lspci.txt
| 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) | |
| Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- | |
| Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+ | |
| Capabilities: [c4] HyperTransport: Slave or Primary Interface | |
| Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL- | |
| Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b+ | |
| Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- | |
| Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- | |
| Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- | |
| Revision ID: 3.00 | |
| Link Frequency 0: [d] | |
| Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- | |
| Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- | |
| Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- | |
| Link Frequency 1: 200MHz | |
| Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- | |
| Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- | |
| Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- | |
| Prefetchable memory behind bridge Upper: 00-00 | |
| Bus Number: 00 | |
| Capabilities: [40] HyperTransport: Retry Mode | |
| Capabilities: [54] HyperTransport: UnitID Clumping | |
| Capabilities: [9c] HyperTransport: #1a | |
| Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit- | |
| Address: 00000000 Data: 0000 | |
| 00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) (prog-if 00 [Normal decode]) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 | |
| I/O behind bridge: 0000e000-0000efff | |
| Memory behind bridge: fea00000-feafffff | |
| Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff | |
| Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| Capabilities: [50] Power Management version 3 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | |
| ExtTag+ RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ | |
| MaxPayload 128 bytes, MaxReadReq 128 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- | |
| LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <4us, L1 unlimited | |
| ClockPM- Surprise- LLActRep+ BwNot+ | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+ | |
| SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- | |
| Slot #2, PowerLimit 75.000W; Interlock- NoCompl+ | |
| SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- | |
| Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- | |
| SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- | |
| Changed: MRL- PresDet- LinkState- | |
| RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- | |
| RootCap: CRSVisible- | |
| RootSta: PME ReqID 0000, PMEStatus- PMEPending- | |
| DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+ | |
| DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- | |
| LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- | |
| Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- | |
| Compliance De-emphasis: -6dB | |
| LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- | |
| EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- | |
| Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit- | |
| Address: 00000000 Data: 0000 | |
| Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14 | |
| Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ | |
| Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> | |
| Capabilities: [190 v1] Access Control Services | |
| ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+ | |
| ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- | |
| Kernel driver in use: pcieport | |
| 00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode]) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 | |
| I/O behind bridge: 0000d000-0000dfff | |
| Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff | |
| Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| Capabilities: [50] Power Management version 3 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | |
| ExtTag+ RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ | |
| MaxPayload 128 bytes, MaxReadReq 128 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- | |
| LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Latency L0 <4us, L1 unlimited | |
| ClockPM- Surprise- LLActRep+ BwNot+ | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- | |
| SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- | |
| Slot #4, PowerLimit 75.000W; Interlock- NoCompl+ | |
| SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- | |
| Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- | |
| SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- | |
| Changed: MRL- PresDet- LinkState- | |
| RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- | |
| RootCap: CRSVisible- | |
| RootSta: PME ReqID 0000, PMEStatus- PMEPending- | |
| DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd+ | |
| DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- | |
| LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- | |
| Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- | |
| Compliance De-emphasis: -6dB | |
| LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- | |
| EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- | |
| Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit- | |
| Address: 00000000 Data: 0000 | |
| Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 5a14 | |
| Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ | |
| Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> | |
| Capabilities: [190 v1] Access Control Services | |
| ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+ | |
| ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- | |
| Kernel driver in use: pcieport | |
| 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) | |
| Subsystem: ASUSTeK Computer Inc. Device 84dd | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32 | |
| Interrupt: pin A routed to IRQ 19 | |
| Region 0: I/O ports at f040 [size=8] | |
| Region 1: I/O ports at f030 [size=4] | |
| Region 2: I/O ports at f020 [size=8] | |
| Region 3: I/O ports at f010 [size=4] | |
| Region 4: I/O ports at f000 [size=16] | |
| Region 5: Memory at feb0b000 (32-bit, non-prefetchable) [size=1K] | |
| Capabilities: [70] SATA HBA v1.0 InCfgSpace | |
| Capabilities: [a4] PCI Advanced Features | |
| AFCap: TP+ FLR+ | |
| AFCtrl: FLR- | |
| AFStatus: TP- | |
| Kernel driver in use: ahci | |
| 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32, Cache Line Size: 64 bytes | |
| Interrupt: pin A routed to IRQ 18 | |
| Region 0: Memory at feb0a000 (32-bit, non-prefetchable) [size=4K] | |
| Kernel driver in use: ohci-pci | |
| 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32, Cache Line Size: 64 bytes | |
| Interrupt: pin B routed to IRQ 17 | |
| Region 0: Memory at feb09000 (32-bit, non-prefetchable) [size=256] | |
| Capabilities: [c0] Power Management version 2 | |
| Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Bridge: PM- B3+ | |
| Capabilities: [e4] Debug port: BAR=1 offset=00e0 | |
| Kernel driver in use: ehci-pci | |
| 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32, Cache Line Size: 64 bytes | |
| Interrupt: pin A routed to IRQ 20 | |
| Region 0: Memory at feb08000 (32-bit, non-prefetchable) [size=4K] | |
| Kernel driver in use: ohci-pci | |
| 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32, Cache Line Size: 64 bytes | |
| Interrupt: pin B routed to IRQ 21 | |
| Region 0: Memory at feb07000 (32-bit, non-prefetchable) [size=256] | |
| Capabilities: [c0] Power Management version 2 | |
| Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Bridge: PM- B3+ | |
| Capabilities: [e4] Debug port: BAR=1 offset=00e0 | |
| Kernel driver in use: ehci-pci | |
| 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller | |
| Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40) | |
| Subsystem: ASUSTeK Computer Inc. Device 8444 | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32, Cache Line Size: 64 bytes | |
| Interrupt: pin A routed to IRQ 16 | |
| Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K] | |
| Capabilities: [50] Power Management version 2 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Kernel driver in use: snd_hda_intel | |
| 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 64 | |
| Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 | |
| Memory behind bridge: fe900000-fe9fffff | |
| Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI]) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32, Cache Line Size: 64 bytes | |
| Interrupt: pin C routed to IRQ 18 | |
| Region 0: Memory at feb06000 (32-bit, non-prefetchable) [size=4K] | |
| Kernel driver in use: ohci-pci | |
| 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Bus: primary=00, secondary=04, subordinate=05, sec-latency=0 | |
| I/O behind bridge: 0000c000-0000cfff | |
| Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| Capabilities: [50] Power Management version 3 | |
| Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | |
| ExtTag+ RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ | |
| MaxPayload 128 bytes, MaxReadReq 128 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- | |
| LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <64ns, L1 <1us | |
| ClockPM- Surprise- LLActRep+ BwNot+ | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- | |
| RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- | |
| RootCap: CRSVisible- | |
| RootSta: PME ReqID 0000, PMEStatus- PMEPending- | |
| DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd- | |
| DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- | |
| LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- | |
| Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- | |
| Compliance De-emphasis: -6dB | |
| LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- | |
| EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- | |
| Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ | |
| Address: 0000000000000000 Data: 0000 | |
| Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0000 | |
| Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ | |
| Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> | |
| Kernel driver in use: pcieport | |
| 00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI]) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32, Cache Line Size: 64 bytes | |
| Interrupt: pin A routed to IRQ 22 | |
| Region 0: Memory at feb05000 (32-bit, non-prefetchable) [size=4K] | |
| Kernel driver in use: ohci-pci | |
| 00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI]) | |
| Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32, Cache Line Size: 64 bytes | |
| Interrupt: pin B routed to IRQ 23 | |
| Region 0: Memory at feb04000 (32-bit, non-prefetchable) [size=256] | |
| Capabilities: [c0] Power Management version 2 | |
| Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Bridge: PM- B3+ | |
| Capabilities: [e4] Debug port: BAR=1 offset=00e0 | |
| Kernel driver in use: ehci-pci | |
| 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 | |
| Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Capabilities: [80] HyperTransport: Host or Secondary Interface | |
| Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- | |
| Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b+ | |
| Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- | |
| Revision ID: 3.00 | |
| Link Frequency: [d] | |
| Link Error: <Prot- <Ovfl- <EOC- CTLTm- | |
| Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- | |
| Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- | |
| 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 | |
| Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 | |
| Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 | |
| Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Capabilities: [f0] Secure device <?> | |
| 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 | |
| Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 | |
| Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/R9 280X] (prog-if 00 [VGA controller]) | |
| Subsystem: Gigabyte Technology Co., Ltd Device 254d | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Interrupt: pin A routed to IRQ 10 | |
| Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] | |
| Region 2: Memory at fea00000 (64-bit, non-prefetchable) [size=256K] | |
| Region 4: I/O ports at e000 [size=256] | |
| Expansion ROM at fea40000 [disabled] [size=128K] | |
| Capabilities: [48] Vendor Specific Information: Len=08 <?> | |
| Capabilities: [50] Power Management version 3 | |
| Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 | |
| DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited | |
| ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ | |
| MaxPayload 128 bytes, MaxReadReq 512 bytes | |
| DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- | |
| LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us | |
| ClockPM- Surprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
| DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported | |
| DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled | |
| LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- | |
| Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- | |
| Compliance De-emphasis: -6dB | |
| LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- | |
| EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- | |
| Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ | |
| Address: 0000000000000000 Data: 0000 | |
| Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> | |
| Capabilities: [150 v2] Advanced Error Reporting | |
| UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
| UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
| UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- | |
| CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ | |
| CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ | |
| AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- | |
| Capabilities: [270 v1] #19 | |
| Capabilities: [2b0 v1] Address Translation Service (ATS) | |
| ATSCap: Invalidate Queue Depth: 00 | |
| ATSCtl: Enable-, Smallest Translation Unit: 00 | |
| Capabilities: [2c0 v1] #13 | |
| Capabilities: [2d0 v1] #1b | |
| 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series] | |
| Subsystem: Gigabyte Technology Co., Ltd Device aaa0 | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Interrupt: pin B routed to IRQ 72 | |
| Region 0: Memory at fea60000 (64-bit, non-prefetchable) [size=16K] | |
| Capabilities: [48] Vendor Specific Information: Len=08 <?> | |
| Capabilities: [50] Power Management version 3 | |
| Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 | |
| DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited | |
| ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ | |
| MaxPayload 128 bytes, MaxReadReq 512 bytes | |
| DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- | |
| LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us | |
| ClockPM- Surprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
| DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported | |
| DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled | |
| LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- | |
| EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- | |
| Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ | |
| Address: 00000000feeff00c Data: 41e1 | |
| Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> | |
| Capabilities: [150 v2] Advanced Error Reporting | |
| UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
| UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
| UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- | |
| CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ | |
| CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ | |
| AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- | |
| Kernel driver in use: snd_hda_intel | |
| 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09) | |
| Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Interrupt: pin A routed to IRQ 73 | |
| Region 0: I/O ports at d000 [size=256] | |
| Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K] | |
| Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K] | |
| Capabilities: [40] Power Management version 3 | |
| Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ | |
| Address: 00000000feeff00c Data: 4142 | |
| Capabilities: [70] Express (v2) Endpoint, MSI 01 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us | |
| ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- | |
| MaxPayload 128 bytes, MaxReadReq 512 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- | |
| LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us | |
| ClockPM+ Surprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
| DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported | |
| DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled | |
| LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- | |
| Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- | |
| Compliance De-emphasis: -6dB | |
| LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- | |
| EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- | |
| Capabilities: [b0] MSI-X: Enable- Count=4 Masked- | |
| Vector table: BAR=4 offset=00000000 | |
| PBA: BAR=4 offset=00000800 | |
| Capabilities: [d0] Vital Product Data | |
| No end tag found | |
| Capabilities: [100 v1] Advanced Error Reporting | |
| UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
| UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
| UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- | |
| CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- | |
| CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ | |
| AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- | |
| Capabilities: [140 v1] Virtual Channel | |
| Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 | |
| Arb: Fixed- WRR32- WRR64- WRR128- | |
| Ctrl: ArbSelect=Fixed | |
| Status: InProgress- | |
| VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- | |
| Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- | |
| Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 | |
| Status: NegoPending- InProgress- | |
| Capabilities: [160 v1] Device Serial Number 1d-00-00-00-68-4c-e0-00 | |
| Kernel driver in use: r8169 | |
| Kernel modules: r8169 | |
| 03:06.0 Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R | |
| Subsystem: ASUSTeK Computer Inc. Device 84e2 | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes | |
| Interrupt: pin A routed to IRQ 21 | |
| Region 0: Memory at fe900000 (32-bit, non-prefetchable) [size=64K] | |
| Capabilities: [40] Power Management version 3 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Kernel driver in use: rt2800pci | |
| 04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) (prog-if 00 [Normal decode]) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Bus: primary=04, secondary=05, subordinate=05, sec-latency=32 | |
| I/O behind bridge: 0000c000-0000cfff | |
| Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ | |
| Address: 0000000000000000 Data: 0000 | |
| Capabilities: [78] Power Management version 3 | |
| Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [80] Express (v1) PCI/PCI-X Bridge, MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | |
| ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry- | |
| MaxPayload 128 bytes, MaxReadReq 512 bytes | |
| DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend- | |
| LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <2us | |
| ClockPM- Surprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- | |
| Capabilities: [c0] Subsystem: Device 0000:0000 | |
| Capabilities: [100 v1] Virtual Channel | |
| Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 | |
| Arb: Fixed- WRR32- WRR64- WRR128- | |
| Ctrl: ArbSelect=Fixed | |
| Status: InProgress- | |
| VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- | |
| Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- | |
| Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 | |
| Status: NegoPending- InProgress- | |
| 05:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] | |
| Subsystem: ASUSTeK Computer Inc. Virtuoso 100 (Xonar Essence STX) | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 32 (500ns min, 6000ns max) | |
| Interrupt: pin A routed to IRQ 20 | |
| Region 0: I/O ports at c000 [size=256] | |
| Capabilities: [c0] Power Management version 2 | |
| Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- | |
| Kernel driver in use: snd_virtuoso |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment