Created
November 22, 2013 16:10
-
-
Save anonymous/7602383 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
=== START OF INFORMATION SECTION === | |
Model Family: Intel 330 Series SSDs | |
Device Model: INTEL SSDSC2CT120A3 | |
Serial Number: CVMP216104WM120BGN | |
LU WWN Device Id: 5 001517 bb28d7bf7 | |
Firmware Version: 300i | |
User Capacity: 120 034 123 776 bytes [120 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: 8 | |
ATA Standard is: ACS-2 revision 3 | |
Local Time is: Fri Nov 22 20:09:47 2013 MSK | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 2097) seconds. | |
Offline data collection | |
capabilities: (0x7f) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Abort Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 48) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 2) minutes. | |
SCT capabilities: (0x0021) SCT Status supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 10 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 | |
9 Power_On_Hours_and_Msec 0x0032 000 000 000 Old_age Always - 900024h+49m+53.690s | |
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1033 | |
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0 | |
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0 | |
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1033 | |
225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 126267 | |
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 | |
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 | |
241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 126267 | |
242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 161198 | |
249 NAND_Writes_1GiB 0x0013 100 100 000 Pre-fail Always - 3217 | |
SMART Error Log not supported | |
SMART Self-test Log not supported | |
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run | |
SMART Selective self-test log data structure revision number 0 | |
Note: revision number not 1 implies that no selective self-test has ever been run | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment