Created a VM, added more disks:
floh@fuchi-cyber220:~:1305% iohyve info
Name Size RAM CPU OS Loader
fbsd102 - 2G 1 default bhyveload
fbsd102/disk0 2G 2G 1 default bhyveload
fbsd102/disk1 2G 2G 1 default bhyveload
fbsd102/disk2 4G 2G 1 default bhyveload
Install FreeBSD 10.2 (the one I used for my laptop):
floh@fuchi-cyber220:~:1305% sudo iohyve install fbsd102 FreeBSD-10.2-RELEASE-amd64-disc1.iso
Installing fbsd102...
floh@fuchi-cyber220:~:1307% sudo iohyve console fbsd102
Starting console on fbsd102...
~~. to escape console [uses cu(1) for console]
Connected
- Chose Auto (ZFS), added only ada2/disk2 to the rootpool.
┌────────────────ZFS Configuration───────────────────┐
│ Configure Options: │
│ ┌────────────────────────────────────────────────┐ │
│ │ >>> Install Proceed with Installation │ │
│ │ T Pool Type/Disks: stripe: 1 disk │ │
│ │ - Rescan Devices * │ │
│ │ - Disk Info * │ │
│ │ N Pool Name zroot │ │
│ │ 4 Force 4K Sectors? YES │ │
│ │ E Encrypt Disks? YES │ │
│ │ P Partition Scheme GPT │ │
│ │ S Swap Size 256m │ │
│ │ M Mirror Swap? NO │ │
│ │ W Encrypt Swap? YES │ │
│ └────────────────────────────────────────────────┘ │
├────────────────────────────────────────────────────┤
│ <Select> <Cancel> │
└────────────────────────────────────────────────────┘
-
proceed with installation.
-
remove disk1 from the VM:
floh@fuchi-cyber220:~:1313% sudo iohyve remove fbsd102 disk1 Are you sure you want to remove disk1 from fbsd102 [Y/N]? y floh@fuchi-cyber220:~:1314% iohyve info Name Size RAM CPU OS Loader fbsd102 - 2G 1 default bhyveload fbsd102/disk0 2G 2G 1 default bhyveload fbsd102/disk2 4G 2G 1 default bhyveload -
shuffle disks arount?
floh@fuchi-cyber220:~:1340% sudo zfs rename zroot/iohyve/fbsd102/disk{0,1} floh@fuchi-cyber220:~:1342% sudo zfs rename zroot/iohyve/fbsd102/disk{2,0} floh@fuchi-cyber220:~:1342% sudo zfs rename zroot/iohyve/fbsd102/disk{1,2} -
seems to work:
floh@fuchi-cyber220:~:1343% iohyve info Name Size RAM CPU OS Loader fbsd102 - 2G 1 default bhyveload fbsd102/disk0 4G 2G 1 default bhyveload fbsd102/disk2 2G 2G 1 default bhyveload -
boot the VM:
-
result:
floh@fuchi-cyber220:~:1344% sudo iohyve start fbsd102
Starting fbsd102... (Takes 15 seconds for FreeBSD guests)
floh@fuchi-cyber220:~:1344%
floh@fuchi-cyber220:~:1345% sudo iohyve console fbsd102
Starting console on fbsd102...
~~. to escape console [uses cu(1) for console]
Connected
/
______ ____ _____ _____
| ____| | _ \ / ____| __ \
| |___ _ __ ___ ___ | |_) | (___ | | | |
| ___| '__/ _ \/ _ \| _ < \___ \| | | |
| | | | | __/ __/| |_) |____) | |__| |
| | | | | | || | | |
|_| |_| \___|\___||____/|_____/|_____/ ``` `
s` `.....---.......--.``` -/
+============Welcome to FreeBSD===========+ +o .--` /y:` +.
| | yo`:. :o `+-
| 1. Boot Multi User [Enter] | y/ -/` -o/
| 2. Boot [S]ingle User | .- ::/sy+:.
| 3. [Esc]ape to loader prompt | / `-- /
| 4. Reboot | `: :`
| | `: :`
| Options: | / /
| 5. [K]ernel: kernel (1 of 2) | .- -.
| 6. Configure Boot [O]ptions... | -- -.
| | `:` `:`
| | .-- `--.
| | .---.....----.
+=========================================+
/boot/kernel/kernel text=0xfc8de8 data=0x1283b0+0x207880 syms=[0x8+0x145350+0x8+0x15fe20]
/boot/kernel/zfs.ko size 0x2f9b00 at 0x199e000
loading required module 'opensolaris'
/boot/kernel/opensolaris.ko size 0x6048 at 0x1c98000
/boot/kernel/geom_eli.ko size 0x21568 at 0x1c9f000
loading required module 'crypto'
/boot/kernel/crypto.ko size 0x35318 at 0x1cc1000
/boot/encryption.key size=0x1000
/boot/kernel/aesni.ko size 0x5a30 at 0x1cf8000
/boot/zfs/zpool.cache size=0x8bc
Booting...
Copyright (c) 1992-2015 The FreeBSD Project.
[... kernel messages ...]
ada1: <BHYVE SATA DISK 001> ACS-2 ATA SATA 3.x device
ada1: Serial Number BHYVE-D12E-A75C-27F5
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2048MB (4194304 512 byte sectors: 16H 63S/T 4161C)
ada1: Previously was known as ad6
random: unblocking device.
Timecounter "TSC-low" frequency 1345403547 Hz quality 1000
Enter passphrase for ada0p4:
GEOM_ELI: Wrong key for ada0p4. Tries left: 2.
Enter passphrase for ada0p4:
GEOM_ELI: Wrong key for ada0p4. Tries left: 1.
Enter passphrase for ada0p4:
GEOM_ELI: Wrong key for ada0p4. No tries left.
Enter passphrase for diskid/DISK-BHYVE-F485-E5AF-7C59p4:
GEOM_ELI: Wrong key for diskid/DISK-BHYVE-F485-E5AF-7C59p4. Tries left: 2.
Enter passphrase for diskid/DISK-BHYVE-F485-E5AF-7C59p4:
GEOM_ELI: Wrong key for diskid/DISK-BHYVE-F485-E5AF-7C59p4. Tries left: 1.
Enter passphrase for diskid/DISK-BHYVE-F485-E5AF-7C59p4:
GEOM_ELI: Wrong key for diskid/DISK-BHYVE-F485-E5AF-7C59p4. No tries left.
Enter passphrase for gpt/zfs0:
GEOM_ELI: Wrong key for gpt/zfs0. Tries left: 2.
Enter passphrase for gpt/zfs0:
GEOM_ELI: Wrong key for gpt/zfs0. Tries left: 1.
Enter passphrase for gpt/zfs0:
GEOM_ELI: Wrong key for gpt/zfs0. No tries left.
Trying to mount root from zfs:zroot/ROOT/default []...
Mounting from zfs:zroot/ROOT/default failed with error 2.
Loader variables:
vfs.root.mountfrom=zfs:zroot/ROOT/default
Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.
eg. ufs:/dev/da0s1a
zfs:tank
cd9660:/dev/acd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)
? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input
mountroot>
panic: mountroot: unable to (re-)mount root.
cpuid = 0
KDB: stack backtrace:
#0 0xffffffff80984e30 at kdb_backtrace+0x60
#1 0xffffffff809489e6 at vpanic+0x126
#2 0xffffffff809488b3 at panic+0x43
#3 0xffffffff809e7f5f at vfs_mountroot+0x1eaf
#4 0xffffffff808f03b3 at start_init+0x53
#5 0xffffffff8091244a at fork_exit+0x9a
#6 0xffffffff80d30d2e at fork_trampoline+0xe
Uptime: 4m16s
And, no, srsly, I don't need more than 9 tries to type "foobar".