Created
January 16, 2013 08:59
-
-
Save anonymous/4545691 to your computer and use it in GitHub Desktop.
Kernel
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| <6>Booting Linux on physical CPU 0 | |
| <6>Initializing cgroup subsys cpu | |
| <5>Linux version 3.1.0-R58-Siyah-Dorimanx-V7.40-ICS-JB-SGII-PWR-CORE (root@dorimanx-virtual-machine) (gcc version 4.7.3 20121106 (prerelease) (Linaro GCC 4.7-2012.11) ) #1 SMP PREEMPT Wed Jan 16 03:20:10 IST 2013 | |
| <4>CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d | |
| <4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| <4>Machine: SMDK4210 | |
| <4>Memory policy: ECC disabled, Data cache writealloc | |
| <4>CPU EXYNOS4210 (id 0x43210211) | |
| <7>exynos4_init_clocks: initializing clocks | |
| <6>S3C24XX Clocks, Copyright 2004 Simtec Electronics | |
| <3>s3c_register_clksrc: clock audiocdclk has no registers set | |
| <3>audiocdclk: no parent clock specified | |
| <3>s3c_register_clksrc: clock armclk has no registers set | |
| <7>exynos4_setup_clocks: registering clocks | |
| <7>exynos4_setup_clocks: xtal is 24000000 | |
| <6>EXYNOS4: PLL settings, A=800000000, M=800000000, E=180633605 V=300000000 | |
| <6>EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=200000000 | |
| <6>ACLK160=160000000, ACLK133=133333333, ACLK100=100000000 | |
| <6>uclk1: source is mout_mpll (6), rate is 200000000 | |
| <6>uclk1: source is mout_mpll (6), rate is 200000000 | |
| <6>uclk1: source is mout_mpll (6), rate is 100000000 | |
| <6>uclk1: source is mout_mpll (6), rate is 100000000 | |
| <6>sclk_csis: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_csis: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_cam0: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_cam1: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_fimc: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_fimc: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_fimc: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_fimc: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_fimd: source is mout_mpll (6), rate is 50000000 | |
| <6>sclk_fimd: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_mdnie: source is mout_mpll (6), rate is 50000000 | |
| <6>sclk_mdnie: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_mdnie_pwm: source is xusbxti (1), rate is 24000000 | |
| <6>sclk_mfc: source is mout_mfc0 (0), rate is 100000000 | |
| <6>sclk_g3d: source is mout_g3d0 (0), rate is 100000000 | |
| <6>sclk_pwi: source is xusbxti (1), rate is 12000000 | |
| <6>[cma_region_descriptor_add] adding [pmem] (0x71bf4000)-(0x00400000) | |
| <6>S5P/CMA: Reserved 0x71bf4000/0x00400000 for 'pmem' | |
| <6>[cma_region_descriptor_add] adding [pmem_gpu1] (0x71bf3000)-(0x00001000) | |
| <6>S5P/CMA: Reserved 0x71bf3000/0x00001000 for 'pmem_gpu1' | |
| <6>[cma_region_descriptor_add] adding [fimd] (0x7103b000)-(0x00bb8000) | |
| <6>S5P/CMA: Reserved 0x7103b000/0x00bb8000 for 'fimd' | |
| <6>[cma_region_descriptor_add] adding [fimc0] (0x70b3b000)-(0x00500000) | |
| <6>S5P/CMA: Reserved 0x70b3b000/0x00500000 for 'fimc0' | |
| <6>[cma_region_descriptor_add] adding [fimc1] (0x6eb5a000)-(0x01fe1000) | |
| <6>S5P/CMA: Reserved 0x6eb5a000/0x01fe1000 for 'fimc1' | |
| <6>[cma_region_descriptor_add] adding [fimc2] (0x6d25a000)-(0x01900000) | |
| <6>S5P/CMA: Reserved 0x6d25a000/0x01900000 for 'fimc2' | |
| <6>[cma_region_descriptor_add] adding [fimc3] (0x6cb5a000)-(0x00700000) | |
| <6>S5P/CMA: Reserved 0x6cb5a000/0x00700000 for 'fimc3' | |
| <6>[cma_region_descriptor_add] adding [ion] (0x6855a000)-(0x04600000) | |
| <6>S5P/CMA: Reserved 0x6855a000/0x04600000 for 'ion' | |
| <6>[cma_region_descriptor_add] adding [mfc1] (0x66340000)-(0x02200000) | |
| <6>S5P/CMA: Reserved 0x66340000/0x02200000 for 'mfc1' | |
| <6>[cma_region_descriptor_add] adding [mfc0] (0x64f40000)-(0x01400000) | |
| <6>S5P/CMA: Reserved 0x64f40000/0x01400000 for 'mfc0' | |
| <6>[cma_region_descriptor_add] adding [jpeg] (0x63b40000)-(0x01400000) | |
| <6>S5P/CMA: Reserved 0x63b40000/0x01400000 for 'jpeg' | |
| <6>[cma_region_descriptor_add] adding [srp] (0x63a40000)-(0x00100000) | |
| <6>S5P/CMA: Reserved 0x63a40000/0x00100000 for 'srp' | |
| <6>[cma_region_descriptor_add] adding [tvout] (0x62a40000)-(0x01000000) | |
| <6>S5P/CMA: Reserved 0x62a40000/0x01000000 for 'tvout' | |
| <7>On node 0 totalpages: 262144 | |
| <7>free_area_init_node: node 0, pgdat c1214d40, node_mem_map c160c000 | |
| <7> Normal zone: 1600 pages used for memmap | |
| <7> Normal zone: 0 pages reserved | |
| <7> Normal zone: 203200 pages, LIFO batch:31 | |
| <7> HighMem zone: 448 pages used for memmap | |
| <7> HighMem zone: 56896 pages, LIFO batch:15 | |
| <6>PERCPU: Embedded 8 pages/cpu @c1e12000 s9184 r8192 d15392 u32768 | |
| <7>pcpu-alloc: s9184 r8192 d15392 u32768 alloc=8*4096 | |
| <7>pcpu-alloc: [0] 0 [0] 1 | |
| <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 | |
| <5>Kernel command line: loglevel=4 console=ram androidboot.serialno=00092ec73a485f sec_debug.enable=0 sec_debug.enable_user=0 c1_watchdog.sec_pet=5 sec_log=0x100000@0x4d900000 s3cfb.bootloaderfb=0x5ec00000 ld9040.get_lcdtype=0x2 consoleblank=0 lpj=3981312 vmalloc=144m | |
| <6>PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| <6>Memory: 1024MB = 1024MB total | |
| <5>Memory: 765396k/765396k available, 283180k reserved, 229376K highmem | |
| <5>Virtual kernel memory layout: | |
| <5> vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| <5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
| <5> DMA : 0xfea00000 - 0xffe00000 ( 20 MB) | |
| <5> vmalloc : 0xf2800000 - 0xfb000000 ( 136 MB) | |
| <5> lowmem : 0xc0000000 - 0xf2000000 ( 800 MB) | |
| <5> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| <5> modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| <5> .init : 0xc0008000 - 0xc0a4a000 (10504 kB) | |
| <5> .text : 0xc0a4a000 - 0xc111f000 (6996 kB) | |
| <5> .data : 0xc1120000 - 0xc1215a80 ( 983 kB) | |
| <5> .bss : 0xc1215ac0 - 0xc160b234 (4054 kB) | |
| <6>SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| <6>Preemptible hierarchical RCU implementation. | |
| <6> RCU dyntick-idle grace-period acceleration is enabled. | |
| <6> Dump stacks of tasks blocking RCU-preempt GP. | |
| <6>NR_IRQS:493 | |
| <6>Console: colour dummy device 80x30 | |
| <6>Calibrating delay loop (skipped) preset value.. 2389.32 BogoMIPS (lpj=3981312) | |
| <6>pid_max: default: 32768 minimum: 301 | |
| <6>Mount-cache hash table entries: 512 | |
| <6>Initializing cgroup subsys freezer | |
| <6>Initializing cgroup subsys bfqio | |
| <6>Initializing cgroup subsys timer_slack | |
| <6>CPU: Testing write buffer coherency: ok | |
| <6>CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 | |
| <6>Setting up static identity map for 0x40f64328 - 0x40f64340 | |
| <6>L310 cache controller enabled | |
| <6>l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B | |
| <6>CPU1: Booted secondary processor | |
| <6>CPU1: thread -1, cpu 1, socket 9, mpidr 80000901 | |
| <6>Brought up 2 CPUs | |
| <6>SMP: Total of 2 processors activated (4779.64 BogoMIPS). | |
| <6>print_constraints: dummy: | |
| <6>NET: Registered protocol family 16 | |
| <6>universal_tsp_init touch : 356 | |
| <6>smdkc210_machine_init() register sii9234 driver | |
| <6>Registered chained gpio int handler for interrupt 110. | |
| <6>Registered interrupt support for gpio group 20. | |
| <6>s5p_gpioint_set_type irq:389 is at GPL0(5) | |
| <7>usb: smdkc210_usbgadget_init: default luns=0, new luns=2 | |
| <7>usb: smdkc210_usbgadget_init tune_mask=0x10380f, tune=0x10280b | |
| <6>ld9040_fb_init :: lcdtype=2 | |
| <6>brcm_wlan_init: start | |
| <6>brcm_init_wlan_mem: WIFI MEM Allocated | |
| <6>exynos4_pmu_init: PMU supports 4210(71) | |
| <6>S3C Power Management, Copyright 2004 Simtec Electronics | |
| <6>EXYNOS4: Initializing architecture | |
| <6>s3c-adc samsung-adc-v3: attached adc driver | |
| <6>samsung-pd samsung-pd.0: power domain registered | |
| <6>samsung-pd samsung-pd.1: power domain registered | |
| <6>samsung-pd samsung-pd.2: power domain registered | |
| <6>lcd0 disable skip only one time | |
| <6>samsung-pd samsung-pd.3: power domain registered | |
| <6>samsung-pd samsung-pd.5: power domain registered | |
| <6>samsung-pd samsung-pd.4: power domain registered | |
| <6>samsung-pd samsung-pd.6: power domain registered | |
| <6>s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0 | |
| <6>s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8 | |
| <6>s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12 | |
| <6>s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16 | |
| <4>UMP: UMP device driver loaded | |
| <6>s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0. | |
| <6>s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1. | |
| <6>s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2. | |
| <6>s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3. | |
| <6>s5p-sysmmu s5p-sysmmu.9: Initialized for s5p-fimg2d. | |
| <6>s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout. | |
| <6>s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc. | |
| <6>s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc. | |
| <4>------------[ cut here ]------------ | |
| <4>WARNING: at fs/sysfs/dir.c:474 sysfs_add_one+0x88/0xbc() | |
| <4>sysfs: cannot create duplicate filename '/module/mali/version' | |
| <4>Modules linked in: | |
| <4>Backtrace: no frame pointer | |
| <4>---[ end trace 1b75b31a2719ed1c ]--- | |
| <6>bio: create slab <bio-0> at 0 | |
| <5>SCSI subsystem initialized | |
| <6>usbcore: registered new interface driver usbfs | |
| <6>usbcore: registered new interface driver hub | |
| <6>usbcore: registered new device driver usb | |
| <6>i2c-gpio i2c-gpio.8: using pins 91 (SDA) and 89 (SCL) | |
| <6>i2c-gpio i2c-gpio.9: using pins 163 (SDA) and 164 (SCL) | |
| <6>i2c-gpio i2c-gpio.11: using pins 99 (SDA) and 107 (SCL) | |
| <6>i2c-gpio i2c-gpio.14: using pins 136 (SDA) and 135 (SCL) | |
| <6>i2c-gpio i2c-gpio.12: using pins 31 (SDA) and 33 (SCL) | |
| <6>i2c-gpio i2c-gpio.15: using pins 154 (SDA) and 156 (SCL) | |
| <6>i2c-gpio i2c-gpio.16: using pins 18 (SDA) and 19 (SCL) | |
| <6>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter | |
| <6>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter | |
| <6>s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter | |
| <6>max8997 5-0066: max8997_irq_init: PMIC ID(0x77) | |
| <6>max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck1: 1350000, i:28 | |
| <6>max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck2: 1150000, i:20 | |
| <6>max8997-pmic max8997-pmic: max8997_set_buck_max_voltage: buck5: 1200000, i:22 | |
| <6>max8997-pmic max8997-pmic: RAMP REG(0xf9) | |
| <6>print_constraints: VADC_3.3V_C210: 3300 mV | |
| <6>print_constraints: VUSB_1.1V: 1100 mV | |
| <6>print_constraints: VMIPI_1.8V: 1800 mV | |
| <6>print_constraints: VHSIC_1.2V: 1200 mV | |
| <6>print_constraints: CAM_ISP_1.8V: 1800 mV | |
| <6>print_constraints: VUSB_3.3V: 3300 mV | |
| <6>print_constraints: VPLL_1.1V: 1100 mV | |
| <6>print_constraints: TOUCH_2.8V: 2800 mV | |
| <6>print_constraints: VT_CAM_1.8V: 1800 mV | |
| <6>print_constraints: VCC_3.0V_LCD: 3000 mV | |
| <6>print_constraints: VCC_2.8V_MOTOR: 2800 mV | |
| <6>print_constraints: LED_A_2.8V: 2800 mV | |
| <6>print_constraints: CAM_SENSOR_IO_1.8V: 1800 mV | |
| <6>print_constraints: VTF_2.8V: 2800 mV | |
| <6>print_constraints: TOUCH_LED_3.3V: 2500 <--> 3300 mV at 3000 mV | |
| <6>print_constraints: VDDQ_M1M2_1.2V: 1200 mV | |
| <6>print_constraints: vdd_arm range: 650 <--> 2225 mV at 1350 mV | |
| <6>print_constraints: vdd_int range: 650 <--> 2225 mV at 1150 mV | |
| <6>print_constraints: G3D_1.1V: 800 <--> 1500 mV at 950 mV | |
| <6>print_constraints: CAM_ISP_CORE_1.2V: 1200 mV | |
| <6>print_constraints: VMEM_1.2V: 1200 mV | |
| <6>print_constraints: VCC_SUB_2.0V: 2000 mV | |
| <6>print_constraints: safeout1 range: | |
| <6>print_constraints: safeout2 range: | |
| <6>print_constraints: FLASH_CUR: 23 <--> 750 mA at 492 mA | |
| <6>print_constraints: MOVIE_CUR: 15 <--> 250 mA at 15 mA | |
| <6>s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter | |
| <6>s3c-i2c s3c2440-i2c.6: i2c-6: S3C I2C adapter | |
| <6>s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter | |
| <6>Advanced Linux Sound Architecture Driver Version 1.0.24. | |
| <6>Bluetooth: Core ver 2.16 | |
| <6>NET: Registered protocol family 31 | |
| <6>Bluetooth: HCI device and connection manager initialized | |
| <6>Bluetooth: HCI socket layer initialized | |
| <6>Bluetooth: L2CAP socket layer initialized | |
| <6>Bluetooth: SCO socket layer initialized | |
| <6>cfg80211: Calling CRDA to update world regulatory domain | |
| <6>Switching to clocksource mct-frc | |
| <6>NET: Registered protocol family 2 | |
| <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) | |
| <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) | |
| <6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) | |
| <6>TCP: Hash tables configured (established 131072 bind 65536) | |
| <6>TCP reno registered | |
| <6>UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| <6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| <6>NET: Registered protocol family 1 | |
| <6>PMU: registered new PMU device of type 0 | |
| <6>FIPS: self-tests for aes-asm (aes) passed | |
| <6>FIPS: self-tests for sha1-asm (sha1) passed | |
| <6>##MUIC [ arch/arm/mach-exynos/sec-switch_max8997.c ]- func : uart_switch_init !! val:-0- | |
| <6>regulator_consumer_probe: loading u1-regulator-consumer | |
| <6>wake enabled for irq 374 | |
| <6>sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading | |
| <6>Loaded driver for PL330 DMAC-0 s3c-pl330 | |
| <6> DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 | |
| <6>Loaded driver for PL330 DMAC-1 s3c-pl330 | |
| <6> DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 | |
| <6>Loaded driver for PL330 DMAC-2 s3c-pl330 | |
| <6> DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 | |
| <4>bounce pool size: 64 pages | |
| <6>ashmem: initialized | |
| <6>fuse init (API version 7.17) | |
| <6>msgmni has been set to 1046 | |
| <6>FIPS: No test for cipher_null (cipher_null-generic) | |
| <6>FIPS: No test for ecb(cipher_null) (ecb-cipher_null) | |
| <6>FIPS: No test for compress_null (compress_null-generic) | |
| <6>FIPS: No test for digest_null (digest_null-generic) | |
| <6>FIPS: self-tests for non-FIPS md4-generic (md4) passed | |
| <6>FIPS: self-tests for non-FIPS md5-generic (md5) passed | |
| <6>FIPS: self-tests for sha1-generic (sha1) passed | |
| <6>FIPS: self-tests for sha256-generic (sha256) passed | |
| <6>FIPS: self-tests for sha224-generic (sha224) passed | |
| <6>FIPS: self-tests for sha512-generic (sha512) passed | |
| <6>FIPS: self-tests for sha384-generic (sha384) passed | |
| <6>FIPS: self-tests for des-generic (des) passed | |
| <6>FIPS: self-tests for des3_ede-generic (des3_ede) passed | |
| <6>FIPS: self-tests for non-FIPS twofish-generic (twofish) passed | |
| <6>FIPS: self-tests for aes-generic (aes) passed | |
| <6>FIPS: self-tests for non-FIPS arc4-generic (arc4) passed | |
| <6>FIPS: self-tests for non-FIPS ecb(arc4)-generic (ecb(arc4)) passed | |
| <6>FIPS: self-tests for non-FIPS deflate-generic (deflate) passed | |
| <6>FIPS: self-tests for crc32c-generic (crc32c) passed | |
| <6>FIPS: No test for stdrng (krng) | |
| <6>FIPS: self-tests for ansi_cprng (stdrng) passed | |
| <6>FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng) | |
| <6>FIPS: self-tests for non-FIPS ghash-generic (ghash) passed | |
| <6>io scheduler noop registered | |
| <6>io scheduler deadline registered | |
| <6>io scheduler cfq registered | |
| <6>io scheduler sio registered | |
| <6>io scheduler row registered | |
| <6>io scheduler vr registered | |
| <6>io scheduler bfq registered | |
| <6>io scheduler zen registered (default) | |
| <3>s3cfb s3cfb.0: div(32) max should be 16 | |
| <6>s3cfb s3cfb.0: vclk=25067520, div=32(16), rate=50000000 | |
| <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff | |
| <6>s3cfb s3cfb.0: [fb2] dma: 0x7103b000, cpu: 0xf2899000, size: 0x002ee000 | |
| <6>Bootloader sent 'bootloaderfb' : 5EC00000 | |
| <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2 | |
| <6>s3cfb s3cfb.0: registered successfully | |
| <6>mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, STANDARD_UI | |
| <6>mdnie mdnie: NORMAL | |
| <6>mdnie mdnie: registered successfully | |
| <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| <6>s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10 | |
| <6>s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10 | |
| <6>s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10 | |
| <6>s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10 | |
| <6>loop: module loaded | |
| <6>zram: num_devices not specified. Using default: 1 | |
| <6>zram: Creating 3 devices ... | |
| <6>pmem: 0 init | |
| <6>pmem_gpu1: 0 init | |
| <6>sec_jack_probe : Registering jack driver | |
| <6>wake enabled for irq 378 | |
| <6>input: max8997-muic as /devices/platform/s3c2440-i2c.5/i2c-5/5-0066/max8997-muic/input/input0 | |
| <6>max8997_muic_cfg_uart_gpio: path=0 | |
| <6>max8997-muic max8997-muic: max8997_muic_set_adcdbset: ADCDBSET(0x20) | |
| <6>Loading pn544 driver | |
| <6>pn544_probe : IRQ num 367 | |
| <6>pn544_probe : requesting IRQ 367 | |
| <6>lcd panel: ld9040_probe : lcdtype : SM2_A2 | |
| <6>lcd panel: ld9040 panel driver has been probed. | |
| <6>PPP generic driver version 2.4.2 | |
| <6>PPP Deflate Compression module registered | |
| <6>PPP BSD Compression module registered | |
| <6>PPP MPPE Compression module registered | |
| <6>NET: Registered protocol family 24 | |
| <6>tun: Universal TUN/TAP device driver, 1.6 | |
| <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
| <6>host_notifier host_notifier.0: notifier_prove | |
| <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| <6>usbcore: registered new interface driver usblp | |
| <6>Initializing USB Mass Storage driver... | |
| <6>usbcore: registered new interface driver usb-storage | |
| <6>USB Mass Storage support registered. | |
| <6>otg pdata e207d960, irq c0cbffe0 | |
| <6>s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics | |
| <6>s3c-udc : version 15 March 2009 | |
| <6>input: gpio-keys as /devices/platform/gpio-keys.0/input/input1 | |
| <7>[keys]PWR 0 | |
| <6>input: sec_touchscreen as /devices/virtual/input/input2 | |
| <6>Atmel MXT224 3-004a: family = 0x81, variant = 0x1, version= 0x10, build = 170 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_enable_wtsr: enable WTSR | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_enable_smpl: enable SMPL | |
| <6>max8997_rtc_enable_smpl: WTSR_SMPL(0xc3) | |
| <6>using rtc device, max8997-rtc, for alarms | |
| <6>max8997-rtc max8997-rtc: rtc core: registered max8997-rtc as rtc0 | |
| <4>S3C24XX RTC, (c) 2004,2006 Simtec Electronics | |
| <6>s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1 | |
| <6>i2c /dev entries driver | |
| <6>Linux video capture interface: v2.00 | |
| <7>[S5K5BAFX] s5k5bafx_create_sysfs | |
| <6>s3c-csis: Samsung MIPI-CSIS0 driver probed successfully | |
| <6>s3c-csis: Samsung MIPI-CSIS1 driver probed successfully | |
| <4>Initialize JPEG driver | |
| <4>S5P HPD Driver, (c) 2009 Samsung Electronics | |
| <6>s5p_int_src_ext_hpd() | |
| <6>s5p_hpd_read_gpio(0) | |
| <6>s5p_hpd_read_gpio(0) | |
| <6>i2c i2c-7: attached s5p_ddc into i2c adapter successfully | |
| <4>i2c-core: driver [s5p_ddc] using legacy suspend method | |
| <4>i2c-core: driver [s5p_ddc] using legacy resume method | |
| <6>MFC(Multi Function Codec - FIMV v5.x) registered successfully | |
| <6>sii9234_cfg_gpio() | |
| <6>Registered chained gpio int handler for interrupt 111. | |
| <6>Registered interrupt support for gpio group 10. | |
| <6>s5p_gpioint_set_type irq:397 is at GPF3(5) | |
| <6>s5p_gpioint_set_type irq:397 is at GPF3(5) | |
| <6>sii9234 : create mhl sysfile | |
| <6>input: sii9234_rcp as /devices/virtual/input/input3 | |
| <6>max8997-charger max8997-charger: max8997_charger_probe : MAX8997 Charger Driver Loading | |
| <6>max8922-charger max8922-charger: max8922_probe : MAX8922 Charger Driver Loading | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x0 | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>max17042 9-0036: max17042_probe: MAX17042 Driver Loading | |
| <6>max17042 9-0036: max17042_probe : is enable (1) | |
| <6>max17042 9-0036: max17042_init_regs | |
| <6>max17042 9-0036: fuel alert soc (2) | |
| <6>max17042 9-0036: max17042_alert_init | |
| <6>wake enabled for irq 371 | |
| <6>max17042 9-0036: max17042_irq_init : config_reg(2314) irq(371) | |
| <6>max17042 9-0036: MAX17042 Fuel-Gauge Ver 1460 | |
| <6>max17042 9-0036: max17042_probe: MAX17042 Driver Loaded | |
| <4>i2c-core: driver [max17042] using legacy suspend method | |
| <4>i2c-core: driver [max17042] using legacy resume method | |
| <6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com | |
| <6>Bluetooth: HCI UART driver ver 2.2 | |
| <6>Bluetooth: HCI H4 protocol initialized | |
| <6>cpuidle: using governor ladder | |
| <6>cpuidle: using governor menu | |
| <6>mshci: Mobile Storage Host Controller Interface driver | |
| <6>mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd | |
| <6>dw_mmc dw_mmc: clock source 0: sclk_dwmci (90316800 Hz) | |
| <3>mmc0: Version ID 0x5342230a. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA | |
| <6>sdhci: Secure Digital Host Controller Interface driver | |
| <6>sdhci: Copyright(c) Pierre Ossman | |
| <6>s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (8888888 Hz) | |
| <6>mmc1: vtf_2.8v regulator found | |
| <6>sdhci_set_ios : MMC Card ON samsung-hsmmc | |
| <6>mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA | |
| <6>wake enabled for irq 380 | |
| <6>mmc1: card removed. | |
| <6>s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz) | |
| <6>mmc2: no vmmc regulator found | |
| <6>mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA | |
| <6>usbcore: registered new interface driver usbhid | |
| <6>usbhid: USB HID core driver | |
| <6>logger: created 2048K log 'log_main' | |
| <6>logger: created 256K log 'log_events' | |
| <6>logger: created 1024K log 'log_radio' | |
| <6>logger: created 256K log 'log_system' | |
| <6>logger: created 256K log 'log_sf' | |
| <6>k3dh_probe: is started. | |
| <6>k3dh_probe: is successful. | |
| <6>input: gyro_sensor as /devices/virtual/input/input4 | |
| <6>akm8975_probe is called. | |
| <6>akm8975_probe: asa_x = 164, asa_y = 163, asa_z = 174 | |
| <6>Registered sensors device: magnetic_sensor | |
| <6>akm8975_probe is successful. | |
| <3>mmc0: cmd 52 response timeout error | |
| <3>mmc0: cmd 52 response timeout error | |
| <3>mmc0: cmd 8 response timeout error | |
| <3>mmc0: cmd 5 response timeout error | |
| <3>mmc0: cmd 5 response timeout error | |
| <3>mmc0: cmd 5 response timeout error | |
| <3>mmc0: cmd 5 response timeout error | |
| <3>mmc0: cmd 55 response timeout error | |
| <3>mmc0: cmd 55 response timeout error | |
| <3>mmc0: cmd 55 response timeout error | |
| <3>mmc0: cmd 55 response timeout error | |
| <6>mmc0: VIS00M: 15010056495330304d092ec73a485fcf | |
| <6>mmc0: new high speed DDR MMC card at address 0001 | |
| <4>mmc_can_erase: called | |
| <6>mmcblk0: mmc0:0001 VIS00M 14.6 GiB | |
| <4>mmc_can_erase: called | |
| <6>mmcblk0boot0: mmc0:0001 VIS00M partition 1 512 KiB | |
| <4>mmc_can_erase: called | |
| <6>mmcblk0boot1: mmc0:0001 VIS00M partition 2 512 KiB | |
| <4>GPT:Primary header thinks Alt. header is not at the end of the disk. | |
| <4>GPT:30775295 != 30777343 | |
| <4>GPT:Alternate GPT header not at the end of the disk. | |
| <4>GPT:30775295 != 30777343 | |
| <4>GPT: Use GNU Parted to correct GPT errors. | |
| <6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 | |
| <6> mmcblk0boot1: unknown partition table | |
| <6> mmcblk0boot0: unknown partition table | |
| <3>cm3663_setup_reg: initial proximity value = 1 | |
| <6>input: proximity_sensor as /devices/virtual/input/input5 | |
| <6>input: light_sensor as /devices/virtual/input/input6 | |
| <6>Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics | |
| <6>audss_init: RCLK SRC[busclk] | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>Samsung SRP driver, (c) 2010 Samsung Electronics | |
| <6>SRP: Driver successfully probed | |
| <6>ALSA device list: | |
| <6> No soundcards found. | |
| <6>GACT probability NOT on | |
| <6>Mirror/redirect action on | |
| <6>u32 classifier | |
| <6> Actions configured | |
| <6>Netfilter messages via NETLINK v0.30. | |
| <6>nf_conntrack version 0.5.0 (11959 buckets, 47836 max) | |
| <6>ctnetlink v0.93: registering with nfnetlink. | |
| <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0 | |
| <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. | |
| <6>xt_time: kernel timezone is -0000 | |
| <6>ip_tables: (C) 2000-2006 Netfilter Core Team | |
| <6>arp_tables: (C) 2002 David S. Miller | |
| <6>TCP cubic registered | |
| <6>NET: Registered protocol family 10 | |
| <6>Mobile IPv6 | |
| <6>ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| <6>IPv6 over IPv4 tunneling driver | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>NET: Registered protocol family 17 | |
| <6>NET: Registered protocol family 15 | |
| <6>Bluetooth: RFCOMM TTY layer initialized | |
| <6>Bluetooth: RFCOMM socket layer initialized | |
| <6>Bluetooth: RFCOMM ver 1.11 | |
| <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
| <6>NET: Registered protocol family 35 | |
| <5>Registering the dns_resolver key type | |
| <6>EXYNOS4210: Adaptive Support Voltage init | |
| <6>exynos4210_check_vdd_arm: current vdd_arm(1350000uV), set vdd_arm (1.2V) | |
| <6>EXYNOS4: HPM value = 18 | |
| <6>EXYNOS4: IDS value = 18 | |
| <6><6>Support 1.2GHz | |
| <6><6>ASV Group for This Exynos4210 is 0x40000003 | |
| <6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 | |
| <5>Registering SWP/SWPB emulation handler | |
| <6>DVFS : VDD_ARM Voltage table set with 3 Group | |
| <6>max8997_set_arm_voltage_table | |
| <3>max8997-pmic max8997-pmic: max8997_set_buck1_voltages: too big voltage array!(18) | |
| <6>DVFS : VDD_INT Voltage table set with 3 Group | |
| <6>exynos4_pm_hotplug_device_init: 0 | |
| <6>EXYNOS4 PM-hotplug init function | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <6>s5p-ehci s5p-ehci: S5P EHCI Host Controller | |
| <6>s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 | |
| <6>s5p-ehci s5p-ehci: irq 134, io mem 0x12580000 | |
| <6>s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00 | |
| <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| <6>usb usb1: Product: S5P EHCI Host Controller | |
| <6>usb usb1: Manufacturer: Linux 3.1.0-R58-Siyah-Dorimanx-V7.40-ICS-JB-SGII-PWR-CORE ehci_hcd | |
| <6>usb usb1: SerialNumber: s5p-ehci | |
| <6>hub 1-0:1.0: USB hub found | |
| <6>hub 1-0:1.0: 3 ports detected | |
| <6>CP not ready, Active State low | |
| <6>@@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 8, 2nd_throttle = 14 | |
| <6>@@@ get_refresh_interval = 0x2e | |
| <6>@@@ get_refresh_interval = 0x5d | |
| <6>** temperature set value ** | |
| <6>1st throttling stop_temp = 61, start_temp = 64 | |
| <6>2nd throttling stop_temp = 87, start_tmep = 103 | |
| <6>tripping temp = 110, s/w emergency temp = 120 | |
| <6>mem throttling stop_temp = 80, start_temp = 85 | |
| <6>exynos4210_tmu_init: triminfo = 0x00000052, low 8bit = 0x52, high 24 bit = 0x000000 | |
| <6>THD_TEMP:0x76: TRIG_LEV0: 0x03 | |
| <6>TRIG_LEV1: 0x2a TRIG_LEV2: 0x31, TRIG_LEV3: 0xff | |
| <6>[MODEM_IF] init_modem | |
| <3>check phone active = 94 | |
| <6>umts_modem_cfg_gpio done | |
| <6>modem_link_pm_config_gpio done | |
| <3>mif: modem_probe: modem_if | |
| <6>mif: phone_active_irq_handler: PA EVENT : reset =0, pa=0, cp_dump=0 | |
| <6>wake enabled for irq 366 | |
| <6>mif: create_modemctl_device: xmm6260 is created!!! | |
| <6>wake enabled for irq 361 | |
| <6>usbcore: registered new interface driver cdc_modem | |
| <6>mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe250bc00) | |
| <6>mif: hsic_create_link_device: usb : create_link_device DONE | |
| <3>mif: modem_probe: link created: usb | |
| <6>mif: create_io_device: Bood device = umts_boot0 | |
| <6>mif: modem_probe: Complete!!! | |
| <4>regulator_init_complete: safeout2 range: incomplete constraints, leaving on | |
| <4>regulator_init_complete: safeout1 range: incomplete constraints, leaving on | |
| <6>OTG s5pc110_otg_module_init(380): s3c_otg_module_init | |
| <6>otg host_probe start c0cae380 | |
| <6>s5p_gpioint_set_type irq:389 is at GPL0(5) | |
| <7>[TouchKey] i2c_touchkey_probe | |
| <6>input: sec_touchkey as /devices/virtual/input/input7 | |
| <7>[TouchKey] Module Version: 12 | |
| <6>s5p_gpioint_set_type irq:389 is at GPL0(5) | |
| <6>max8997-rtc max8997-rtc: setting system clock to 2013-01-16 08:47:29 UTC (1358326049) | |
| <6>ctrl->mem.size = 0x500000 | |
| <6>ctrl->mem.base = 0x70b3b000 | |
| <6> | |
| <6> | |
| <6> | |
| <6>cam_cfg_gpio: pdev->id=0 | |
| <6>FIMC0 registered successfully | |
| <6>ctrl->mem.size = 0x1fe1000 | |
| <6>ctrl->mem.base = 0x6eb5a000 | |
| <6>FIMC1 registered successfully | |
| <6>ctrl->mem.size = 0x1900000 | |
| <6>ctrl->mem.base = 0x6d25a000 | |
| <6>FIMC2 registered successfully | |
| <3>s3c-fimc3: fimc_register_controller: get cma info failed | |
| <6>ctrl->mem.size = 0x0 | |
| <6>ctrl->mem.base = 0x0 | |
| <6>FIMC3 registered successfully | |
| <6>S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics | |
| <6>sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading | |
| <6>sec-battery sec-battery: sec_bat_probe: use sub-charger (max8922-charger) | |
| <6>sec_bat_get_lpcharging_state: LP charging:0 | |
| <4>Initializing charge current control interface | |
| <6>sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loaded | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <4>Warning: unable to open an initial console. | |
| <6>Freeing init memory: 10504K | |
| <6>sec_bat_get_lpcharging_state: LP charging:0 | |
| <6>EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null) | |
| <6>s3cfb s3cfb.0: change blank mode=4, fb2 | |
| <6>lcd panel: ld9040_power_off | |
| <6>s3cfb s3cfb.0: change blank mode=0, fb2 | |
| <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2 | |
| <6>lcd panel: ld9040_power_on | |
| <6>lcd panel: id=2 brightness=160, bl=13, candela=150 | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>exynos4_handler_tmu_state: inform to init state to platform. | |
| <6>EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <4>Initializing USB with rom_feature_set: 3 | |
| <7>late_init_android_gadget | |
| <6>usb: android_probe pdata: c1193e18 | |
| <6>usb: android_probe nluns=2 | |
| <7>usb: android_bind disconnect | |
| <7>usb: usb_gadget_disconnect | |
| <7>usb: mass_storage_function_init pdata->nluns=2, cdfs = 0 | |
| <7>usb: usb_string_id cdev(0xe10ea720)->next_string_id=1 | |
| <6>android_usb gadget: Mass Storage Function, version: 2009/09/11 | |
| <6>android_usb gadget: Number of LUNs=2 | |
| <6> lun0: LUN: removable file: (no medium) | |
| <6> lun1: LUN: removable file: (no medium) | |
| <7>usb: usb_string_id cdev(0xe10ea720)->next_string_id=2 | |
| <7>usb: usb_string_id cdev(0xe10ea720)->next_string_id=3 | |
| <7>usb: usb_string_id cdev(0xe10ea720)->next_string_id=4 | |
| <7>usb: composite_bind idVendor=0x0, idProduct=0x0 | |
| <7>usb: composite_bind bcdDevice=0x0 | |
| <7>usb: composite_bind composite_manufacturer= | |
| <6>android_usb gadget: android_usb ready | |
| <6>usb: Skip udc_enable | |
| <4>Mali: init_mali_clock mali_clock c1182148 | |
| <4>Mali: exynos_result_of_asv_group = 0x3, target_asv = 0x4 | |
| <4>Mali: mali_dvfs[0].vol = 900000 | |
| <4>Mali: mali_dvfs[1].vol = 950000 | |
| <4>Mali: mali_dvfs[2].vol = 1000000 | |
| <4>Mali: mali_dvfs[3].vol = 1100000 | |
| <4>Mali: mali_dvfs[4].vol = 1200000 | |
| <4>Mali: exynos_result_of_asv_group = 0x3, target_asv = 0x4 | |
| <4>Mali: mali_dvfs[0].vol = 900000 | |
| <4>Mali: mali_dvfs[1].vol = 950000 | |
| <4>Mali: mali_dvfs[2].vol = 1000000 | |
| <4>Mali: mali_dvfs[3].vol = 1100000 | |
| <4>Mali: mali_dvfs[4].vol = 1200000 | |
| <4>Mali: Mali device driver loaded | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7] | |
| <7>i2s_txctrl: Turn Off - spr is no active | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>asoc: mc1n2-da0i <-> samsung-i2s.0 mapping ok | |
| <6>register_mali_control misc_register(mali_control) | |
| <6>sec_bat_get_lpcharging_state: LP charging:0 | |
| <3>init: /init.smdk4210.rc: 60: invalid command 'socket' | |
| <3>init: /init.smdk4210.rc: 326: ignored duplicate definition of service 'mdnsd' | |
| <3>init: invalid gid 'm2m' | |
| <3>init: invalid gid 'm2m' | |
| <3>init: invalid gid 'm2m' | |
| <3>init: invalid gid 'm2m' | |
| <3>init: invalid gid 'm2m' | |
| <3>init: invalid gid 'm2m' | |
| <3>init: invalid gid 'm2m' | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <3>init: cannot open '/initlogo.rle' | |
| <3>init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead | |
| <6>EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) | |
| <6>EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc | |
| <6>MFC F/W loaded successfully (size: 376448) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>max8997-muic max8997-muic: max8997_muic_init_detect | |
| <6>max8997-muic max8997-muic: detect_dev: STATUS1:0x3f, 2:0x0 | |
| <6>max8997-muic max8997-muic: detect_dev: DETACHED | |
| <6>max8997-muic max8997-muic: handle_detach: UNKNOWN | |
| <6>max8997-muic max8997-muic: detach_charger | |
| <6>sec-battery sec-battery: sec_bat_set_property: cable was changed(1) | |
| <6>max8997-charger max8997-charger: max8997_disable_charging: disable charging | |
| <6>max8922-charger max8922-charger: max8922_enable_charging: disable charging,TA | |
| <6>EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) | |
| <6>set_gps_uart_op: on | |
| <6>set_gps_uart_op: off | |
| <6>set_gps_uart_op: on | |
| <6>set_gps_uart_op: off | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7] | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7] | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mdnie mdnie: scenario_store :: value=4 | |
| <6>mdnie mdnie: CAMERA | |
| <3>init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <3>init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead | |
| <3>init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead | |
| <3>init: service 'console' requires console | |
| <7>usb: enable_store enabled=0, !dev->enabled=1 | |
| <7>usb: usb_gadget_disconnect | |
| <7>usb: functions_store buff=mtp,adb | |
| <7>usb: android_enable_function name=mtp | |
| <7>usb: android_enable_function name=acm | |
| <7>usb: android_enable_function name=adb | |
| <7>usb: enable_store enabled=1, !dev->enabled=1 | |
| <7>usb: enable_store f:mtp | |
| <7>usb: enable_store f:acm | |
| <7>usb: acm is enabled. (bcdDevice=0x400) | |
| <7>usb: enable_store f:adb | |
| <7>usb: enable_store vendor=4e8,product=6860,bcdDevice=400 | |
| <7>,Class=0,SubClass=0,Protocol=0 | |
| <7>usb: enable_store next cmd : usb_add_config | |
| <6>adb_open | |
| <7>usb: android_bind_enabled_functions f:mtp | |
| <6>mtp_bind_config | |
| <7>usb: usb_string_id cdev(0xe10ea720)->next_string_id=5 | |
| <7>usb: android_bind_enabled_functions f:acm | |
| <7>usb: usb_string_id cdev(0xe10ea720)->next_string_id=6 | |
| <7>usb: usb_string_id cdev(0xe10ea720)->next_string_id=7 | |
| <7>usb: usb_string_id cdev(0xe10ea720)->next_string_id=8 | |
| <6>DUN is registerd | |
| <7>usb: android_bind_enabled_functions f:adb | |
| <6>adb_bind_config | |
| <7>usb: usb_gadget_connect | |
| <6>EXT4-fs (mmcblk0p12): re-mounted. Opts: barrier=1,data=ordered,noauto_da_alloc,barrier=0 | |
| <6>warning: `rild' uses 32-bit capabilities (legacy support in use) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>EXT4-fs (mmcblk0p9): re-mounted. Opts: barrier=1,data=ordered,noauto_da_alloc,barrier=0 | |
| <6>EXT4-fs (mmcblk0p7): re-mounted. Opts: barrier=1,data=ordered,noauto_da_alloc,barrier=0 | |
| <6>EXT4-fs (mmcblk0p10): re-mounted. Opts: barrier=1,data=ordered,noauto_da_alloc,barrier=0 | |
| <3>mif: misc_open: iod = umts_boot0 | |
| <6>mif: usb_init_communication: 1933:rild | |
| <6>mif: xmm6260_off: xmm6260_off() | |
| <6>mif: link_pm_ioctl: 6f30 | |
| <7>store_ehci_power: EHCI turns off | |
| <6>s5p-ehci s5p-ehci: remove, state 4 | |
| <6>usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0x94/0x140 | |
| <6>s5p-ehci s5p-ehci: USB bus 1 deregistered | |
| <6>CP not ready, Active State low | |
| <6>mif: link_pm_ioctl: 6f31 | |
| <6>mif: xmm6260_on: xmm6260_on() | |
| <6>EXT4-fs (mmcblk0p1): re-mounted. Opts: barrier=1,data=ordered,noauto_da_alloc,barrier=0 | |
| <6>EXT4-fs (mmcblk0p7): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc,discard | |
| <6>EXT4-fs (mmcblk0p10): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc,discard | |
| <6>EXT4-fs (mmcblk0p9): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc | |
| <6>EXT4-fs (mmcblk0p10): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc,discard | |
| <6>EXT4-fs (mmcblk0p7): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc,discard | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7] | |
| <6>G:P:DmaAddr=@61260000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffd80000 | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>mif: link_pm_ioctl: 6f30 | |
| <7>store_ehci_power: EHCI turns on | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <6>s5p-ehci s5p-ehci: S5P EHCI Host Controller | |
| <6>s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 | |
| <6>s5p-ehci s5p-ehci: irq 134, io mem 0x12580000 | |
| <6>s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00 | |
| <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| <6>usb usb1: Product: S5P EHCI Host Controller | |
| <6>usb usb1: Manufacturer: Linux 3.1.0-R58-Siyah-Dorimanx-V7.40-ICS-JB-SGII-PWR-CORE ehci_hcd | |
| <6>usb usb1: SerialNumber: s5p-ehci | |
| <3>init: untracked pid 2398 exited | |
| <6>hub 1-0:1.0: USB hub found | |
| <6>hub 1-0:1.0: 3 ports detected | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_ioctl: 6f31 | |
| <6>mif: link_pm_ioctl: 6f33 | |
| <6>mdnie mdnie: CAMERA | |
| <6>s3cfb s3cfb.0: [fb0] Alloc dma: 0x71329000, size: 0x002ee000 | |
| <6>s3cfb s3cfb.0: [fb1] Alloc dma: 0x71617000, size: 0x002ee000 | |
| <4>s3c-fimc1: FIMC1 1 opened. | |
| <6>EXT4-fs (mmcblk0p9): re-mounted. Opts: (null) | |
| <3>init: untracked pid 2401 exited | |
| <6>EXT4-fs (mmcblk0p9): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc | |
| <3>** Up_Threshold is changed to 25 ** | |
| <6>usb 1-2: new high speed USB device number 2 using s5p-ehci | |
| <3>** Up_Threshold is changed to 80 ** | |
| <6>[VIB] pwm_val_store: pwm_val=75 | |
| <6>[VIB] pwm_val_store: pwm_duty=32935 | |
| <6>EXT4-fs (mmcblk0p9): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc | |
| <3>init: untracked pid 2397 exited | |
| <4>usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 | |
| <6>usb 1-2: New USB device found, idVendor=058b, idProduct=0041 | |
| <6>usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
| <6>mif: if_usb_probe: usbdev = 0xe1206800 | |
| <6>mif: if_usb_set_pipe: set 0 | |
| <6>mif: if_usb_probe: devdata usbdev = 0xe1206800 | |
| <6>mif: if_usb_probe: successfully done | |
| <6>mif: link_pm_ioctl: 6f33 | |
| <3>hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling... | |
| <6>usb 1-2: USB disconnect, device number 2 by hub_thread+0x4d4/0x118c | |
| <6>mif: if_usb_disconnect: | |
| <6>mif: if_usb_disconnect: put dev 0xe1206800 | |
| <6>mif: if_usb_disconnect: | |
| <6>mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0 | |
| <3>mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3) | |
| <3>mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3) | |
| <6>mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0 | |
| <3>mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 3) | |
| <3>mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 3) | |
| <6>mif: link_pm_ioctl: 6f32 | |
| <6>mif: link_pm_ioctl: 6f32 | |
| <6>mif: link_pm_ioctl: 6f30 | |
| <7>store_ehci_power: EHCI turns off | |
| <6>s5p-ehci s5p-ehci: remove, state 1 | |
| <6>usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0x94/0x140 | |
| <6>usb 1-2: new high speed USB device number 3 using s5p-ehci | |
| <3>hub 1-0:1.0: cannot reset port 2 (err = -19) | |
| <3>hub 1-0:1.0: cannot disable port 2 (err = -19) | |
| <3>hub 1-0:1.0: cannot reset port 2 (err = -19) | |
| <3>hub 1-0:1.0: cannot disable port 2 (err = -19) | |
| <3>hub 1-0:1.0: cannot reset port 2 (err = -19) | |
| <3>hub 1-0:1.0: cannot disable port 2 (err = -19) | |
| <3>hub 1-0:1.0: cannot reset port 2 (err = -19) | |
| <3>hub 1-0:1.0: cannot disable port 2 (err = -19) | |
| <3>hub 1-0:1.0: unable to enumerate USB device on port 2 | |
| <3>hub 1-0:1.0: cannot disable port 2 (err = -19) | |
| <6>s5p-ehci s5p-ehci: USB bus 1 deregistered | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>mif: link_pm_ioctl: 6f31 | |
| <6>mif: link_pm_ioctl: 6f32 | |
| <6>mif: link_pm_ioctl: 6f32 | |
| <6>mif: link_pm_ioctl: 6f30 | |
| <7>store_ehci_power: EHCI turns on | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <6>s5p-ehci s5p-ehci: S5P EHCI Host Controller | |
| <6>s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 | |
| <6>s5p-ehci s5p-ehci: irq 134, io mem 0x12580000 | |
| <6>s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00 | |
| <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| <6>usb usb1: Product: S5P EHCI Host Controller | |
| <6>usb usb1: Manufacturer: Linux 3.1.0-R58-Siyah-Dorimanx-V7.40-ICS-JB-SGII-PWR-CORE ehci_hcd | |
| <6>usb usb1: SerialNumber: s5p-ehci | |
| <6>hub 1-0:1.0: USB hub found | |
| <6>hub 1-0:1.0: 3 ports detected | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_ioctl: 6f31 | |
| <6>mif: link_pm_ioctl: 6f33 | |
| <6>usb 1-2: new high speed USB device number 2 using s5p-ehci | |
| <6>usb 1-2: New USB device found, idVendor=1519, idProduct=0020 | |
| <6>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| <6>usb 1-2: Product: HSIC Device | |
| <6>usb 1-2: Manufacturer: Comneon | |
| <6>usb 1-2: SerialNumber: 0123456789 | |
| <6>mif: if_usb_probe: usbdev = 0xe1207000 | |
| <6>mif: if_usb_set_pipe: set 0 | |
| <6>mif: if_usb_probe: devdata usbdev = 0xe1207000 | |
| <6>mif: if_usb_probe: successfully done | |
| <6>mif: if_usb_probe: usbdev = 0xe1207000 | |
| <6>mif: if_usb_set_pipe: set 1 | |
| <6>mif: if_usb_probe: devdata usbdev = 0xe1207000 | |
| <6>mif: if_usb_probe: successfully done | |
| <6>mif: if_usb_probe: usbdev = 0xe1207000 | |
| <6>mif: if_usb_set_pipe: set 2 | |
| <6>mif: if_usb_probe: devdata usbdev = 0xe1207000 | |
| <6>mif: if_usb_probe: successfully done | |
| <6>mif: if_usb_probe: usbdev = 0xe1207000 | |
| <6>mif: if_usb_set_pipe: set 3 | |
| <6>mif: if_usb_probe: devdata usbdev = 0xe1207000 | |
| <3>mif: link_pm_change_modem_state: set modem state 4 by if_usb_probe+0x364/0x458 | |
| <3>mif: io_dev_modem_state_changed: modem state changed. (iod: umts_ipc0, state: 4) | |
| <3>mif: io_dev_modem_state_changed: modem state changed. (iod: umts_boot0, state: 4) | |
| <6>mif: if_usb_probe: successfully done | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>mif: link_pm_ioctl: 6f33 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <3>** Up_Threshold is changed to 80 ** | |
| <3>mif: misc_release: iod = umts_boot0 | |
| <3>mif: misc_open: iod = umts_ipc0 | |
| <6>mif: usb_init_communication: 1933:rild | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <3>mif: start_ipc: send 'a' | |
| <3>mif: misc_open: iod = umts_rfs0 | |
| <6>mif: usb_init_communication: 1933:rild | |
| <6>mif: link_pm_runtime_work: rpm_states=3 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>mif: link_pm_runtime_work: rpm_states=3 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>mif: link_pm_runtime_work: rpm_states=3 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>mif: link_pm_runtime_work: rpm_states=3 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <7>usb: usb_ready udc_enable=0 | |
| <6>max8997-muic max8997-muic: max8997_muic_usb_detect | |
| <6>wake enabled for irq 354 | |
| <6>input: compass_sensor as /devices/virtual/input/input8 | |
| <6>k3dh_open: is called. | |
| <6>wake disabled for irq 354 | |
| <6>max8997-muic max8997-muic: max8997_muic_mhl_detect | |
| <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=380 | |
| <4>------------[ cut here ]------------ | |
| <4>WARNING: at fs/proc/base.c:1020 oom_adjust_write+0x24c/0x264() | |
| <4>er.ServerThread (5524): /proc/5471/oom_adj is deprecated, please use /proc/5471/oom_score_adj instead. | |
| <4>Modules linked in: | |
| <4>Backtrace: invalid frame pointer 0x532a4c8c | |
| <4>---[ end trace 1b75b31a2719ed1e ]--- | |
| <4>Mali: :::mali dvfs step 0 clock and voltage = 108 Mhz, 900000 V | |
| <4>Mali: :::mali dvfs step 1 clock and voltage = 160 Mhz, 950000 V | |
| <4>Mali: :::mali dvfs step 2 clock and voltage = 200 Mhz, 1000000 V | |
| <4>Mali: :::mali dvfs step 3 clock and voltage = 267 Mhz, 1100000 V | |
| <4>Mali: :::mali dvfs step 4 clock and voltage = 267 Mhz, 1200000 V | |
| <4>Mali: :::mali dvfs step 0 clock and voltage = 108 Mhz, 900000 V | |
| <4>Mali: :::mali dvfs step 1 clock and voltage = 160 Mhz, 950000 V | |
| <4>Mali: :::mali dvfs step 2 clock and voltage = 200 Mhz, 1000000 V | |
| <4>Mali: :::mali dvfs step 3 clock and voltage = 267 Mhz, 1100000 V | |
| <4>Mali: :::mali dvfs step 4 clock and voltage = 267 Mhz, 1200000 V | |
| <4>Mali: :::mali dvfs step 0 clock and voltage = 108 Mhz, 900000 V | |
| <4>Mali: :::mali dvfs step 1 clock and voltage = 160 Mhz, 950000 V | |
| <4>Mali: :::mali dvfs step 2 clock and voltage = 200 Mhz, 1000000 V | |
| <4>Mali: :::mali dvfs step 3 clock and voltage = 267 Mhz, 1100000 V | |
| <4>Mali: :::mali dvfs step 4 clock and voltage = 267 Mhz, 1200000 V | |
| <4>Mali: :::mali dvfs step 0 clock and voltage = 108 Mhz, 900000 V | |
| <4>Mali: :::mali dvfs step 1 clock and voltage = 160 Mhz, 950000 V | |
| <4>Mali: :::mali dvfs step 2 clock and voltage = 200 Mhz, 1000000 V | |
| <4>Mali: :::mali dvfs step 3 clock and voltage = 267 Mhz, 1100000 V | |
| <4>Mali: :::mali dvfs step 4 clock and voltage = 267 Mhz, 1200000 V | |
| <4>Mali: :::mali dvfs step 0 clock and voltage = 108 Mhz, 900000 V | |
| <4>Mali: :::mali dvfs step 1 clock and voltage = 160 Mhz, 950000 V | |
| <4>Mali: :::mali dvfs step 2 clock and voltage = 200 Mhz, 1000000 V | |
| <4>Mali: :::mali dvfs step 3 clock and voltage = 267 Mhz, 1100000 V | |
| <4>Mali: :::mali dvfs step 4 clock and voltage = 267 Mhz, 1200000 V | |
| <4>init_j4fs_fs 1480: Version 1.0.0p2_b0 | |
| <3>init: untracked pid 2400 exited | |
| <4>Mali: ::: step0_up change to 30 % | |
| <4>Mali: :::step1_down change to 20 % | |
| <4>Mali: :::step1_up change to 40 % | |
| <4>Mali: :::step2_down change to 30 % | |
| <4>Mali: :::step2_up change to 55 % | |
| <4>Mali: :::step3_down change to 45 % | |
| <4>Mali: :::step3_up change to 80 % | |
| <6>lcd panel: acl_set_store - 0, 1 | |
| <6>mdnie mdnie: CAMERA | |
| <4>FlashDevMount : filp_open() OK....! | |
| <4>i2c-core: driver [Si4709] using legacy suspend method | |
| <4>i2c-core: driver [Si4709] using legacy resume method | |
| <6>usbcore: registered new interface driver usbserial | |
| <6>USB Serial support registered for generic | |
| <6>usbcore: registered new interface driver usbserial_generic | |
| <6>usbserial: USB Serial Driver core | |
| <6>mdnie mdnie: CAMERA | |
| <6>USB Serial support registered for FTDI USB Serial Device | |
| <6>usbcore: registered new interface driver ftdi_sio | |
| <6>ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver | |
| <6>USB Serial support registered for pl2303 | |
| <6>usbcore: registered new interface driver pl2303 | |
| <6>pl2303: Prolific PL2303 USB to serial adaptor driver | |
| <3>init: untracked pid 2385 exited | |
| <6>lcd panel: ld9040_sysfs_store_user_gamma_adjust :: user_gamma_adjust=0 | |
| <4>there is no gamma shift & brightness changed | |
| <6>[VIB] pwm_val_store: pwm_val=75 | |
| <6>[VIB] pwm_val_store: pwm_duty=32935 | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <5>[MCDRV] mc1n2_carib_AVOL_HP data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC1 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC2 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_RC data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_SP data=0 | |
| <5>[MCDRV] mc1n2_carib_DVOL_DAC_MASTER data=0 | |
| <5>[MCDRV] update_reg_vol call update_vol_mask=0x0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_HP data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC1 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC2 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_RC data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_SP data=0 | |
| <5>[MCDRV] mc1n2_carib_DVOL_DAC_MASTER data=0 | |
| <5>[MCDRV] update_reg_vol call update_vol_mask=0x0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_HP data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC1 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC2 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_RC data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_SP data=0 | |
| <5>[MCDRV] mc1n2_carib_DVOL_DAC_MASTER data=0 | |
| <5>[MCDRV] update_reg_vol call update_vol_mask=0x0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_HP data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC1 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC2 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_RC data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_SP data=0 | |
| <5>[MCDRV] mc1n2_carib_DVOL_DAC_MASTER data=0 | |
| <5>[MCDRV] update_reg_vol call update_vol_mask=0x0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_HP data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC1 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC2 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_RC data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_SP data=0 | |
| <5>[MCDRV] mc1n2_carib_DVOL_DAC_MASTER data=0 | |
| <5>[MCDRV] update_reg_vol call update_vol_mask=0x0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_HP data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC1 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC2 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_RC data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_SP data=0 | |
| <5>[MCDRV] mc1n2_carib_DVOL_DAC_MASTER data=0 | |
| <5>[MCDRV] update_reg_vol call update_vol_mask=0x0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_HP data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC1 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC2 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_RC data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_SP data=0 | |
| <5>[MCDRV] mc1n2_carib_DVOL_DAC_MASTER data=0 | |
| <5>[MCDRV] update_reg_vol call update_vol_mask=0x0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_HP data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC1 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_MIC2 data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_RC data=0 | |
| <5>[MCDRV] mc1n2_carib_AVOL_SP data=0 | |
| <5>[MCDRV] mc1n2_carib_DVOL_DAC_MASTER data=0 | |
| <5>[MCDRV] update_reg_vol call update_vol_mask=0x0 | |
| <3>[TouchKey] touch_led_brightness: 3000 | |
| <6>EXT4-fs (mmcblk0p9): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc | |
| <6>EXT4-fs (mmcblk0p9): re-mounted. Opts: barrier=0,data=ordered,noauto_da_alloc | |
| <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=410 | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <3>init: untracked pid 2399 exited | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <4>wifi_set_power = 1 | |
| <6>------------------------------------------------ | |
| <6>------------------------------------------------ | |
| <6>brcm_wlan_power Enter: power on | |
| <6>gpio_table = [2] | |
| <7>WLAN: GPIO_WLAN_EN = 1 | |
| <4>wifi_set_carddetect = 1 | |
| <6>gpio_table = [6] | |
| <6>Test logs pdev : c1194d40 s3c_device_hsmmc3 c1194d40 | |
| <6>Test logs notify_func = hsmmc3_notify_func: c0d9a21c | |
| <6>mmc2: card inserted. | |
| <7>usb: state_show buf=DISCONNECTED | |
| <6>acc_open | |
| <6>acc_release | |
| <6>mmc2: cmd 52 command timeout error | |
| <6>mmc2: cmd 52 command timeout error | |
| <6>mmc2: cmd 8 command timeout error | |
| <4>mmc2: queuing unknown CIS tuple 0x80 (7 bytes) | |
| <4>mmc2: queuing unknown CIS tuple 0x80 (3 bytes) | |
| <6>mmc2: new high speed SDIO card at address 0001 | |
| <4>alloc static buf at e21c0000! | |
| <4>dhdsdio_probe : no mutex held. set lock | |
| <4>F1 signature read @0x18000000=0x16834330 | |
| <4>DHD: dongle ram size is set to 294912(orig 294912) | |
| <4>wl_create_event_handler thr:370f created | |
| <6>CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe1329d30 | |
| <4>p2p0: P2P Interface Registered | |
| <4>dhd_attach thr:3715 created | |
| <4>dhd_attach thr:3716 created | |
| <4>dhd_attach thr:3717 created | |
| <4>PR85623WAR in place | |
| <4>dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. | |
| <6>lcd panel: id=2 brightness=102, bl=9, candela=110 | |
| <4>dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) | |
| <6>wake enabled for irq 373 | |
| <4>dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23 | |
| <4>Firmware up: op_mode=0x0001, Broadcom Dongle Host Driver mac=20:71:40 | |
| <4>POWER_VAL = 1 | |
| <4>dhd_wl_ioctl: WLC_GET_VAR: arp_version, ret = -23 | |
| <4>Firmware version = wl0: May 7 2012 16:25:59 version 5.90.100.342 | |
| <4>Broadcom Dongle Host Driver: register interface [wlan0] MAC: 20:71:40 | |
| <4>dhdsdio_probe : the lock is released. | |
| <4> | |
| <4>Dongle Host Driver, version 1.28.19.4 (RC1_1120) | |
| <4>Compiled in drivers/net/wireless/bcmdhd on Jan 16 2013 at 03:18:57 | |
| <4> | |
| <4>Dongle Host Driver, version 1.28.19.4 (RC1_1120) | |
| <4>Compiled in drivers/net/wireless/bcmdhd on Jan 16 2013 at 03:18:57 | |
| <4>dhd_wl_ioctl: WLC_GET_VAR: p2p, ret = -23 | |
| <6>CFGP2P-INFO2) wl_cfgp2p_supported : wl p2p error -23 | |
| <6>CFG80211-INFO2) wl_construct_reginfo : Invalid channel Sepc. 0x190d. | |
| <6>CFG80211-INFO2) wl_construct_reginfo : Invalid channel Sepc. 0x1801. | |
| <6>lcd panel: id=2 brightness=92, bl=8, candela=100 | |
| <6>CFG80211-INFO2) wl_construct_reginfo : Invalid channel Sepc. 0x190d. | |
| <6>CFG80211-INFO2) wl_construct_reginfo : Invalid channel Sepc. 0x1801. | |
| <3>WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for IT as IT rev 1 | |
| <4>dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17 | |
| <6>CFG80211-INFO2) wl_construct_reginfo : Invalid channel Sepc. 0x190d. | |
| <6>CFG80211-INFO2) wl_construct_reginfo : Invalid channel Sepc. 0x1801. | |
| <4>wl_bss_connect_done succeeded with 00:1d:c9 | |
| <6>CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP session starts | |
| <4>wl_bss_connect_done succeeded with 00:1d:c9 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>mif: misc_write: write rfs size = 15 | |
| <3>qtaguid: iface_stat: stat_update() wlan0 not found | |
| <6>mif: misc_write: write rfs size = 15 | |
| <6>mif: misc_write: write rfs size = 15 | |
| <6>mif: misc_write: write rfs size = 15 | |
| <6>CFG80211-TRACE) wl_cfg80211_set_btcoex_dhcp : wl_cfg80211_set_btcoex_dhcp: DHCP is complete | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>FIPS: self-tests for non-FIPS cbc(twofish-generic) (cbc(twofish)) passed | |
| <6>EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>set_gps_uart_op: on | |
| <6>EXT4-fs (dm-0): re-mounted. Opts: (null) | |
| <6>EXT4-fs (dm-0): re-mounted. Opts: (null) | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>set_gps_uart_op: off | |
| <6>mdnie mdnie: scenario_store :: value=4 | |
| <6>mdnie mdnie: CAMERA | |
| <6>mdnie mdnie: mode_store :: value=1 | |
| <6>mdnie mdnie: CAMERA | |
| <6>mdnie mdnie: negative_store :: value=0, by settings.device | |
| <6>mdnie mdnie: outdoor_store :: value=0 | |
| <6>mdnie mdnie: CAMERA | |
| <6>[VIB] pwm_val_store: pwm_val=50 | |
| <6>[VIB] pwm_val_store: pwm_duty=28230 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>lcd panel: id=2 brightness=0, bl=1, candela=30 | |
| <7>[TouchKey] sec_touchkey_early_suspend | |
| <6>powersave_early_suspend: set cpu0 freq in the 200000-600000 KHz range | |
| <6>powersave_early_suspend: set cpu1 freq in the 200000-600000 KHz range | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <4>dhd_early_suspend: enter | |
| <4>dhd_set_suspend: force extra Suspend setting | |
| <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x1 | |
| <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10 | |
| <6>sii9234_early_suspend() | |
| <6>mdnie mdnie: +mdnie_early_suspend | |
| <6>mdnie mdnie: -mdnie_early_suspend | |
| <6>lcd panel: +ld9040_early_suspend | |
| <6>lcd panel: ld9040_power_off | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <7>wlan0: no IPv6 routers present | |
| <6>lcd panel: -ld9040_early_suspend | |
| <6>+s3cfb_early_suspend | |
| <7>s3cfb - disable power domain | |
| <6>-s3cfb_early_suspend | |
| <6>active wake lock radio-interface | |
| <6>active wake lock PowerManagerService.Broadcasts | |
| <6>active wake lock PowerManagerService | |
| <6>active wake lock wlan_rx_wake, time left 230 | |
| <6>sync_system + | |
| <6>sync_system - | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <4>WARNING! power/level is deprecated; use power/control instead | |
| <3>** Up_Threshold is changed to 90 ** | |
| <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=440 | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=380 | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:50:36.000781447 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... | |
| <6>active wake lock PowerManagerService | |
| <4> | |
| <3>Freezing of user space aborted | |
| <4> | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:50:36.012021530 UTC) | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:50:36.931521665 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:50:38 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 227.472 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.408 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.830 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.259 msecs | |
| <6>PM: early resume of devices complete after 0.608 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 390.229 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:50:38.394193389 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:50:42.497599202 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:50:45 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 227.474 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.439 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.796 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.260 msecs | |
| <6>PM: early resume of devices complete after 0.608 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 407.177 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:50:45.411969791 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock alarm_rtc, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:50:46.141165115 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16 | |
| <3>PM: Device alarm failed to suspend: error -16 | |
| <3>PM: Some devices failed to suspend | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 338.019 msecs | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:50:46.539553697 UTC) | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:50:46.788249931 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:50:53 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 227.421 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.446 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.801 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.263 msecs | |
| <6>PM: early resume of devices complete after 0.608 msecs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 405.102 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:50:53.411260042 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock alarm_rtc, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:50:54.013727634 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16 | |
| <3>PM: Device alarm failed to suspend: error -16 | |
| <3>PM: Some devices failed to suspend | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 331.393 msecs | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:50:54.406234806 UTC) | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:50:54.657626852 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:51:39 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 227.481 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.445 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.797 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.260 msecs | |
| <6>PM: early resume of devices complete after 0.650 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 406.266 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:51:39.411893706 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:51:40.114344611 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... | |
| <6>active wake lock wlan_rx_wake, time left 270 | |
| <6>active wake lock alarm, time left 1475 | |
| <4> | |
| <3>Freezing of user space aborted | |
| <4> | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:51:40.129221321 UTC) | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <7>mif: set_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x11c/0x184): | |
| <6>mif: set hsic lpa enter: active state (0), pda active (0) | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:51:41.922970421 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:52:10 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 227.472 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.417 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.830 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0 | |
| <6>Resume caused by IRQ 361, hostwake | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>wakeup wake lock: l2_hsic | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.262 msecs | |
| <6>PM: early resume of devices complete after 0.610 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 388.381 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:51:42.598531556 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:51:42.843889761 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:52:10 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.780 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.443 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.798 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.260 msecs | |
| <6>PM: early resume of devices complete after 0.610 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 405.731 msecs | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:52:10.412128042 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:52:10.651032232 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:53:21 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 230.803 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.440 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.801 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 | |
| <6>Resume caused by IRQ 373, bcmsdh_sdmmc | |
| <6>PM: noirq resume of devices complete after 1.262 msecs | |
| <6>wakeup wake lock: wlan_wake | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: early resume of devices complete after 0.667 msecs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 404.875 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:52:22.424079499 UTC) | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:52:23.005125930 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:53:22 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.783 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.444 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.798 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 | |
| <6>Resume caused by IRQ 373, bcmsdh_sdmmc | |
| <6>PM: noirq resume of devices complete after 1.264 msecs | |
| <6>wakeup wake lock: wlan_wake | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: early resume of devices complete after 0.670 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 407.728 msecs | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:52:28.412434251 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:52:29.362550096 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:53:21 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.786 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.441 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.799 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 | |
| <6>Resume caused by IRQ 373, bcmsdh_sdmmc | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.261 msecs | |
| <6>wakeup wake lock: wlan_wake | |
| <6>PM: early resume of devices complete after 0.668 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 407.165 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:52:32.415721749 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:52:33.011034761 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:53:22 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.773 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.444 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.797 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x0, 0x20 | |
| <6>Resume caused by IRQ 381, gpio_keys | |
| <7>[keys] in the sleep | |
| <6>PM: noirq resume of devices complete after 1.267 msecs | |
| <6>PM: early resume of devices complete after 0.606 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>wakeup wake lock: event1-5471 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 406.532 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:52:56.412378209 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <3>[TouchKey] touchkey is not enabled. 433 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>s3cfb s3cfb.0: +s3cfb_late_resume | |
| <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff | |
| <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2 | |
| <6>mdnie mdnie: CAMERA | |
| <6>s3cfb s3cfb.0: -s3cfb_late_resume | |
| <6>lcd panel: +ld9040_late_resume | |
| <6>lcd panel: ld9040_power_on | |
| <6>lcd panel: id=2 brightness=0, bl=1, candela=30 | |
| <6>lcd panel: -ld9040_late_resume | |
| <6>mdnie mdnie: +mdnie_late_resume | |
| <6>mdnie mdnie: CAMERA | |
| <6>mdnie mdnie: -mdnie_late_resume | |
| <6>sii9234_late_resume() | |
| <4>dhd_late_resume: enter | |
| <4>dhd_set_suspend: Remove extra suspend setting | |
| <6>lcd panel: id=2 brightness=92, bl=8, candela=100 | |
| <6>pm-hotplug: enable cpu auto-hotplug | |
| <6>powersave_late_resume: set cpu0 freq in the 200000-600000 KHz range | |
| <7>[TouchKey] sec_touchkey_late_resume | |
| <6>s5p_gpioint_set_type irq:389 is at GPL0(5) | |
| <7>LED returned on | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <3>** Up_Threshold is changed to 25 ** | |
| <6>lcd panel: id=2 brightness=88, bl=7, candela=90 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>CPU1: Booted secondary processor | |
| <3>** Up_Threshold is changed to 80 ** | |
| <6>[VIB] pwm_val_store: pwm_val=75 | |
| <6>[VIB] pwm_val_store: pwm_duty=32935 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>CPU1: Booted secondary processor | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <3>init: untracked pid 16183 exited | |
| <3>init: untracked pid 16232 exited | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <3>init: untracked pid 16237 exited | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <7>[keys]PWR 1 | |
| <7>[keys]PWR 0 | |
| <6>CPU1: Booted secondary processor | |
| <6>lcd panel: id=2 brightness=0, bl=1, candela=30 | |
| <7>[TouchKey] sec_touchkey_early_suspend | |
| <6>powersave_early_suspend: set cpu0 freq in the 200000-600000 KHz range | |
| <6>powersave_early_suspend: set cpu1 freq in the 200000-600000 KHz range | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <4>dhd_early_suspend: enter | |
| <4>dhd_set_suspend: force extra Suspend setting | |
| <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x1 | |
| <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10 | |
| <6>sii9234_early_suspend() | |
| <6>mdnie mdnie: +mdnie_early_suspend | |
| <6>mdnie mdnie: -mdnie_early_suspend | |
| <6>lcd panel: +ld9040_early_suspend | |
| <6>lcd panel: ld9040_power_off | |
| <6>lcd panel: -ld9040_early_suspend | |
| <6>+s3cfb_early_suspend | |
| <7>s3cfb - disable power domain | |
| <6>-s3cfb_early_suspend | |
| <6>active wake lock PowerManagerService.Broadcasts | |
| <6>active wake lock PowerManagerService | |
| <6>active wake lock wlan_rx_wake, time left 200 | |
| <6>sync_system + | |
| <6>sync_system - | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:53:19.955331032 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... | |
| <6>active wake lock wlan_rx_wake, time left 10 | |
| <4> | |
| <3>Freezing of user space aborted | |
| <4> | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:53:19.963035242 UTC) | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:53:20.026712539 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:53:50 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.867 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.442 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.798 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 | |
| <6>Resume caused by IRQ 373, bcmsdh_sdmmc | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.260 msecs | |
| <6>wakeup wake lock: wlan_wake | |
| <6>PM: early resume of devices complete after 0.669 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 388.291 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:53:27.392167041 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock wlan_ctrl_wake, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:53:28.011562900 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:53:49 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.852 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.436 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.798 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <6>PM: noirq resume of devices complete after 1.263 msecs | |
| <6>PM: early resume of devices complete after 0.609 msecs | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 406.863 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:53:49.454126587 UTC) | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <3>** Up_Threshold is changed to 90 ** | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:53:49.956345579 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... | |
| <6>active wake lock alarm, time left 1494 | |
| <4> | |
| <3>Freezing of user space aborted | |
| <4> | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:53:49.969487419 UTC) | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:53:50.031604978 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:54:55 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 230.831 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.448 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>active wake lock wlan_rx_wake, time left 230 | |
| <6>power_suspend_late return -11 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <3>dpm_run_callback(): platform_pm_suspend_noirq+0x0/0x8c returns -11 | |
| <3>PM: Device power.0 failed to suspend noirq: error -11 | |
| <6>PM: noirq resume of devices complete after 0.603 msecs | |
| <6>PM: early suspend of devices complete after 0.345 msecs | |
| <3>PM: Some devices failed to power down | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 402.553 msecs | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -11 (2013-01-16 08:53:50.713372173 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:53:51.079169470 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:54:55 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.845 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.445 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.795 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 | |
| <6>Resume caused by IRQ 373, bcmsdh_sdmmc | |
| <6>PM: noirq resume of devices complete after 1.264 msecs | |
| <6>wakeup wake lock: wlan_wake | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: early resume of devices complete after 0.671 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 406.580 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:53:52.412121623 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:53:53.114436321 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:54:56 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.831 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.443 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.800 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 | |
| <6>Resume caused by IRQ 373, bcmsdh_sdmmc | |
| <6>PM: noirq resume of devices complete after 1.265 msecs | |
| <6>wakeup wake lock: wlan_wake | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: early resume of devices complete after 0.671 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <6>PM: resume of devices complete after 406.036 msecs | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:53:57.412093706 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:53:58.011123533 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:54:55 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.813 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.436 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.799 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 | |
| <6>Resume caused by IRQ 373, bcmsdh_sdmmc | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.260 msecs | |
| <6>wakeup wake lock: wlan_wake | |
| <6>PM: early resume of devices complete after 0.609 msecs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 404.936 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:54:01.408272333 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>active wake lock umts_ipc0, time left 88 | |
| <6>active wake lock l2_hsic, time left 15 | |
| <6>suspend: abort suspend | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:54:04.666160494 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:54:55 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.831 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.436 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.800 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x0, 0x20 | |
| <6>Resume caused by IRQ 381, gpio_keys | |
| <7>[keys] in the sleep | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.258 msecs | |
| <6>PM: early resume of devices complete after 0.611 msecs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>wakeup wake lock: event1-5471 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 388.068 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:54:38.391571747 UTC) | |
| <6>active wake lock mmc1_detect | |
| <6>active wake lock l2_hsic | |
| <6>active wake lock sec-battery-monitor | |
| <6>active wake lock event1-5471 | |
| <6>suspend: abort suspend | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <3>[TouchKey] touchkey is not enabled. 433 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>s3cfb s3cfb.0: +s3cfb_late_resume | |
| <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff | |
| <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2 | |
| <6>mdnie mdnie: CAMERA | |
| <6>s3cfb s3cfb.0: -s3cfb_late_resume | |
| <6>lcd panel: +ld9040_late_resume | |
| <6>lcd panel: ld9040_power_on | |
| <6>lcd panel: id=2 brightness=0, bl=1, candela=30 | |
| <6>lcd panel: -ld9040_late_resume | |
| <6>mdnie mdnie: +mdnie_late_resume | |
| <6>mdnie mdnie: CAMERA | |
| <6>mdnie mdnie: -mdnie_late_resume | |
| <6>sii9234_late_resume() | |
| <4>dhd_late_resume: enter | |
| <4>dhd_set_suspend: Remove extra suspend setting | |
| <6>pm-hotplug: enable cpu auto-hotplug | |
| <6>powersave_late_resume: set cpu0 freq in the 200000-600000 KHz range | |
| <7>[TouchKey] sec_touchkey_late_resume | |
| <6>s5p_gpioint_set_type irq:389 is at GPL0(5) | |
| <7>LED returned on | |
| <3>** Up_Threshold is changed to 25 ** | |
| <6>lcd panel: id=2 brightness=87, bl=7, candela=90 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <3>** Up_Threshold is changed to 80 ** | |
| <6>[VIB] pwm_val_store: pwm_val=75 | |
| <6>[VIB] pwm_val_store: pwm_duty=32935 | |
| <6>CPU1: Booted secondary processor | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>CPU1: Booted secondary processor | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=330 | |
| <6>audss_clk_enable(1): SRC[0x1], DIV[0xf11], GATE[0x1c7] | |
| <6>G:P:DmaAddr=@61260000 Total=16384 PrdSz=4096 #Prds=4 dma_area=0xffd80000 | |
| <7>i2s_txctrl:Turn on | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <7>i2s_txctrl: Turn Off - spr is no active | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>audss_clk_enable(0): SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>lcd panel: id=2 brightness=78, bl=6, candela=80 | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <7>[keys]PWR 1 | |
| <7>[keys]PWR 0 | |
| <6>lcd panel: id=2 brightness=0, bl=1, candela=30 | |
| <7>[TouchKey] sec_touchkey_early_suspend | |
| <6>powersave_early_suspend: set cpu0 freq in the 200000-600000 KHz range | |
| <4>dhd_early_suspend: enter | |
| <4>dhd_set_suspend: force extra Suspend setting | |
| <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x1 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10 | |
| <6>sii9234_early_suspend() | |
| <6>mdnie mdnie: +mdnie_early_suspend | |
| <6>mdnie mdnie: -mdnie_early_suspend | |
| <6>lcd panel: +ld9040_early_suspend | |
| <6>lcd panel: ld9040_power_off | |
| <6>lcd panel: -ld9040_early_suspend | |
| <6>+s3cfb_early_suspend | |
| <7>s3cfb - disable power domain | |
| <6>-s3cfb_early_suspend | |
| <6>active wake lock PowerManagerService | |
| <6>active wake lock umts_ipc0, time left 67 | |
| <6>sync_system + | |
| <6>sync_system - | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:55:32.611834654 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:55:40 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 227.500 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.446 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.795 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <6>PM: noirq resume of devices complete after 1.266 msecs | |
| <6>PM: early resume of devices complete after 0.610 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 387.301 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:55:40.390553688 UTC) | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock alarm_rtc, expired | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:55:41.012777437 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16 | |
| <3>PM: Device alarm failed to suspend: error -16 | |
| <3>PM: Some devices failed to suspend | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 330.535 msecs | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:55:41.403552266 UTC) | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:55:41.659296751 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:56:01 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 230.850 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.411 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.825 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0 | |
| <6>Resume caused by IRQ 361, hostwake | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>wakeup wake lock: l2_hsic | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.261 msecs | |
| <6>PM: early resume of devices complete after 0.608 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 388.695 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:55:42.422374460 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <3>** Up_Threshold is changed to 90 ** | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:55:43.960642240 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:56:01 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.823 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.446 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.799 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.261 msecs | |
| <6>PM: early resume of devices complete after 0.608 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <6>[MSC] sii9234_enqueue_msc_work() add item, addr = 0xe0747a00, cnt=1 | |
| <6>[MSC] sii9234_enqueue_msc_work() command(0xe0), offset(0x31), data_1(0x0), data_2(0x0) | |
| <6>[MSC] sii9234_enqueue_msc_work() msc work schedule | |
| <6>sii9234_process_msc_work() - start | |
| <6>[MSC] sii9234_process_msc_work() command(0xe0), offset(0x31), data_1(0x0), data_2(0x0) | |
| <6>sii9234_process_msc_work(): msc_req_locked error -2 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 405.029 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:56:01.411970582 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:56:02.989176700 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:56:29 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 227.621 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.455 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.796 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x0, 0x20, 0x0 | |
| <6>Resume caused by IRQ 373, bcmsdh_sdmmc | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.258 msecs | |
| <6>wakeup wake lock: wlan_wake | |
| <6>PM: early resume of devices complete after 0.667 msecs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 405.817 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:56:13.411657167 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>active wake lock wlan_rx_wake, time left 300 | |
| <6>suspend: abort suspend | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <7>mif: set_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x11c/0x184): | |
| <6>mif: set hsic lpa enter: active state (0), pda active (0) | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:56:14.977323033 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:56:27 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.838 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.448 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.806 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x0, 0x0 | |
| <6>Resume caused by IRQ 361, hostwake | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>wakeup wake lock: l2_hsic | |
| <6>PM: noirq resume of devices complete after 1.265 msecs | |
| <6>PM: early resume of devices complete after 0.608 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 391.261 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:56:15.674993500 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>wake lock l2_hsic, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:56:15.922849392 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:56:27 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 250.831 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.435 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.797 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.265 msecs | |
| <6>PM: early resume of devices complete after 0.609 msecs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 405.605 msecs | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:56:27.411461957 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>active wake lock alarm, time left 1500 | |
| <6>suspend: abort suspend | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:56:27.895222132 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:56:29 | |
| <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16 | |
| <3>PM: Device alarm failed to suspend: error -16 | |
| <3>PM: Some devices failed to suspend | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 331.740 msecs | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:56:28.350432511 UTC) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <6>active wake lock wlan_rx_wake, time left 262 | |
| <6>active wake lock alarm_rtc, time left 300 | |
| <6>suspend: abort suspend | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:56:31.451134782 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:56:48 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 227.463 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.438 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.804 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x80, 0x0, 0x0, 0x0 | |
| <6>Resume caused by IRQ 359, max8997-irq | |
| <6>PM: noirq resume of devices complete after 1.262 msecs | |
| <6>PM: early resume of devices complete after 0.609 msecs | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>wakeup wake lock: sec-battery-monitor | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 407.948 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:56:48.412073667 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:56:53.882431717 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... | |
| <6>active wake lock wlan_rx_wake, time left 243 | |
| <4> | |
| <3>Freezing of user space aborted | |
| <4> | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:56:53.893628885 UTC) | |
| <7>mif: set_hsic_lpa_states: 279: called(exynos4_check_usb_op+0x11c/0x184): | |
| <6>mif: set hsic lpa enter: active state (0), pda active (0) | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:56:56.314545836 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <6>mif: link_pm_notifier_event: PDA active High to LPA suspend spot | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:57:00 | |
| <6>wake enabled for irq 359 | |
| <6>sec_jack_suspend: enable_irq_wake(0) | |
| <6>s5p_int_src_ext_hpd() | |
| <6>wake enabled for irq 375 | |
| <6>wake enabled for irq 381 | |
| <6>sdhci_suspend_host : Enter WIFI suspend | |
| <4>bcmsdh_sdmmc_suspend Enter | |
| <6>u1_enable_regulator_for_usb_mipi: disable LDOs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card OFF samsung-mshc. | |
| <6>PM: suspend of devices complete after 227.515 msecs | |
| <4>suspend_set_state: LED_A_2.8V: No configuration | |
| <6>PM: late suspend of devices complete after 0.443 msecs | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.7- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.6- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.5- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.3- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.1- | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0+ | |
| <7>platform_pm_suspend_noirq: s3c2440-i2c.0- | |
| <7>platform_pm_suspend_noirq: power.0+ | |
| <6>power_suspend_late return 0 | |
| <7>platform_pm_suspend_noirq: power.0- | |
| <6>PM: noirq suspend of devices complete after 0.803 msecs | |
| <4>Disabling non-boot CPUs ... | |
| <1>PM: SLEEP | |
| <1>ARM_COREx_STATUS CORE1[0x00070000], CORE2[0x00000000], CORE3[0x00000000] | |
| <6>WAKEUP_STAT: 0x80000001 | |
| <6>WAKEUP_INTx_PEND: 0x0, 0x2, 0x20, 0x0 | |
| <6>Resume caused by IRQ 361, hostwake | |
| <6>Resume caused by IRQ 373, bcmsdh_sdmmc | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>wakeup wake lock: l2_hsic | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <3>calc_bus_utilization: 0 value is not permitted | |
| <6>PM: noirq resume of devices complete after 1.262 msecs | |
| <6>PM: early resume of devices complete after 0.670 msecs | |
| <6>exynos4_setup_mshci_set_power : internal MMC Card ON samsung-mshc. | |
| <6>mmc0: FIFO WMARK FOR RX 0x20 WX 0x10. ########### | |
| <6>u1_enable_regulator_for_usb_mipi: enable LDOs | |
| <6>sdhci_resume_host : MMC Card ON | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <4>bcmsdh_sdmmc_resume Enter | |
| <6>wake disabled for irq 375 | |
| <7>[keys]PWR 0 | |
| <6>wake disabled for irq 381 | |
| <6>s3c-rtc exynos-rtc: rtc disabled, re-enabling | |
| <6>sec_jack_resume: disable_irq_wake(0) | |
| <6>wake disabled for irq 359 | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 395.087 msecs | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <6>mif: iodev_netif_wake: rmnet0 | |
| <6>mif: iodev_netif_wake: rmnet1 | |
| <6>mif: iodev_netif_wake: rmnet2 | |
| <6>mif: link_rx_flowctl_cmd: flowctl CMD_RESUME(00CB) | |
| <4>Restarting tasks ... | |
| <6>notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0 | |
| <6>normal: free cpufreq_limit & interrupt enable. | |
| <4>done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = 0 (2013-01-16 08:56:56.998744283 UTC) | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>sdhci_set_ios : MMC Card OFF samsung-hsmmc | |
| <6>active wake lock wlan_rx_wake, time left 300 | |
| <6>suspend: abort suspend | |
| <3>[TouchKey] touchkey is not enabled. 433 | |
| <6>s3cfb s3cfb.0: +s3cfb_late_resume | |
| <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff | |
| <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2 | |
| <6>mdnie mdnie: CAMERA | |
| <6>s3cfb s3cfb.0: -s3cfb_late_resume | |
| <6>lcd panel: +ld9040_late_resume | |
| <6>lcd panel: ld9040_power_on | |
| <6>lcd panel: id=2 brightness=0, bl=1, candela=30 | |
| <6>lcd panel: -ld9040_late_resume | |
| <6>mdnie mdnie: +mdnie_late_resume | |
| <6>mdnie mdnie: CAMERA | |
| <6>mdnie mdnie: -mdnie_late_resume | |
| <6>sii9234_late_resume() | |
| <4>dhd_late_resume: enter | |
| <4>dhd_set_suspend: Remove extra suspend setting | |
| <6>lcd panel: id=2 brightness=75, bl=6, candela=80 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>pm-hotplug: enable cpu auto-hotplug | |
| <6>powersave_late_resume: set cpu0 freq in the 200000-600000 KHz range | |
| <7>[TouchKey] sec_touchkey_late_resume | |
| <6>s5p_gpioint_set_type irq:389 is at GPL0(5) | |
| <7>LED returned on | |
| <3>** Up_Threshold is changed to 25 ** | |
| <6>lcd panel: id=2 brightness=79, bl=7, candela=90 | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <3>** Up_Threshold is changed to 80 ** | |
| <6>[VIB] pwm_val_store: pwm_val=75 | |
| <6>[VIB] pwm_val_store: pwm_duty=32935 | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>CPU1: Booted secondary processor | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>CPU1: Booted secondary processor | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=350 | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>CPU1: Booted secondary processor | |
| <3>init: untracked pid 17582 exited | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <3>init: untracked pid 17614 exited | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>CPU1: Booted secondary processor | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>CPU1: Booted secondary processor | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=360 | |
| <6>CPU1: Booted secondary processor | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>CPU1: Booted secondary processor | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>CPU1: Booted secondary processor | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>lcd panel: id=2 brightness=89, bl=8, candela=100 | |
| <6>lcd panel: id=2 brightness=85, bl=7, candela=90 | |
| <6>lcd panel: id=2 brightness=75, bl=6, candela=80 | |
| <6>lcd panel: id=2 brightness=65, bl=5, candela=70 | |
| <6>lcd panel: id=2 brightness=55, bl=4, candela=60 | |
| <6>lcd panel: id=2 brightness=45, bl=3, candela=50 | |
| <6>lcd panel: id=2 brightness=35, bl=2, candela=40 | |
| <6>lcd panel: id=2 brightness=29, bl=1, candela=30 | |
| <6>CPU1: Booted secondary processor | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <7>[TouchKey] sec_touchkey_early_suspend | |
| <6>powersave_early_suspend: set cpu0 freq in the 200000-600000 KHz range | |
| <6>powersave_early_suspend: set cpu1 freq in the 200000-600000 KHz range | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <4>dhd_early_suspend: enter | |
| <4>dhd_set_suspend: force extra Suspend setting | |
| <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x1 | |
| <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10 | |
| <6>sii9234_early_suspend() | |
| <6>mdnie mdnie: +mdnie_early_suspend | |
| <6>mdnie mdnie: -mdnie_early_suspend | |
| <6>lcd panel: +ld9040_early_suspend | |
| <6>lcd panel: ld9040_power_off | |
| <6>lcd panel: -ld9040_early_suspend | |
| <6>+s3cfb_early_suspend | |
| <7>s3cfb - disable power domain | |
| <6>-s3cfb_early_suspend | |
| <6>active wake lock PowerManagerService | |
| <6>active wake lock PowerManagerService.Broadcasts | |
| <6>active wake lock wlan_rx_wake, time left 120 | |
| <6>sync_system + | |
| <3>[TouchKey] touchkey is not enabled. 433 | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>s3cfb s3cfb.0: +s3cfb_late_resume | |
| <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff | |
| <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2 | |
| <6>mdnie mdnie: CAMERA | |
| <6>s3cfb s3cfb.0: -s3cfb_late_resume | |
| <6>lcd panel: +ld9040_late_resume | |
| <6>lcd panel: ld9040_power_on | |
| <6>lcd panel: id=2 brightness=0, bl=1, candela=30 | |
| <6>lcd panel: -ld9040_late_resume | |
| <6>mdnie mdnie: +mdnie_late_resume | |
| <6>mdnie mdnie: CAMERA | |
| <6>mdnie mdnie: -mdnie_late_resume | |
| <6>sii9234_late_resume() | |
| <4>dhd_late_resume: enter | |
| <4>dhd_set_suspend: Remove extra suspend setting | |
| <6>lcd panel: id=2 brightness=66, bl=5, candela=70 | |
| <6>lcd panel: id=2 brightness=72, bl=6, candela=80 | |
| <6>lcd panel: id=2 brightness=79, bl=7, candela=90 | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>lcd panel: id=2 brightness=89, bl=8, candela=100 | |
| <6>pm-hotplug: enable cpu auto-hotplug | |
| <6>powersave_late_resume: set cpu0 freq in the 200000-1200000 KHz range | |
| <7>[TouchKey] sec_touchkey_late_resume | |
| <6>s5p_gpioint_set_type irq:389 is at GPL0(5) | |
| <7>LED returned on | |
| <6>sync_system - | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <3>** Up_Threshold is changed to 90 ** | |
| <3>** Up_Threshold is changed to 25 ** | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <3>** Up_Threshold is changed to 80 ** | |
| <6>[VIB] pwm_val_store: pwm_val=75 | |
| <6>[VIB] pwm_val_store: pwm_duty=32935 | |
| <6>CPU1: Booted secondary processor | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <6>lcd panel: id=2 brightness=86, bl=7, candela=90 | |
| <6>lcd panel: id=2 brightness=76, bl=6, candela=80 | |
| <6>lcd panel: id=2 brightness=66, bl=5, candela=70 | |
| <6>lcd panel: id=2 brightness=56, bl=4, candela=60 | |
| <6>lcd panel: id=2 brightness=46, bl=3, candela=50 | |
| <6>lcd panel: id=2 brightness=32, bl=2, candela=40 | |
| <6>lcd panel: id=2 brightness=29, bl=1, candela=30 | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>CPU1: Booted secondary processor | |
| <7>[TouchKey] sec_touchkey_early_suspend | |
| <6>powersave_early_suspend: set cpu0 freq in the 200000-600000 KHz range | |
| <6>powersave_early_suspend: set cpu1 freq in the 200000-600000 KHz range | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <4>dhd_early_suspend: enter | |
| <4>dhd_set_suspend: force extra Suspend setting | |
| <4>Do not turn on ARP white list pkt filter:val 1, cnt 5, op_mode 0x1 | |
| <4>dhd_get_suspend_bcn_li_dtim bcn_li_dtim=0 DTIM=1 Listen=10 | |
| <6>sii9234_early_suspend() | |
| <6>mdnie mdnie: +mdnie_early_suspend | |
| <6>mdnie mdnie: -mdnie_early_suspend | |
| <6>lcd panel: +ld9040_early_suspend | |
| <6>lcd panel: ld9040_power_off | |
| <6>lcd panel: -ld9040_early_suspend | |
| <6>+s3cfb_early_suspend | |
| <7>s3cfb - disable power domain | |
| <6>-s3cfb_early_suspend | |
| <6>active wake lock PowerManagerService | |
| <6>active wake lock PowerManagerService.Broadcasts | |
| <6>active wake lock wlan_rx_wake, time left 81 | |
| <6>sync_system + | |
| <6>sync_system - | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:58:40.449263841 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... | |
| <6>active wake lock wlan_rx_wake, time left 35 | |
| <4> | |
| <3>Freezing of user space aborted | |
| <4> | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:58:40.458304383 UTC) | |
| <6>wake lock wlan_rx_wake, expired | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:58:40.575154728 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:58:42 | |
| <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16 | |
| <3>PM: Device alarm failed to suspend: error -16 | |
| <3>PM: Some devices failed to suspend | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 321.881 msecs | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:58:41.021153562 UTC) | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <6>active wake lock alarm_rtc, time left 300 | |
| <6>suspend: abort suspend | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <6>active wake lock alarm, time left 1500 | |
| <6>suspend: abort suspend | |
| <6>suspend: enter suspend | |
| <6>suspend: enter suspend, (2013-01-16 08:58:43.407631137 UTC) | |
| <6>PM: Syncing filesystems ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: saving pm_hotplug lock 0 | |
| <4>Freezing user space processes ... (elapsed 0.01 seconds) done. | |
| <4>Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. | |
| <4>Suspending console(s) (use no_console_suspend to debug) | |
| <6>audss_reg_save: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <7>pmu_debug: 0x00000901 | |
| <7>xusbxti_control: 0 | |
| <3>[MODEM_IF]Active States =0, s5p-ehci | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_set_alarm: 2013-01-16 08:58:44 | |
| <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16 | |
| <3>PM: Device alarm failed to suspend: error -16 | |
| <3>PM: Some devices failed to suspend | |
| <7>mif: set_hsic_lpa_states: 279: called(s5p_usb_phy_init+0x128/0x564): | |
| <6>[MODEM_IF]Slave Wake | |
| <6>mif: set hsic lpa phy init: slave wake-up (1) | |
| <6>s5p-ehci s5p-ehci: usb phy usage(2) | |
| <4>usb usb1: root hub lost power or was reset | |
| <3>[MODEM_IF]Active States =1, s5p-ehci | |
| <7>pmu_debug: 0x00000900 | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>audss_reg_restore: SRC[0x1], DIV[0xf11], GATE[0x42] | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x2 | |
| <6>max8997-rtc max8997-rtc: max8997_rtc_alarm_irq:irq(437) | |
| <6>max8997 5-0066: max8997_irq_thread: irq:359, irq_src:0x0 | |
| <4>max8997 5-0066: Unused interrupt source: 0x0 | |
| <6>mif: usb_port_resume: 1281, 0 | |
| <6>usb 1-2: reset high speed USB device number 2 using s5p-ehci | |
| <6>mif: link_pm_irq_handler: ignore request by suspending | |
| <6>mif: link_pm_runtime_start: rpm_status: 0 | |
| <6>mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci | |
| <6>PM: resume of devices complete after 331.279 msecs | |
| <4>Restarting tasks ... done. | |
| <6>exynos4_pm_hotplug_notifier_event: restoring pm_hotplug lock 0 | |
| <6>suspend: exit suspend, ret = -16 (2013-01-16 08:58:43.865196475 UTC) | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 3 msec | |
| <3>** Up_Threshold is changed to 90 ** | |
| <3>[TouchKey] touchkey is not enabled. 433 | |
| <6>s3cfb s3cfb.0: +s3cfb_late_resume | |
| <6>s3cfb s3cfb.0: fimd sclk rate 50000000, clkdiv 0x7000ff | |
| <6>s3cfb s3cfb.0: parent clock: 50000000, vclk: 25067000, vclk div: 2 | |
| <6>mdnie mdnie: CAMERA | |
| <6>s3cfb s3cfb.0: -s3cfb_late_resume | |
| <6>lcd panel: +ld9040_late_resume | |
| <6>lcd panel: ld9040_power_on | |
| <6>mif: usb_port_resume: 1283, 4 | |
| <6>lcd panel: id=2 brightness=0, bl=1, candela=30 | |
| <6>lcd panel: -ld9040_late_resume | |
| <6>mdnie mdnie: +mdnie_late_resume | |
| <6>mdnie mdnie: CAMERA | |
| <6>mdnie mdnie: -mdnie_late_resume | |
| <6>sii9234_late_resume() | |
| <4>dhd_late_resume: enter | |
| <4>dhd_set_suspend: Remove extra suspend setting | |
| <6>lcd panel: id=2 brightness=44, bl=3, candela=50 | |
| <6>lcd panel: id=2 brightness=80, bl=7, candela=90 | |
| <6>lcd panel: id=2 brightness=89, bl=8, candela=100 | |
| <6>pm-hotplug: enable cpu auto-hotplug | |
| <6>powersave_late_resume: set cpu0 freq in the 200000-600000 KHz range | |
| <7>[TouchKey] sec_touchkey_late_resume | |
| <6>s5p_gpioint_set_type irq:389 is at GPL0(5) | |
| <7>LED returned on | |
| <3>** Up_Threshold is changed to 25 ** | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>logger_release: took 0 msec | |
| <6>s5p-ehci s5p-ehci: host_phy_susp | |
| <3>** Up_Threshold is changed to 80 ** | |
| <6>[VIB] pwm_val_store: pwm_val=75 | |
| <6>[VIB] pwm_val_store: pwm_duty=32935 | |
| <6>CPU1: Booted secondary processor | |
| <4>IRQ112 no longer affine to CPU1 | |
| <5>CPU1: shutdown | |
| <6>CPU1: Booted secondary processor | |
| <6>sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=350 | |
| <6>sec-battery sec-battery: sec_bat_check_temper: recovery count = 0 | |
| <6>sec-battery sec-battery: sec_bat_charging_time_management: charging_start_time has never been used since initializing | |
| <6>max8922-charger max8922-charger: max8922_is_charging: charging state = 0x3 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment