gistfile1.txt

U-Boot SPL 2013.01-05504-g845cd90-dirty (Feb 18 2013 - 03:14:38)


U-Boot 2013.01-05504-g845cd90-dirty (Feb 18 2013 - 03:14:38)

TEGRA20
Board: Compal Paz00
DRAM:  512 MiB
MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
*** Warning - bad CRC, using default environment

In:    serial
Out:   lcd
Err:   lcd
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0
mmc1 is current device
Scanning mmc 1...
reading /boot.scr.uimg
** Unable to read file /boot.scr.uimg **
reading /boot.scr
539 bytes read in 14 ms (37.1 KiB/s)
boot.scr found! Executing ...
## Executing script at 10000000
=== boot.scr: boot from external SD card ===
mmc1 is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Bad Linux ARM zImage magic!
reading /boot/boot.scr.uimg
** Unable to read file /boot/boot.scr.uimg **
reading /boot/boot.scr
539 bytes read in 17 ms (30.3 KiB/s)
boot.scr found! Executing ...
## Executing script at 10000000
=== boot.scr: boot from external SD card ===
mmc1 is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Bad Linux ARM zImage magic!
mmc0(part 0) is current device
Scanning mmc 0...
** No partition table - mmc 0 **
** No partition table - mmc 0 **
** No partition table - mmc 0 **
** No partition table - mmc 0 **
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... usb_get_configuration_no: failed to get descriptor - too long: 943
usb_new_device: Cannot read configuration, skipping device 0bda:58f2
3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found

USB device 0: unknown device
No ethernet found.
Tegra20 (Paz00) MOD #