Created
November 25, 2014 08:51
-
-
Save anonymous/508a53adfd27d50eabf4 to your computer and use it in GitHub Desktop.
wtf.log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| / # DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 283035 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287835 | |
| 1511922 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] n | |
| sh: can't access tty; job control turned off | |
| / # net-kexec | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| random: nonblocking pool is initialized | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc5-next-20141121 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #11 SMP Tue Nov 25 06:41:43 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=PARTUUID=1d1a9248-9163-460d-b7d3-8a93b184dd11 rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072776K/2097152K available (4575K kernel code, 233K rwdata, 1516K rodata, 252K init, 322K bss, 24376K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc05faf54 (6092 kB) | |
| .init : 0xc05fb000 - 0xc063a000 ( 252 kB) | |
| .data : 0xc063a000 - 0xc06747b8 ( 234 kB) | |
| .bss : 0xc06747b8 - 0xc06c4ff0 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| rockchip_smp_prepare_cpus: ncores 4 | |
| Setting up static identity map for 0x6047d4b8 - 0x6047d510 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: Mode Mismatch Interrupt: currently in Device mode | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.usb | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.usb: DWC OTG Controller | |
| dwc2 101c0000.usb: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.usb: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.usb | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| usbcore: registered new interface driver usb-storage | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| rtc (null): read_time: fail to read | |
| rtc-hym8563 1-0051: rtc core: registered hym8563 as rtc0 | |
| rk3x-i2c 2002f000.i2c: Initialized RK3xxx I2C bus at f0098000 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Driver 'mmcblk' needs updating - please use bus_type methods | |
| Synopsys Designware Multimedia Card Interface Driver | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| Key type dns_resolver registered | |
| Registering SWP/SWPB emulation handler | |
| sdmmc-supply: supplied by VCC_IO | |
| rockchip_emac 10204000.ethernet: ARC EMAC detected with id: 0x7fd02 | |
| rockchip_emac 10204000.ethernet: IRQ is 51 | |
| rockchip_emac 10204000.ethernet: MAC address is now b6:c5:30:31:ea:45 | |
| libphy: Synopsys MII Bus: probed | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| rockchip_emac 10204000.ethernet: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| rtc rtc0: read_time: fail to read | |
| rtc-hym8563 1-0051: hctosys: unable to read the hardware clock | |
| sdmmc-supply: disabling | |
| Waiting for root device PARTUUID=1d1a9248-9163-460d-b7d3-8a93b184dd11... | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0724 | |
| usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.1: Product: 802.11n WLAN Adapter | |
| usb 2-1.1: Manufacturer: Realtek | |
| usb 2-1.1: SerialNumber: 00e04c000001 | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: New USB device found, idVendor=13fe, idProduct=5200 | |
| usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.3: Product: USB DISK 3.0 | |
| usb 2-1.3: Manufacturer: | |
| usb 2-1.3: SerialNumber: 0702372B957B0650 | |
| usb-storage 2-1.3:1.0: USB Mass Storage device detected | |
| scsi host0: usb-storage 2-1.3:1.0 | |
| random: nonblocking pool is initialized | |
| scsi 0:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 | |
| sd 0:0:0:0: [sda] 60566016 512-byte logical blocks: (31.0 GB/28.8 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
| sda: sda1 | |
| sd 0:0:0:0: [sda] Attached SCSI removable disk | |
| DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 282926 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287777 | |
| 1512375 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] n | |
| sh: can't access tty; job control turned off | |
| / # net-kexec | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| random: nonblocking pool is initialized | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc5-next-20141121 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #11 SMP Tue Nov 25 06:41:43 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=PARTUUID=1d1a9248-9163-460d-b7d3-8a93b184dd11 rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072776K/2097152K available (4575K kernel code, 233K rwdata, 1516K rodata, 252K init, 322K bss, 24376K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc05faf54 (6092 kB) | |
| .init : 0xc05fb000 - 0xc063a000 ( 252 kB) | |
| .data : 0xc063a000 - 0xc06747b8 ( 234 kB) | |
| .bss : 0xc06747b8 - 0xc06c4ff0 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| rockchip_smp_prepare_cpus: ncores 4 | |
| Setting up static identity map for 0x6047d4b8 - 0x6047d510 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: Mode Mismatch Interrupt: currently in Device mode | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.usb | |
| hub 1-0:1.0: USB hub found | |
| Internal error: Oops - undefined instruction: 0 [#1] SMP ARM | |
| Modules linked in: | |
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc5-next-20141121 #11 | |
| task: ee05db40 ti: ee05e000 task.ti: ee05e000 | |
| PC is at usb_hcd_submit_urb+0x608/0x8c4 | |
| LR is at usb_hcd_submit_urb+0x5fc/0x8c4 | |
| pc : [<c0284320>] lr : [<c0284314>] psr: 60000113 | |
| sp : ee05f7c0 ip : 00002900 fp : ee05f87c | |
| r10: ee0eb840 r9 : 0000000f r8 : c0297868 | |
| r7 : 0000000f r6 : 0000a006 r5 : ee0e6a00 r4 : ee0ec500 | |
| r3 : 0000a006 r2 : ffffffff r1 : 00000008 r0 : 00000000 | |
| Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel | |
| Control: 10c5387d Table: 6000404a DAC: 00000015 | |
| Process swapper/0 (pid: 1, stack limit = 0xee05e240) | |
| Stack: (0xee05f7c0 to 0xee060000) | |
| f7c0: ee0eb840 0000000f 00000006 ee05f8ec 00000021 00002900 00002900 c06b971c | |
| f7e0: 00000000 ee0eb8c0 00000006 ee05f8ec c057375c ee0e6620 00000072 c0584bba | |
| f800: ee05f8cc ee05f810 c0244c78 c005349c c057375c ee05f8ec ee05f83c ee05f828 | |
| f820: 53425553 45545359 73753d4d 45440062 45434956 73752b3d 2d313a62 2e313a30 | |
| f840: 00000030 ee07641c 60000193 c0638580 c06b1d80 00000040 ee0ec500 ee0d8000 | |
| f860: 00000200 00000000 00000010 00000002 ee05f8c4 ee05f880 c02857d0 c0283d24 | |
| f880: ee05f8ac ee05f890 c06b6890 00000004 ee02dcc8 0000107e 00000000 ee0ec500 | |
| f8a0: 00000000 ee05f8dc ee05f91c 00001388 000000a0 00000000 ee05f914 ee05f8c8 | |
| f8c0: c0285ea4 c02853a4 ee0eb880 00000010 ee05f8fc ee05f8e0 c00c1cac 00000000 | |
| f8e0: 00000000 ee05f8e4 ee05f8e4 ee0ec500 ee05f914 ee0eb880 0000000f 80000180 | |
| f900: ee0d8000 00000006 ee05f944 ee05f918 c0286034 c0285e64 ee05f944 ee05f928 | |
| f920: ee0e6400 ee0e6620 ee0d8000 00000003 ee0eb8c0 00002900 ee05f9c4 ee05f948 | |
| f940: c02812f4 c0285f98 00002900 00000000 ee0eb8c0 0000000f 00001388 ee05f968 | |
| f960: c011aae0 ee0e91c0 0000000f ee0e6600 ee0d80cc 60000113 ee0e6600 c04a2f58 | |
| f980: ee05f9ac ee05f990 ee05f9ac ee05f998 c047b598 c0479ddc ee0d8000 ee0e6620 | |
| f9a0: 00000000 ee0d8000 c0658e94 ee0e6600 c04a2f58 00000000 ee05f9f4 ee05f9c8 | |
| f9c0: c0289e70 c0281014 c0289ce4 ee0e6620 c0658e94 c06b922c 00000000 c066e518 | |
| f9e0: 00000000 c06b9208 ee05fa24 ee05f9f8 c0248564 c0289cf0 ee0e6600 c0658e94 | |
| fa00: c0658e94 ee0e6620 c024876c ee0d8068 00000000 c0658f38 ee05fa3c ee05fa28 | |
| fa20: c024879c c0248430 00000000 ee0e6620 ee05fa64 ee05fa40 c0246a38 c0248778 | |
| fa40: ee1a8b70 ee193138 c047b598 ee0e6620 c0658f50 ee0e6654 ee05fa84 ee05fa68 | |
| fa60: c02483ac c02469b8 00000001 ee0e6620 c0658f50 ee0e6620 ee05faa4 ee05fa88 | |
| fa80: c024791c c024834c 00000000 ee0e6620 ee0e6628 00000000 ee05fae4 ee05faa8 | |
| faa0: c0245c18 c02478f8 ee05facc ee05fab8 c047b598 c0479ddc ee0e6a00 ee0d8000 | |
| fac0: ee0e6850 ee0e6600 00000001 ee0e6850 c066f550 00000050 ee05fb54 ee05fae8 | |
| fae0: c02881a0 c0245830 00000001 00000000 00000000 00000000 00001388 ee0e8308 | |
| fb00: ee05fb2c ee0ef128 ee0d8068 ee0ebb04 ee0ebb04 ee0e6850 00000004 ee0e6a00 | |
| fb20: ee0e9188 00000001 c0290efc ee0d8000 00000001 c06b922c 00000000 c066e518 | |
| fb40: 00000000 c06b9208 ee05fb6c ee05fb58 c0291104 c0287b58 ee0d8000 c0659618 | |
| fb60: ee05fb84 ee05fb70 c0289cc0 c02910cc ee0d8068 c0659618 ee05fbb4 ee05fb88 | |
| fb80: c0248564 c0289c7c ee0d7000 c0650394 c0659618 ee0d8068 c024876c ee12cc10 | |
| fba0: 00000000 c0658dfc ee05fbcc ee05fbb8 c024879c c0248430 00000000 ee0d8068 | |
| fbc0: ee05fbf4 ee05fbd0 c0246a38 c0248778 ee1a8b70 ee1930b8 c047b598 ee0d8068 | |
| fbe0: c0658f50 ee0d809c ee05fc14 ee05fbf8 c02483ac c02469b8 00000001 ee0d8068 | |
| fc00: c0658f50 ee0d8068 ee05fc34 ee05fc18 c024791c c024834c 00000000 ee0d8068 | |
| fc20: ee0d8070 00000000 ee05fc74 ee05fc38 c0245c18 c02478f8 39383110 0000303a | |
| fc40: ee05fc74 ee05fc50 c02278a0 ee0d8000 ee0d8068 ee0e9200 00000000 ee0e6ae0 | |
| fc60: ee12cc10 00000001 ee05fcb4 ee05fc78 c027ee4c c0245830 00000001 ee0e6ae0 | |
| fc80: ee05fcb4 ee05fc90 c0287204 ee0e6a00 00000012 ee0d8000 00000030 ee0e6ae0 | |
| fca0: ee12cc10 00000001 ee05fcf4 ee05fcb8 c0283a78 c027eb9c 00000000 00000000 | |
| fcc0: c029a49c ee0d8000 ee05fcf4 ee0d8410 c0033f40 c06ac8f0 00000000 ee0e6a00 | |
| fce0: ffffffe0 00000030 ee05fd34 ee05fcf8 c029a4f8 c02835c4 00000000 c05896c9 | |
| fd00: ee05fd34 ee0d854c c02c34a8 ee12cc00 ee0d8410 ee12cc10 c04a4ae4 c0670930 | |
| fd20: 00000030 ee12a840 ee05fddc ee05fd38 c029eb80 c029a0cc 00000080 ee12a800 | |
| fd40: ee0d8410 ee05fd50 c039a29c c030830c c011acf4 c011aaf8 00000004 ee12b4e8 | |
| fd60: ee05fd84 ee05fd70 c011aae0 ee0e83a8 ee0e8448 ee12b4e8 ee05fda4 ee0e83a8 | |
| fd80: ee0e8448 c057b1df ee12b4e8 00000001 00000000 00000000 ee05fdcc ee05fda8 | |
| fda0: c011cfa4 c0119c70 00000001 ee12cc10 00000000 ffffffed ee12cc10 c06597b4 | |
| fdc0: 00000000 c066e518 00000000 00000000 ee05fdfc ee05fde0 c0249f80 c029e9f4 | |
| fde0: c0249f30 ee12cc10 c06597b4 c06b922c ee05fe2c ee05fe00 c0248564 c0249f3c | |
| fe00: ee05fe2c ee05fe10 ee12cc10 ee12cc44 c06597b4 c06572e8 c0644da0 c06747c0 | |
| fe20: ee05fe4c ee05fe30 c0248828 c0248430 00000001 00000000 c06597b4 c02487b8 | |
| fe40: ee05fe74 ee05fe50 c0246964 c02487c4 ee03795c ee125834 ee037970 c06597b4 | |
| fe60: 00000000 ee0ecf80 ee05fe84 ee05fe78 c0247f90 c02468fc ee05feac ee05fe88 | |
| fe80: c0247bc8 c0247f7c c04a4bac ee05fe98 c06597b4 c0613ed4 00000000 c0644da0 | |
| fea0: ee05fec4 ee05feb0 c0248ee4 c0247ac8 ee0ebe00 c0613ed4 ee05fed4 ee05fec8 | |
| fec0: c0249eb4 c0248e4c ee05fee4 ee05fed8 c0613eec c0249e70 ee05ff5c ee05fee8 | |
| fee0: c0008a4c c0613ee0 ee05ff04 ee0faa00 ee05ff14 ee05ff00 c0038b00 c0038ad8 | |
| ff00: ef7fcc9d 00000000 ee05ff5c ee05ff18 c0038e2c c05fb608 00000000 c01d4b6c | |
| ff20: 000000d2 00000006 00000006 000000d3 00000000 00000006 00000006 000000d3 | |
| ff40: c0629a2c c0636818 c06747c0 c06747c0 ee05ff94 ee05ff60 c05fbe10 c000893c | |
| ff60: 00000006 00000006 c05fb5fc ee033040 00000000 c0476c58 00000000 00000000 | |
| ff80: 00000000 00000000 ee05ffac ee05ff98 c0476c68 c05fbd00 ee05e000 00000000 | |
| ffa0: 00000000 ee05ffb0 c000ea58 c0476c64 00000000 00000000 00000000 00000000 | |
| ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff | |
| Backtrace: | |
| [<c0283d18>] (usb_hcd_submit_urb) from [<c02857d0>] (usb_submit_urb+0x438/0x478) | |
| r10:00000002 r9:00000010 r8:00000000 r7:00000200 r6:ee0d8000 r5:ee0ec500 | |
| r4:00000040 | |
| [<c0285398>] (usb_submit_urb) from [<c0285ea4>] (usb_start_wait_urb+0x4c/0x134) | |
| r10:00000000 r9:000000a0 r8:00001388 r7:ee05f91c r6:ee05f8dc r5:00000000 | |
| r4:ee0ec500 | |
| [<c0285e58>] (usb_start_wait_urb) from [<c0286034>] (usb_control_msg+0xa8/0xd0) | |
| r8:00000006 r7:ee0d8000 r6:80000180 r5:0000000f r4:ee0eb880 | |
| [<c0285f8c>] (usb_control_msg) from [<c02812f4>] (hub_probe+0x2ec/0xc64) | |
| r9:00002900 r8:ee0eb8c0 r7:00000003 r6:ee0d8000 r5:ee0e6620 r4:ee0e6400 | |
| [<c0281008>] (hub_probe) from [<c0289e70>] (usb_probe_interface+0x18c/0x244) | |
| r10:00000000 r9:c04a2f58 r8:ee0e6600 r7:c0658e94 r6:ee0d8000 r5:00000000 | |
| r4:ee0e6620 | |
| [<c0289ce4>] (usb_probe_interface) from [<c0248564>] (driver_probe_device+0x140/0x348) | |
| r10:c06b9208 r9:00000000 r8:c066e518 r7:00000000 r6:c06b922c r5:c0658e94 | |
| r4:ee0e6620 r3:c0289ce4 | |
| [<c0248424>] (driver_probe_device) from [<c024879c>] (__device_attach+0x30/0x4c) | |
| r9:c0658f38 r8:00000000 r7:ee0d8068 r6:c024876c r5:ee0e6620 r4:c0658e94 | |
| [<c024876c>] (__device_attach) from [<c0246a38>] (bus_for_each_drv+0x8c/0x9c) | |
| r5:ee0e6620 r4:00000000 | |
| [<c02469ac>] (bus_for_each_drv) from [<c02483ac>] (device_attach+0x6c/0x90) | |
| r6:ee0e6654 r5:c0658f50 r4:ee0e6620 | |
| [<c0248340>] (device_attach) from [<c024791c>] (bus_probe_device+0x30/0xa0) | |
| r6:ee0e6620 r5:c0658f50 r4:ee0e6620 r3:00000001 | |
| [<c02478ec>] (bus_probe_device) from [<c0245c18>] (device_add+0x3f4/0x510) | |
| r6:00000000 r5:ee0e6628 r4:ee0e6620 r3:00000000 | |
| [<c0245824>] (device_add) from [<c02881a0>] (usb_set_configuration+0x654/0x6ec) | |
| r10:00000050 r9:c066f550 r8:ee0e6850 r7:00000001 r6:ee0e6600 r5:ee0e6850 | |
| r4:ee0d8000 | |
| [<c0287b4c>] (usb_set_configuration) from [<c0291104>] (generic_probe+0x44/0x7c) | |
| r10:c06b9208 r9:00000000 r8:c066e518 r7:00000000 r6:c06b922c r5:00000001 | |
| r4:ee0d8000 | |
| [<c02910c0>] (generic_probe) from [<c0289cc0>] (usb_probe_device+0x50/0x74) | |
| r5:c0659618 r4:ee0d8000 | |
| [<c0289c70>] (usb_probe_device) from [<c0248564>] (driver_probe_device+0x140/0x348) | |
| r5:c0659618 r4:ee0d8068 | |
| [<c0248424>] (driver_probe_device) from [<c024879c>] (__device_attach+0x30/0x4c) | |
| r9:c0658dfc r8:00000000 r7:ee12cc10 r6:c024876c r5:ee0d8068 r4:c0659618 | |
| [<c024876c>] (__device_attach) from [<c0246a38>] (bus_for_each_drv+0x8c/0x9c) | |
| r5:ee0d8068 r4:00000000 | |
| [<c02469ac>] (bus_for_each_drv) from [<c02483ac>] (device_attach+0x6c/0x90) | |
| r6:ee0d809c r5:c0658f50 r4:ee0d8068 | |
| [<c0248340>] (device_attach) from [<c024791c>] (bus_probe_device+0x30/0xa0) | |
| r6:ee0d8068 r5:c0658f50 r4:ee0d8068 r3:00000001 | |
| [<c02478ec>] (bus_probe_device) from [<c0245c18>] (device_add+0x3f4/0x510) | |
| r6:00000000 r5:ee0d8070 r4:ee0d8068 r3:00000000 | |
| [<c0245824>] (device_add) from [<c027ee4c>] (usb_new_device+0x2bc/0x418) | |
| r10:00000001 r9:ee12cc10 r8:ee0e6ae0 r7:00000000 r6:ee0e9200 r5:ee0d8068 | |
| r4:ee0d8000 | |
| [<c027eb90>] (usb_new_device) from [<c0283a78>] (usb_add_hcd+0x4c0/0x760) | |
| r10:00000001 r9:ee12cc10 r8:ee0e6ae0 r7:00000030 r6:ee0d8000 r5:00000012 | |
| r4:ee0e6a00 | |
| [<c02835b8>] (usb_add_hcd) from [<c029a4f8>] (dwc2_hcd_init+0x438/0x504) | |
| r10:00000030 r9:ffffffe0 r8:ee0e6a00 r7:00000000 r6:c06ac8f0 r5:c0033f40 | |
| r4:ee0d8410 | |
| [<c029a0c0>] (dwc2_hcd_init) from [<c029eb80>] (dwc2_driver_probe+0x198/0x1cc) | |
| r10:ee12a840 r9:00000030 r8:c0670930 r7:c04a4ae4 r6:ee12cc10 r5:ee0d8410 | |
| r4:ee12cc00 | |
| [<c029e9e8>] (dwc2_driver_probe) from [<c0249f80>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c066e518 r7:00000000 r6:c06597b4 r5:ee12cc10 | |
| r4:ffffffed | |
| [<c0249f30>] (platform_drv_probe) from [<c0248564>] (driver_probe_device+0x140/0x348) | |
| r6:c06b922c r5:c06597b4 r4:ee12cc10 r3:c0249f30 | |
| [<c0248424>] (driver_probe_device) from [<c0248828>] (__driver_attach+0x70/0x94) | |
| r9:c06747c0 r8:c0644da0 r7:c06572e8 r6:c06597b4 r5:ee12cc44 r4:ee12cc10 | |
| [<c02487b8>] (__driver_attach) from [<c0246964>] (bus_for_each_dev+0x74/0x98) | |
| r6:c02487b8 r5:c06597b4 r4:00000000 r3:00000001 | |
| [<c02468f0>] (bus_for_each_dev) from [<c0247f90>] (driver_attach+0x20/0x28) | |
| r6:ee0ecf80 r5:00000000 r4:c06597b4 | |
| [<c0247f70>] (driver_attach) from [<c0247bc8>] (bus_add_driver+0x10c/0x1fc) | |
| [<c0247abc>] (bus_add_driver) from [<c0248ee4>] (driver_register+0xa4/0xe8) | |
| r7:c0644da0 r6:00000000 r5:c0613ed4 r4:c06597b4 | |
| [<c0248e40>] (driver_register) from [<c0249eb4>] (__platform_driver_register+0x50/0x64) | |
| r5:c0613ed4 r4:ee0ebe00 | |
| [<c0249e64>] (__platform_driver_register) from [<c0613eec>] (dwc2_platform_driver_init+0x18/0x20) | |
| [<c0613ed4>] (dwc2_platform_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| [<c0008930>] (do_one_initcall) from [<c05fbe10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c06747c0 r8:c06747c0 r7:c0636818 r6:c0629a2c r5:000000d3 r4:00000006 | |
| [<c05fbcf4>] (kernel_init_freeable) from [<c0476c68>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0476c58 r4:00000000 | |
| [<c0476c58>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| Code: e12fff38 e30a3006 e1560003 e51bc0a4 (57de7c38) | |
| ---[ end trace 9bba394dc6b015f8 ]--- | |
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b | |
| CPU3: stopping | |
| CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.18.0-rc5-next-20141121 #11 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000003 r4:00000000 r3:00200040 | |
| [<c0011fb4>] (show_stack) from [<c0478998>] (dump_stack+0x78/0x94) | |
| [<c0478920>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c0674a98 r3:c0649390 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:ee081f68 r5:c0643194 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xee081f68 to 0xee081fb0) | |
| 1f60: ffffffed 00000000 ffffffed c001daa0 ee080000 00000000 | |
| 1f80: 00000000 ee081fc0 c0637b08 413fc090 00000000 ee081fbc ee081fc0 ee081fb0 | |
| 1fa0: c000f5b0 c000f5b4 60000113 ffffffff | |
| r6:ffffffff r5:60000113 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0013cbc>] (secondary_start_kernel+0x114/0x134) | |
| r7:c0674ac4 | |
| [<c0013ba8>] (secondary_start_kernel) from [<60008704>] (0x60008704) | |
| r4:8e06406a r3:c00086ec | |
| CPU0: stopping | |
| CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.18.0-rc5-next-20141121 #11 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000000 r4:00000000 r3:00200000 | |
| [<c0011fb4>] (show_stack) from [<c0478998>] (dump_stack+0x78/0x94) | |
| [<c0478920>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c0674a98 r3:c0649390 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:c063bf30 r5:c0643194 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xc063bf30 to 0xc063bf78) | |
| bf20: ffffffed 00000000 ffffffed c001daa0 | |
| bf40: c063a000 00000000 00000000 c063bf88 c0637b08 ef7fcbc0 00000000 c063bf84 | |
| bf60: c063bf88 c063bf78 c000f5b0 c000f5b4 600f0013 ffffffff | |
| r6:ffffffff r5:600f0013 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0476c40>] (rest_init+0x68/0x80) | |
| r7:c0642400 | |
| [<c0476bd8>] (rest_init) from [<c05fbc88>] (start_kernel+0x338/0x3a4) | |
| [<c05fb950>] (start_kernel) from [<60008074>] (0x60008074) | |
| r9:413fc090 r8:6000406a r7:c0646034 r6:c0629c24 r5:c0642480 r4:c0674a54 | |
| CPU2: stopping | |
| CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.18.0-rc5-next-20141121 #11 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000002 r4:00000000 r3:00200040 | |
| [<c0011fb4>] (show_stack) from [<c0478998>] (dump_stack+0x78/0x94) | |
| [<c0478920>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c0674a98 r3:c0649390 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:ee07ff68 r5:c0643194 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xee07ff68 to 0xee07ffb0) | |
| ff60: ffffffed 00000000 ffffffed c001daa0 ee07e000 00000000 | |
| ff80: 00000000 ee07ffc0 c0637b08 413fc090 00000000 ee07ffbc ee07ffc0 ee07ffb0 | |
| ffa0: c000f5b0 c000f5b4 60000113 ffffffff | |
| r6:ffffffff r5:60000113 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0013cbc>] (secondary_start_kernel+0x114/0x134) | |
| r7:c0674ac4 | |
| [<c0013ba8>] (secondary_start_kernel) from [<60008704>] (0x60008704) | |
| r4:8e06406a r3:c00086ec | |
| ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b | |
| DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 282986 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287845 | |
| 1518794 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] n | |
| sh: can't access tty; job control turned off | |
| / # net-kexec | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| No lease, failing | |
| Unable to establish a DHCP session with eth0 | |
| / # net-kexec | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| random: nonblocking pool is initialized | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc5-next-20141121 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #12 SMP Tue Nov 25 06:49:12 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=/dev/sda1 init=/init rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072784K/2097152K available (4575K kernel code, 233K rwdata, 1512K rodata, 248K init, 322K bss, 24368K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc05f9f54 (6088 kB) | |
| .init : 0xc05fa000 - 0xc0638000 ( 248 kB) | |
| .data : 0xc0638000 - 0xc06727b8 ( 234 kB) | |
| .bss : 0xc06727b8 - 0xc06c2ff0 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| rockchip_smp_prepare_cpus: ncores 4 | |
| Setting up static identity map for 0x6047d4b8 - 0x6047d510 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: Mode Mismatch Interrupt: currently in Device mode | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.usb | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.usb: DWC OTG Controller | |
| dwc2 101c0000.usb: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.usb: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.usb | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| usbcore: registered new interface driver usb-storage | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| rtc (null): read_time: fail to read | |
| rtc-hym8563 1-0051: rtc core: registered hym8563 as rtc0 | |
| rk3x-i2c 2002f000.i2c: Initialized RK3xxx I2C bus at f0098000 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Driver 'mmcblk' needs updating - please use bus_type methods | |
| Synopsys Designware Multimedia Card Interface Driver | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| Key type dns_resolver registered | |
| Registering SWP/SWPB emulation handler | |
| sdmmc-supply: supplied by VCC_IO | |
| rockchip_emac 10204000.ethernet: ARC EMAC detected with id: 0x7fd02 | |
| rockchip_emac 10204000.ethernet: IRQ is 51 | |
| rockchip_emac 10204000.ethernet: MAC address is now ce:dc:e6:46:5c:0f | |
| libphy: Synopsys MII Bus: probed | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| rockchip_emac 10204000.ethernet: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| rtc rtc0: read_time: fail to read | |
| rtc-hym8563 1-0051: hctosys: unable to read the hardware clock | |
| sdmmc-supply: disabling | |
| Waiting for root device /dev/sda1... | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0724 | |
| usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.1: Product: 802.11n WLAN Adapter | |
| usb 2-1.1: Manufacturer: Realtek | |
| usb 2-1.1: SerialNumber: 00e04c000001 | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: New USB device found, idVendor=13fe, idProduct=5200 | |
| usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.3: Product: USB DISK 3.0 | |
| usb 2-1.3: Manufacturer: | |
| usb 2-1.3: SerialNumber: 0702372B957B0650 | |
| usb-storage 2-1.3:1.0: USB Mass Storage device detected | |
| scsi host0: usb-storage 2-1.3:1.0 | |
| random: nonblocking pool is initialized | |
| scsi 0:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 | |
| sd 0:0:0:0: [sda] 60566016 512-byte logical blocks: (31.0 GB/28.8 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
| sda: sda1 | |
| sd 0:0:0:0: [sda] Attached SCSI removable disk | |
| EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities | |
| EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities | |
| EXT4-fs (sda1): recovery complete | |
| EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) | |
| VFS: Mounted root (ext4 filesystem) on device 8:1. | |
| devtmpfs: mounted | |
| Freeing unused kernel memory: 248K (c05fa000 - c0638000) | |
| mount: none is already mounted or /dev busy | |
| none is already mounted on /proc | |
| none is already mounted on /sys | |
| sh: can't access tty; job control turned off | |
| / # ls | |
| bin etc lib mnt sbin usr | |
| boot home lost+found proc sys var | |
| dev init media run tmp | |
| / # ls dev/ | |
| autofs tty12 tty35 tty58 | |
| bsg tty13 tty36 tty59 | |
| bus tty14 tty37 tty6 | |
| console tty15 tty38 tty60 | |
| / # ls | |
| bin etc lib mnt sbin usr | |
| boot home lost+found proc sys var | |
| dev init media run tmp | |
| / # /sbin/init | |
| usb 2-1.3: USB disconnect, device number 4 | |
| sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00 | |
| EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 13 (offset 0 size 0 starting block 33794) | |
| Buffer I/O error on device sda1, logical block 33793 | |
| Aborting journal on device sda1-8. | |
| JBD2: Error -5 detected when updating journal superblock for sda1-8. | |
| sd 0:0:0:0: [sda] CDB: | |
| cdb[0]=0x28: 28 00 02 44 0d aa 00 00 f0 00 | |
| blk_update_request: I/O error, dev sda, sector 38014378 | |
| sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00 | |
| Bus errorsd 0:0:0:0: [sda] CDB: | |
| cdb[0]=0x28EXT4-fs error (device sda1): ext4_find_entry:1289: inode #2: comm sh: reading directory lblock 0 | |
| : | |
| / # 28 00 02 44 0e 9a 00 00 10 00 | |
| blk_update_request: I/O error, dev sda, sector 38014618 | |
| usb 2-1.3: new high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: New USB device found, idVendor=13fe, idProduct=5200 | |
| usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| usb 2-1.3: Product: 2303 Boot ROM | |
| usb 2-1.3: Manufacturer: Phison | |
| usb-storage 2-1.3:1.0: USB Mass Storage device detected | |
| scsi host1: usb-storage 2-1.3:1.0 | |
| scsi 1:0:0:0: Direct-Access 2303 PRAM 1.00 PQ: 0 ANSI: 0 CCS | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| sd 1:0:0:0: [sdb] Attached SCSI removable disk | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| / # | |
| / # | |
| / # ls | |
| EXT4-fs error (device sda1): ext4_find_entry:1289: inode #2: comm sh: reading directory lblock 0 | |
| EXT4-fs error (device sda1): ext4_read_inode_bitmap:185: comm sh: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1041 | |
| EXT4-fs error (device sda1): ext4_journal_check_start:56: Detected aborted journal | |
| EXT4-fs (sda1): Remounting filesystem read-only | |
| EXT4-fs error (device sda1): ext4_find_entry:1289: inode #1175041: comm sh: reading directory lblock 0 | |
| EXT4-fs error (device sda1): ext4_find_entry:1289: inode #261122: comm sh: reading directory lblock 0 | |
| sh: ls: not found | |
| / # ls | |
| sh: ls: not found | |
| / # pwd | |
| / | |
| / # ls | |
| sh: ls: not found | |
| / # ls | |
| sh: ls: not found | |
| / # dmesEXT4-fs error (device sda1): ext4_find_entry:1289: inode #2: comm sh: reading directory lblock 0 | |
| EXT4-fs error (device sda1): ext4_find_entry:1289: inode #261122: comm sh: reading directory lblock 0 | |
| EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 1175041, block 0) | |
| EXT4-fs error (device sda1): ext4_find_entry:1289: inode #1175041: comm sh: reading directory lblock 0 | |
| sh: dmes: not found | |
| / # DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 283033 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287844 | |
| 1511872 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] y | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| random: nonblocking pool is initialized | |
| No lease, failing | |
| Unable to establish a DHCP session with eth0 | |
| sh: can't access tty; job control turned off | |
| / # arc_emac 10204000.emac eth0: Link is Down | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| / # net-kexec | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc5-next-20141121 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #12 SMP Tue Nov 25 06:49:12 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=/dev/sda1 init=/init rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072784K/2097152K available (4575K kernel code, 233K rwdata, 1512K rodata, 248K init, 322K bss, 24368K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc05f9f54 (6088 kB) | |
| .init : 0xc05fa000 - 0xc0638000 ( 248 kB) | |
| .data : 0xc0638000 - 0xc06727b8 ( 234 kB) | |
| .bss : 0xc06727b8 - 0xc06c2ff0 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| rockchip_smp_prepare_cpus: ncores 4 | |
| Setting up static identity map for 0x6047d4b8 - 0x6047d510 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: Mode Mismatch Interrupt: currently in Device mode | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.usb | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.usb: DWC OTG Controller | |
| dwc2 101c0000.usb: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.usb: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.usb | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| usbcore: registered new interface driver usb-storage | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| rtc (null): read_time: fail to read | |
| rtc-hym8563 1-0051: rtc core: registered hym8563 as rtc0 | |
| rk3x-i2c 2002f000.i2c: Initialized RK3xxx I2C bus at f0098000 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Driver 'mmcblk' needs updating - please use bus_type methods | |
| Synopsys Designware Multimedia Card Interface Driver | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| Key type dns_resolver registered | |
| Registering SWP/SWPB emulation handler | |
| sdmmc-supply: supplied by VCC_IO | |
| rockchip_emac 10204000.ethernet: ARC EMAC detected with id: 0x7fd02 | |
| rockchip_emac 10204000.ethernet: IRQ is 51 | |
| rockchip_emac 10204000.ethernet: MAC address is now 7a:02:e9:df:8c:ad | |
| libphy: Synopsys MII Bus: probed | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| rockchip_emac 10204000.ethernet: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| rtc rtc0: read_time: fail to read | |
| rtc-hym8563 1-0051: hctosys: unable to read the hardware clock | |
| sdmmc-supply: disabling | |
| Waiting for root device /dev/sda1... | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0724 | |
| usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.1: Product: 802.11n WLAN Adapter | |
| usb 2-1.1: Manufacturer: Realtek | |
| usb 2-1.1: SerialNumber: 00e04c000001 | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: New USB device found, idVendor=13fe, idProduct=5200 | |
| usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.3: Product: USB DISK 3.0 | |
| usb 2-1.3: Manufacturer: | |
| usb 2-1.3: SerialNumber: 0702372B957B0650 | |
| usb-storage 2-1.3:1.0: USB Mass Storage device detected | |
| scsi host0: usb-storage 2-1.3:1.0 | |
| random: nonblocking pool is initialized | |
| scsi 0:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 | |
| sd 0:0:0:0: [sda] 60566016 512-byte logical blocks: (31.0 GB/28.8 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
| sda: sda1 | |
| sd 0:0:0:0: [sda] Attached SCSI removable disk | |
| EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities | |
| EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities | |
| EXT4-fs (sda1): recovery complete | |
| EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) | |
| VFS: Mounted root (ext4 filesystem) on device 8:1. | |
| devtmpfs: mounted | |
| Freeing unused kernel memory: 248K (c05fa000 - c0638000) | |
| mount: none is already mounted or /dev busy | |
| none is already mounted on /proc | |
| none is already mounted on /sys | |
| sh: can't access tty; job control turned off | |
| / # lsmod | |
| Module Size Used by | |
| / # | |
| DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 282855 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287657 | |
| 1510135 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] y | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| random: nonblocking pool is initialized | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc5-next-20141121 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #13 SMP Tue Nov 25 07:04:26 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=/dev/sda1 rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072784K/2097152K available (4575K kernel code, 233K rwdata, 1512K rodata, 248K init, 322K bss, 24368K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc05f9f54 (6088 kB) | |
| .init : 0xc05fa000 - 0xc0638000 ( 248 kB) | |
| .data : 0xc0638000 - 0xc06727b8 ( 234 kB) | |
| .bss : 0xc06727b8 - 0xc06c2ff0 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| rockchip_smp_prepare_cpus: ncores 4 | |
| Setting up static identity map for 0x6047d4b8 - 0x6047d510 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: Mode Mismatch Interrupt: currently in Device mode | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.usb | |
| hub 1-0:1.0: USB hub found | |
| Internal error: Oops - undefined instruction: 0 [#1] SMP ARM | |
| Modules linked in: | |
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc5-next-20141121 #13 | |
| task: ee05db40 ti: ee05e000 task.ti: ee05e000 | |
| PC is at usb_hcd_submit_urb+0x608/0x8c4 | |
| LR is at usb_hcd_submit_urb+0x5fc/0x8c4 | |
| pc : [<c0284320>] lr : [<c0284314>] psr: 60000113 | |
| sp : ee05f7c0 ip : 00002900 fp : ee05f87c | |
| r10: ee0eb840 r9 : 0000000f r8 : c0297868 | |
| r7 : 0000000f r6 : 0000a006 r5 : ee0e6a00 r4 : ee0ec500 | |
| r3 : 0000a006 r2 : ffffffff r1 : 00000008 r0 : 00000000 | |
| Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel | |
| Control: 10c5387d Table: 6000404a DAC: 00000015 | |
| Process swapper/0 (pid: 1, stack limit = 0xee05e240) | |
| Stack: (0xee05f7c0 to 0xee060000) | |
| f7c0: ee0eb840 0000000f 00000006 ee05f8ec 00000021 00002900 00002900 c06b771c | |
| f7e0: 00000000 ee0eb8c0 00000006 ee05f8ec c057375c ee0e6620 00000072 c0584bba | |
| f800: ee05f8cc ee05f810 c0244c78 c005349c c057375c ee05f8ec ee05f83c ee05f828 | |
| f820: 53425553 45545359 73753d4d 45440062 45434956 73752b3d 2d313a62 2e313a30 | |
| f840: 00000030 ee07641c 60000193 c0637580 c06afd80 00000040 ee0ec500 ee0d8000 | |
| f860: 00000200 00000000 00000010 00000002 ee05f8c4 ee05f880 c02857d0 c0283d24 | |
| f880: ee05f8ac ee05f890 c06b4890 00000004 ee02dcc8 0000107e 00000000 ee0ec500 | |
| f8a0: 00000000 ee05f8dc ee05f91c 00001388 000000a0 00000000 ee05f914 ee05f8c8 | |
| f8c0: c0285ea4 c02853a4 ee0eb880 00000010 ee05f8fc ee05f8e0 c00c1cac 00000000 | |
| f8e0: 00000000 ee05f8e4 ee05f8e4 ee0ec500 ee05f914 ee0eb880 0000000f 80000180 | |
| f900: ee0d8000 00000006 ee05f944 ee05f918 c0286034 c0285e64 ee05f944 ee05f928 | |
| f920: ee0e6400 ee0e6620 ee0d8000 00000003 ee0eb8c0 00002900 ee05f9c4 ee05f948 | |
| f940: c02812f4 c0285f98 00002900 00000000 ee0eb8c0 0000000f 00001388 ee05f968 | |
| f960: c011aae0 ee0e91c0 0000000f ee0e6600 ee0d80cc 60000113 ee0e6600 c04a2f58 | |
| f980: ee05f9ac ee05f990 ee05f9ac ee05f998 c047b598 c0479ddc ee0d8000 ee0e6620 | |
| f9a0: 00000000 ee0d8000 c0656e94 ee0e6600 c04a2f58 00000000 ee05f9f4 ee05f9c8 | |
| f9c0: c0289e70 c0281014 c0289ce4 ee0e6620 c0656e94 c06b722c 00000000 c066c518 | |
| f9e0: 00000000 c06b7208 ee05fa24 ee05f9f8 c0248564 c0289cf0 ee0e6600 c0656e94 | |
| fa00: c0656e94 ee0e6620 c024876c ee0d8068 00000000 c0656f38 ee05fa3c ee05fa28 | |
| fa20: c024879c c0248430 00000000 ee0e6620 ee05fa64 ee05fa40 c0246a38 c0248778 | |
| fa40: ee1a8b70 ee193138 c047b598 ee0e6620 c0656f50 ee0e6654 ee05fa84 ee05fa68 | |
| fa60: c02483ac c02469b8 00000001 ee0e6620 c0656f50 ee0e6620 ee05faa4 ee05fa88 | |
| fa80: c024791c c024834c 00000000 ee0e6620 ee0e6628 00000000 ee05fae4 ee05faa8 | |
| faa0: c0245c18 c02478f8 ee05facc ee05fab8 c047b598 c0479ddc ee0e6a00 ee0d8000 | |
| fac0: ee0e6850 ee0e6600 00000001 ee0e6850 c066d550 00000050 ee05fb54 ee05fae8 | |
| fae0: c02881a0 c0245830 00000001 00000000 00000000 00000000 00001388 ee0e8308 | |
| fb00: ee05fb2c ee0ef128 ee0d8068 ee0ebb04 ee0ebb04 ee0e6850 00000004 ee0e6a00 | |
| fb20: ee0e9188 00000001 c0290efc ee0d8000 00000001 c06b722c 00000000 c066c518 | |
| fb40: 00000000 c06b7208 ee05fb6c ee05fb58 c0291104 c0287b58 ee0d8000 c0657618 | |
| fb60: ee05fb84 ee05fb70 c0289cc0 c02910cc ee0d8068 c0657618 ee05fbb4 ee05fb88 | |
| fb80: c0248564 c0289c7c ee0d7000 c064e394 c0657618 ee0d8068 c024876c ee12cc10 | |
| fba0: 00000000 c0656dfc ee05fbcc ee05fbb8 c024879c c0248430 00000000 ee0d8068 | |
| fbc0: ee05fbf4 ee05fbd0 c0246a38 c0248778 ee1a8b70 ee1930b8 c047b598 ee0d8068 | |
| fbe0: c0656f50 ee0d809c ee05fc14 ee05fbf8 c02483ac c02469b8 00000001 ee0d8068 | |
| fc00: c0656f50 ee0d8068 ee05fc34 ee05fc18 c024791c c024834c 00000000 ee0d8068 | |
| fc20: ee0d8070 00000000 ee05fc74 ee05fc38 c0245c18 c02478f8 39383110 0000303a | |
| fc40: ee05fc74 ee05fc50 c02278a0 ee0d8000 ee0d8068 ee0e9200 00000000 ee0e6ae0 | |
| fc60: ee12cc10 00000001 ee05fcb4 ee05fc78 c027ee4c c0245830 00000001 ee0e6ae0 | |
| fc80: ee05fcb4 ee05fc90 c0287204 ee0e6a00 00000012 ee0d8000 00000030 ee0e6ae0 | |
| fca0: ee12cc10 00000001 ee05fcf4 ee05fcb8 c0283a78 c027eb9c 00000000 00000000 | |
| fcc0: c029a49c ee0d8000 ee05fcf4 ee0d8410 c0033f40 c06aa8f0 00000000 ee0e6a00 | |
| fce0: ffffffe0 00000030 ee05fd34 ee05fcf8 c029a4f8 c02835c4 00000000 c05896c9 | |
| fd00: ee05fd34 ee0d854c c02c34a8 ee12cc00 ee0d8410 ee12cc10 c04a4ae4 c066e930 | |
| fd20: 00000030 ee12a840 ee05fddc ee05fd38 c029eb80 c029a0cc 00000080 ee12a800 | |
| fd40: ee0d8410 ee05fd50 c039a29c c030830c c011acf4 c011aaf8 00000004 ee12b4e8 | |
| fd60: ee05fd84 ee05fd70 c011aae0 ee0e83a8 ee0e8448 ee12b4e8 ee05fda4 ee0e83a8 | |
| fd80: ee0e8448 c057b1df ee12b4e8 00000001 00000000 00000000 ee05fdcc ee05fda8 | |
| fda0: c011cfa4 c0119c70 00000001 ee12cc10 00000000 ffffffed ee12cc10 c06577b4 | |
| fdc0: 00000000 c066c518 00000000 00000000 ee05fdfc ee05fde0 c0249f80 c029e9f4 | |
| fde0: c0249f30 ee12cc10 c06577b4 c06b722c ee05fe2c ee05fe00 c0248564 c0249f3c | |
| fe00: ee05fe2c ee05fe10 ee12cc10 ee12cc44 c06577b4 c06552e8 c0642da0 c06727c0 | |
| fe20: ee05fe4c ee05fe30 c0248828 c0248430 00000001 00000000 c06577b4 c02487b8 | |
| fe40: ee05fe74 ee05fe50 c0246964 c02487c4 ee03795c ee125834 ee037970 c06577b4 | |
| fe60: 00000000 ee0ecf80 ee05fe84 ee05fe78 c0247f90 c02468fc ee05feac ee05fe88 | |
| fe80: c0247bc8 c0247f7c c04a4bac ee05fe98 c06577b4 c0612ed4 00000000 c0642da0 | |
| fea0: ee05fec4 ee05feb0 c0248ee4 c0247ac8 ee0ebe00 c0612ed4 ee05fed4 ee05fec8 | |
| fec0: c0249eb4 c0248e4c ee05fee4 ee05fed8 c0612eec c0249e70 ee05ff5c ee05fee8 | |
| fee0: c0008a4c c0612ee0 ee05ff04 ee0faa00 ee05ff14 ee05ff00 c0038b00 c0038ad8 | |
| ff00: ef7fccb9 00000000 ee05ff5c ee05ff18 c0038e2c c05fa608 00000000 c01d4b6c | |
| ff20: 000000d2 00000006 00000006 000000d3 00000000 00000006 00000006 000000d3 | |
| ff40: c0628a2c c0635818 c06727c0 c06727c0 ee05ff94 ee05ff60 c05fae10 c000893c | |
| ff60: 00000006 00000006 c05fa5fc ee033040 00000000 c0476c58 00000000 00000000 | |
| ff80: 00000000 00000000 ee05ffac ee05ff98 c0476c68 c05fad00 ee05e000 00000000 | |
| ffa0: 00000000 ee05ffb0 c000ea58 c0476c64 00000000 00000000 00000000 00000000 | |
| ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff | |
| Backtrace: | |
| [<c0283d18>] (usb_hcd_submit_urb) from [<c02857d0>] (usb_submit_urb+0x438/0x478) | |
| r10:00000002 r9:00000010 r8:00000000 r7:00000200 r6:ee0d8000 r5:ee0ec500 | |
| r4:00000040 | |
| [<c0285398>] (usb_submit_urb) from [<c0285ea4>] (usb_start_wait_urb+0x4c/0x134) | |
| r10:00000000 r9:000000a0 r8:00001388 r7:ee05f91c r6:ee05f8dc r5:00000000 | |
| r4:ee0ec500 | |
| [<c0285e58>] (usb_start_wait_urb) from [<c0286034>] (usb_control_msg+0xa8/0xd0) | |
| r8:00000006 r7:ee0d8000 r6:80000180 r5:0000000f r4:ee0eb880 | |
| [<c0285f8c>] (usb_control_msg) from [<c02812f4>] (hub_probe+0x2ec/0xc64) | |
| r9:00002900 r8:ee0eb8c0 r7:00000003 r6:ee0d8000 r5:ee0e6620 r4:ee0e6400 | |
| [<c0281008>] (hub_probe) from [<c0289e70>] (usb_probe_interface+0x18c/0x244) | |
| r10:00000000 r9:c04a2f58 r8:ee0e6600 r7:c0656e94 r6:ee0d8000 r5:00000000 | |
| r4:ee0e6620 | |
| [<c0289ce4>] (usb_probe_interface) from [<c0248564>] (driver_probe_device+0x140/0x348) | |
| r10:c06b7208 r9:00000000 r8:c066c518 r7:00000000 r6:c06b722c r5:c0656e94 | |
| r4:ee0e6620 r3:c0289ce4 | |
| [<c0248424>] (driver_probe_device) from [<c024879c>] (__device_attach+0x30/0x4c) | |
| r9:c0656f38 r8:00000000 r7:ee0d8068 r6:c024876c r5:ee0e6620 r4:c0656e94 | |
| [<c024876c>] (__device_attach) from [<c0246a38>] (bus_for_each_drv+0x8c/0x9c) | |
| r5:ee0e6620 r4:00000000 | |
| [<c02469ac>] (bus_for_each_drv) from [<c02483ac>] (device_attach+0x6c/0x90) | |
| r6:ee0e6654 r5:c0656f50 r4:ee0e6620 | |
| [<c0248340>] (device_attach) from [<c024791c>] (bus_probe_device+0x30/0xa0) | |
| r6:ee0e6620 r5:c0656f50 r4:ee0e6620 r3:00000001 | |
| [<c02478ec>] (bus_probe_device) from [<c0245c18>] (device_add+0x3f4/0x510) | |
| r6:00000000 r5:ee0e6628 r4:ee0e6620 r3:00000000 | |
| [<c0245824>] (device_add) from [<c02881a0>] (usb_set_configuration+0x654/0x6ec) | |
| r10:00000050 r9:c066d550 r8:ee0e6850 r7:00000001 r6:ee0e6600 r5:ee0e6850 | |
| r4:ee0d8000 | |
| [<c0287b4c>] (usb_set_configuration) from [<c0291104>] (generic_probe+0x44/0x7c) | |
| r10:c06b7208 r9:00000000 r8:c066c518 r7:00000000 r6:c06b722c r5:00000001 | |
| r4:ee0d8000 | |
| [<c02910c0>] (generic_probe) from [<c0289cc0>] (usb_probe_device+0x50/0x74) | |
| r5:c0657618 r4:ee0d8000 | |
| [<c0289c70>] (usb_probe_device) from [<c0248564>] (driver_probe_device+0x140/0x348) | |
| r5:c0657618 r4:ee0d8068 | |
| [<c0248424>] (driver_probe_device) from [<c024879c>] (__device_attach+0x30/0x4c) | |
| r9:c0656dfc r8:00000000 r7:ee12cc10 r6:c024876c r5:ee0d8068 r4:c0657618 | |
| [<c024876c>] (__device_attach) from [<c0246a38>] (bus_for_each_drv+0x8c/0x9c) | |
| r5:ee0d8068 r4:00000000 | |
| [<c02469ac>] (bus_for_each_drv) from [<c02483ac>] (device_attach+0x6c/0x90) | |
| r6:ee0d809c r5:c0656f50 r4:ee0d8068 | |
| [<c0248340>] (device_attach) from [<c024791c>] (bus_probe_device+0x30/0xa0) | |
| r6:ee0d8068 r5:c0656f50 r4:ee0d8068 r3:00000001 | |
| [<c02478ec>] (bus_probe_device) from [<c0245c18>] (device_add+0x3f4/0x510) | |
| r6:00000000 r5:ee0d8070 r4:ee0d8068 r3:00000000 | |
| [<c0245824>] (device_add) from [<c027ee4c>] (usb_new_device+0x2bc/0x418) | |
| r10:00000001 r9:ee12cc10 r8:ee0e6ae0 r7:00000000 r6:ee0e9200 r5:ee0d8068 | |
| r4:ee0d8000 | |
| [<c027eb90>] (usb_new_device) from [<c0283a78>] (usb_add_hcd+0x4c0/0x760) | |
| r10:00000001 r9:ee12cc10 r8:ee0e6ae0 r7:00000030 r6:ee0d8000 r5:00000012 | |
| r4:ee0e6a00 | |
| [<c02835b8>] (usb_add_hcd) from [<c029a4f8>] (dwc2_hcd_init+0x438/0x504) | |
| r10:00000030 r9:ffffffe0 r8:ee0e6a00 r7:00000000 r6:c06aa8f0 r5:c0033f40 | |
| r4:ee0d8410 | |
| [<c029a0c0>] (dwc2_hcd_init) from [<c029eb80>] (dwc2_driver_probe+0x198/0x1cc) | |
| r10:ee12a840 r9:00000030 r8:c066e930 r7:c04a4ae4 r6:ee12cc10 r5:ee0d8410 | |
| r4:ee12cc00 | |
| [<c029e9e8>] (dwc2_driver_probe) from [<c0249f80>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c066c518 r7:00000000 r6:c06577b4 r5:ee12cc10 | |
| r4:ffffffed | |
| [<c0249f30>] (platform_drv_probe) from [<c0248564>] (driver_probe_device+0x140/0x348) | |
| r6:c06b722c r5:c06577b4 r4:ee12cc10 r3:c0249f30 | |
| [<c0248424>] (driver_probe_device) from [<c0248828>] (__driver_attach+0x70/0x94) | |
| r9:c06727c0 r8:c0642da0 r7:c06552e8 r6:c06577b4 r5:ee12cc44 r4:ee12cc10 | |
| [<c02487b8>] (__driver_attach) from [<c0246964>] (bus_for_each_dev+0x74/0x98) | |
| r6:c02487b8 r5:c06577b4 r4:00000000 r3:00000001 | |
| [<c02468f0>] (bus_for_each_dev) from [<c0247f90>] (driver_attach+0x20/0x28) | |
| r6:ee0ecf80 r5:00000000 r4:c06577b4 | |
| [<c0247f70>] (driver_attach) from [<c0247bc8>] (bus_add_driver+0x10c/0x1fc) | |
| [<c0247abc>] (bus_add_driver) from [<c0248ee4>] (driver_register+0xa4/0xe8) | |
| r7:c0642da0 r6:00000000 r5:c0612ed4 r4:c06577b4 | |
| [<c0248e40>] (driver_register) from [<c0249eb4>] (__platform_driver_register+0x50/0x64) | |
| r5:c0612ed4 r4:ee0ebe00 | |
| [<c0249e64>] (__platform_driver_register) from [<c0612eec>] (dwc2_platform_driver_init+0x18/0x20) | |
| [<c0612ed4>] (dwc2_platform_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| [<c0008930>] (do_one_initcall) from [<c05fae10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c06727c0 r8:c06727c0 r7:c0635818 r6:c0628a2c r5:000000d3 r4:00000006 | |
| [<c05facf4>] (kernel_init_freeable) from [<c0476c68>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0476c58 r4:00000000 | |
| [<c0476c58>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| Code: e12fff38 e30a3006 e1560003 e51bc0a4 (57de7c38) | |
| ---[ end trace 207c4a8454942926 ]--- | |
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b | |
| CPU2: stopping | |
| CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.18.0-rc5-next-20141121 #13 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000002 r4:00000000 r3:00200040 | |
| [<c0011fb4>] (show_stack) from [<c0478998>] (dump_stack+0x78/0x94) | |
| [<c0478920>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c0672a98 r3:c0647390 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:ee07ff68 r5:c0641194 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xee07ff68 to 0xee07ffb0) | |
| ff60: ffffffed 00000000 ffffffed c001daa0 ee07e000 00000000 | |
| ff80: 00000000 ee07ffc0 c0636b08 413fc090 00000000 ee07ffbc ee07ffc0 ee07ffb0 | |
| ffa0: c000f5b0 c000f5b4 60000113 ffffffff | |
| r6:ffffffff r5:60000113 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0013cbc>] (secondary_start_kernel+0x114/0x134) | |
| r7:c0672ac4 | |
| [<c0013ba8>] (secondary_start_kernel) from [<60008704>] (0x60008704) | |
| r4:8e06406a r3:c00086ec | |
| CPU0: stopping | |
| CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.18.0-rc5-next-20141121 #13 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000000 r4:00000000 r3:00200000 | |
| [<c0011fb4>] (show_stack) from [<c0478998>] (dump_stack+0x78/0x94) | |
| [<c0478920>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c0672a98 r3:c0647390 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:c0639f30 r5:c0641194 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xc0639f30 to 0xc0639f78) | |
| 9f20: ffffffed 00000000 ffffffed c001daa0 | |
| 9f40: c0638000 00000000 00000000 c0639f88 c0636b08 ef7fcc40 00000000 c0639f84 | |
| 9f60: c0639f88 c0639f78 c000f5b0 c000f5b4 600f0013 ffffffff | |
| r6:ffffffff r5:600f0013 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0476c40>] (rest_init+0x68/0x80) | |
| r7:c0640400 | |
| [<c0476bd8>] (rest_init) from [<c05fac88>] (start_kernel+0x338/0x3a4) | |
| [<c05fa950>] (start_kernel) from [<60008074>] (0x60008074) | |
| r9:413fc090 r8:6000406a r7:c0644034 r6:c0628c24 r5:c0640480 r4:c0672a54 | |
| CPU3: stopping | |
| CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.18.0-rc5-next-20141121 #13 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000003 r4:00000000 r3:00200040 | |
| [<c0011fb4>] (show_stack) from [<c0478998>] (dump_stack+0x78/0x94) | |
| [<c0478920>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c0672a98 r3:c0647390 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:ee081f68 r5:c0641194 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xee081f68 to 0xee081fb0) | |
| 1f60: ffffffed 00000000 ffffffed c001daa0 ee080000 00000000 | |
| 1f80: 00000000 ee081fc0 c0636b08 413fc090 00000000 ee081fbc ee081fc0 ee081fb0 | |
| 1fa0: c000f5b0 c000f5b4 60000113 ffffffff | |
| r6:ffffffff r5:60000113 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0013cbc>] (secondary_start_kernel+0x114/0x134) | |
| r7:c0672ac4 | |
| [<c0013ba8>] (secondary_start_kernel) from [<60008704>] (0x60008704) | |
| r4:8e06406a r3:c00086ec | |
| ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b | |
| DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 282954 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287844 | |
| 1509827 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] y | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| random: nonblocking pool is initialized | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc5-next-20141121 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #14 SMP Tue Nov 25 07:22:35 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=/dev/sda1 rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072728K/2097152K available (4607K kernel code, 235K rwdata, 1520K rodata, 256K init, 322K bss, 24424K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0603fc4 (6128 kB) | |
| .init : 0xc0604000 - 0xc0644000 ( 256 kB) | |
| .data : 0xc0644000 - 0xc067ef30 ( 236 kB) | |
| .bss : 0xc067ef30 - 0xc06cf870 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| rockchip_smp_prepare_cpus: ncores 4 | |
| Setting up static identity map for 0x60485c28 - 0x60485c80 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| loop: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: Mode Mismatch Interrupt: currently in Device mode | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.usb | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.usb: DWC OTG Controller | |
| dwc2 101c0000.usb: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.usb: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.18.0-rc5-next-20141121 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.usb | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| usbcore: registered new interface driver cdc_acm | |
| cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
| usbcore: registered new interface driver cdc_wdm | |
| usbcore: registered new interface driver usb-storage | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| rtc (null): read_time: fail to read | |
| rtc-hym8563 1-0051: rtc core: registered hym8563 as rtc0 | |
| rk3x-i2c 2002f000.i2c: Initialized RK3xxx I2C bus at f0098000 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Driver 'mmcblk' needs updating - please use bus_type methods | |
| Synopsys Designware Multimedia Card Interface Driver | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 1 at /home/ubuntu/yocto/build/tmp/work/radxa_rock-poky-linux-gnueabi/linux/3.19+git-next-20141121-r1/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x5c/0x78() | |
| sysfs: cannot create duplicate filename '/devices/platform/gpio-leds/leds/(null)' | |
| Modules linked in: | |
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc5-next-20141121 #14 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:c0567f32 r5:00000009 r4:00000000 r3:00200140 | |
| [<c0011fb4>] (show_stack) from [<c048110c>] (dump_stack+0x78/0x94) | |
| [<c0481094>] (dump_stack) from [<c0021b00>] (warn_slowpath_common+0x90/0xbc) | |
| r4:ee05fbd0 r3:c06533b0 | |
| [<c0021a70>] (warn_slowpath_common) from [<c0021b64>] (warn_slowpath_fmt+0x38/0x40) | |
| r8:00000000 r7:ee380a00 r6:ee381f88 r5:ee380780 r4:ee279000 | |
| [<c0021b30>] (warn_slowpath_fmt) from [<c011cc8c>] (sysfs_warn_dup+0x5c/0x78) | |
| r3:ee279fdf r2:c056bfd0 | |
| [<c011cc30>] (sysfs_warn_dup) from [<c011cd24>] (sysfs_create_dir_ns+0x7c/0x8c) | |
| r6:ee381f88 r5:ee30f608 r4:ffffffef | |
| [<c011cca8>] (sysfs_create_dir_ns) from [<c01d11a0>] (kobject_add_internal+0x130/0x310) | |
| r6:ee380a00 r5:ee30f608 r4:ee30f608 | |
| [<c01d1070>] (kobject_add_internal) from [<c01d1548>] (kobject_add+0x78/0x90) | |
| r8:00000000 r7:ee134610 r6:ee380a00Unable to handle kernel NULL pointer dereference at virtual address 0000021e | |
| pgd = c0004000 | |
| [0000021e] *pgd=00000000 | |
| Internal error: Oops: 5 [#1] SMP ARM | |
| Modules linked in: | |
| CPU: 1 PID: 40 Comm: kworker/1:1 Not tainted 3.18.0-rc5-next-20141121 #14 | |
| Workqueue: usb_hub_wq hub_event | |
| task: ee2504c0 ti: ee316000 task.ti: ee316000 | |
| PC is at hub_port_warm_reset_required+0x10/0x70 | |
| LR is at hub_event+0x5c0/0x11ec | |
| pc : [<c027f768>] lr : [<c028434c>] psr: 40000113 | |
| sp : ee317e58 ip : ee317e68 fp : ee317e64 | |
| r10: 00000000 r9 : 00000000 r8 : ee32e200 | |
| r7 : 00000001 r6 : ee32e200 r5 : 00000001 r4 : ee32e544 | |
| r3 : 00000030 r2 : 00000101 r1 : 00000001 r0 : ee330800 | |
| Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel | |
| Control: 10c5387d Table: 6000404a DAC: 00000015 | |
| Process kworker/1:1 (pid: 40, stack limit = 0xee316240) | |
| Stack: (0xee317e58 to 0xee318000) | |
| 7e40: ee317eec ee317e68 | |
| 7e60: c028434c c027f764 ee317e84 ee317e78 c028cdd0 c024f2dc ee317edc ee317e88 | |
| 7e80: c02824a8 11cd1abc ee32e208 ee32e43c ee33089c ee32e39c ee32e600 00000000 | |
| 7ea0: 00000001 ee32e48d 00000000 ee330800 ee32e620 ee32e400 00000101 ee7c9f00 | |
| 7ec0: ee317eec ee0d9680 ee7c4100 ee32e544 00000000 ee7cb300 00000000 00000008 | |
| 7ee0: ee317f2c ee317ef0 c0034ee0 c0283d98 ee317f24 ee7c4100 ee7c4100 ee7c4114 | |
| 7f00: ee0d9698 ee7c4100 ee7c4100 ee7c4114 ee0d9698 00000000 ee0d9680 00000008 | |
| 7f20: ee317f5c ee317f30 c00355c8 c0034d08 00000000 ee25fb80 00000000 ee0d9680 | |
| 7f40: c00352d4 00000000 00000000 00000000 ee317fac ee317f60 c003942c c00352e0 | |
| 7f60: ffffffff 00000000 ffffffff ee0d9680 00000000 00000000 ee317f78 ee317f78 | |
| 7f80: 00000000 00000000 ee317f88 ee317f88 ee25fb80 c003934c 00000000 00000000 | |
| 7fa0: 00000000 ee317fb0 c000ea58 c0039358 00000000 00000000 00000000 00000000 | |
| 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff | |
| Backtrace: | |
| [<c027f758>] (hub_port_warm_reset_required) from [<c028434c>] (hub_event+0x5c0/0x11ec) | |
| [<c0283d8c>] (hub_event) from [<c0034ee0>] (process_one_work+0x1e4/0x310) | |
| r10:00000008 r9:00000000 r8:ee7cb300 r7:00000000 r6:ee32e544 r5:ee7c4100 | |
| r4:ee0d9680 | |
| [<c0034cfc>] (process_one_work) from [<c00355c8>] (worker_thread+0x2f4/0x448) | |
| r10:00000008 r9:ee0d9680 r8:00000000 r7:ee0d9698 r6:ee7c4114 r5:ee7c4100 | |
| r4:ee7c4100 | |
| [<c00352d4>] (worker_thread) from [<c003942c>] (kthread+0xe0/0xf4) | |
| r10:00000000 r9:00000000 r8:00000000 r7:c00352d4 r6:ee0d9680 r5:00000000 | |
| r4:ee25fb80 r3:00000000 | |
| [<c003934c>] (kthread) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r7:00000000 r6:00000000 r5:c003934c r4:ee25fb80 | |
| Code: e1a0c00d e92dd800 e24cb004 e5903004 (e5d331ee) | |
| ---[ end trace 1b52ce3fb73c2c72 ]--- | |
| Unable to handle kernel paging request at virtual address ffffffec | |
| pgd = c0004000 | |
| [ffffffec] *pgd=8f7fd821, *pte=00000000, *ppte=00000000 | |
| Internal error: Oops: 17 [#2] SMP ARM | |
| Modules linked in: | |
| CPU: 1 PID: 40 Comm: kworker/1:1 Tainted: G D 3.18.0-rc5-next-20141121 #14 | |
| task: ee2504c0 ti: ee316000 task.ti: ee316000 | |
| PC is at kthread_data+0x10/0x18 | |
| LR is at wq_worker_sleeping+0x14/0xd4 | |
| pc : [<c0039994>] lr : [<c00357b4>] psr: 20000193 | |
| sp : ee317b28 ip : ee317b38 fp : ee317b34 | |
| r10: 00000001 r9 : ee25073c r8 : 00000001 | |
| r7 : c0642580 r6 : c0642580 r5 : ee7c4580 r4 : 00000001 | |
| r3 : 00000000 r2 : ee7c4580 r1 : 00000001 r0 : ee2504c0 | |
| Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user | |
| Control: 10c5387d Table: 6000404a DAC: 00000015 | |
| Process kworker/1:1 (pid: 40, stack limit = 0xee316240) | |
| Stack: (0xee317b28 to 0xee318000) | |
| 7b20: ee317b4c ee317b38 c00357b4 c0039990 ee2504c0 ee7c4580 | |
| 7b40: ee317bdc ee317b50 c0481e08 c00357ac 00000000 00000000 c0641240 ee260a60 | |
| 7b60: ee317b94 2e182000 c005f264 c005f168 ee2504c0 c0641240 00000000 00000001 | |
| 7b80: 00000000 ee2504c0 ee317ba4 ee317b98 c005f414 c005f1a0 ee317bec ee317ba8 | |
| 7ba0: c0022ce0 c005f408 c008a2ac 00000000 00000000 ee2504c0 00000001 c0646040 | |
| 7bc0: c027f76a 00000001 ee317bf8 ee2506b8 ee317bec ee317be0 c0482288 c0481d14 | |
| 7be0: ee317c14 ee317bf0 c0023558 c04821fc c027f76a 00000000 ee317bf8 ee317bf8 | |
| 7c00: c0021c04 c027f76a ee317c94 ee317c18 c00122bc c0022d14 ee316240 0000000b | |
| 7c20: c027f768 60000113 00000008 00000000 65000000 63306131 20643030 64323965 | |
| 7c40: 30303864 34326520 30306263 35652034 30333039 28203430 33643565 65653133 | |
| 7c60: c0002029 c0480260 c059efb8 0000021e 00000005 ee317e10 00000000 ee2504c0 | |
| 7c80: 00000000 00000005 ee317cac ee317c98 c047fffc c0011fdc ee317e10 00000005 | |
| 7ca0: ee317d44 ee317cb0 c001a710 c047ffac ee0b0000 80000113 ee317cec ee0b0000 | |
| 7cc0: ee317ce4 ee317cd0 c0060e60 c0060dc8 00000000 ffff8c66 ee317d44 ee317ce8 | |
| 7ce0: c0484c18 c0060e30 a0000113 00000000 00200200 ffff8c66 ee0b0000 c0060ae4 | |
| 7d00: ee2504c0 ffffffff ffffffff 00000000 00000000 00000000 00000000 ee317e10 | |
| 7d20: c0650cac 0000021e 00000005 ee32e200 00000000 00000000 ee317d64 ee317d48 | |
| 7d40: c001a820 c001a404 00000005 c0650cac 0000021e ee317e10 ee317e0c ee317d68 | |
| 7d60: c000850c c001a808 c0289338 c00c109c ee34eb80 ee34eb80 ee317d94 ee317d88 | |
| 7d80: c028937c c0289318 ee317de4 ee317d98 c028a0f0 c0289348 ee34f500 00000010 | |
| 7da0: ee317dcc ee317db0 c00c1cac 00000000 00030003 ee317db4 ee317db4 00000000 | |
| 7dc0: ee34eb80 ee34f500 00000004 80000180 ee330800 00000000 ee317e14 ee317de8 | |
| 7de0: c028a1d0 c00c109c ee7cb300 00000004 c027f768 40000113 ffffffff ee317e44 | |
| 7e00: ee317e64 ee317e10 c0012a98 c00084dc ee330800 00000001 00000101 00000030 | |
| 7e20: ee32e544 00000001 ee32e200 00000001 ee32e200 00000000 00000000 ee317e64 | |
| 7e40: ee317e68 ee317e58 c028434c c027f768 40000113 ffffffff ee317eec ee317e68 | |
| 7e60: c028434c c027f764 ee317e84 ee317e78 c028cdd0 c024f2dc ee317edc ee317e88 | |
| 7e80: c02824a8 11cd1abc ee32e208 ee32e43c ee33089c ee32e39c ee32e600 00000000 | |
| 7ea0: 00000001 ee32e48d 00000000 ee330800 ee32e620 ee32e400 00000101 ee7c9f00 | |
| 7ec0: ee317eec ee0d9680 ee7c4100 ee32e544 00000000 ee7cb300 00000000 00000008 | |
| 7ee0: ee317f2c ee317ef0 c0034ee0 c0283d98 ee317f24 ee7c4100 ee7c4100 ee7c4114 | |
| 7f00: ee0d9698 ee7c4100 ee7c4100 ee7c4114 ee0d9698 00000000 ee0d9680 00000008 | |
| 7f20: ee317f5c ee317f30 c00355c8 c0034d08 00000000 ee25fb80 00000000 ee0d9680 | |
| 7f40: c00352d4 00000000 00000000 00000000 ee317fac ee317f60 c003942c c00352e0 | |
| 7f60: ffffffff 00000000 ffffffff ee0d9680 00000000 00000000 ee317f78 ee317f78 | |
| 7f80: 00000001 00010001 ee317f88 ee317f88 ee25fb80 c003934c 00000000 00000000 | |
| 7fa0: 00000000 ee317fb0 c000ea58 c0039358 00000000 00000000 00000000 00000000 | |
| 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff | |
| Backtrace: | |
| [<c0039984>] (kthread_data) from [<c00357b4>] (wq_worker_sleeping+0x14/0xd4) | |
| [<c00357a0>] (wq_worker_sleeping) from [<c0481e08>] (__schedule+0x100/0x4e8) | |
| r5:ee7c4580 r4:ee2504c0 | |
| [<c0481d08>] (__schedule) from [<c0482288>] (schedule+0x98/0x9c) | |
| r10:ee2506b8 r9:ee317bf8 r8:00000001 r7:c027f76a r6:c0646040 r5:00000001 | |
| r4:ee2504c0 | |
| [<c04821f0>] (schedule) from [<c0023558>] (do_exit+0x850/0x894) | |
| [<c0022d08>] (do_exit) from [<c00122bc>] (die+0x2ec/0x3ec) | |
| r7:c027f76a | |
| [<c0011fd0>] (die) from [<c047fffc>] (__do_kernel_fault.part.11+0x5c/0x7c) | |
| r10:00000005 r9:00000000 r8:ee2504c0 r7:00000000 r6:ee317e10 r5:00000005 | |
| r4:0000021e | |
| [<c047ffa0>] (__do_kernel_fault.part.11) from [<c001a710>] (do_page_fault+0x318/0x364) | |
| r7:00000005 r3:ee317e10 | |
| [<c001a3f8>] (do_page_fault) from [<c001a820>] (do_translation_fault+0x24/0xb4) | |
| r10:00000000 r9:00000000 r8:ee32e200 r7:00000005 r6:0000021e r5:c0650cac | |
| r4:ee317e10 | |
| [<c001a7fc>] (do_translation_fault) from [<c000850c>] (do_DataAbort+0x3c/0xa0) | |
| r7:ee317e10 r6:0000021e r5:c0650cac r4:00000005 | |
| [<c00084d0>] (do_DataAbort) from [<c0012a98>] (__dabt_svc+0x38/0x60) | |
| Exception stack(0xee317e10 to 0xee317e58) | |
| 7e00: ee330800 00000001 00000101 00000030 | |
| 7e20: ee32e544 00000001 ee32e200 00000001 ee32e200 00000000 00000000 ee317e64 | |
| 7e40: ee317e68 ee317e58 c028434c c027f768 40000113 ffffffff | |
| r7:ee317e44 r6:ffffffff r5:40000113 r4:c027f768 | |
| [<c027f758>] (hub_port_warm_reset_required) from [<c028434c>] (hub_event+0x5c0/0x11ec) | |
| [<c0283d8c>] (hub_event) from [<c0034ee0>] (process_one_work+0x1e4/0x310) | |
| r10:00000008 r9:00000000 r8:ee7cb300 r7:00000000 r6:ee32e544 r5:ee7c4100 | |
| r4:ee0d9680 | |
| [<c0034cfc>] (process_one_work) from [<c00355c8>] (worker_thread+0x2f4/0x448) | |
| r10:00000008 r9:ee0d9680 r8:00000000 r7:ee0d9698 r6:ee7c4114 r5:ee7c4100 | |
| r4:ee7c4100 | |
| [<c00352d4>] (worker_thread) from [<c003942c>] (kthread+0xe0/0xf4) | |
| r10:00000000 r9:00000000 r8:00000000 r7:c00352d4 r6:ee0d9680 r5:00000000 | |
| r4:ee25fb80 r3:00000000 | |
| [<c003934c>] (kthread) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r7:00000000 r6:00000000 r5:c003934c r4:ee25fb80 | |
| Code: e1a0c00d e92dd800 e24cb004 e5903250 (e5130014) | |
| ---[ end trace 1b52ce3fb73c2c73 ]--- | |
| Fixing recursive fault but reboot is needed! | |
| r5:ee30f608 r4:00000000 | |
| [<c01d14d4>] (kobject_add) from [<c0244278>] (device_add+0x114/0x510) | |
| r3:00000003 r2:00000000 | |
| r6:00000000 r5:ee30f608 r4:ee30f600 | |
| [<c0244164>] (device_add) from [<c02447d4>] (device_create_groups_vargs+0x84/0xcc) | |
| r10:00000000 r9:ffffffea r8:00000000 r7:ee134610 r6:ee1aa500 r5:00000000 | |
| r4:ee30f600 | |
| [<c0244750>] (device_create_groups_vargs) from [<c02448b0>] (device_create_with_groups+0x30/0x38) | |
| r8:00000000 r7:ee134610 r6:c06c4a68 r5:ee134610 r4:ee37e8fc r3:ee37e8fc | |
| [<c0244880>] (device_create_with_groups) from [<c0300ba0>] (led_classdev_register+0x48/0x164) | |
| [<c0300b58>] (led_classdev_register) from [<c03019d0>] (create_gpio_led+0x154/0x168) | |
| r6:ee05fd9c r5:c06c12d8 r4:ee37e8fc | |
| [<c030187c>] (create_gpio_led) from [<c0301ca4>] (gpio_led_probe+0x228/0x2c0) | |
| r8:00000000 r7:ee134600 r6:ee134610 r5:ee7ee46c r4:ee37e810 r3:00000000 | |
| [<c0301a7c>] (gpio_led_probe) from [<c02488c0>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c0678858 r7:00000000 r6:c0669aa8 r5:ee134610 | |
| r4:ffffffed | |
| [<c0248870>] (platform_drv_probe) from [<c0246ea4>] (driver_probe_device+0x140/0x348) | |
| r6:c06c39ac r5:c0669aa8 r4:ee134610 r3:c0248870 | |
| [<c0246d64>] (driver_probe_device) from [<c0247168>] (__driver_attach+0x70/0x94) | |
| r9:c067ef40 r8:c064eda0 r7:c06612e8 r6:c0669aa8 r5:ee134644 r4:ee134610 | |
| [<c02470f8>] (__driver_attach) from [<c02452a4>] (bus_for_each_dev+0x74/0x98) | |
| r6:c02470f8 r5:c0669aa8 r4:00000000 r3:00000001 | |
| [<c0245230>] (bus_for_each_dev) from [<c02468d0>] (driver_attach+0x20/0x28) | |
| r6:ee312380 r5:00000000 r4:c0669aa8 | |
| [<c02468b0>] (driver_attach) from [<c0246508>] (bus_add_driver+0x10c/0x1fc) | |
| [<c02463fc>] (bus_add_driver) from [<c0247824>] (driver_register+0xa4/0xe8) | |
| r7:c064eda0 r6:00000000 r5:c061e824 r4:c0669aa8 | |
| [<c0247780>] (driver_register) from [<c02487f4>] (__platform_driver_register+0x50/0x64) | |
| r5:c061e824 r4:ee380bc0 | |
| [<c02487a4>] (__platform_driver_register) from [<c061e83c>] (gpio_led_driver_init+0x18/0x20) | |
| [<c061e824>] (gpio_led_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| [<c0008930>] (do_one_initcall) from [<c0604e10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c067ef40 r8:c067ef40 r7:c063fdfc r6:c0632fb4 r5:000000d7 r4:00000006 | |
| [<c0604cf4>] (kernel_init_freeable) from [<c047f3dc>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c047f3cc r4:00000000 | |
| [<c047f3cc>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| ---[ end trace 1b52ce3fb73c2c74 ]--- | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 1 at /home/ubuntu/yocto/build/tmp/work/radxa_rock-poky-linux-gnueabi/linux/3.19+git-next-20141121-r1/linux/lib/kobject.c:240 kobject_add_internal+0x2a4/ | |
| 0x310() | |
| kobject_add_internal failed for (null) with -EEXIST, don't try to register things with the same name in the same directory. | |
| Modules linked in: | |
| CPU: 0 PID: 1 Comm: swapper/0 Tainted: G D W 3.18.0-rc5-next-20141121 #14 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:c057a76f r5:00000009 r4:00000000 r3:00200140 | |
| [<c0011fb4>] (show_stack) from [<c048110c>] (dump_stack+0x78/0x94) | |
| [<c0481094>] (dump_stack) from [<c0021b00>] (warn_slowpath_common+0x90/0xbc) | |
| r4:ee05fc20 r3:c06533b0 | |
| [<c0021a70>] (warn_slowpath_common) from [<c0021b64>] (warn_slowpath_fmt+0x38/0x40) | |
| r8:00000000 r7:ee380a00 r6:ee380a00 r5:ffffffef r4:ee30f608 | |
| [<c0021b30>] (warn_slowpath_fmt) from [<c01d1314>] (kobject_add_internal+0x2a4/0x310) | |
| r3:c049a349 r2:c057ab49 | |
| [<c01d1070>] (kobject_add_internal) from [<c01d1548>] (kobject_add+0x78/0x90) | |
| r8:00000000 r7:ee134610 r6:ee380a00 r5:ee30f608 r4:00000000 | |
| [<c01d14d4>] (kobject_add) from [<c0244278>] (device_add+0x114/0x510) | |
| r3:00000003 r2:00000000 | |
| r6:00000000 r5:ee30f608 r4:ee30f600 | |
| [<c0244164>] (device_add) from [<c02447d4>] (device_create_groups_vargs+0x84/0xcc) | |
| r10:00000000 r9:ffffffea r8:00000000 r7:ee134610 r6:ee1aa500 r5:00000000 | |
| r4:ee30f600 | |
| [<c0244750>] (device_create_groups_vargs) from [<c02448b0>] (device_create_with_groups+0x30/0x38) | |
| r8:00000000 r7:ee134610 r6:c06c4a68 r5:ee134610 r4:ee37e8fc r3:ee37e8fc | |
| [<c0244880>] (device_create_with_groups) from [<c0300ba0>] (led_classdev_register+0x48/0x164) | |
| [<c0300b58>] (led_classdev_register) from [<c03019d0>] (create_gpio_led+0x154/0x168) | |
| r6:ee05fd9c r5:c06c12d8 r4:ee37e8fc | |
| [<c030187c>] (create_gpio_led) from [<c0301ca4>] (gpio_led_probe+0x228/0x2c0) | |
| r8:00000000 r7:ee134600 r6:ee134610 r5:ee7ee46c r4:ee37e810 r3:00000000 | |
| [<c0301a7c>] (gpio_led_probe) from [<c02488c0>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c0678858 r7:00000000 r6:c0669aa8 r5:ee134610 | |
| r4:ffffffed | |
| [<c0248870>] (platform_drv_probe) from [<c0246ea4>] (driver_probe_device+0x140/0x348) | |
| r6:c06c39ac r5:c0669aa8 r4:ee134610 r3:c0248870 | |
| [<c0246d64>] (driver_probe_device) from [<c0247168>] (__driver_attach+0x70/0x94) | |
| r9:c067ef40 r8:c064eda0 r7:c06612e8 r6:c0669aa8 r5:ee134644 r4:ee134610 | |
| [<c02470f8>] (__driver_attach) from [<c02452a4>] (bus_for_each_dev+0x74/0x98) | |
| r6:c02470f8 r5:c0669aa8 r4:00000000 r3:00000001 | |
| [<c0245230>] (bus_for_each_dev) from [<c02468d0>] (driver_attach+0x20/0x28) | |
| r6:ee312380 r5:00000000 r4:c0669aa8 | |
| [<c02468b0>] (driver_attach) from [<c0246508>] (bus_add_driver+0x10c/0x1fc) | |
| [<c02463fc>] (bus_add_driver) from [<c0247824>] (driver_register+0xa4/0xe8) | |
| r7:c064eda0 r6:00000000 r5:c061e824 r4:c0669aa8 | |
| [<c0247780>] (driver_register) from [<c02487f4>] (__platform_driver_register+0x50/0x64) | |
| r5:c061e824 r4:ee380bc0 | |
| [<c02487a4>] (__platform_driver_register) from [<c061e83c>] (gpio_led_driver_init+0x18/0x20) | |
| [<c061e824>] (gpio_led_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| [<c0008930>] (do_one_initcall) from [<c0604e10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c067ef40 r8:c067ef40 r7:c063fdfc r6:c0632fb4 r5:000000d7 r4:00000006 | |
| [<c0604cf4>] (kernel_init_freeable) from [<c047f3dc>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c047f3cc r4:00000000 | |
| [<c047f3cc>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| ---[ end trace 1b52ce3fb73c2c75 ]--- | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| Key type dns_resolver registered | |
| Registering SWP/SWPB emulation handler | |
| INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=2102 jiffies, g=-280, c=-281, q=16) | |
| INFO: Stall ended before state dump start | |
| DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 282904 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287735 | |
| 1510073 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] y | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| random: nonblocking pool is initialized | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc5-next-20141121 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #14 SMP Tue Nov 25 07:22:35 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=/dev/sda1 rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072728K/2097152K available (4607K kernel code, 235K rwdata, 1520K rodata, 256K init, 322K bss, 24424K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0603fc4 (6128 kB) | |
| .init : 0xc0604000 - 0xc0644000 ( 256 kB) | |
| .data : 0xc0644000 - 0xc067ef30 ( 236 kB) | |
| .bss : 0xc067ef30 - 0xc06cf870 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| rockchip_smp_prepare_cpus: ncores 4 | |
| Setting up static identity map for 0x60485c28 - 0x60485c80 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| loop: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: Mode Mismatch Interrupt: currently in Device mode | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| Internal error: Oops - undefined instruction: 0 [#1] SMP ARM | |
| Modules linked in: | |
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc5-next-20141121 #14 | |
| task: ee05db40 ti: ee05e000 task.ti: ee05e000 | |
| PC is at usb_hcd_unlink_urb_from_ep+0x18/0x58 | |
| LR is at usb_hcd_submit_urb+0x710/0x8c4 | |
| pc : [<c0286320>] lr : [<c02885b0>] psr: 60000193 | |
| sp : ee05faa8 ip : ee05fac0 fp : ee05fabc | |
| r10: ee308c40 r9 : 00000012 r8 : 00000000 | |
| r7 : 00000012 r6 : 00000000 r5 : c06c3f00 r4 : ee30ac00 | |
| r3 : 00000001 r2 : 00000001 r1 : ee30ac00 r0 : c06c3f04 | |
| Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel | |
| Control: 10c5387d Table: 6000404a DAC: 00000015 | |
| Process swapper/0 (pid: 1, stack limit = 0xee05e240) | |
| Stack: (0xee05faa8 to 0xee060000) | |
| faa0: ee30ac00 ee303800 ee05fb7c ee05fac0 c02885b0 c0286314 | |
| fac0: 00000400 ee05fad0 c0043164 00002bf8 000000c6 00000100 00000080 c06c3f00 | |
| fae0: 00000000 ee308bc0 00000001 60000113 c0680320 c0680320 00000007 00000006 | |
| fb00: 00000006 0000002c 60000113 00000000 ee05db88 ee7c45b8 000031f2 00000000 | |
| fb20: ee05fb54 ee05fb30 c0044a44 c01d3c18 00000001 ee05db40 c0642580 ee7c45b8 | |
| fb40: c064d018 ee05db40 ee05fb9c ee05fb58 c0045260 00000040 ee30ac00 ee301000 | |
| fb60: 00000200 00000000 00000010 00000002 ee05fbc4 ee05fb80 c0289958 c0287eac | |
| fb80: c00441dc c01d3d84 ee7c4580 ee250e08 ee05fbec ee05fba0 ffffffff ee30ac00 | |
| fba0: 00000000 ee05fbdc ee05fc1c 00001388 00000080 00000000 ee05fc14 ee05fbc8 | |
| fbc0: c028a02c c028952c ee308c00 00000010 ee05fbfc ee05fbe0 c00c1cac 00000000 | |
| fbe0: 00000000 ee05fbe4 ee05fbe4 ee30ac00 ee05fc14 ee308c00 00000012 80000180 | |
| fc00: ee301000 00000006 ee05fc44 ee05fc18 c028a1bc c0289fec 00000006 ee05fc90 | |
| fc20: 00000100 00000012 00000003 ee308bc0 ee301000 00000001 ee05fc8c ee05fc48 | |
| fc40: c028aca8 c028a120 00000100 00000000 ee308bc0 00000012 00001388 ee301000 | |
| fc60: ee05fc8c ee303800 ee308bc0 00000012 ee301000 ee3038e0 ee12cc10 00000001 | |
| fc80: ee05fcb4 ee05fc90 c028b36c c028ac34 00000012 ee05fca0 ee303800 00000000 | |
| fca0: ee301000 00000030 ee05fcf4 ee05fcb8 c0287b50 c028b320 00000000 00000000 | |
| fcc0: c029e624 ee301000 ee05fcf4 ee301410 c0033f40 c06b7070 00000000 ee303800 | |
| fce0: ffffffe0 00000030 ee05fd34 ee05fcf8 c029e680 c028774c 00000000 c0592439 | |
| fd00: ee05fd34 ee30154c c02cbc1c ee12cc00 ee301410 ee12cc10 c04aca24 c067ac70 | |
| fd20: 00000030 ee12a740 ee05fddc ee05fd38 c02a2d08 c029e254 00000080 ee12a700 | |
| fd40: ee301410 ee05fd50 c03a2a10 c0310a80 c011acf4 c011aaf8 00000004 ee12b5d8 | |
| fd60: ee05fd84 ee05fd70 c011aae0 ee307b78 ee307c18 ee12b5d8 ee05fda4 ee307b78 | |
| fd80: ee307c18 c0583b3f ee12b5d8 00000001 00000000 00000000 ee05fdcc ee05fda8 | |
| fda0: c011cfa4 c0119c70 00000001 ee12cc10 00000000 ffffffed ee12cc10 c06639a4 | |
| fdc0: 00000000 c0678858 00000000 00000000 ee05fdfc ee05fde0 c02488c0 c02a2b7c | |
| fde0: c0248870 ee12cc10 c06639a4 c06c39ac ee05fe2c ee05fe00 c0246ea4 c024887c | |
| fe00: ee05fe2c ee05fe10 ee12cc10 ee12cc44 c06639a4 c06612e8 c064eda0 c067ef40 | |
| fe20: ee05fe4c ee05fe30 c0247168 c0246d70 00000001 00000000 c06639a4 c02470f8 | |
| fe40: ee05fe74 ee05fe50 c02452a4 c0247104 ee03795c ee126834 ee037970 c06639a4 | |
| fe60: 00000000 ee2f5580 ee05fe84 ee05fe78 c02468d0 c024523c ee05feac ee05fe88 | |
| fe80: c0246508 c02468bc c04acaec ee05fe98 c06639a4 c061d0e4 00000000 c064eda0 | |
| fea0: ee05fec4 ee05feb0 c0247824 c0246408 ee308940 c061d0e4 ee05fed4 ee05fec8 | |
| fec0: c02487f4 c024778c ee05fee4 ee05fed8 c061d0fc c02487b0 ee05ff5c ee05fee8 | |
| fee0: c0008a4c c061d0f0 20070013 ffffffff ee05ff14 ee05ff00 c0038b00 c0038ad8 | |
| ff00: ef7fccb9 00000000 ee05ff5c ee05ff18 c0038e2c c0604608 00000000 c01d34ac | |
| ff20: 000000d6 00000006 00000006 000000d7 00000000 00000006 00000006 000000d7 | |
| ff40: c0632fb4 c063fdac c067ef40 c067ef40 ee05ff94 ee05ff60 c0604e10 c000893c | |
| ff60: 00000006 00000006 c06045fc ee033040 00000000 c047f3cc 00000000 00000000 | |
| ff80: 00000000 00000000 ee05ffac ee05ff98 c047f3dc c0604d00 ee05e000 00000000 | |
| ffa0: 00000000 ee05ffb0 c000ea58 c047f3d8 00000000 00000000 00000000 00000000 | |
| ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff | |
| Backtrace: | |
| [<c0286308>] (usb_hcd_unlink_urb_from_ep) from [<c02885b0>] (usb_hcd_submit_urb+0x710/0x8c4) | |
| r5:ee303800 r4:ee30ac00 | |
| [<c0287ea0>] (usb_hcd_submit_urb) from [<c0289958>] (usb_submit_urb+0x438/0x478) | |
| r10:00000002 r9:00000010 r8:00000000 r7:00000200 r6:ee301000 r5:ee30ac00 | |
| r4:00000040 | |
| [<c0289520>] (usb_submit_urb) from [<c028a02c>] (usb_start_wait_urb+0x4c/0x134) | |
| r10:00000000 r9:00000080 r8:00001388 r7:ee05fc1c r6:ee05fbdc r5:00000000 | |
| r4:ee30ac00 | |
| [<c0289fe0>] (usb_start_wait_urb) from [<c028a1bc>] (usb_control_msg+0xa8/0xd0) | |
| r8:00000006 r7:ee301000 r6:80000180 r5:00000012 r4:ee308c00 | |
| [<c028a114>] (usb_control_msg) from [<c028aca8>] (usb_get_descriptor+0x80/0xc4) | |
| r9:00000001 r8:ee301000 r7:ee308bc0 r6:00000003 r5:00000012 r4:00000100 | |
| [<c028ac28>] (usb_get_descriptor) from [<c028b36c>] (usb_get_device_descriptor+0x58/0x88) | |
| r10:00000001 r9:ee12cc10 r8:ee3038e0 r7:ee301000 r6:00000012 r5:ee308bc0 | |
| r4:ee303800 | |
| [<c028b314>] (usb_get_device_descriptor) from [<c0287b50>] (usb_add_hcd+0x410/0x760) | |
| r7:00000030 r6:ee301000 r5:00000000 r4:ee303800 | |
| [<c0287740>] (usb_add_hcd) from [<c029e680>] (dwc2_hcd_init+0x438/0x504) | |
| r10:00000030 r9:ffffffe0 r8:ee303800 r7:00000000 r6:c06b7070 r5:c0033f40 | |
| r4:ee301410 | |
| [<c029e248>] (dwc2_hcd_init) from [<c02a2d08>] (dwc2_driver_probe+0x198/0x1cc) | |
| r10:ee12a740 r9:00000030 r8:c067ac70 r7:c04aca24 r6:ee12cc10 r5:ee301410 | |
| r4:ee12cc00 | |
| [<c02a2b70>] (dwc2_driver_probe) from [<c02488c0>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c0678858 r7:00000000 r6:c06639a4 r5:ee12cc10 | |
| r4:ffffffed | |
| [<c0248870>] (platform_drv_probe) from [<c0246ea4>] (driver_probe_device+0x140/0x348) | |
| r6:c06c39ac r5:c06639a4 r4:ee12cc10 r3:c0248870 | |
| [<c0246d64>] (driver_probe_device) from [<c0247168>] (__driver_attach+0x70/0x94) | |
| r9:c067ef40 r8:c064eda0 r7:c06612e8 r6:c06639a4 r5:ee12cc44 r4:ee12cc10 | |
| [<c02470f8>] (__driver_attach) from [<c02452a4>] (bus_for_each_dev+0x74/0x98) | |
| r6:c02470f8 r5:c06639a4 r4:00000000 r3:00000001 | |
| [<c0245230>] (bus_for_each_dev) from [<c02468d0>] (driver_attach+0x20/0x28) | |
| r6:ee2f5580 r5:00000000 r4:c06639a4 | |
| [<c02468b0>] (driver_attach) from [<c0246508>] (bus_add_driver+0x10c/0x1fc) | |
| [<c02463fc>] (bus_add_driver) from [<c0247824>] (driver_register+0xa4/0xe8) | |
| r7:c064eda0 r6:00000000 r5:c061d0e4 r4:c06639a4 | |
| [<c0247780>] (driver_register) from [<c02487f4>] (__platform_driver_register+0x50/0x64) | |
| r5:c061d0e4 r4:ee308940 | |
| [<c02487a4>] (__platform_driver_register) from [<c061d0fc>] (dwc2_platform_driver_init+0x18/0x20) | |
| [<c061d0e4>] (dwc2_platform_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| [<c0008930>] (do_one_initcall) from [<c0604e10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c067ef40 r8:c067ef40 r7:c063fdac r6:c0632fb4 r5:000000d7 r4:00000006 | |
| [<c0604cf4>] (kernel_init_freeable) from [<c047f3dc>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c047f3cc r4:00000000 | |
| [<c047f3cc>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| Code: e24cb004 e59f5040 e1a04001 e2850004 (57fe7c38) | |
| ---[ end trace d6677273e0628846 ]--- | |
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b | |
| CPU2: stopping | |
| CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.18.0-rc5-next-20141121 #14 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000002 r4:00000000 r3:00200040 | |
| [<c0011fb4>] (show_stack) from [<c048110c>] (dump_stack+0x78/0x94) | |
| [<c0481094>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c067f218 r3:c06533b0 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:ee07ff68 r5:c064d190 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xee07ff68 to 0xee07ffb0) | |
| ff60: ffffffed 00000000 ffffffed c001daa0 ee07e000 00000000 | |
| ff80: 00000000 ee07ffc0 c0641b08 413fc090 00000000 ee07ffbc ee07ffc0 ee07ffb0 | |
| ffa0: c000f5b0 c000f5b4 60000113 ffffffff | |
| r6:ffffffff r5:60000113 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0013cbc>] (secondary_start_kernel+0x114/0x134) | |
| r7:c067f244 | |
| [<c0013ba8>] (secondary_start_kernel) from [<60008704>] (0x60008704) | |
| r4:8e06406a r3:c00086ec | |
| CPU3: stopping | |
| CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.18.0-rc5-next-20141121 #14 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000003 r4:00000000 r3:00200040 | |
| [<c0011fb4>] (show_stack) from [<c048110c>] (dump_stack+0x78/0x94) | |
| [<c0481094>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c067f218 r3:c06533b0 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:ee081f68 r5:c064d190 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xee081f68 to 0xee081fb0) | |
| 1f60: ffffffed 00000000 ffffffed c001daa0 ee080000 00000000 | |
| 1f80: 00000000 ee081fc0 c0641b08 413fc090 00000000 ee081fbc ee081fc0 ee081fb0 | |
| 1fa0: c000f5b0 c000f5b4 60000113 ffffffff | |
| r6:ffffffff r5:60000113 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0013cbc>] (secondary_start_kernel+0x114/0x134) | |
| r7:c067f244 | |
| [<c0013ba8>] (secondary_start_kernel) from [<60008704>] (0x60008704) | |
| r4:8e06406a r3:c00086ec | |
| CPU0: stopping | |
| CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.18.0-rc5-next-20141121 #14 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000000 r4:00000000 r3:00200000 | |
| [<c0011fb4>] (show_stack) from [<c048110c>] (dump_stack+0x78/0x94) | |
| [<c0481094>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c067f218 r3:c06533b0 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:c0645f30 r5:c064d190 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xc0645f30 to 0xc0645f78) | |
| 5f20: ffffffed 00000000 ffffffed c001daa0 | |
| 5f40: c0644000 00000000 00000000 c0645f88 c0641b08 ef7fcc40 00000000 c0645f84 | |
| 5f60: c0645f88 c0645f78 c000f5b0 c000f5b4 60070013 ffffffff | |
| r6:ffffffff r5:60070013 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c047f3b4>] (rest_init+0x68/0x80) | |
| r7:c064c400 | |
| [<c047f34c>] (rest_init) from [<c0604c88>] (start_kernel+0x338/0x3a4) | |
| [<c0604950>] (start_kernel) from [<60008074>] (0x60008074) | |
| r9:413fc090 r8:6000406a r7:c0650034 r6:c06331ac r5:c064c480 r4:c067f1d4 | |
| ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b | |
| DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 282865 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287669 | |
| 1509887 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] y | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| random: nonblocking pool is initialized | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc5-next-20141121 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #14 SMP Tue Nov 25 07:22:35 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=/dev/sda1 rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072728K/2097152K available (4607K kernel code, 235K rwdata, 1520K rodata, 256K init, 322K bss, 24424K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0603fc4 (6128 kB) | |
| .init : 0xc0604000 - 0xc0644000 ( 256 kB) | |
| .data : 0xc0644000 - 0xc067ef30 ( 236 kB) | |
| .bss : 0xc067ef30 - 0xc06cf870 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| rockchip_smp_prepare_cpus: ncores 4 | |
| Setting up static identity map for 0x60485c28 - 0x60485c80 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| loop: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: Mode Mismatch Interrupt: currently in Device mode | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| Internal error: Oops - undefined instruction: 0 [#1] SMP ARM | |
| Modules linked in: | |
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc5-next-20141121 #14 | |
| task: ee05db40 ti: ee05e000 task.ti: ee05e000 | |
| PC is at usb_hcd_unlink_urb_from_ep+0x18/0x58 | |
| LR is at usb_hcd_submit_urb+0x710/0x8c4 | |
| pc : [<c0286320>] lr : [<c02885b0>] psr: 60000193 | |
| sp : ee05faa8 ip : ee05fac0 fp : ee05fabc | |
| r10: ee308c40 r9 : 00000012 r8 : 00000000 | |
| r7 : 00000012 r6 : 00000000 r5 : c06c3f00 r4 : ee30ac00 | |
| r3 : 00000001 r2 : 00000001 r1 : ee30ac00 r0 : c06c3f04 | |
| Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel | |
| Control: 10c5387d Table: 6000404a DAC: 00000015 | |
| Process swapper/0 (pid: 1, stack limit = 0xee05e240) | |
| Stack: (0xee05faa8 to 0xee060000) | |
| faa0: ee30ac00 ee303800 ee05fb7c ee05fac0 c02885b0 c0286314 | |
| fac0: 00000400 ee05fad0 c0043164 00002bf8 000000c6 00000100 00000080 c06c3f00 | |
| fae0: 00000000 ee308bc0 00000001 60000113 c0680320 c0680320 00000007 00000006 | |
| fb00: 00000006 0000002c 60000113 00000000 ee05db88 ee7c45b8 0000337c 00000000 | |
| fb20: ee05fb54 ee05fb30 c0044a44 c01d3c18 00000001 ee05db40 c0642580 ee7c45b8 | |
| fb40: c064d018 ee05db40 ee05fb9c ee05fb58 c0045260 00000040 ee30ac00 ee301000 | |
| fb60: 00000200 00000000 00000010 00000002 ee05fbc4 ee05fb80 c0289958 c0287eac | |
| fb80: c00441dc c01d3d84 ee7c4580 ee250e08 ee05fbec ee05fba0 ffffffff ee30ac00 | |
| fba0: 00000000 ee05fbdc ee05fc1c 00001388 00000080 00000000 ee05fc14 ee05fbc8 | |
| fbc0: c028a02c c028952c ee308c00 00000010 ee05fbfc ee05fbe0 c00c1cac 00000000 | |
| fbe0: 00000000 ee05fbe4 ee05fbe4 ee30ac00 ee05fc14 ee308c00 00000012 80000180 | |
| fc00: ee301000 00000006 ee05fc44 ee05fc18 c028a1bc c0289fec 00000006 ee05fc90 | |
| fc20: 00000100 00000012 00000003 ee308bc0 ee301000 00000001 ee05fc8c ee05fc48 | |
| fc40: c028aca8 c028a120 00000100 00000000 ee308bc0 00000012 00001388 ee301000 | |
| fc60: ee05fc8c ee303800 ee308bc0 00000012 ee301000 ee3038e0 ee12cc10 00000001 | |
| fc80: ee05fcb4 ee05fc90 c028b36c c028ac34 00000012 ee05fca0 ee303800 00000000 | |
| fca0: ee301000 00000030 ee05fcf4 ee05fcb8 c0287b50 c028b320 00000000 00000000 | |
| fcc0: c029e624 ee301000 ee05fcf4 ee301410 c0033f40 c06b7070 00000000 ee303800 | |
| fce0: ffffffe0 00000030 ee05fd34 ee05fcf8 c029e680 c028774c 00000000 c0592439 | |
| fd00: ee05fd34 ee30154c c02cbc1c ee12cc00 ee301410 ee12cc10 c04aca24 c067ac70 | |
| fd20: 00000030 ee12a740 ee05fddc ee05fd38 c02a2d08 c029e254 00000080 ee12a700 | |
| fd40: ee301410 ee05fd50 c03a2a10 c0310a80 c011acf4 c011aaf8 00000004 ee12b5d8 | |
| fd60: ee05fd84 ee05fd70 c011aae0 ee307b78 ee307c18 ee12b5d8 ee05fda4 ee307b78 | |
| fd80: ee307c18 c0583b3f ee12b5d8 00000001 00000000 00000000 ee05fdcc ee05fda8 | |
| fda0: c011cfa4 c0119c70 00000001 ee12cc10 00000000 ffffffed ee12cc10 c06639a4 | |
| fdc0: 00000000 c0678858 00000000 00000000 ee05fdfc ee05fde0 c02488c0 c02a2b7c | |
| fde0: c0248870 ee12cc10 c06639a4 c06c39ac ee05fe2c ee05fe00 c0246ea4 c024887c | |
| fe00: ee05fe2c ee05fe10 ee12cc10 ee12cc44 c06639a4 c06612e8 c064eda0 c067ef40 | |
| fe20: ee05fe4c ee05fe30 c0247168 c0246d70 00000001 00000000 c06639a4 c02470f8 | |
| fe40: ee05fe74 ee05fe50 c02452a4 c0247104 ee03795c ee126834 ee037970 c06639a4 | |
| fe60: 00000000 ee2f5580 ee05fe84 ee05fe78 c02468d0 c024523c ee05feac ee05fe88 | |
| fe80: c0246508 c02468bc c04acaec ee05fe98 c06639a4 c061d0e4 00000000 c064eda0 | |
| fea0: ee05fec4 ee05feb0 c0247824 c0246408 ee308940 c061d0e4 ee05fed4 ee05fec8 | |
| fec0: c02487f4 c024778c ee05fee4 ee05fed8 c061d0fc c02487b0 ee05ff5c ee05fee8 | |
| fee0: c0008a4c c061d0f0 20070013 ffffffff ee05ff14 ee05ff00 c0038b00 c0038ad8 | |
| ff00: ef7fccb9 00000000 ee05ff5c ee05ff18 c0038e2c c0604608 00000000 c01d34ac | |
| ff20: 000000d6 00000006 00000006 000000d7 00000000 00000006 00000006 000000d7 | |
| ff40: c0632fb4 c063fdac c067ef40 c067ef40 ee05ff94 ee05ff60 c0604e10 c000893c | |
| ff60: 00000006 00000006 c06045fc ee033040 00000000 c047f3cc 00000000 00000000 | |
| ff80: 00000000 00000000 ee05ffac ee05ff98 c047f3dc c0604d00 ee05e000 00000000 | |
| ffa0: 00000000 ee05ffb0 c000ea58 c047f3d8 00000000 00000000 00000000 00000000 | |
| ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 | |
| ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff | |
| Backtrace: | |
| [<c0286308>] (usb_hcd_unlink_urb_from_ep) from [<c02885b0>] (usb_hcd_submit_urb+0x710/0x8c4) | |
| r5:ee303800 r4:ee30ac00 | |
| [<c0287ea0>] (usb_hcd_submit_urb) from [<c0289958>] (usb_submit_urb+0x438/0x478) | |
| r10:00000002 r9:00000010 r8:00000000 r7:00000200 r6:ee301000 r5:ee30ac00 | |
| r4:00000040 | |
| [<c0289520>] (usb_submit_urb) from [<c028a02c>] (usb_start_wait_urb+0x4c/0x134) | |
| r10:00000000 r9:00000080 r8:00001388 r7:ee05fc1c r6:ee05fbdc r5:00000000 | |
| r4:ee30ac00 | |
| [<c0289fe0>] (usb_start_wait_urb) from [<c028a1bc>] (usb_control_msg+0xa8/0xd0) | |
| r8:00000006 r7:ee301000 r6:80000180 r5:00000012 r4:ee308c00 | |
| [<c028a114>] (usb_control_msg) from [<c028aca8>] (usb_get_descriptor+0x80/0xc4) | |
| r9:00000001 r8:ee301000 r7:ee308bc0 r6:00000003 r5:00000012 r4:00000100 | |
| [<c028ac28>] (usb_get_descriptor) from [<c028b36c>] (usb_get_device_descriptor+0x58/0x88) | |
| r10:00000001 r9:ee12cc10 r8:ee3038e0 r7:ee301000 r6:00000012 r5:ee308bc0 | |
| r4:ee303800 | |
| [<c028b314>] (usb_get_device_descriptor) from [<c0287b50>] (usb_add_hcd+0x410/0x760) | |
| r7:00000030 r6:ee301000 r5:00000000 r4:ee303800 | |
| [<c0287740>] (usb_add_hcd) from [<c029e680>] (dwc2_hcd_init+0x438/0x504) | |
| r10:00000030 r9:ffffffe0 r8:ee303800 r7:00000000 r6:c06b7070 r5:c0033f40 | |
| r4:ee301410 | |
| [<c029e248>] (dwc2_hcd_init) from [<c02a2d08>] (dwc2_driver_probe+0x198/0x1cc) | |
| r10:ee12a740 r9:00000030 r8:c067ac70 r7:c04aca24 r6:ee12cc10 r5:ee301410 | |
| r4:ee12cc00 | |
| [<c02a2b70>] (dwc2_driver_probe) from [<c02488c0>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c0678858 r7:00000000 r6:c06639a4 r5:ee12cc10 | |
| r4:ffffffed | |
| [<c0248870>] (platform_drv_probe) from [<c0246ea4>] (driver_probe_device+0x140/0x348) | |
| r6:c06c39ac r5:c06639a4 r4:ee12cc10 r3:c0248870 | |
| [<c0246d64>] (driver_probe_device) from [<c0247168>] (__driver_attach+0x70/0x94) | |
| r9:c067ef40 r8:c064eda0 r7:c06612e8 r6:c06639a4 r5:ee12cc44 r4:ee12cc10 | |
| [<c02470f8>] (__driver_attach) from [<c02452a4>] (bus_for_each_dev+0x74/0x98) | |
| r6:c02470f8 r5:c06639a4 r4:00000000 r3:00000001 | |
| [<c0245230>] (bus_for_each_dev) from [<c02468d0>] (driver_attach+0x20/0x28) | |
| r6:ee2f5580 r5:00000000 r4:c06639a4 | |
| [<c02468b0>] (driver_attach) from [<c0246508>] (bus_add_driver+0x10c/0x1fc) | |
| [<c02463fc>] (bus_add_driver) from [<c0247824>] (driver_register+0xa4/0xe8) | |
| r7:c064eda0 r6:00000000 r5:c061d0e4 r4:c06639a4 | |
| [<c0247780>] (driver_register) from [<c02487f4>] (__platform_driver_register+0x50/0x64) | |
| r5:c061d0e4 r4:ee308940 | |
| [<c02487a4>] (__platform_driver_register) from [<c061d0fc>] (dwc2_platform_driver_init+0x18/0x20) | |
| [<c061d0e4>] (dwc2_platform_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| [<c0008930>] (do_one_initcall) from [<c0604e10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c067ef40 r8:c067ef40 r7:c063fdac r6:c0632fb4 r5:000000d7 r4:00000006 | |
| [<c0604cf4>] (kernel_init_freeable) from [<c047f3dc>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c047f3cc r4:00000000 | |
| [<c047f3cc>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| Code: e24cb004 e59f5040 e1a04001 e2850004 (57fc7c38) | |
| ---[ end trace 58c4c78c95b82b84 ]--- | |
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b | |
| CPU3: stopping | |
| CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.18.0-rc5-next-20141121 #14 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:ee081f68 r5:00000003 r4:00000000 r3:00200040 | |
| [<c0011fb4>] (show_stack) from [<c048110c>] (dump_stack+0x78/0x94) | |
| [<c0481094>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c067f218 r3:c06533b0 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:ee081d70 r5:c064d190 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xee081d70 to 0xee081db8) | |
| 1d60: ee081de4 00000000 00000004 00000000 | |
| 1d80: c06412f8 ee08c400 2e194000 ee7d6580 00000000 00000000 00000003 ee081e54 | |
| 1da0: ee081e04 ee081db8 00000000 c01cddb8 20000113 ffffffff | |
| r6:ffffffff r5:20000113 r4:c01cddb8 r3:00000000 | |
| [<c00472bc>] (load_balance) from [<c0047b54>] (run_rebalance_domains+0x188/0x284) | |
| r10:00000003 r9:00000000 r8:00000000 r7:c0646100 r6:ee7d6580 r5:ffffa332 | |
| r4:ee08c400 | |
| [<c00479cc>] (run_rebalance_domains) from [<c0024b8c>] (__do_softirq+0xe4/0x214) | |
| r10:ee081eb0 r9:c064609c r8:0000000a r7:00000100 r6:000000a0 r5:40000005 | |
| r4:ee080000 | |
| [<c0024aa8>] (__do_softirq) from [<c0024f34>] (irq_exit+0x8c/0xb0) | |
| r10:00000000 r9:413fc090 r8:00000001 r7:ee007400 r6:c06419bc r5:00000000 | |
| r4:00000000 | |
| [<c0024ea8>] (irq_exit) from [<c0054de8>] (__handle_domain_irq+0x88/0xa8) | |
| r4:00000000 r3:000000a0 | |
| [<c0054d60>] (__handle_domain_irq) from [<c0008650>] (gic_handle_irq+0x40/0x64) | |
| r8:c0641b08 r7:ee081f9c r6:ee081f68 r5:c064d190 r4:f0002100 r3:ee081f68 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xee081f68 to 0xee081fb0) | |
| 1f60: ffffffed 00000000 ffffffed c001daa0 ee080000 00000000 | |
| 1f80: 00000000 ee081fc0 c0641b08 413fc090 00000000 ee081fbc ee081fc0 ee081fb0 | |
| 1fa0: c000f5b0 c000f5b4 60000113 ffffffff | |
| r6:ffffffff r5:60000113 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0013cbc>] (secondary_start_kernel+0x114/0x134) | |
| r7:c067f244 | |
| [<c0013ba8>] (secondary_start_kernel) from [<60008704>] (0x60008704) | |
| r4:8e06406a r3:c00086ec | |
| CPU0: stopping | |
| CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.18.0-rc5-next-20141121 #14 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000000 r4:00000000 r3:00200000 | |
| [<c0011fb4>] (show_stack) from [<c048110c>] (dump_stack+0x78/0x94) | |
| [<c0481094>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c067f218 r3:c06533b0 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:c0645f30 r5:c064d190 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xc0645f30 to 0xc0645f78) | |
| 5f20: ffffffed 00000000 ffffffed c001daa0 | |
| 5f40: c0644000 00000000 00000000 c0645f88 c0641b08 ef7fcc40 00000000 c0645f84 | |
| 5f60: c0645f88 c0645f78 c000f5b0 c000f5b4 60070013 ffffffff | |
| r6:ffffffff r5:60070013 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c047f3b4>] (rest_init+0x68/0x80) | |
| r7:c064c400 | |
| [<c047f34c>] (rest_init) from [<c0604c88>] (start_kernel+0x338/0x3a4) | |
| [<c0604950>] (start_kernel) from [<60008074>] (0x60008074) | |
| r9:413fc090 r8:6000406a r7:c0650034 r6:c06331ac r5:c064c480 r4:c067f1d4 | |
| CPU2: stopping | |
| CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.18.0-rc5-next-20141121 #14 | |
| Backtrace: | |
| [<c0011d04>] (dump_backtrace) from [<c0011fcc>] (show_stack+0x18/0x1c) | |
| r6:00000000 r5:00000002 r4:00000000 r3:00200040 | |
| [<c0011fb4>] (show_stack) from [<c048110c>] (dump_stack+0x78/0x94) | |
| [<c0481094>] (dump_stack) from [<c0013fbc>] (handle_IPI+0xd0/0x168) | |
| r4:c067f218 r3:c06533b0 | |
| [<c0013eec>] (handle_IPI) from [<c000866c>] (gic_handle_irq+0x5c/0x64) | |
| r6:ee07ff68 r5:c064d190 r4:f0002100 r3:00000405 | |
| [<c0008610>] (gic_handle_irq) from [<c0012b00>] (__irq_svc+0x40/0x54) | |
| Exception stack(0xee07ff68 to 0xee07ffb0) | |
| ff60: ffffffed 00000000 ffffffed c001daa0 ee07e000 00000000 | |
| ff80: 00000000 ee07ffc0 c0641b08 413fc090 00000000 ee07ffbc ee07ffc0 ee07ffb0 | |
| ffa0: c000f5b0 c000f5b4 60000113 ffffffff | |
| r6:ffffffff r5:60000113 r4:c000f5b4 r3:c000f5b0 | |
| [<c000f580>] (arch_cpu_idle) from [<c004cdbc>] (cpu_startup_entry+0xc0/0x208) | |
| [<c004ccfc>] (cpu_startup_entry) from [<c0013cbc>] (secondary_start_kernel+0x114/0x134) | |
| r7:c067f244 | |
| [<c0013ba8>] (secondary_start_kernel) from [<60008704>] (0x60008704) | |
| r4:8e06406a r3:c00086ec | |
| ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b | |
| DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 282854 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287694 | |
| 1511578 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] y | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| random: nonblocking pool is initialized | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc4-next-20141117 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #2 SMP Tue Nov 25 07:35:34 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=/dev/sda1 init=/init rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072796K/2097152K available (4563K kernel code, 233K rwdata, 1508K rodata, 248K init, 322K bss, 24356K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc05f5f54 (6072 kB) | |
| .init : 0xc05f6000 - 0xc0634000 ( 248 kB) | |
| .data : 0xc0634000 - 0xc066e6e0 ( 234 kB) | |
| .bss : 0xc066e6e0 - 0xc06bef28 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x6047af58 - 0x6047afb0 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.18.0-rc4-next-20141117 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.usb | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.usb: DWC OTG Controller | |
| dwc2 101c0000.usb: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.usb: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.18.0-rc4-next-20141117 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.usb | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| usbcore: registered new interface driver usb-storage | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| rtc (null): read_time: fail to read | |
| rtc-hym8563 1-0051: rtc core: registered hym8563 as rtc0 | |
| act8865: probe of 1-005a failed with error -22 | |
| rk3x-i2c 2002f000.i2c: Initialized RK3xxx I2C bus at f0094000 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Driver 'mmcblk' needs updating - please use bus_type methods | |
| Synopsys Designware Multimedia Card Interface Driver | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 1 at /home/ubuntu/yocto/build/tmp/work/radxa_rock-poky-linux-gnueabi/linux/3.19+git-next-20141117-r1/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x5c/0x78() | |
| sysfs: cannot create duplicate filename '/devices/platform/gpio-leds/leds/(null)' | |
| Modules linked in: | |
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc4-next-20141117 #2 | |
| Backtrace: | |
| [<c0011d18>] (dump_backtrace) from [<c0011fe0>] (show_stack+0x18/0x1c) | |
| r6:c055b11d r5:00000009 r4:00000000 r3:00200140 | |
| [<c0011fc8>] (show_stack) from [<c0476510>] (dump_stack+0x78/0x94) | |
| [<c0476498>] (dump_stack) from [<c002195c>] (warn_slowpath_common+0x90/0xbc) | |
| r4:ee05fbd0 r3:c0643310 | |
| [<c00218cc>] (warn_slowpath_common) from [<c00219c0>] (warn_slowpath_fmt+0x38/0x40) | |
| r8:00000000 r7:ee2e6300 r6:ee2e7268 r5:ee2e6080 r4:ee2db000 | |
| [<c002198c>] (warn_slowpath_fmt) from [<c011c8e0>] (sysfs_warn_dup+0x5c/0x78) | |
| r3:ee2dbfdf r2:c055f1bb | |
| [<c011c884>] (sysfs_warn_dup) from [<c011c978>] (sysfs_create_dir_ns+0x7c/0x8c) | |
| r6:ee2e7268 r5:ee2e2408 r4:ffffffef | |
| [<c011c8fc>] (sysfs_create_dir_ns) from [<c01d0da0>] (kobject_add_internal+0x130/0x310) | |
| r6:ee2e6300 r5:ee2e2408 r4:ee2e2408 | |
| [<c01d0c70>] (kobject_add_internal) from [<c01d1148>] (kobject_add+0x78/0x90) | |
| r8:00000000 r7:ee13bc10 r6:ee2e6300 r5:ee2e2408 r4:00000000 | |
| [<c01d10d4>] (kobject_add) from [<c0243d34>] (device_add+0x114/0x510) | |
| r3:00000003 r2:00000000 | |
| r6:00000000 r5:ee2e2408 r4:ee2e2400 | |
| [<c0243c20>] (device_add) from [<c0244290>] (device_create_groups_vargs+0x84/0xcc) | |
| r10:00000000 r9:ffffffea r8:00000000 r7:ee13bc10 r6:ee1adcc0 r5:00000000 | |
| r4:ee2e2400 | |
| [<c024420c>] (device_create_groups_vargs) from [<c024436c>] (device_create_with_groups+0x30/0x38) | |
| r8:00000000 r7:ee13bc10 r6:c06b413c r5:ee13bc10 r4:ee2e58fc r3:ee2e58fc | |
| [<c024433c>] (device_create_with_groups) from [<c02f6604>] (led_classdev_register+0x48/0x164) | |
| [<c02f65bc>] (led_classdev_register) from [<c02f7434>] (create_gpio_led+0x154/0x168) | |
| r6:ee05fd9c r5:c06b0a98 r4:ee2e58fc | |
| [<c02f72e0>] (create_gpio_led) from [<c02f7708>] (gpio_led_probe+0x228/0x2c0) | |
| r8:00000000 r7:ee13bc00 r6:ee13bc10 r5:ee7ee46c r4:ee2e5810 r3:00000000 | |
| [<c02f74e0>] (gpio_led_probe) from [<c024837c>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c0668458 r7:00000000 r6:c06596d0 r5:ee13bc10 | |
| r4:ffffffed | |
| [<c024832c>] (platform_drv_probe) from [<c0246960>] (driver_probe_device+0x140/0x348) | |
| r6:c06b316c r5:c06596d0 r4:ee13bc10 r3:c024832c | |
| [<c0246820>] (driver_probe_device) from [<c0246c24>] (__driver_attach+0x70/0x94) | |
| r9:c066e700 r8:c063eda0 r7:c0651268 r6:c06596d0 r5:ee13bc44 r4:ee13bc10 | |
| [<c0246bb4>] (__driver_attach) from [<c0244d60>] (bus_for_each_dev+0x74/0x98) | |
| r6:c0246bb4 r5:c06596d0 r4:00000000 r3:00000001 | |
| [<c0244cec>] (bus_for_each_dev) from [<c024638c>] (driver_attach+0x20/0x28) | |
| r6:ee29e000 r5:00000000 r4:c06596d0 | |
| [<c024636c>] (driver_attach) from [<c0245fc4>] (bus_add_driver+0x10c/0x1fc) | |
| [<c0245eb8>] (bus_add_driver) from [<c02472e0>] (driver_register+0xa4/0xe8) | |
| r7:c063eda0 r6:00000000 r5:c06103a0 r4:c06596d0 | |
| [<c024723c>] (driver_register) from [<c02482b0>] (__platform_driver_register+0x50/0x64) | |
| r5:c06103a0 r4:ee2e6500 | |
| [<c0248260>] (__platform_driver_register) from [<c06103b8>] (gpio_led_driver_init+0x18/0x20) | |
| [<c06103a0>] (gpio_led_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| [<c0008930>] (do_one_initcall) from [<c05f6e10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c066e700 r8:c066e700 r7:c0631600 r6:c06247d4 r5:000000d2 r4:00000006 | |
| [<c05f6cf4>] (kernel_init_freeable) from [<c04747e0>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c04747d0 r4:00000000 | |
| [<c04747d0>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| ---[ end trace e8233bbbb6dfc4df ]--- | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 1 at /home/ubuntu/yocto/build/tmp/work/radxa_rock-poky-linux-gnueabi/linux/3.19+git-next-20141117-r1/linux/lib/kobject.c:240 kobject_add_internal+0x2a4/ | |
| 0x310() | |
| kobject_add_internal failed for (null) with -EEXIST, don't try to register things with the same name in the same directory. | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| Modules linked in: | |
| CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.0-rc4-next-20141117 #2 | |
| Backtrace: | |
| [<c0011d18>] (dump_backtrace) from [<c0011fe0>] (show_stack+0x18/0x1c) | |
| r6:c056d95a r5:00000009 r4:00000000 r3:00200140 | |
| [<c0011fc8>] (show_stack) from [<c0476510>] (dump_stack+0x78/0x94) | |
| [<c0476498>] (dump_stack) from [<c002195c>] (warn_slowpath_common+0x90/0xbc) | |
| r4:ee05fc20 r3:c0643310 | |
| [<c00218cc>] (warn_slowpath_common) from [<c00219c0>] (warn_slowpath_fmt+0x38/0x40) | |
| r8:00000000 r7:ee2e6300 r6:ee2e6300 r5:ffffffef r4:ee2e2408 | |
| [<c002198c>] (warn_slowpath_fmt) from [<c01d0f14>] (kobject_add_internal+0x2a4/0x310) | |
| r3:c048f2c9 r2:c056dd34 | |
| [<c01d0c70>] (kobject_add_internal) from [<c01d1148>] (kobject_add+0x78/0x90) | |
| r8:00000000 r7:ee13bc10 r6:ee2e6300 r5:ee2e2408 r4:00000000 | |
| [<c01d10d4>] (kobject_add) from [<c0243d34>] (device_add+0x114/0x510) | |
| r3:00000003 r2:00000000 | |
| r6:00000000 r5:ee2e2408 r4:ee2e2400 | |
| [<c0243c20>] (device_add) from [<c0244290>] (device_create_groups_vargs+0x84/0xcc) | |
| r10:00000000 r9:ffffffea r8:00000000 r7:ee13bc10 r6:ee1adcc0 r5:00000000 | |
| r4:ee2e2400 | |
| [<c024420c>] (device_create_groups_vargs) from [<c024436c>] (device_create_with_groups+0x30/0x38) | |
| r8:00000000 r7:ee13bc10 r6:c06b413c r5:ee13bc10 r4:ee2e58fc r3:ee2e58fc | |
| [<c024433c>] (device_create_with_groups) from [<c02f6604>] (led_classdev_register+0x48/0x164) | |
| [<c02f65bc>] (led_classdev_register) from [<c02f7434>] (create_gpio_led+0x154/0x168) | |
| r6:ee05fd9c r5:c06b0a98 r4:ee2e58fc | |
| [<c02f72e0>] (create_gpio_led) from [<c02f7708>] (gpio_led_probe+0x228/0x2c0) | |
| r8:00000000 r7:ee13bc00 r6:ee13bc10 r5:ee7ee46c r4:ee2e5810 r3:00000000 | |
| [<c02f74e0>] (gpio_led_probe) from [<c024837c>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c0668458 r7:00000000 r6:c06596d0 r5:ee13bc10 | |
| r4:ffffffed | |
| [<c024832c>] (platform_drv_probe) from [<c0246960>] (driver_probe_device+0x140/0x348) | |
| r6:c06b316c r5:c06596d0 r4:ee13bc10 r3:c024832c | |
| [<c0246820>] (driver_probe_device) from [<c0246c24>] (__driver_attach+0x70/0x94) | |
| r9:c066e700 r8:c063eda0 r7:c0651268 r6:c06596d0 r5:ee13bc44 r4:ee13bc10 | |
| [<c0246bb4>] (__driver_attach) from [<c0244d60>] (bus_for_each_dev+0x74/0x98) | |
| r6:c0246bb4 r5:c06596d0 r4:00000000 r3:00000001 | |
| [<c0244cec>] (bus_for_each_dev) from [<c024638c>] (driver_attach+0x20/0x28) | |
| r6:ee29e000 r5:00000000 r4:c06596d0 | |
| [<c024636c>] (driver_attach) from [<c0245fc4>] (bus_add_driver+0x10c/0x1fc) | |
| [<c0245eb8>] (bus_add_driver) from [<c02472e0>] (driver_register+0xa4/0xe8) | |
| r7:c063eda0 r6:00000000 r5:c06103a0 r4:c06596d0 | |
| [<c024723c>] (driver_register) from [<c02482b0>] (__platform_driver_register+0x50/0x64) | |
| r5:c06103a0 r4:ee2e6500 | |
| [<c0248260>] (__platform_driver_register) from [<c06103b8>] (gpio_led_driver_init+0x18/0x20) | |
| [<c06103a0>] (gpio_led_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| [<c0008930>] (do_one_initcall) from [<c05f6e10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c066e700 r8:c066e700 r7:c0631600 r6:c06247d4 r5:000000d2 r4:00000006 | |
| [<c05f6cf4>] (kernel_init_freeable) from [<c04747e0>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c04747d0 r4:00000000 | |
| [<c04747d0>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| ---[ end trace e8233bbbb6dfc4e0 ]--- | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| Key type dns_resolver registered | |
| Registering SWP/SWPB emulation handler | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| rtc rtc0: read_time: fail to read | |
| rtc-hym8563 1-0051: hctosys: unable to read the hardware clock | |
| Waiting for root device /dev/sda1... | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0724 | |
| usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.1: Product: 802.11n WLAN Adapter | |
| usb 2-1.1: Manufacturer: Realtek | |
| usb 2-1.1: SerialNumber: 00e04c000001 | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: New USB device found, idVendor=13fe, idProduct=5200 | |
| usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.3: Product: USB DISK 3.0 | |
| usb 2-1.3: Manufacturer: | |
| usb 2-1.3: SerialNumber: 0702372B957B0650 | |
| usb-storage 2-1.3:1.0: USB Mass Storage device detected | |
| scsi host0: usb-storage 2-1.3:1.0 | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| random: nonblocking pool is initialized | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| scsi 0:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| sd 0:0:0:0: [sda] 60566016 512-byte logical blocks: (31.0 GB/28.8 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| / # ls | |
| bin etc lib mnt sbin usr | |
| boot home lost+found proc sys var | |
| dev init media run tmp | |
| / # ls | |
| bin etc lib mnt sbin usr | |
| boot home lost+found proc sys var | |
| dev init media run tmp | |
| / # /sbin/init | |
| usb 2-1.3: USB disconnect, device number 4 | |
| sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00 | |
| EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 13 (offset 0 size 0 starting block 33794) | |
| Buffer I/O error on device sda1, logical block 33793 | |
| Aborting journal on device sda1-8. | |
| JBD2: Error -5 detected when updating journal superblock for sda1-8. | |
| sd 0:0:0:0: [sda] CDB: | |
| cdb[0]=0x28: 28 00 02 44 0d aa 00 00 f0 00 | |
| blk_update_request: I/O error, dev sda, sector 38014378 | |
| sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00 | |
| Bus errorsd 0:0:0:0: [sda] CDB: | |
| cdb[0]=0x28: | |
| 28EXT4-fs error (device sda1): ext4_find_entry:1289: inode #2: comm sh: reading directory lblock 0 | |
| 00 02 44 0e/ # 9a 00 00 10 00 | |
| blk_update_request: I/O error, dev sda, sector 38014618 | |
| usb 2-1.3: new high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: New USB device found, idVendor=13fe, idProduct=5200 | |
| usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| usb 2-1.3: Product: 2303 Boot ROM | |
| usb 2-1.3: Manufacturer: Phison | |
| usb-storage 2-1.3:1.0: USB Mass Storage device detected | |
| scsi host1: usb-storage 2-1.3:1.0 | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| scsi 1:0:0:0: Direct-Access 2303 PRAM 1.00 PQ: 0 ANSI: 0 CCS | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| usb 2-1.3: reset high-speed USB device number 5 using dwc2 | |
| sd 1:0:0:0: [sdb] Attached SCSI removable disk | |
| / # DDR Version 1.04 20140217 | |
| In | |
| DDR3 | |
| 300MHz | |
| Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB | |
| Memory OK | |
| OUT | |
| BUILD=====2 | |
| No.1 FLASH ID:2c 64 44 4b a9 0 | |
| OK! 282893 | |
| unsigned! | |
| SecureBootEn = 0 0 | |
| Boot ver: 2014-03-03#2.13 | |
| start_linux=====287683 | |
| 1511267 Starting kernel...@0x60408000 | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.16.0-rc1 (ubuntu@radxa) (gcc version 4.8.2 (GCC) ) #2 SMP Fri Jul 18 19:10:51 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 7 pages/cpu @ee7c1000 s7680 r8192 d12800 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk init=/sbin/init root=/dev/mmcblk0p1 rootwait | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2071440K/2097152K available (4279K kernel code, 196K rwdata, 1340K rodata, 2151K init, 308K bss, 25712K reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc0584f0c (5620 kB) | |
| .init : 0xc0585000 - 0xc079ee00 (2152 kB) | |
| .data : 0xc07a0000 - 0xc07d1300 ( 197 kB) | |
| .bss : 0xc07d1308 - 0xc081e660 ( 309 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| Rockchip-ID: 0x33313042 0x32303132 0x31313330 0x56313030 | |
| Rockchip SoC RK3188 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x604337c8 - 0x60433820 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| rockchip_clocks_apply_init_table: applying initial clock settings | |
| rockchip_clk_init_from_table: setting rate of gpll to 891000000 | |
| rockchip_clk_init_from_table: setting rate of cpll to 600000000 | |
| rockchip_clk_init_from_table: setting rate of aclk_cpu to 300000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_cpu to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_cpu to 75000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_ahb2apb to 75000000 | |
| rockchip_clk_init_from_table: setting parent of aclk_peri_pre to cpll | |
| rockchip_clk_init_from_table: setting rate of aclk_peri_pre to 150000000 | |
| rockchip_clk_init_from_table: setting rate of hclk_peri to 150000000 | |
| rockchip_clk_init_from_table: setting rate of pclk_peri to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_sdmmc to 75000000 | |
| rockchip_clk_init_from_table: setting rate of sclk_macref to 50000000 | |
| rockchip_clk_init_from_table: enabling sclk_mac_lbtest | |
| syscon: pmu regmap [mem 0x20004000-0x200040ff] registered | |
| syscon: grf regmap [mem 0x20008000-0x200081ff] registered | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| sdmmc-supply: 3300 mV | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to find supply vin | |
| reg-fixed-voltage regulators:fixed-regulator@0: Failed to register regulator: -517 | |
| platform regulators:fixed-regulator@0: Driver reg-fixed-voltage requests probe deferral | |
| otg-vbus: 5000 mV | |
| usb-vbus: 5000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-gpio soc:i2c@0: using pins 58 (SDA) and 59 (SCL) | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| msgmni has been set to 1469 | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20078000.dma: Loaded driver for PL330 DMAC-2364208 | |
| dma-pl330 20078000.dma: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| VCC_DDR: 1200 mV | |
| VDD_LOG: 1000 mV | |
| VDD_ARM: 875 <--> 1300 mV at 1000 mV | |
| VCC_IO: 3300 mV | |
| VDD_10: 1000 mV | |
| VDD_HDMI: 2500 mV | |
| VCC_18: 1800 mV | |
| VCCA_33: 3300 mV | |
| VCC_RMII: 3300 mV | |
| VCCIO_WL: 3300 mV | |
| VCC18_IO: 1800 mV | |
| VCC_28: 2800 mV | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a 16550A | |
| console [ttyS2] disabled | |
| 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a 16550A | |
| [drm] Initialized drm 1.1.0 20060810 | |
| brd: module loaded | |
| arc_emac 10204000.emac: ARC EMAC detected with id: 0x7fd02 | |
| arc_emac 10204000.emac: IRQ is 51 | |
| arc_emac 10204000.emac: MAC address is now c6:ef:91:8e:60:4b | |
| libphy: Synopsys MII Bus: probed | |
| arc_emac 10204000.emac: connected to SMSC LAN8710/LAN8720 phy with id 0x7c0f1 | |
| dwc2 10180000.dwc2: DWC OTG Controller | |
| dwc2 10180000.dwc2: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.dwc2: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.dwc2 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.dwc2: DWC OTG Controller | |
| dwc2 101c0000.dwc2: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.dwc2: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.16.0-rc1 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.dwc2 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: rtc core: registered hym8563 as rtc0 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Synopsys Designware Multimedia Card Interface Driver | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| platform 10214000.dwmmc: Driver dw_mmc requests probe deferral | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| sdmmc-supply: 3300 mV | |
| sdmmc-supply: supplied by VCC_IO | |
| dw_mmc 10214000.dwmmc: fifo-depth property not found, using value of FIFOTH register as default | |
| dw_mmc 10214000.dwmmc: Using PIO mode. | |
| dw_mmc 10214000.dwmmc: Version ID is 240a | |
| dw_mmc 10214000.dwmmc: DW MMC controller at irq 55, 32 bit host data width, 256 deep fifo | |
| dw_mmc 10214000.dwmmc: 1 slots initialized | |
| input: soc:gpio-keys as /devices/soc/soc:gpio-keys/input/input0 | |
| rtc-hym8563 0-0051: no valid clock/calendar values available | |
| rtc-hym8563 0-0051: hctosys: unable to read the hardware clock | |
| usb-vbus: disabling | |
| otg-vbus: disabling | |
| Freeing unused kernel memory: 2148K (c0585000 - c079e000) | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: device v0bda p0724 is not supported | |
| usb 2-1-port1: unable to enumerate USB device | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: device v13fe p5200 is not supported | |
| usb 2-1-port3: unable to enumerate USB device | |
| Do you want to kexec a kernel over the network ? [y/n] y | |
| * Starting DHCP on eth0 | |
| udhcpc (v1.22.1) started | |
| Sending discover... | |
| arc_emac 10204000.emac eth0: Link is Down | |
| arc_emac 10204000.emac eth0: Link is Up - 100Mbps/Full - flow control off | |
| Sending discover... | |
| Sending select for 192.168.0.98... | |
| Lease of 192.168.0.98 obtained, lease time 43200 | |
| /etc/udhcpc.d/50default: Adding DNS 192.168.0.20 | |
| random: nonblocking pool is initialized | |
| * Found zImage on 192.168.0.20 | |
| Do you want to reboot to the new kernel on the fly ? [y/n] y | |
| Modified cmdline: root=/dev/block/mtd/by-name/linuxroot | |
| Unable to find /proc/device-tree//chosen/linux,stdout-path, printing from purgatory is diabled | |
| Starting new kernel | |
| Disabling non-boot CPUs ... | |
| CPU1: shutdown | |
| CPU2: shutdown | |
| CPU3: shutdown | |
| Bye! | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.18.0-rc4-next-20141117 (ubuntu@radxa) (gcc version 4.9.1 (GCC) ) #3 SMP Tue Nov 25 07:38:27 UTC 2014 | |
| CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Radxa Rock | |
| bootconsole [earlycon0] enabled | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 9 pages/cpu @ee7ba000 s7680 r8192 d20992 u36864 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768 | |
| Kernel command line: console=ttyS2,115200 earlyprintk root=/dev/sda1 rootwait rw | |
| PID hash table entries: 4096 (order: 2, 16384 bytes) | |
| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Memory: 2072796K/2097152K available (4563K kernel code, 233K rwdata, 1508K rodata, 248K init, 322K bss, 24356K reserved, 0K cma-reserved, 1318912K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) | |
| lowmem : 0xc0000000 - 0xef800000 ( 760 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc05f5f54 (6072 kB) | |
| .init : 0xc05f6000 - 0xc0634000 ( 248 kB) | |
| .data : 0xc0634000 - 0xc066e6e0 ( 234 kB) | |
| .bss : 0xc066e6e0 - 0xc06bef28 ( 323 kB) | |
| Hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| L2C-310 enabling early BRESP for Cortex-A9 | |
| L2C-310: enabling full line of zeros but not enabled in Cortex-A9 | |
| L2C-310 ID prefetch enabled, offset 15 lines | |
| L2C-310 dynamic clock gating enabled, standby mode enabled | |
| L2C-310 cache controller enabled, 16 ways, 512 kB | |
| L2C-310: CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001 | |
| sched_clock: 64 bits at 150MHz, resolution 6ns, wraps every 1832519401472ns | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x6047af58 - 0x6047afb0 | |
| CPU1: Booted secondary processor | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated. | |
| CPU: All CPU(s) started in SVC mode. | |
| devtmpfs: initialized | |
| VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
| pinctrl core: initialized pinctrl subsystem | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| No ATAGs? | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 4 bytes. | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| Switched to clocksource arm_global_timer | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
| TCP: Hash tables configured (established 8192 bind 8192) | |
| TCP: reno registered | |
| UDP hash table entries: 512 (order: 2, 16384 bytes) | |
| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| NFS: Registering the id_resolver key type | |
| Key type id_resolver registered | |
| Key type id_legacy registered | |
| bounce: pool size: 64 pages | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| dma-pl330 20018000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20018000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
| dma-pl330 20078000.dma-controller: Loaded driver for PL330 DMAC-241330 | |
| dma-pl330 20078000.dma-controller: DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
| Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
| dw-apb-uart 10124000.serial: ttyS0 at MMIO 0x10124000 (irq = 66, base_baud = 1500000) is a 16550A | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 10126000.serial: ttyS1 at MMIO 0x10126000 (irq = 67, base_baud = 1500000) is a XScale | |
| console [ttyS2] disabled | |
| dw-apb-uart 20064000.serial: ttyS2 at MMIO 0x20064000 (irq = 68, base_baud = 1500000) is a 16550A | |
| console [ttyS2] enabled | |
| console [ttyS2] enabled | |
| bootconsole [earlycon0] disabled | |
| bootconsole [earlycon0] disabled | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 191 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: Couldn't set LCR to 0 | |
| dw-apb-uart 20068000.serial: ttyS3 at MMIO 0x20068000 (irq = 69, base_baud = 1500000) is a XScale | |
| [drm] Initialized drm 1.1.0 20060810 | |
| error detecting cacheinfo..cpu0 | |
| brd: module loaded | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| dwc2 10180000.usb: DWC OTG Controller | |
| dwc2 10180000.usb: new USB bus registered, assigned bus number 1 | |
| dwc2 10180000.usb: irq 48, io mem 0x00000000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: DWC OTG Controller | |
| usb usb1: Manufacturer: Linux 3.18.0-rc4-next-20141117 dwc2_hsotg | |
| usb usb1: SerialNumber: 10180000.usb | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| dwc2 101c0000.usb: DWC OTG Controller | |
| dwc2 101c0000.usb: new USB bus registered, assigned bus number 2 | |
| dwc2 101c0000.usb: irq 49, io mem 0x00000000 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: DWC OTG Controller | |
| usb usb2: Manufacturer: Linux 3.18.0-rc4-next-20141117 dwc2_hsotg | |
| usb usb2: SerialNumber: 101c0000.usb | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| usbcore: registered new interface driver usb-storage | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| rtc (null): read_time: fail to read | |
| rtc-hym8563 1-0051: rtc core: registered hym8563 as rtc0 | |
| act8865: probe of 1-005a failed with error -22 | |
| rk3x-i2c 2002f000.i2c: Initialized RK3xxx I2C bus at f0094000 | |
| softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
| Driver 'mmcblk' needs updating - please use bus_type methods | |
| Synopsys Designware Multimedia Card Interface Driver | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 1 at /home/ubuntu/yocto/build/tmp/work/radxa_rock-poky-linux-gnueabi/linux/3.19+git-next-20141117-r1/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x5c/0x78() | |
| sysfs: cannot create duplicate filename '/devices/platform/gpio-leds/leds/(null)' | |
| Modules linked in: | |
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc4-next-20141117 #3 | |
| Backtrace: | |
| [<c0011d18>] (dump_backtrace) from [<c0011fe0>] (show_stack+0x18/0x1c) | |
| r6:c055b11d r5:00000009 r4:00000000 r3:00200140 | |
| [<c0011fc8>] (show_stack) from [<c0476510>] (dump_stack+0x78/0x94) | |
| [<c0476498>] (dump_stack) from [<c002195c>] (warn_slowpath_common+0x90/0xbc) | |
| r4:ee05fbd0 r3:c0643310 | |
| [<c00218cc>] (warn_slowpath_common) from [<c00219c0>] (warn_slowpath_fmt+0x38/0x40) | |
| r8:00000000 r7:ee2e5240 r6:ee2e7268 r5:ee2e5f80 r4:ee2db000 | |
| [<c002198c>] (warn_slowpath_fmt) from [<c011c8e0>] (sysfs_warn_dup+0x5c/0x78) | |
| r3:ee2dbfdf r2:c055f1bb | |
| [<c011c884>] (sysfs_warn_dup) from [<c011c978>] (sysfs_create_dir_ns+0x7c/0x8c) | |
| r6:ee2e7268 r5:ee2e2408 r4:ffffffef | |
| [<c011c8fc>] (sysfs_create_dir_ns) from [<c01d0da0>] (kobject_add_internal+0x130/0x310) | |
| r6:ee2e5240 r5:ee2e2408 r4:ee2e2408 | |
| [<c01d0c70>] (kobject_add_internal) from [<c01d1148>] (kobject_add+0x78/0x90) | |
| r8:00000000 r7:ee13bc10 r6:ee2e5240 r5:ee2e2408 r4:00000000 | |
| [<c01d10d4>] (kobject_add) from [<c0243d34>] (device_add+0x114/0x510) | |
| r3:00000003 r2:00000000 | |
| r6:00000000 r5:ee2e2408 r4:ee2e2400 | |
| [<c0243c20>] (device_add) from [<c0244290>] (device_create_groups_vargs+0x84/0xcc) | |
| r10:00000000 r9:ffffffea r8:00000000 r7:ee13bc10 r6:ee1adcc0 r5:00000000 | |
| r4:ee2e2400 | |
| [<c024420c>] (device_create_groups_vargs) from [<c024436c>] (device_create_with_groups+0x30/0x38) | |
| r8:00000000 r7:ee13bc10 r6:c06b413c r5:ee13bc10 r4:ee2e68fc r3:ee2e68fc | |
| [<c024433c>] (device_create_with_groups) from [<c02f6604>] (led_classdev_register+0x48/0x164) | |
| [<c02f65bc>] (led_classdev_register) from [<c02f7434>] (create_gpio_led+0x154/0x168) | |
| r6:ee05fd9c r5:c06b0a98 r4:ee2e68fc | |
| [<c02f72e0>] (create_gpio_led) from [<c02f7708>] (gpio_led_probe+0x228/0x2c0) | |
| r8:00000000 r7:ee13bc00 r6:ee13bc10 r5:ee7ee46c r4:ee2e6810 r3:00000000 | |
| [<c02f74e0>] (gpio_led_probe) from [<c024837c>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c0668458 r7:00000000 r6:c06596d0 r5:ee13bc10 | |
| r4:ffffffed | |
| [<c024832c>] (platform_drv_probe) from [<c0246960>] (driver_probe_device+0x140/0x348) | |
| r6:c06b316c r5:c06596d0 r4:ee13bc10 r3:c024832c | |
| [<c0246820>] (driver_probe_device) from [<c0246c24>] (__driver_attach+0x70/0x94) | |
| r9:c066e700 r8:c063eda0 r7:c0651268 r6:c06596d0 r5:ee13bc44 r4:ee13bc10 | |
| [<c0246bb4>] (__driver_attach) from [<c0244d60>] (bus_for_each_dev+0x74/0x98) | |
| r6:c0246bb4 r5:c06596d0 r4:00000000 r3:00000001 | |
| [<c0244cec>] (bus_for_each_dev) from [<c024638c>] (driver_attach+0x20/0x28) | |
| r6:ee29e000 r5:00000000 r4:c06596d0 | |
| [<c024636c>] (driver_attach) from [<c0245fc4>] (bus_add_driver+0x10c/0x1fc) | |
| [<c0245eb8>] (bus_add_driver) from [<c02472e0>] (driver_register+0xa4/0xe8) | |
| r7:c063eda0 r6:00000000 r5:c06103a0 r4:c06596d0 | |
| [<c024723c>] (driver_register) from [<c02482b0>] (__platform_driver_register+0x50/0x64) | |
| r5:c06103a0 r4:ee2e5440 | |
| [<c0248260>] (__platform_driver_register) from [<c06103b8>] (gpio_led_driver_init+0x18/0x20) | |
| [<c06103a0>] (gpio_led_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| [<c0008930>] (do_one_initcall) from [<c05f6e10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c066e700 r8:c066e700 r7:c0631600 r6:c06247d4 r5:000000d2 r4:00000006 | |
| [<c05f6cf4>] (kernel_init_freeable) from [<c04747e0>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c04747d0 r4:00000000 | |
| [<c04747d0>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| ---[ end trace baf531d92689b6a9 ]--- | |
| ------------[ cut here ]------------ | |
| WARNING: CPU: 0 PID: 1 at /home/ubuntu/yocto/build/tmp/work/radxa_rock-poky-linux-gnueabi/linux/3.19+git-next-20141117-r1/linux/lib/kobject.c:240 kobject_add_internal+0x2a4/ | |
| 0x310() | |
| kobject_add_internal failed for (null) with -EEXIST, don't try to register things with the same name in the same directory. | |
| usb 2-1: new high-speed USB device number 2 using dwc2 | |
| Modules linked in: | |
| CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.0-rc4-next-20141117 #3 | |
| Backtrace: | |
| [<c0011d18>] (dump_backtrace) from [<c0011fe0>] (show_stack+0x18/0x1c) | |
| r6:c056d95a r5:00000009 r4:00000000 r3:00200140 | |
| [<c0011fc8>] (show_stack) from [<c0476510>] (dump_stack+0x78/0x94) | |
| [<c0476498>] (dump_stack) from [<c002195c>] (warn_slowpath_common+0x90/0xbc) | |
| r4:ee05fc20 r3:c0643310 | |
| [<c00218cc>] (warn_slowpath_common) from [<c00219c0>] (warn_slowpath_fmt+0x38/0x40) | |
| r8:00000000 r7:ee2e5240 r6:ee2e5240 r5:ffffffef r4:ee2e2408 | |
| [<c002198c>] (warn_slowpath_fmt) from [<c01d0f14>] (kobject_add_internal+0x2a4/0x310) | |
| r3:c048f2c9 r2:c056dd34 | |
| [<c01d0c70>] (kobject_add_internal) from [<c01d1148>] (kobject_add+0x78/0x90) | |
| r8:00000000 r7:ee13bc10 r6:ee2e5240 r5:ee2e2408 r4:00000000 | |
| [<c01d10d4>] (kobject_add) from [<c0243d34>] (device_add+0x114/0x510) | |
| r3:00000003 r2:00000000 | |
| r6:00000000 r5:ee2e2408 r4:ee2e2400 | |
| [<c0243c20>] (device_add) from [<c0244290>] (device_create_groups_vargs+0x84/0xcc) | |
| r10:00000000 r9:ffffffea r8:00000000 r7:ee13bc10 r6:ee1adcc0 r5:00000000 | |
| r4:ee2e2400 | |
| [<c024420c>] (device_create_groups_vargs) from [<c024436c>] (device_create_with_groups+0x30/0x38) | |
| r8:00000000 r7:ee13bc10 r6:c06b413c r5:ee13bc10 r4:ee2e68fc r3:ee2e68fc | |
| [<c024433c>] (device_create_with_groups) from [<c02f6604>] (led_classdev_register+0x48/0x164) | |
| [<c02f65bc>] (led_classdev_register) from [<c02f7434>] (create_gpio_led+0x154/0x168) | |
| r6:ee05fd9c r5:c06b0a98 r4:ee2e68fc | |
| [<c02f72e0>] (create_gpio_led) from [<c02f7708>] (gpio_led_probe+0x228/0x2c0) | |
| r8:00000000 r7:ee13bc00 r6:ee13bc10 r5:ee7ee46c r4:ee2e6810 r3:00000000 | |
| [<c02f74e0>] (gpio_led_probe) from [<c024837c>] (platform_drv_probe+0x50/0xa0) | |
| r10:00000000 r9:00000000 r8:c0668458 r7:00000000 r6:c06596d0 r5:ee13bc10 | |
| r4:ffffffed | |
| [<c024832c>] (platform_drv_probe) from [<c0246960>] (driver_probe_device+0x140/0x348) | |
| r6:c06b316c r5:c06596d0 r4:ee13bc10 r3:c024832c | |
| [<c0246820>] (driver_probe_device) from [<c0246c24>] (__driver_attach+0x70/0x94) | |
| r9:c066e700 r8:c063eda0 r7:c0651268 r6:c06596d0 r5:ee13bc44 r4:ee13bc10 | |
| [<c0246bb4>] (__driver_attach) from [<c0244d60>] (bus_for_each_dev+0x74/0x98) | |
| r6:c0246bb4 r5:c06596d0 r4:00000000 r3:00000001 | |
| [<c0244cec>] (bus_for_each_dev) from [<c024638c>] (driver_attach+0x20/0x28) | |
| r6:ee29e000 r5:00000000 r4:c06596d0 | |
| [<c024636c>] (driver_attach) from [<c0245fc4>] (bus_add_driver+0x10c/0x1fc) | |
| [<c0245eb8>] (bus_add_driver) from [<c02472e0>] (driver_register+0xa4/0xe8) | |
| r7:c063eda0 r6:00000000 r5:c06103a0 r4:c06596d0 | |
| [<c024723c>] (driver_register) from [<c02482b0>] (__platform_driver_register+0x50/0x64) | |
| r5:c06103a0 r4:ee2e5440 | |
| [<c0248260>] (__platform_driver_register) from [<c06103b8>] (gpio_led_driver_init+0x18/0x20) | |
| [<c06103a0>] (gpio_led_driver_init) from [<c0008a4c>] (do_one_initcall+0x11c/0x1d0) | |
| usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
| usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 2-1: Product: USB2.0 Hub | |
| hub 2-1:1.0: USB hub found | |
| hub 2-1:1.0: 4 ports detected | |
| [<c0008930>] (do_one_initcall) from [<c05f6e10>] (kernel_init_freeable+0x11c/0x1e4) | |
| r9:c066e700 r8:c066e700 r7:c0631600 r6:c06247d4 r5:000000d2 r4:00000006 | |
| [<c05f6cf4>] (kernel_init_freeable) from [<c04747e0>] (kernel_init+0x10/0xec) | |
| r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c04747d0 r4:00000000 | |
| [<c04747d0>] (kernel_init) from [<c000ea58>] (ret_from_fork+0x14/0x3c) | |
| r4:00000000 r3:ee05e000 | |
| ---[ end trace baf531d92689b6aa ]--- | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| usbcore: registered new interface driver r8188eu | |
| usbcore: registered new interface driver rtl8723au | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| Key type dns_resolver registered | |
| Registering SWP/SWPB emulation handler | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
| rtc-hym8563 1-0051: no valid clock/calendar values available | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| rtc rtc0: read_time: fail to read | |
| rtc-hym8563 1-0051: hctosys: unable to read the hardware clock | |
| Waiting for root device /dev/sda1... | |
| usb 2-1.1: new high-speed USB device number 3 using dwc2 | |
| usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0724 | |
| usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.1: Product: 802.11n WLAN Adapter | |
| usb 2-1.1: Manufacturer: Realtek | |
| usb 2-1.1: SerialNumber: 00e04c000001 | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| usb 2-1.3: new high-speed USB device number 4 using dwc2 | |
| usb 2-1.3: New USB device found, idVendor=13fe, idProduct=5200 | |
| usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 2-1.3: Product: USB DISK 3.0 | |
| usb 2-1.3: Manufacturer: | |
| usb 2-1.3: SerialNumber: 0702372B957B0650 | |
| usb-storage 2-1.3:1.0: USB Mass Storage device detected | |
| scsi host0: usb-storage 2-1.3:1.0 | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| random: nonblocking pool is initialized | |
| scsi 0:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| sd 0:0:0:0: [sda] 60566016 512-byte logical blocks: (31.0 GB/28.8 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA | |
| sda: sda1 | |
| sd 0:0:0:0: [sda] Attached SCSI removable disk | |
| EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities | |
| EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities | |
| EXT4-fs (sda1): recovery complete | |
| EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) | |
| VFS: Mounted root (ext4 filesystem) on device 8:1. | |
| devtmpfs: mounted | |
| Freeing unused kernel memory: 248K (c05f6000 - c0634000) | |
| systemd[1]: systemd 216 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS | |
| +KMOD -IDN ) | |
| systemd[1]: Detected architecture 'arm'. | |
| Welcome to Poky (Yocto Project Reference Distro) 1.7 (dizzy)! | |
| systemd[1]: Failed to insert module 'ipv6' | |
| systemd[1]: Set hostname to <radxa-rock>. | |
| systemd[1]: Initializing machine ID from random generator. | |
| usb 2-1.3: USB disconnect, device number 4 | |
| sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00 | |
| sd 0:0:0:0: [sda] CDB: | |
| cdb[0]=0x28: 28 00 02 c4 67 3a 00 00 48 00 | |
| blk_update_request: I/O error, dev sda, sector 46425914 | |
| sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00 | |
| EXT4-fs error (device sda1): ext4_wait_block_bitmap:494: comm kworker/u8:1: Cannot read block bitmap - block_group = 193, block_bitmap = 6291457 | |
| EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 1566722 (offset 0 size 4096 starting block 6356993) | |
| Buffer I/O error on device sda1, logical block 6356992 | |
| systemd[64]: Failed to execute /lib/systemd/system-generators/systemd-fstab-generator: Input/output error | |
| systemd[59]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with error code 127. | |
| systemd[59]: /lib/systemd/system-generators/systemd-sysv-generator terminated by signal SEGV. | |
| systemd[59]: /lib/systemd/system-generators/systemd-fstab-generator failed with error code 1. | |
| sd 0:0:0:0: [sda] CDB: | |
| cdb[0]=0x28: 28 00 02 c4 67 a2 00 00 20 00 | |
| blk_update_request: I/O error, dev sda, sector 46426018 | |
| JBD2: Error -5 detected when updating journal superblock for sda1-8. | |
| systemd[59]: /lib/systemd/system-generators/systemd-debug-generator terminated by signal SEGV. | |
| systemd[59]: /lib/systemd/system-generators/systemd-rc-local-generator terminated by signal SEGV. | |
| systemd[59]: /lib/systemd/system-generators/systemd-efi-boot-generator terminated by signal SEGV. | |
| EXT4-fs error (device sda1): ext4_find_entry:1289: inode #261351: comm systemd: reading directory lblock 0 | |
| EXT4-fs (sda1): previous I/O error to superblock detected | |
| EXT4-fs warning (device sda1): __ext4_read_dirblock:884: error -5 reading directory block (ino 1566808, block 0) | |
| EXT4-fs warning (device sda1): __ext4_read_dirblock:674: error -5 reading directory block (ino 1436311, block 0) | |
| EXT4-fs error (device sda1): ext4_read_inode_bitmap:185: comm systemd: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1041 | |
| EXT4-fs (sda1): previous I/O error to superblock detected | |
| EXT4-fs error (device sda1): ext4_wait_block_bitmap:494: comm systemd: Cannot read block bitmap - block_group = 0, block_bitmap = 1025 | |
| EXT4-fs (sda1): previous I/O error to superblock detected | |
| EXT4-fs error (device sda1): ext4_wait_block_bitmap:494: comm systemd: Cannot read block bitmap - block_group = 1, block_bitmap = 1026 | |
| EXT4-fs (sda1): previous I/O error to superblock detected | |
| EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 8161 (offset 0 size 61440 starting block 65551) | |
| Buffer I/O error on device sda1, logical block 65536 | |
| Buffer I/O error on device sda1, logical block 65537 | |
| Buffer I/O error on device sda1, logical block 65538 | |
| Buffer I/O error on device sda1, logical block 65539 | |
| Buffer I/O error on device sda1, logical block 65540 | |
| Buffer I/O error on device sda1, logical block 65541 | |
| Buffer I/O error on device sda1, logical block 65542 | |
| Buffer I/O error on device sda1, logical block 65543 | |
| Buffer I/O error on device sda1, logical block 65544 | |
| EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 8161 (offset 65536 size 139264 starting block 65582) | |
| EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 8161 (offset 65536 size 139264 starting block 65586) | |
| EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 8161 (offset 233472 size 4096 starting block 65594) | |
| EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 8161 (offset 417792 size 4096 starting block 65639) | |
| EXT4-fs error (device sda1): ext4_wait_block_bitmap:494: comm systemd: Cannot read block bitmap - block_group = 1, block_bitmap = 1026 | |
| EXT4-fs (sda1): previous I/O error to superblock detected | |
| EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 8161 (offset 425984 size 20480 starting block 65645) | |
| systemd[1]: Caught <BUS>, dumped core as pid 69. | |
| systemd[1]: Freezing execution. | |
| Aborting journal on device sda1-8. | |
| JBD2: Error -5 detected when updating journal superblock for sda1-8. | |
| usb 2-1.3: new high-speed USB device number 5 using dwc2 | |
| usb 2-1.3: New USB device found, idVendor=13fe, idProduct=5200 | |
| usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| usb 2-1.3: Product: 2303 Boot ROM | |
| usb 2-1.3: Manufacturer: Phison | |
| usb-storage 2-1.3:1.0: USB Mass Storage device detected | |
| scsi host1: usb-storage 2-1.3:1.0 | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| scsi 1:0:0:0: Direct-Access 2303 PRAM 1.00 PQ: 0 ANSI: 0 CCS | |
| platform 10204000.ethernet: Driver rockchip_emac requests probe deferral | |
| reg-fixed-voltage sdmmc-regulator: Failed to find supply vin | |
| reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517 | |
| platform sdmmc-regulator: Driver reg-fixed-voltage requests probe deferral | |
| sd 1:0:0:0: [sdb] Attached SCSI removable disk |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment