Skip to content

Instantly share code, notes, and snippets.

/-

Created April 28, 2017 16:39
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save anonymous/5673d7fdde4688ac1c5641151869c4af to your computer and use it in GitHub Desktop.
Save anonymous/5673d7fdde4688ac1c5641151869c4af to your computer and use it in GitHub Desktop.
Download ZIP
Raw
-
[ 1.041389] aer 0000:00:1c.4:pcie002: service driver aer loaded
[ 1.041411] aer 0000:00:1c.5:pcie002: service driver aer loaded
[ 1.041424] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.041428] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.041433] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 1.041442] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.041446] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.041451] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[ 1.041459] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 1.041462] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.041467] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded
[ 1.041527] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.041988] Linux agpgart interface v0.103
[ 1.041992] intel_idle: MWAIT substates: 0x11142120
[ 1.041992] intel_idle: v0.4.1 model 0x4E
[ 1.042231] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.042294] Failed to find cpu0 device node
[ 1.042296] Unable to detect cache hierarchy from DT for CPU 0
[ 1.044327] brd: module loaded
[ 1.045485] loop: module loaded
[ 1.045532] ahci 0000:00:17.0: version 3.0
[ 1.055801] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl RAID mode
[ 1.055814] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.056388] scsi host0: ahci
[ 1.056560] scsi host1: ahci
[ 1.056673] scsi host2: ahci
[ 1.056714] ata1: SATA max UDMA/133 abar m2048@0xdf133000 port 0xdf133100 irq 123
[ 1.056718] ata2: SATA max UDMA/133 abar m2048@0xdf133000 port 0xdf133180 irq 123
[ 1.056722] ata3: SATA max UDMA/133 abar m2048@0xdf133000 port 0xdf133200 irq 123
[ 1.057003] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 1.057006] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.058200] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.058287] mousedev: PS/2 mouse device common for all mice
[ 1.058366] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.058477] NET: Registered protocol family 10
[ 1.058694] NET: Registered protocol family 17
[ 1.058899] microcode: sig=0x406e3, pf=0x80, revision=0x9e
[ 1.059009] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.059131] registered taskstats version 1
[ 1.059526] Key type encrypted registered
[ 1.061197] OF: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[ 1.061665] ### dt-test ### start of unittest - you will see error messages
[ 1.061725] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 1.061731] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[ 1.061739] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[ 1.061744] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[ 1.061748] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[ 1.061752] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[ 1.061856] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[ 1.062561] OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
[ 1.062567] OF: overlay: overlay #5 is not topmost
[ 1.062948] i2c i2c-0: Added multiplexed i2c bus 1
[ 1.063126] i2c i2c-0: Added multiplexed i2c bus 2
[ 1.063446] ### dt-test ### end of unittest - 149 passed, 0 failed
[ 1.069035] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.386618] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.386650] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.386676] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.389021] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[ 1.389028] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.389050] ata3.00: ATA-9: SanDisk SD8SNAT128G1002, Z2317002, max UDMA/133
[ 1.389056] ata3.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.389087] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE1N, AS00, max UDMA/133
[ 1.391928] ata1.00: configured for UDMA/133
[ 1.391971] ata2.00: configured for UDMA/133
[ 1.392462] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[ 1.397199] ata3.00: configured for UDMA/133
[ 1.476982] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.476992] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.477114] sd 0:0:0:0: [sda] Write Protect is off
[ 1.477121] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.477291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.483753] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE1N AS00 PQ: 0 ANSI: 5
[ 1.512164] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.513076] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.532667] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.532675] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.532964] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.533517] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SNAT1 7002 PQ: 0 ANSI: 5
[ 1.616837] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.617536] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.617542] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.617740] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.622090] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.623077] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.623103] md: Waiting for all devices to be available before autodetect
[ 1.623107] md: If you don't use raid, use raid=noautodetect
[ 1.623421] md: Autodetecting RAID arrays.
[ 1.623426] md: Scanned 0 and added 0 devices.
[ 1.623428] md: autorun ...
[ 1.623431] md: ... autorun DONE.
[ 1.668632] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 1.668647] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[ 1.669336] Freeing unused kernel memory: 952K (ffffffff8187e000 - ffffffff8196c000)
[ 1.669340] Write protecting the kernel read-only data: 8192k
[ 1.669614] Freeing unused kernel memory: 360K (ffff8800015a6000 - ffff880001600000)
[ 1.669855] Freeing unused kernel memory: 64K (ffff8800017f0000 - ffff880001800000)
[ 1.908989] random: fast init done
[ 2.076203] tsc: Refined TSC clocksource calibration: 1992.007 MHz
[ 2.076216] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d5f483f0, max_idle_ns: 881590717882 ns
[ 3.116432] clocksource: Switched to clocksource tsc
[ 3.335437] systemd[1]: systemd 233 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL -XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN default-hierarchy=hybrid)
[ 3.335584] systemd[1]: Detected architecture x86-64.
[ 3.387871] systemd[1]: Set hostname to <dbox2>.
[ 4.462904] systemd-fstab-generator[130]: Mount point ext4 is not a valid path, ignoring.
[ 5.019543] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.019696] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.019922] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.020090] systemd[1]: Created slice System Slice.
[ 5.020194] systemd[1]: Created slice system-getty.slice.
[ 5.020284] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.020349] systemd[1]: Listening on udev Control Socket.
[ 5.285163] EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
[ 5.301224] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 5.473563] systemd-journald[139]: Received request to flush runtime journal from PID 1
[ 7.335486] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 7.336925] ACPI: Lid Switch [LID]
[ 7.336976] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 7.337010] ACPI: Sleep Button [SLPB]
[ 7.337055] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.337084] ACPI: Power Button [PWRF]
[ 7.530378] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input4
[ 7.556896] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 7.556912] ACPI: Battery Slot [BAT0] (battery present)
[ 7.571913] wmi: Mapper loaded
[ 7.604801] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 7.604855] ACPI: AC Adapter [AC0] (on-line)
[ 7.697792] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.697798] ACPI: Thermal Zone [THRM] (34 C)
[ 7.873300] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.900393] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 8.308688] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 8.544635] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 8.544647] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
[ 8.544653] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000041/00002000
[ 8.544657] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
[ 8.544661] pcieport 0000:00:1c.5: [ 6] Bad TLP
[ 8.667111] EFI Variables Facility v0.08 2004-May-17
[ 8.683089] [drm] Initialized
[ 8.777517] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[ 8.777587] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[ 8.796486] ACPI: bus type USB registered
[ 8.796512] usbcore: registered new interface driver usbfs
[ 8.796524] usbcore: registered new interface driver hub
[ 8.796547] usbcore: registered new device driver usb
[ 8.822456] random: crng init done
[ 9.018465] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.018477] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.047059] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc900001f1000, 70:4d:7b:98:21:3e, XID 10900800 IRQ 125
[ 9.047072] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.132697] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1a3b:2231
[ 9.132706] ath10k_pci 0000:03:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[ 9.133168] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7
[ 9.229988] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 9.382744] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 93da0176
[ 9.844202] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.844215] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 9.845431] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 9.845444] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 9.845612] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.845618] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.845622] usb usb1: Product: xHCI Host Controller
[ 9.845625] usb usb1: Manufacturer: Linux 4.9.16-gentoo xhci-hcd
[ 9.845628] usb usb1: SerialNumber: 0000:00:14.0
[ 9.845779] hub 1-0:1.0: USB hub found
[ 9.845821] hub 1-0:1.0: 12 ports detected
[ 9.846997] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.847004] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 9.847073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 9.847077] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.847081] usb usb2: Product: xHCI Host Controller
[ 9.847084] usb usb2: Manufacturer: Linux 4.9.16-gentoo xhci-hcd
[ 9.847087] usb usb2: SerialNumber: 0000:00:14.0
[ 9.847229] hub 2-0:1.0: USB hub found
[ 9.847257] hub 2-0:1.0: 6 ports detected
[ 9.993972] Adding 10485756k swap on /dev/sda3. Priority:-1 extents:1 across:10485756k
[ 10.206095] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 10.378300] usb 1-2: New USB device found, idVendor=046d, idProduct=c52f
[ 10.378306] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.378310] usb 1-2: Product: USB Receiver
[ 10.378313] usb 1-2: Manufacturer: Logitech
[ 10.516090] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 10.688079] usb 1-6: New USB device found, idVendor=058f, idProduct=6366
[ 10.688085] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.688089] usb 1-6: Product: Flash Card Reader/Writer
[ 10.688093] usb 1-6: Manufacturer: Generic
[ 10.688096] usb 1-6: SerialNumber: 058F63666485
[ 10.730892] nvidia: loading out-of-tree module taints kernel.
[ 10.730902] nvidia: module license 'NVIDIA' taints kernel.
[ 10.730905] Disabling lock debugging due to kernel taint
[ 10.741903] nvidia-nvlink: Nvlink Core is being initialized, major device number 250
[ 10.741931] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.26 Thu Dec 8 18:36:43 PST 2016
[ 10.741937] (using threaded interrupts)
[ 11.155795] ath10k_pci 0000:03:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 11.162644] ath: EEPROM regdomain: 0x6a
[ 11.162646] ath: EEPROM indicates we should expect a direct regpair map
[ 11.162648] ath: Country alpha2 being used: 00
[ 11.162649] ath: Regpair used: 0x6a
[ 11.188485] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[ 11.278995] [drm] Memory usable by graphics device = 4096M
[ 11.279001] [drm] Replacing VGA console driver
[ 11.284659] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.284663] [drm] Driver supports precise vblank timestamp query.
[ 11.294180] [drm] GuC firmware load skipped
[ 11.299712] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.303101] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 11.303172] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 11.303216] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input7
[ 11.351585] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[ 11.429787] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.429806] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 11.464281] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.26 Thu Dec 8 18:04:14 PST 2016
[ 11.480013] nvidia_drm: no symbol version for drm_framebuffer_cleanup
[ 11.480578] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 11.571630] fbcon: inteldrmfb (fb0) is primary device
[ 11.653111] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
[ 11.653447] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 11.653448] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.653450] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 11.653451] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 11.653452] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 11.653453] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 11.653454] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 11.654237] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 11.658178] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 11.658180] snd_hda_codec_generic hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.658181] snd_hda_codec_generic hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.658182] snd_hda_codec_generic hdaudioC0D2: mono: mono_out=0x0
[ 11.658183] snd_hda_codec_generic hdaudioC0D2: dig-out=0x3/0x0
[ 11.658184] snd_hda_codec_generic hdaudioC0D2: inputs:
[ 11.659431] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 11.659515] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 11.659595] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 11.834485] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 11.834548] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 11.834587] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 11.834622] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 11.834657] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 11.834709] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 11.834744] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 11.853551] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 12.198183] fuse init (API version 7.26)
[ 12.488631] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0001/input/input11
[ 12.488745] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
[ 12.490477] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0002/input/input12
[ 12.556230] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
[ 12.556249] usbcore: registered new interface driver usbhid
[ 12.556250] usbhid: USB HID core driver
[ 12.593941] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 12.594012] scsi host3: usb-storage 1-6:1.0
[ 12.594094] usbcore: registered new interface driver usb-storage
[ 12.840004] Console: switching to colour frame buffer device 200x56
[ 12.872314] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.036805] [drm] RC6 on
[ 13.146618] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 13.559965] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 13.597297] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 14.162878] sd 3:0:0:0: [sdc] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 14.166581] sd 3:0:0:0: [sdc] Write Protect is off
[ 14.167984] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 14.170190] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 14.182265] sdc: sdc1
[ 14.188819] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 22.901589] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 22.978775] r8169 0000:02:00.0 enp2s0: link down
[ 22.978856] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 22.981946] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 22.982464] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 22.982507] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
[ 22.982553] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 22.982591] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
[ 23.025450] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 23.025497] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
[ 23.025546] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00002041/00002000
[ 23.025583] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
[ 23.025612] pcieport 0000:00:1c.5: [ 6] Bad TLP
[ 24.967272] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 25.015199] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 25.015255] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
[ 25.015301] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 25.015339] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
[ 26.958264] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 27.333343] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 27.902234] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)!
[ 32.020996] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 32.021058] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
[ 32.021125] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 32.021168] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
[ 32.021200] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 32.021236] pcieport 0000:00:1c.5: can't find device of ID00e5
[ 32.021238] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 32.021274] pcieport 0000:00:1c.5: can't find device of ID00e5
[ 32.021275] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 32.021312] pcieport 0000:00:1c.5: can't find device of ID00e5
[ 32.065215] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: id=00e5
[ 32.065264] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
[ 32.065309] pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
[ 32.065346] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
[ 34.006110] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 34.583043] ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)!
[ 38.578790] wlp3s0: authenticate with d4:7b:b0:11:3d:8b
[ 38.609076] wlp3s0: send auth to d4:7b:b0:11:3d:8b (try 1/3)
[ 38.611941] wlp3s0: authenticated
[ 38.616155] wlp3s0: associate with d4:7b:b0:11:3d:8b (try 1/3)
[ 38.617296] wlp3s0: RX AssocResp from d4:7b:b0:11:3d:8b (capab=0x1011 status=0 aid=1)
[ 38.619159] wlp3s0: associated
[ 38.619203] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 355.240391] usb 1-6: USB disconnect, device number 3
[ 356.437855] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[ 356.612728] usb 1-6: New USB device found, idVendor=058f, idProduct=6366
[ 356.614108] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 356.615495] usb 1-6: Product: Flash Card Reader/Writer
[ 356.616852] usb 1-6: Manufacturer: Generic
[ 356.618233] usb 1-6: SerialNumber: 058F63666485
[ 356.620222] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 356.622326] scsi host3: usb-storage 1-6:1.0
[ 357.679435] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 358.243920] sd 3:0:0:0: [sdc] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 358.247386] sd 3:0:0:0: [sdc] Write Protect is off
[ 358.248907] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 358.251275] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 358.263139] sdc: sdc1
[ 358.269334] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 2133.894620] vgaarb: this pci device is not a vga device
[ 2133.999841] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 2133.999918] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 2133.999958] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 2133.999995] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 2134.000030] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 2134.000084] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 2134.000119] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 2134.002952] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 2134.163677] nvidia-modeset: Allocated GPU:0 (GPU-aaccb9a7-ed1d-b91a-5770-605091ede72b) @ PCI:0000:01:00.0
[ 2134.163823] nvidia-modeset: Freed GPU:0 (GPU-aaccb9a7-ed1d-b91a-5770-605091ede72b) @ PCI:0000:01:00.0
[ 2134.218612] vgaarb: this pci device is not a vga device
[ 2135.590948] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment