soc.0 | |
`---- 1013c000.scu | |
`---- 20004000.pmu | |
`---- 1013d000.interrupt-controller | |
`---- 10138000.l2-cache-controller | |
`---- 1013c200.global-timer | |
`---- 1013c600.local-timer | |
`---- 20064000.serial | |
`---- cs0 | |
`---- 10080000.sram | |
`---- 10204000.ethernet | |
`---- miibus0 | |
`---- eth0 | |
`---- 20008000.pinctrl | |
`---- mem1 | |
`---- 0x00000000-0xfffffffe: /dev/mem | |
`---- i2c-gpio0 | |
`---- i2c0 | |
`---- act88460 | |
`---- 0x00000000-0x0000003f: /dev/act8846 | |
`---- mdio_bus | |
`---- spi | |
`---- i2c | |
`---- fs | |
`---- ramfs0 | |
`---- devfs0 | |
`---- net | |
drivers: | |
ns16550_serial | |
rockchip-pinctrl | |
smp_twd | |
ramfs | |
devfs | |
tftp | |
SMSC LAN83C185 | |
SMSC LAN8187 | |
SMSC LAN8700 | |
SMSC LAN911x Internal PHY | |
SMSC LAN8710/LAN8720 | |
Generic PHY | |
arc-emac | |
i2c-gpio | |
act8846 | |
gpio-leds | |
mem | |
barebox-environment | |
barebox@Radxa Rock:/ boot | |
booting net | |
warning: No MAC address set. Using random address 5E:9C:5D:C2:C7:53 | |
100Mbps full duplex link detected | |
T DHCP client bound to address 192.168.10.100 | |
Loading OS arm Linux zImage '/mnt/tftp/none-linux-radxa-rock' | |
Loading devicetree from '/mnt/tftp/none-oftree-radxa-rock' | |
commandline: console=ttyS2,115200 | |
booting kernel with devicetree | |
Uncompressing Linux... done, booting the kernel. | |
Booting Linux on physical CPU 0x0 | |
Linux version 3.15.0-rc2+ (b@sark) (gcc version 4.7.2 (Debian 4.7.2-5) ) #379 SMP Sat Apr 26 16:00:36 CEST 2014 | |
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
Machine model: Radxa Rock | |
bootconsole [earlycon0] enabled | |
Memory policy: Data cache writealloc | |
PERCPU: Embedded 7 pages/cpu @ee7c6000 s7680 r8192 d12800 u32768 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
Kernel command line: console=ttyS2,115200 earlyprintk init=/init | |
PID hash table entries: 4096 (order: 2, 16384 bytes) | |
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
Memory: 2074864K/2097152K available (2591K kernel code, 131K rwdata, 740K rodata, 1203K init, 209K bss, 22288K reserved, 1318912K highmem) | |
Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
.text : 0xc0008000 - 0xc0348f34 (3332 kB) | |
.init : 0xc0349000 - 0xc0475e00 (1204 kB) | |
.data : 0xc0476000 - 0xc0496e50 ( 132 kB) | |
.bss : 0xc0496e58 - 0xc04cb594 ( 210 kB) | |
Hierarchical RCU implementation. | |
NR_IRQS:16 nr_irqs:16 16 | |
sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
Console: colour dummy device 80x30 | |
Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
CPU: Testing write buffer coherency: ok | |
Setting up static identity map for 0x6028dea0 - 0x6028def8 | |
CPU1: Booted secondary processor | |
CPU2: Booted secondary processor | |
CPU3: Booted secondary processor | |
Brought up 4 CPUs | |
SMP: Total of 4 processors activated. | |
CPU: All CPU(s) started in SVC mode. | |
devtmpfs: initialized | |
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
pinctrl core: initialized pinctrl subsystem | |
regulator-dummy: no parameters | |
NET: Registered protocol family 16 | |
DMA: preallocated 256 KiB pool for atomic coherent allocations | |
cpuidle: using governor ladder | |
cpuidle: using governor menu | |
L310 cache controller enabled | |
l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 512 kB | |
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
hw-breakpoint: maximum watchpoint size is 4 bytes. | |
SCSI subsystem initialized | |
Switched to clocksource arm_global_timer | |
NET: Registered protocol family 2 | |
TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
TCP: Hash tables configured (established 8192 bind 8192) | |
TCP: reno registered | |
UDP hash table entries: 512 (order: 2, 16384 bytes) | |
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
NET: Registered protocol family 1 | |
futex hash table entries: 1024 (order: 4, 65536 bytes) | |
bounce pool size: 64 pages | |
msgmni has been set to 1476 | |
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) | |
io scheduler noop registered | |
io scheduler deadline registered (default) | |
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
console [ttyS2] disabled | |
20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
console [ttyS2] enabled | |
console [ttyS2] enabled | |
bootconsole [earlycon0] disabled | |
bootconsole [earlycon0] disabled | |
20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
brd: module loaded | |
mousedev: PS/2 mouse device common for all mice | |
Synopsys Designware Multimedia Card Interface Driver | |
TCP: cubic registered | |
NET: Registered protocol family 17 | |
input: gpio-keys.1 as /devices/soc.0/gpio-keys.1/input/input0 | |
Freeing unused kernel memory: 1200K (c0349000 - c0475000) | |
mknod: /dev/null: File exists | |
/ # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment