———————————————————
>>>СКАЧАТЬ<<<
———————————————————
Download link
———————————————————
Cybex strength systems
Secure belt in place with set screws. Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor or moderate injury. Remove the four BHSCS securing one of the halves. Pay close attention to belts, cables, grips cybex strength systems pulleys and their connections. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. Replace all worn cables and belts. Apply with a soft damp cloth. Cable Pulley Bracket Roll If machine needs weight stacks Top Weight Connector removed before moving to desired.
Wave in belt Replace belt if any Examine edge of belt both sides. Following theses precautions are the best protection against personal injury or damage to equipment or facility. Pay close attention to belts, cables, grips or pulleys and their connections. Replace all worn handles immediately. Cable Pulley Bracket Roll If machine needs weight stacks Top Weight Connector removed before moving to desired. Cybex is not responsible for performing regular inspection and maintenance actions for your machines.
Verify parts list shown below. Cable Pulley Bracket Top Weight. Move to desired location. Remove the four BHSCS securing one of the halves. Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor or moderate injury. DO NOT use the machine if found in this condition.
Cybex strength systems
Cybex is not responsible for the actual anchoring of equipment. Place weight stack pin in each plate to verify proper installation. The system assures that returned materials are properly handled and analyzed. Replace all worn handles immediately. Cable Pulley Bracket Top Weight. Remove the four BHSCS securing one of the halves.
DO NOT use the machine if found in this condition. Never pin the weights in an elevated position.