Created
June 12, 2017 05:52
-
-
Save anonymous/5efcd3a091b47c21d726c11079c7647a to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-21-generic] (local build) | |
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Seagate Barracuda 7200.10 | |
Device Model: ST3160815AS | |
Serial Number: 6RAAMDJJ | |
Firmware Version: 4.AAB | |
User Capacity: 160,041,885,696 bytes [160 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ATA/ATAPI-7 (minor revision not indicated) | |
Local Time is: Mon Jun 12 05:51:10 2017 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x82) Offline data collection activity | |
was completed without error. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 430) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 54) minutes. | |
SMART Attributes Data Structure revision number: 10 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0003 100 097 000 Pre-fail Always - 0 | |
4 Start_Stop_Count 0x0032 092 092 020 Old_age Always - 9083 | |
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 501656001 | |
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 12714 | |
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
12 Power_Cycle_Count 0x0032 092 092 020 Old_age Always - 9142 | |
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 426 | |
189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2 | |
190 Airflow_Temperature_Cel 0x0022 063 047 045 Old_age Always - 37 (Min/Max 24/38) | |
194 Temperature_Celsius 0x0022 037 053 000 Old_age Always - 37 (0 13 0 0 0) | |
195 Hardware_ECC_Recovered 0x001a 077 073 000 Old_age Always - 54439762 | |
197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 24 | |
198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 24 | |
199 UDMA_CRC_Error_Count 0x003e 200 197 000 Old_age Always - 483 | |
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 | |
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 | |
SMART Error Log Version: 1 | |
ATA Error Count: 432 (device log contains only the most recent five errors) | |
CR = Command Register [HEX] | |
FR = Features Register [HEX] | |
SC = Sector Count Register [HEX] | |
SN = Sector Number Register [HEX] | |
CL = Cylinder Low Register [HEX] | |
CH = Cylinder High Register [HEX] | |
DH = Device/Head Register [HEX] | |
DC = Device Command Register [HEX] | |
ER = Error register [HEX] | |
ST = Status register [HEX] | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Error 432 occurred at disk power-on lifetime: 12714 hours (529 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 00 e4 a6 3f ea Error: UNC at LBA = 0x0a3fa6e4 = 171943652 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 08 e0 a6 3f ea 00 02:04:57.522 READ DMA | |
27 00 00 00 00 00 e0 00 02:05:01.284 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] | |
ec 00 00 00 00 00 a0 00 02:05:01.232 IDENTIFY DEVICE | |
ef 03 46 00 00 00 a0 00 02:05:01.224 SET FEATURES [Set transfer mode] | |
27 00 00 00 00 00 e0 00 02:05:01.217 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] | |
Error 431 occurred at disk power-on lifetime: 12714 hours (529 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 00 e4 a6 3f ea Error: UNC at LBA = 0x0a3fa6e4 = 171943652 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 08 e0 a6 3f ea 00 02:04:57.522 READ DMA | |
c8 00 08 d8 a6 3f ea 00 02:04:57.522 READ DMA | |
c8 00 08 d0 a6 3f ea 00 02:04:57.522 READ DMA | |
c8 00 08 c8 a6 3f ea 00 02:04:57.522 READ DMA | |
c8 00 08 c0 a6 3f ea 00 02:04:57.522 READ DMA | |
Error 430 occurred at disk power-on lifetime: 12714 hours (529 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 00 a4 a3 3f ea Error: UNC at LBA = 0x0a3fa3a4 = 171942820 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 08 a0 a3 3f ea 00 02:04:53.946 READ DMA | |
27 00 00 00 00 00 e0 00 02:04:53.938 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] | |
ec 00 00 00 00 00 a0 00 02:04:53.933 IDENTIFY DEVICE | |
ef 03 46 00 00 00 a0 00 02:04:53.874 SET FEATURES [Set transfer mode] | |
27 00 00 00 00 00 e0 00 02:04:53.867 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] | |
Error 429 occurred at disk power-on lifetime: 12714 hours (529 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 00 a4 a3 3f ea Error: UNC at LBA = 0x0a3fa3a4 = 171942820 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 08 a0 a3 3f ea 00 02:04:50.198 READ DMA | |
c8 00 08 98 a3 3f ea 00 02:04:50.198 READ DMA | |
c8 00 08 90 a3 3f ea 00 02:04:50.198 READ DMA | |
c8 00 08 88 a3 3f ea 00 02:04:50.198 READ DMA | |
c8 00 08 80 a3 3f ea 00 02:04:50.198 READ DMA | |
Error 428 occurred at disk power-on lifetime: 12714 hours (529 days + 18 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 00 13 a2 3f ea Error: UNC at LBA = 0x0a3fa213 = 171942419 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 08 10 a2 3f ea 00 02:04:40.398 READ DMA | |
27 00 00 00 00 00 e0 00 02:04:43.880 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] | |
ec 00 00 00 00 00 a0 00 02:04:43.826 IDENTIFY DEVICE | |
ef 03 46 00 00 00 a0 00 02:04:43.818 SET FEATURES [Set transfer mode] | |
27 00 00 00 00 00 e0 00 02:04:43.813 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] | |
SMART Self-test log structure revision number 1 | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment